I try to use develop it but it shows me blue screen

Similar Questions

• Development module of Lightroom showing the blue screen...

  Hello need help with the blue screen

  Hello. I just installed lightroom cc on a new computer and the mod to develop is blue. I can see everything except the picture. IT IS NOT a white x or the line through it? Help please

  Post edited by: Jitendra Khatwani

  Hi renatacapotorto,

  Greetings!
  This can be cause of cars graphic.

  Please, try the following steps:

  Open Lightroom

  Click on edit-> preferences-> Performance (Windows) OR Lightroom-> preferences-> Performance (MAC)

  Uncheck the box use graphics processor.

  Click OK

  Relaunch Lightroom and check now.

  Also try to update the graphics driver on the seller's website.

  Concerning

  Jitendra

• Photo shows in the library but when I opened to develop that it shows a blue screen with a cross diaginal

  Photo shows in the library but when I opened to develop that it shows a blue screen with a cross diaginal

  Go to preferences > Performance tab and uncheck the option "use graphics processor. Adobe is aware of this problem and are studying, but in the meantime to uncheck this option should your unit develop problems.

• When I try to develop my photos I get a blue screen, but the browser will display my image?

  I am running the latest version of lightroom, but I don't see my image in the pane to the point, it shows only a blank blue screen, however you can see the image on the part of the browser on the left?

  Anyone know what I am doing wrong?

  Hi andrewa.

  It seems to be a problem because of the graphics processor.

  Go to the Lightroom preferences > performance > uncheck 'use graphics processor' and then check.

  Kind regards

  Claes

• I downloaded LR6 to a new HP Pavilion computer and when I try to change in developing all I get is a blue screen. Photos are .dng when I click on the before / after button, I get a partial view of the picture and the part is still the blue light in the re

  I downloaded LR6 to a new computer HP Pavilion. 10 windows and when I try to change in developing all that I get is a blue screen. Photos are .dng but when I click on the before / after button, I get a partial view of the picture and the part is still the blue light in the rear section. When in the module library, photography is able to be seen, but as soon as I click on the development, I see a flash of the photo and then the screen is all blue where I would like to see the photo. I opened both the old and the new computer and against each element and they are identical with the exception of the blue screen. I wonder if it has something to do with the magnifying glass?

  Go in Edition > Preferences > Performance and uncheck CPU graph use.

• IM the administrator of my computer but can't seem to access my account have to use children account, because I have this blue screen, cant even log on to safe mode? How can I solve this problem?

  can't get into my accont blue screen, peuvent ' t do it on safe mode, so I have no administrative privledges, how can I solve this problem? Help

  Hello

  1. What is the exact error message you get with the blue screen?

  Follow these steps and check if the problem persists.

  Step 1:

  Remove all external devices such as printers, USB drives and check if the problem persists.

  Step 2:

  Check if you are able to start in "last known good configuration".

  How to start your computer by using last good known Windows XP Configuration
  http://support.Microsoft.com/kb/307852

• restarting my computer on windows xp load screen when I try to boot from the disc, I get a blue screen can someone help me?

  Recently, I restarted my computer and received the following message is displayed:

  "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  If your computer stopped responding, restarted unexpectedly, or was automatically closed down to protect your files and folders, select last good known Configuration to return to the most recent settings that worked.

  If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button has been activated, or if you are not sure what caused the problem, choose Start Windows
  Normally.

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Last good Configuration known (your most recent settings that worked) start Windows normally

  Use top and down arrow keys to move the selection of your choice.
  .
  Seconds until Windows starts: 30 "

  After I tried all the options available, but whenever I do it, windows is only a blue Flash of a screen and then brings back me to the same menu over and over again.

  I can NOT CONNECT AT ALL even in safe mode (by connection, I mean I can't access the section Office at all - case im explained does not this right). as soon as it reaches the load to windows xp my computer screen restarts as if I am the ' turn off and turn back on.

  I tried to perform a repair of Windows through my cd of instalation installation, but it just took me a blue screen saying there was a problem and he had to shut down to avoid damage. He also told me this: * 0x0000000a (0x00000002, 0x00000000, 0 x 00000018, 0x80819b92)

  The computer is an emachine and was purchased at a walmart nearly 5 years ago and it worked fine until one day it started to do this. I can't access any of my files or anything. It must be a software problem, because since then I checked all the problems of material possible and found nothing. the result of this is that I can't use my computer. It is a desktop computer and was reliable until it happened. I'm not sure of the cause, and I think it's something wrong with the operating system. I have tried everything I know and need help as soon as possible.

  Hi josiahgenesis,

  ·         Have you been able to launch the repair facility?

  Try the following.

  Method 1: Try to select disable automatic system failure reboot from the advanced boot menu options to see if it helps.

  Method 2: Check to see if the following is useful.

  You receive an error message "Stop 0x0000000A" in Windows XP

• Installed Windows 7 on my netbook but keep getting the blue screen while surfing Web sites

  Hello!

  First of all, this is my first post time on these forums, I often read them and think they are great!

  Now on to my question, I recently installed Windows 7 on my LG x 110 netbook. I ran the windows Upgrade Advisor 7 and confirmed that my netbook managed to all the minimum requirements for a 32-bit install. After installing Windows 7 my pc works perfectly (better than XP in fact) has installed all of the drivers needed to run automatically unless the driver for my microphone and my 3gs integrated internet which I managed to resolve. The only problem I have is sometimes while surfing the web, I get the blue screen of death and my netbook restarts. I was not able to understand by myself am so regarding this forum hoping to repair... I contacted LG for information on downloading upgraded drivers, but got a response from them saying that my pc is not supported with drivers for windows 7. Here is some information from the Center problem with Windows 7, I don't know if it's necessary info, please tell me where to find the correct information and how to access it.

  Problemsignatur

  Information additional om problemet

  BCCode: c2

  BCP1: 00000007

  BCP2: 00001097

  BCP3: 8078AE94

  BCP4: 8078AE74

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 256_1

  Bucket ID: 0xc2_7_RTL8187Se! PlatformFreeMemory + 1 b

  ServerInformation: 47840a85-d17f-4bd7-8fa5-f385071573a0

  Any help is greatly appreciated as I really want to re - install Windows XP because Windows 7 runs so well, even on a low technical specifications.

  Handelsenamn: BlueScreen

  OS version: 6.1.7600.2.0.0.256.48

  Sprakvariant-ID: 1053

  It seems that you have a C2 Bad Pool Caller error, which is difficult to analyze without the minidump file.  If you googled around and find WinDBG, you can open the minidump file.

  Look for the line: nom_image: it will tell you exactly what file has caused the error.  If all goes well, once you find exactly what caused the error, you can search for updated drivers/software.  At first glance, I would say it was the Realtek drivers because you see the line RTL8187Se in your info.

  My MSI Wind U100 netbook works also Win7 perfectly.  Double boots with MacOSX too, just because I wanted to see if I could do it.  I change the hard drive (for a bigger) and added the RAM.  Nothing low spec thereon compared to what was needed for WinXP when it came out!

  Try this driver, it should do the trick.  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PFID=40&level=5&Conn=4&ProdID=172&DownTypeID=3&GETDOWN=false&downloads=true

  And since this is the NETWORK/connection wireless card driver, he explains why the errors come during surfing!

• I can't find purchase modules file in my computer so I can't import into Lr I have try to use Adobe Extension, but it still does not.

  

  It presents in the creative cloud it was installed but I can not find the file in the download folder or anywhere else. What should I do to install this in my Lr.

  I try Adobe Extension but doesn't have too much work.

  We have identified a delay in obtaining products on Windows machines, in which case a reboot is required to start the installation of the product. We are investigating this. For Lightroom products, it is best to use only the CC Desktop App - available from http://creative.adobe.com/products/creative-cloud, rather than the extensions Manager.

• [NMH300] Try to use Vista backup, but what is the name of user and password to drive Z?

  I use the pole NMH300 media and I want to create a backup process this file copies on drive Z (media Division) and Vista backup invites me for the username and password for the drive Z, which is funny because I never enter a username or password to access this disk , and the more I use a password only to access the media hub File Explorer but I've never had to enter a user name.  What Miss me?

  Thanks in advance.

  Joey

  The utility of backup Vista encrypts the data on the hard drive using the security feature of NTFS format and I think it will not be able to do that if you go back up to the mediahub since its already a different device with a different file for its Reader format. Vista Backup utility is intended only then to NTFS formatted disks so that it can encrypt/secure data being saved. Just use the NTI Shadow backup tool to backup your files, it's a good tool.

  Backup NTI Shadow

  See you soon.

• 0x0000007B, Vista after special Pack 2 installed, go to the Startup Repair, but still comes with Blue Screen of Death

  Cannot start in safe mode, want to recover the data (documents, photos, etc.) if possible and then restore.  No points of restoration or available backups.  And the Special Update Pack 2 came, had no problems with it or would not have allowed.  Any ideas?

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Media Player will not play mp4 or mpeg1 files. When I try the system crashes and it goes to the blue screen of death

  I'm running a quad core with 8 GB of windows 7 with office 2013 RAM.  All are clean installs.  When I try to play a video file on Media player my system breaks down and made a memory dump.  This also happens when I try and put a video in PowerPoint.  I am able to play these videos on QuickTime on the same machine.  The videos play fine on another machine of Windows 7 office 2013.  We use this system for presentations churches.

  Can anyone help?

  Hello

  1. Do you have an error message when you play this video?
  2. What Media Player do you use?
  3. Did you recent hardware or changes to the software to the computer before the show?

  I suggest using Windows Media Player, then try the following steps. This problem may occur because of codecs. A codec is a software to compress or decompress a digital media file, such as a song or a video. Windows Media Player and other programs use codecs to play and create digital media files.

  You can refer to the suggestion made by Rohit Chettri in the following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-Media-Player-will-not-play-MPG-files/16145802-7e2b-4BD0-a81f-c58c54588d26

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• I installed Lightroom 6. After you import a photo that I pressed the tab 'developing', all I get is a blue screen. Help, please.

  I can still develop my pix

  This has been asked and answered repeatedly... the forum has a search function... Tip Forum #1 on the main page of the forum hereLR.

  Disable GPU acceleration: using Adobe Photoshop Lightroom | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom

• Layers hidden in Photoshop, but it shows picture on screen

  Hello. Using PSCS4 under XP.

  I have a Photoshop document done by someone else that I'm opening. There are 5 layers. 3 are hidden. When I hide all the layers, the image still appears on the screen. In the layers palette, I see Unify: with 3 icons and click on spread image1 is checked. I don't think I've ever seen that before in the layers palette. Below, I have a picture of what's going on. Don't know if there is a way to set up a file like this when you start a new document or what, but it's happening. all hidden layers, but the image appears. If all goes well, I'm missing something

  

  Better control panel layers, it seems that spot for me.

  If your image is in RGB, then I guess that it is red, green, blue... and another thing, something like 1 Spot or Pantone color blablabla.

  If you never want to see it just move to the trash icon in the Panel layers and you'll get "cleen" image (I wonder why it does that). Or you can use Merge Spot channel from the menu of channels that will blend (separated) he in RGB.
  

• Vista home office backgroud loads but dosent show on the screen until I connect

  HP pavalion dv 2000

  You are welcome.