I try to install in Windows update and they fail. He said cannot acess Windows install.

Similar Questions

• Fresh install of Windows 8 the new SSD and Windows update found 127 updates and they failed with error code 80248007

  I've been struggling for weeks to try to get my computer Windows 7 update to Windows 8.1. It is not interesting to go in full history frustrating because I gave the update and now I just try to start over again. The recent measures and current situation is as follows:

  1 PC is powerful enough with i7 and 16 GB chip.

  2. new SSD this week.

  2. freshly downloaded Windows 8 Pro ISO burned to a DVD and checked.

  3 Ran install successfully and signed using my Microsoft Account.

  4 tried Windows Store for Windows 8.1, but said I need updates.

  4 Ran Windows Update in Control Panel.

  5. Windows update found 127 updates and they failed with error code 80248007.

  I don't understand how I can get these failures with a new facility.

  Any help will be greatly appreciated. Thank you all in advance!

  Hello

  Glad you got it going... If I had to guess, it was very likely updates .net 3.5, which has caused the problem... or maybe, Net 4.5...

  They require a process runs to complete their installation that seems to start running in the middle of updates remaining to try to install...

• try to install 2 updates and it fails saying unknown error 8007064 C and 64 c?

  I tried to install 2 updates and they both say impossible to install it gives me unknown error 8007064 C and C. 64 understand not

  Thank you Jean Linhart

  Hello

  1. which windows update you are installing?

  2 are you able to install other updates to windows?

  3. have you made changes on your computer?

  I also suggest you to follow the link to the error 8007064 and 64 C

  Error code when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0x8007064C.

  http://support.Microsoft.com/kb/958055

• I have Acrobat 11 Pro installed.  When I try to open a PDF file and edit it, I said I have to pay a monthly subscription to do.  What the hell?

  When I try to open a PDF file and edit it, I said I have to pay a monthly subscription to do.  What the hell?

  Hi michaelj85983522,

  Since when are you facing this problem?

  I checked your account details and I see that you have a valid license of Acrobat, you sure you edit file in Acrobat and not in the reader?

  I recommend you to contact the customer about this issue: contact customer service

  Kind regards

  Rahul

• just did the update and they gave me 'bing', 'montageobox' and "the innkeeper", what is this sh - t?

  Just did the update and they changed my opening page, my search engine 'bing' added 'montageobox' and 'innkeeper '.

  That stinks?    Happened to someone else?     Saul

  Not possible, you must do something wrong. Are you still using 10.7.4?

• I bought the plan for photography and still pay each month. but I can't use photoshop only after update. and they need to join a plan. How can I do? I can only use for the trial version even I never tell months.

  I bought the plan for photography 6 months ago and still pay every month.

  but I can't use photoshop only after update. and they need to join a plan.

  How can I do?

  I can only use for the same test version that I pay every month.

  Hi yejik42305752,

  Please see the following article: https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  Kind regards

  Tanuj

• I try to install the windows update and get error code 8E5E03FB. There are 4 total updates and they all failed. Anyone know what I need to do? __

  I try to install 4 updates to window that are considered important. I get error code 8E5E03FB. When I search what to do there is no specific answer to this error code. Anyone know what to do?

  Reset Windows Update components: http://support.microsoft.com/default.aspx/kb/971058

  Put the computer to boot: http://support.microsoft.com/default.aspx/kb/331796
  Then try to update windows.

  All the best!

• Start of Windows to install updates and then fail, restores the installation then the cycle starts again.

  original title: I continue to receive updates for Windows. Updates begin to install fail, updates to day is awarded automatically installation and then the cycle starts again.

  This process takes about an hour, during which I can't use the laptop.

  Hello

  ·         Update is causing the problem?

  ·         You get the error message?

  Method 1:

  Try to install the update to the clean boot and check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135/en-us

  Note: Don't forget to start your machine in normal mode by following step 7 of the link.

  Method 2:

  You can try temporarily turning on all security software and then try the updates again.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

   

  Also refer to this article and check if it helps:

   

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• When start Fable 3 asks to install the update and it fails error code 0 x 80070002

  Original title: problem loading Fable III

  I recently bought Fable III and installed.

  When loading the game, I said that I need to connect to Windows Live to play. I put in my Windows Live account information, it displays a message telling me it is download my profile and then another message appears telling me I need to install an update to continue. When I try to install the update however, it tells me that failure, citing the code 0 x 80070002. And then told me that I need to connect to play but when I try to do, it tells me my profile has not been downloaded and I need to go into the details of my account again. I do this, and then the whole cycle starts again.

  Any help to solve this problem would be welcome. Thank you.

  Hello

  ·         The installation of Fable was successful?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can try the steps that are listed in Microsoft Knowledge Base article and check if it helps.

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services

  http://support.Microsoft.com/kb/910336

   

  Method 2: I suggest to read the following article and check.

  Error message when you try to update a Microsoft Windows-based computer: "0 x 80070002.

  http://support.Microsoft.com/kb/922582

   

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.

  http://support.Microsoft.com/kb/956698

  Let us know if that helps.

• Windows XP Pro does not install updates. They fail repeatedly.

  UPDATES WINDOWS DOWNLOAD OK, BUT THEN WHEN I TRY TO INSTALL ILS HANG. MOST UPDATES THAT ARE HANG WITH A NET. I TRIED THE FIX FOR UPDATE TOOL AND HE COULDN'T FIND ANYTHING WRONG.

  Hello

  1. What is the description which are impossible to install updates?

  2. What is the message exact error do you get when installing windows update?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to reset components to update Windows from the following link and then try to install the updates.

  http://support.Microsoft.com/kb/971058

  Method 2:

  Also try to set up your computer in a clean boot state, and check if the same issue occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

   

  Method 3: If the problem persists then try to install updates manually from the Microsoft Download Center.

  a. go to the Microsoft Download site, type the number of "KB" of the update in the download search box and then click OK.

  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

  d. When you are prompted, click open to install the update.

  Hope this information is useful.

• The game I played request now that I log in as administrator and update and upgrade fails

  * O.T. > Winddows 7

  Two issues have appeared recently. One: the game I played (solo, not online) now the queries that I log in as an administrator. I am the administrator! Two: Despite many attempts to download updates and upgrade to Windows 10, nothing happens!

  Help!

  Thank you

  Right click on the executable file for the game, and then click Run as administrator.

  You can also try upgrading Windows 10 manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Firefox starts up. Said 'it's embarrassing... "but do not restore or close because never answers. Updated and restart without help. Cannot access the options.

  Unresponsive. Updated and rebooted without success. Can't seem to 'options' due to no response. Always 'it's embarrassing... "but to restore or close button ends up making inadmissible browser. Closed with Taché also. Can't get into safe mode.
  BP-20b2f065-d592-4b67-8020-7714a2130305

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• Hi I am trying to install updates, and they will not install an error found Code 643 Windows Update encountered an unknown error

  Help

  Tracey,

  http://support.Microsoft.com/kb/555375

  You can watch the following article to see if this will help with the error 643.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643 

  http://support.Microsoft.com/kb/946414

  During the installation of .net Framework updates with Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982>

  If no joy, of the article in the Knowledge Base for ALL the .NET security updates:

  "How to get help and support for this security update

  For home, users visit Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts. "

  Let us know if this helped.

• How to install the missing dll files when I try to get latest microsoft updates and get the error msg ox8024D007

  I can also access my control panel, but when I try to add/REMOVE a program it says that is missing a required dll file

  You could try auto fixit or manually install the microsoft update agent.

  http://support.Microsoft.com/kb/949104

  Or refer to the knowledge base article:

  http://support.Microsoft.com/kb/956701

  Agent update for the x 86 system.

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

  The updateagent for x 64-based system.

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x64.exe

  I hope this helps.

• I try to install the updates, but they fail - error code is 80070005.

  Let me start that I'm computer illiterate until a point and it becomes very frustrating...

  I use Windows Vista Service pk2

  I went and deleted temporary files and all requested without success.

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate.  What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. Save the file on your desktop zip and extract the file:
     -Right-click on the file and select extract all...
     -Click Next when prompted for the Destination.

     Therefore, you should see a folder called AccessChk on your desktop.

  3. Open the folder AccessChk

  4. Hold the SHIFT key and right-click in the window.  Select "open here command prompt.

  5. A command prompt window should open a similar message:
     C:\Users\\Desktop\accesschk >

  6. Type the following command and press ENTER:
     "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
     Tip: You should be able to copy and paste the command into the command prompt.

  7. Close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. Double-click Accesschk.txt (text file), it should open Notepad.

  9. Copy and paste your results with a new question in the forum of Windows Update.  (Make sure that you write 0x80070005 in the subject).

  Reference1

  If this is not enough: -.

  1. If please download the subinacl.msi from the following link and save the patch to installation on the desktop:
      
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
     SubInACL (SubInACL.exe)
     SubInACL is a command line tool that allows administrators to get the security information on files, registry keys, and services, and the transfer of information from one user to another, from local or global group to and from a domain to a domain.

  2. Please, go to the desktop and double-click on the downloaded file.

  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. Click the "Start" button in the "Search" bar, type: "Notepad" (without the quotes) and press ENTER.

  5. Copy the following commands, and then paste them into the opened Notepad window:
      
     off @echo
      
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
     Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
      
     @Echo =========================
     Completed @Echo.
     @Echo =========================
  
  @pause
• After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
• View the desktop and right click the reset.bat file, then choose "Run as Administrator".
• You will see a window of type BACK treatment.
   

NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

Reference2

This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

Notes are answers Microsoft support engineers
Support for Windows Vista technical and troubleshooting problems
Microsoft Help and Support