I tunes will not install correctly

Similar Questions

• "I tunes is not installed correctly. Please re - install. "(Error Windows 7-998)

  Original title: Please help, receiving the error msg in windows when you try to use I-tunes
  
  Windows keeps giving me the message "I-tures is not installed correctly. Please re - install. "(Error Windows 7-998). I tried to re - install I-tunes several times, but the Installer seems to be difficult to remove completely and whole system crashes and I have to restart the computer. All this happened when I installed an another norton 360 version 4.0 to replace an expired norton 360 version 4.0 and I was online with them for a long time and they said that this has nothing to do with their software. I'd appreciate any help I can get, thanks

  Hi Matthew,

  It seems that the new version of Norton blocking somehow windows install to work properly.

  I suggest you temporarily uninstall Norton of the machine and then try to uninstall I-tunes of the machine. You can use the Norton removal tool to accomplish the same thing.

  (NOTE: please reinstall your security program once the problem is resolved.)

  Once you are able to uninstall I-tunes, you can go ahead and try to reinstall the same.

  http://www.Apple.com/iTunes/

  Hope the helps of information.

• updates will not install correctly returning not configured windows message reads

  I contacted microsoft several times about this problem? I have more than 500 updates will not be installed. get that message even windows not properly configure returning. I have vista installed on this computer if I update to a new version of windows 7 will run this fix, the problem

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• Flash Player will not install correctly on Mac

  I tried several times to install the latest version of Adobe Flash Player in my Mac 10.8.4 without success.  In fact, it installs, but does not give me the opportunity to accept your conditions (which I am willing to do).  When I try to open a file, it is black.  What should I do to make it work correctly?

  Marai,

  Hello

  want to thank you for your help. I was able to reload the version of the PC from the link you provided...

  I ordered the upgrade for this machine both 10.6...

  its good to know there are people like you who help out me...

  Thanks again!

  Best of all for you,

  Scott

• relocation of the agars recovery on computer laptop girls. Windows Vista Basic. Will not install correctly.

  Had to reinstall Windows Vista Basic on my laptop now girls probably 4 or 5 times over the past year.  A question is we get full and you get to a screen that says not to interrupt and cela will take a few minutes, which, on an attempt, I let it run all night and never went.  Finally, just let it load and put an end to the function and let him simply use the laptop.  Then after a few moments to use his laptop begins to freeze.  So, I have to go and try to reinstall its OS.

  If you restore so frequently, or at all, someone is something fundimentally incorrect and visit places / download infected files.

  Recover PC to factory specifications, winupdate turn off "recommended updates", but allow critical updates. Consult the manufacturer of your laptop and see if there are recommended updates shown there.

  Install a decent Anti Virus, MS Security Essentials is free. Do this before you install any programs or connect to the scocial network sites

• While a Canon MP360 printer will not install correctly.

  Hello

  I'm having trouble installing a model of Canon MP360 all-in-one Scanner/printer/copier.

  I managed to get the printer to print (using older drivers - Windows 2000/XP), but the scanner function does not work.

  If I go to a graphics program for example Photoshop Elements, the scanner device is not in the list choose enable analysis.  The same for Adobe Acrobat or something else where I should be able to scan documents, photos, etc.

  Vista does not recognize the printer/scanner pure and simple by just plug ' don't play.   He's trying to find the drivers but failed.

  If I have normal installation that is to install the software driver, then plug in the printer, the system tries to detect the hardware, but even once is unable to load the drivers and recognize the device correctly.

  Any advice would be helpful, thanks.

  I forgot to add: my OS is Vista Ultimate

  Thank you.

  Andrew.

  Andrew M

  http://www.Canon.com.au/en-AU/support-services/drivers-and-downloads

  You must find printer drivers Compatible Vista for her Canon and then follow the instructions on installing Canon.

  And here is a link to Suport for Canon;

  http://www.Canon.com.au/support-services

  See you soon

  Mick Murphy - Microsoft partner

• Try to install the driver, but will not install correctly, ArcSoft Photolmpression 6.

  Windows 7 no Photofix Copier of Summit, do not to install the driver properly error. Any help for this old surfer of money with the early stages of dementia would be much appreciated.
  Thanks to all who can help.
  Concerning
  TREV

  I think you will find that your Copier, Photfix, is not compatible with win7, according to many other messages from various sites.

  You could try the free trial of http://www.hamrick.com/ but be aware that if it works, and you decide to buy its probably at a cost similar to you buy a compatible scanner.

  BTW, the title line of your post is not really applicable to your question/problem.

• CC Adobe works on windows 10, nothing will not install correctly

  OK NONE of the applications will install properly on my windows computer 10 BRAND new. Support told me that I had to wait until Monday, so that someone who could help then disconnected from the chat session while I was responding. Is compatible with windows 10 CC of Adobe and should even bother trying to reach customers on Monday. Everything seemed to install, and then says that he has not completely installed.  When I reboot it looks like everything installed but when I try to open a first file that was created on another computer on my 2 month account, the system says that it cannot open the file because it was created with a NEWER version of first. It is not yet possible

  Run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• CC of Photoshop will not install correctly

  I just bought Photoshop and Lightroom and it keeps giving me a "Installation Failed" notice with the error:

  Exit code: 6

  Please see specific errors below for troubleshooting. For example, the ERROR:

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 2 error (s)

  -Payload: Package redistributable Microsoft Visual C++ 2012 (x 64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20}.

  ERROR: third charge useful Installer vcredist_x64.exe failed with exit code:-2147024546

  ERROR: Cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 64). Please try to install by double-clicking the executable file to "C:\Users\Lizzie\AppData\Local\Temp\{B159EB92-EC46-4C7D-92CF-372F1C216F46}\Lightroom_6_LS 11\payloads\Microsoft VC 2012 Redist (x 64) \vcredist_x64.exe", or download and install the 2012 Microsoft Visual C++ Redistributable Package last (x 64) Microsoft Web site - www.microsoft.com

  -------------------------------------------------------------------------------------

  I can not find this folder in my computer files either.

  Hello

  Greetings!

  Please, try the steps from the link below and check if it works for you.

  Errors ' Exit Code: 6, "" Exit Code: 7 "|"» CS5, CS5.5

  It will be useful.

  Let us know for other queries.

  Concerning

  Maansee

• Windows XP MCE will not install correctly

  I tried to re-install version OEM of MCE 2005 on a friends PC, it came with the PC OEM license. The installation is bug. First installation, it does not have all network protocols and the icon for the network connection has been totally absent.
  Reinstalled the 2nd time, the network protocols installed by closing sequence was absent IE; No button to offer standard options (shutdown, restart, log off user etc..). Because it is highly unlikely, the company that made the PC (not a brand like HP Enterprise) would have any more OEM disks for MCE 2005, how can I get this to work? Oh, and I checked the PC before I wiped it off and there was no recovery partition.

  Hello

  · That appear on the desktop after initial start-up?

  · You see the windows start button on the left corner of the screen?

  Try the following steps:

  a. press CTRL + ALT + DELETE

  b. Select Start Task Manager

  c. start a new task and verify the results

  With regard to:

  Samhrutha G S - Microsoft technical support.

• I tunes will not install

  When I try an install the lastest i tunes on my count it gets halfway through and says cannot install any programs because of the windows installer. any help

  Hello

  • What is the exact error message that you receive?
  • Does this happen with Itunes only?
  You can check this link:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651
   
  See also:
  http://support.Apple.com/kb/ht1926

• Brand new Aspire XC - 603G (ACX - 603 G-UW31). Windows 7 will not install in Legacy Mode

  Hello

  I am trying to configure a newly purchased office of Acer (Aspire ACX - 603 G-UW31), who has installed Windows 8.1, for my mother who cannot grasp the steep learning curve of Windows 7 to Windows 8.

  I have a licensed copy of Windows 7 x 64 on DVD, and even after the SecureBoot mode off then launch MSC forever and then starting with F12, by selecting the DVD drive as a boot device, Windows will not install correctly.

  The very first steps of the configuration are very well, it is, I'm asking the press actually starts to any key to boot from the DVD, Windows Setup loads some files, but the problem comes when the installation of Windows. I get a STOP error to the ASF with the message "The BIOS in this system is not fully complaint ACPI." There is no BIOS update for this model. That's the traditional way...

  Any ideas?

  Thank you, Nick

  

  All,

  I would like to announce, we have released an update of the BIOS that supports the element of 'Throw the CSM' in the BIOS Setup menu. Please visit http://www.acer.com/worldwide/ -> select your region-> click Support-> drivers and manuals-> select your product and then download the version of BIOS released on 15/09/2014 (or later version).

  Please be aware due to material limitations when MCS-mode you may experience some audio issues HDMI.

• OfficeJet J4580 not install correctly regardless of the method

  Long story short, I had to uninstall and reinstall evrything and like last time, it will not install correctly.

  The manual says to unplug the unit before installing the soiftware I did but it ended up installing without ever making me plg inside. I Reboot and "Document Manager" appears and I install other software from here - all except the picture one thing. But things do not work quite as it should. Doctor Scan and printing HP goes to its process and tells me "the comprehensive software solution for this product has not been installed" and then letting his work - install, I get an error without number, or something else to say simply: 'Download failed'. "." And 'Retry' will not work.

  For a HP technician on a Board here I try the following:

  Follow the steps below to update the software to the latest version.

  First step: clear temp directory

  1. tap folder in the race or search programs and files of field

  2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  3. proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-79309-1&cc=us&DLC=en&LC=en&...

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  The problem is not # 12: when uninstalling filled to restart the computer

  No uninstall never happens.

  In any case then by downloading the installer to complete the installation of the window program tells me to plug in my cable. Well guess what. It is plugged in, but somehow, he thinks that it is not (although any other tried suggests that another part of the HP "brain" knows it's as the other things would have happened if it is not plugged in)

  In any case I unplpug and reconnect, I reboot etc etc he still thinks that he's not pliugged in - even if step to ignore the "plug the cable into the part is taken.

  Back doctor's Scan and the same thing happens mentoned above.

  On my 1st installtion, way at the time where this printer gave me similar headaches, but many things were that it is impossible for me to rmember what finally worked.

  Oh yes my OS: Windows 7 Home Premium 64-bit

  Thank you

  I solved my problem on my own. Here's how:

  The method you mentioned has already been tried.

  The problem was, I think, to uninstall the HP OfficeJet J4580 and its software a lot, but a lot of files and folders remain and are scattered everywhere and not just in the Program Files folder. This is also true for the registry entries.

  So I was all uninstall again and this time made a search for everything under HP and Hewlett-Packard and remove all. After which I also used CCleaner to enter the remaining things in the windows registry - all carefully in all cases to ensure that I have do not uninstall, delete, or remove things dealing with my HP webcam.

  Doing so and after a few reboots installation again and this time things developed accordingly.

  I must say thatat first, it did not seem as if I had managed since the installtion software always kept thinking my HP wasn't pluggen in and connected. but he has been wrong on reboot everything has worked (except that I had to return to the installtion to install other software associated with it.

  Thanks for your help

• Impossible to install any programs, it says that my windows install is not installed correctly, but it will not let you install anything to fix. Help!

  the major difficulty. I can't install anyting because it keeps telling me that windows install is not installed correctly, so it will not allow anything to be mounted

  [Duplicate of http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/45b2ba57-1a5a-4d3f-99a1-431e414cf5b5] ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• WMP will play any WMA files say that it is not installed correctly

  When using napster using WMP it won't play any WMA files say that it is not installed correctly, BUT it can play MP3 files.
  I've used this for years and only by recent this problem started?

  Hello

  Follow these methods and check if that helps:

  Method 1:

  Follow the exact steps in the article to remove Windows Media Player 11, and then try to install it and check if it helps:

  How to uninstall Windows Media Player 11 in Windows XP

  http://support.Microsoft.com/kb/934372

  Method 2:

  You can also read this article and check if it helps:

  Resolution of the problems of reading in the Windows Media Player for Windows XP

  http://support.Microsoft.com/kb/306317

  See also:

  FIX: update for Windows Media Player 11 for Windows XP

  http://support.Microsoft.com/kb/939683

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509