I turn on my i mac I can hear it from, but remains a black screen

Similar Questions

• How do I turn off write-protection so I can transfer music from my pc to my sd card?

  I can't download music from my pc to the sd card in the phone.

  How do I turn off write-protection so I can transfer music from my pc to my sd card?

  Hello

  1. you have any problem with the SD card?

  2. What is the brand and model of the phone?

  3. you try to connect the cable or Bluetooth?

  4. you receive an error message?

  To transfer the music on the SD card, you will need to use a card reader that simply bouchera into your USB port.

  Once the card in the drive the computer will recognize as a reader. Go to my computer and click on it.

  Click on the SD card (which should appear once connected) and now you can drag and drop your songs on the SD card.

  I suggest you to see link and check. Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  I also suggest you to communicate with the manufacture of telephone support and check.

• I hope someone can help.my p7-1054 has a black screen

  I hope someone can help.my p7-1054 has a black screen

  Hello

  Follow the steps listed in the link below

  http://support.HP.com/us-en/document/c01896806

• Black screen when viewing of DTV, can hear the program, but no image.

  original title; Windows XP Media Center Edition 2005 - black screen when viewing of DTV, can hear the program, but no image.

  When I set up my Windows XP Media Center Edition PC to view DTV, I used the Setup etc., XP scanned and found all the available DTT channels. I thought as much, worked for BBC1, BBC2, worked, then I went to view ITV1 and other channels, could hear the noise perfectly, but there is no picture, just a black background. He used to work because I previously installed the computer. However, wouldn't be a difference that the TV signal will of the antenna, in a block of TNT, and then in the computer, there always used to work. I have that, it is not a signal problem because I could watch the TNT cable SCART on the computer and the image and the sound is fine just using the freeview box. It seems to be the Media Center. Please can someone help me? Thank you

  Apparently, this was caused by an outdated ATI graphics card driver. I recommend upgrading your graphics card driver to resolve this issue. Should work fine then

• I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  anesvet,
  I'm going to sound like I'm repeating myself tonight... (see previous 4 posts...)  but try this:

  When you start start pressing F8 until you get the Windows startup options.  Then try "Last known good configuration" see if that helps.  If this does not work, try to F * then try to go to Safe Mode.  If those who do not help, I would start with your XP CD to recovery mode and run "chkdsk/r" then "sfc/scannow".  QQ learn manage!

• How can I get my active headset so that people can hear me from my pc?

  So, how can I get the headphones to work where the people I call using google voice can hear my voice?  And how can I get the people I call the google voice, how can I get people that I can't hear sounds from youtube and google translate?  Thank you for all the answers.

  Hello

  (1) what is the brand and model of headphones?

  (2) is the specific question to Google Voice?

  If the problem is specific to Google Voice, I suggest you to contact the Support of Google to get better assistance.

  Here is the link: http://support.google.com/voice/?hl=en

  You can also see the following article for more information.

  Activate the sounds in cat helmet's life: http://support.Microsoft.com/kb/935749

• Can hear the movie but not see!

  Hi can anyone help, my brother has copied a movie to disc for me, when I open it with media player I can hear it but not see it. could be me being dim! any help is appreciated!

  Hi, thanks a lot for your help. My friend told me it may have been a MP4 file to download vlc player, I did and it has worked on this. My brother has copied the disc for me so I don't know what it allows to copy the disc or what format it was, Im not very technically aware! : s but it works now so woop! Thank you guys

• Dell Vostro 220 s turn on but only show black screen on desktop

  My 2008 late model Dell Vostro 220 s desktop with power on and go while the start and shows windows starting but when it will go on the desktop, it will just show a black screen. Any help would be nice!

  Thank you

  Darian C.

  You can try to start your 220 s in VGA mode (video low resolution).

  To start your computer in low video mode resolution, follow these steps:
  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.
  2. hold the F8 key as your computer restarts.
  3. in the Advanced Boot Options screen, use the arrow keys to select Activate video low resolution (640 × 480)and press enter.

  If the problem is not reappear low resolution mode, then the question is probably associated driver. You may be able to resolve this problem by updating the video driver with the latest version of Dell or Intel.

• My Mac Mini can be hacked from the Wifi?

  Hello!

  I was a proud owner of Mac Mini, less than a week. First of all, I would like to give my gratitude to Apple for creating this wonderful little tool.

  But as a long time Windows user, I ran into a problem I can't seem to find an answer to.

  I discovered that my Mac had opened a Wifi connection. And as a person, which is used for cables Ethernet (that I use now, too), the Wifi is unknown and not very liked territory.

  Was on WiFi, but marked "wifi is turned on, but is not connected to a network.

  N00b I am, am a little worried about this new link, began to bite it and found a lot of names, I understand where my neighbors Wifi connections. With my luck, I managed to hurt someone, who do not have their protected Wifi password and found myself suddenly watching "wifi is connected to the android ap and a IP [...]".

  I panicked as *, started trying to find a way to get rid of it and seemed finally to delete it after 3 minutes of the curse.

  Then, I turned off the wifi and changed to 'inactive' as well.

  My apologizes for the long text, but I'd love to hear the opinions of people who are not filled with panic as I am:

  1) when "wifi is turned on, but is not connected to a network", it means it is secure and no one can hack my wifi Mac?

  (2) when I entered accidentally someone another wifi unprotected for a few minutes, my Mac have been compromised?

  And the most important:

  (3) Changing wifi to be 'off' and then 'dormant', am I sure of any wifi hacking back? As there is zero connection wifi and no one outside could enforce on my Mac?
  

  I understand how stupid my questions can and no doubt make sound, but I'm inherently paranoid person and only one in my family, which has a semblance of agreement when it comes to computers, so there is no one to ask.

  I would be very grateful if someone could help me,

  Sincerely

  (1) Yes

  (2) No, just don't send any important information on an unprotected WiFi (passwords, credit card numbers etc.)

  (3) Yes

• I just cleaned the gills vacuum in my desktop iMac computer and removed and cleaned where is ram and now my iMac does not illuminate and the screen is black. My external hard drive turns on and I can hear it running, but that's all. Any ideas. I'm devasta

  I thought I was doing the right thing, but now it is clear that I was not properly clean even if I was very gentle. Why the screen lights up or really light up at all. Completely black and the keyboard does not light either. Someone has an idea? Thank you

  Unfortunately, vacuums are very statically charge and their use within electronic devices is usually not a good idea. It is very possible that the discharges of static electricity has damaged your iMac.

  I hope that you unplugged the iMac before cleaning. Make sure that the iMac is reconnected.

  Hold the Apple store nearest to the assessment of the iMac.

• Sound recording PlayI can hear my voice, but it is so small and it is loud noice in the background

  I just downloaded Skype on my computer, when I did the test call the sound is very clear, but when I made my appeal I do not what I say on the test there is a loud noise in the background

  Hello

  I would suggest trying the following steps and check if it helps.

  Method 1:

  Try to run the store and check out them below if itf can help:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Method 2:

  Try these steps and check:

  a. Click Start, open Control Panel.

  b. click sounds, click the recording tab.

  c. click microphone, and then click Properties.

  d. under the controller information, check if the correct sound card is selected.

  e. click on the advance tab, under exclusive mode uncheck both boxes.

  f. click on apply, then ok.

  Check if it helps.

  Method 3:

  Try to update the latest drivers for the sound card and then check that if it helps, here is the link:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• G56-127nr, do not start, I can hear the motor, but I have a black screen

  I've tried the hard reset test, it did not work... my caps lock flashes also once every three or four seconds... Please help

  bumbleebee wrote:

  I've tried the hard reset test, it did not work... my caps lock flashes also once every three or four seconds... Please help

  According to the guide for your laptop computer, the processor is not functional.  It is most likely will have to be repaired, but before that, you can try reseating the RAM/hard.

  Follow the instructions for reinstalling the RAM here: http://support.hp.com/us-en/document/c01732674

• I can hear the sound but no pictures on some internet news sites.

  Hello everyone, I have a Windows 7 64 - bit laptop computer. I hear the sound but no pictures. Why is this? Thank you. Ldxrunner.

  Hello everyone, I have renstalled VLC 32 - bit version, as suggested by the VLC Forum. Thank you. Ldxrunner

• When you use windows media player, I can hear the sound but the picture is just a black square in a green square. How can I see the picture?

  Equipped with Vista

  Hello

   
  I suggest that you check if there are codecs appropriate to run the file.
  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions
   

• I can hear the sound but video while playing with Windows Media Player

  Original title: no video

  Hello

  Currently in Windows Media Player, VLC and GoPro Cineform when I play video I get sound, but no video.  Just a white screen.

  I tried a variety of formats, MP4, WMV, and AVI.  I even tried to play the video that I have seen and edited on this machine in the latest with no joy.  Windows is completely up to date.

  Running Windows 7 64 bit.
  8 GB RAM
  AMD 4400 M with Radeon graphics card A6

  Thank you guys

  Updated my drivers and the job done.  Thanks for the help.