I update my site DNS settings?

Similar Questions

• 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD site Web Microsoft Windows Update or connect to the Microsoft Update Web site

  • 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution for the error Code:

  0 x 80248011, 0x80072EE7, 0x8024402C, 0x8024502D, 0x800A0046, 0x800A01AD

   

  When you try to connect to the Microsoft website Windows Update or connect to the Microsoft Update Web site, you may receive one of the following error codes:

  • 0x800A0046
  • 0 x 80248011
  • 0x80072EE7
  • 0x8024402C
  • 0x8024502d
  • 0x800A01AD

  CAUSE The 0x800A0046 error code may occur if one of the following conditions is true:...

  • The 0x800A0046 error code may occur if one of the following conditions is true:
    • The logon user account belongs to the guests or limited account groups.
    • The security descriptor does not have authenticated users run Windows Update or Microsoft Update.
    • The impersonate a client after authentication policy is missing the account administrator and Service in the list of users and groups.
  • Error code 0 x 80248011 may occur when there is a problem with the database that stores Windows Update or Microsoft Update information on your computer.
  • The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or the Microsoft Update Web site. This error can occur if the Hosts file contains a static IP address.
  • The 0x8024402C or 0x8024502D error codes typically occur because there is an incorrect character in substitution of proxy settings.
  • The 0x800A01AD error code may occur if the c:\windows\system32\wuaueng.dll file is missing or is not registered correctly.

   

  RESOLUTION

  0x800A0046 error code to resolve this error, use one of the following methods: me...

  0x800A0046 error code

  To resolve this error, use one of the following methods:

  Method 1: Remove the user account that is experiencing difficulties for customers or account groups

  1. Click Start and run, type control admintools, and then click OK.
  2. Click on computer management.
  3. Expand local users and groups.
  4. Select users.
  5. Open the account used to access Windows Update or Microsoft Update.
  6. Click on the Member tab of.
  7. Select the user account you want to remove, and then click on remove.

  Method 2: Set the security descriptor

  1. Click Start, run, type cmd, and then click OK.
  2. Type sc tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL unit), and then press ENTER.

     You will receive a message of 'Success'

     Note the Sc.exe tool is not available in a default Windows 2000 installation. The Sc.exe tool is from the Microsoft Windows 2000 Server Resource Kit.

  3. Type Exit to close the command prompt.
  4. Try Windows Update or Microsoft Update again.

  Method 3: Add the Local Administrator and accounts Service him impersonate a client after authentication

  1. Click Start, click Run, type secpol.msc and press ENTER.
  2. Expand local policies.
  3. Click user rights assignment.
  4. Double-click to open the impersonate a client after authentication
  5. On the local security settings tab, click on add a user or group, and then add the administrator and the Service to the list of users and groups.
  6. Click OK and restart the computer.

  Method 4: Configure the remote procedure call (RPC) service to log on under a Local System account

  1. Click Start and run, type services.msc, and then click OK.
  2. Find and right-click the remote procedure call (RPC) service and then click Properties.
  3. On the connection tab, click Local System account, click on apply and then click OK.
   

  error code 0 x 80248011 before solve you this problem, clear the Microsoft Internet Explorer cache. To do this, follow these steps:

  1. In the Internet Explorer Tools menu, click Internet Options.
  2. On the general tab, click on delete files in the temporary Internet files section.
  3. Click OK, and then click OK again.

  To resolve this error, recreate the database that stores Windows Update or Microsoft Update information on your computer. To do this, follow these steps:

  1. Click Start, click Run type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following command and press ENTER: net stop wuauserv
  3. At the command prompt, type the following command and press ENTER: cd /d c:\Windows\SoftwareDistribution

     Where c:\Windows is the folder where Windows is installed.

  4. At the command prompt, type the following command with the quotation marks and press ENTER: rd /S /Q DataStore
  5. At the command prompt, type the following command and press ENTER: net start wuauserv.
  6. Close the command prompt window.
   

  0x80072EE7 error code to resolve this error, examine the Hosts file. (This file can also be hosts. Sam.) Make sure that the file lists all the entries IP static for the Windows Update Web site or the Microsoft Update Web site.

  The Hosts file is located in the C:\Windows\system32\drivers\etc folder. To view the Hosts file, you may need to associate the file with Notepad. To do this, follow these steps:

  1. Right-click the Hosts file.
  2. Click Open with, and then select Notepad from the list of programs.

  If the Hosts file contains a static IP address that is associated with Windows Update or Microsoft Update, comment the entry by adding the sign # at the beginning of the entry. You can also delete the whole line and save the changes to the Hosts file.

  Note programs, such as Web accelerators, accelerators DNS, utilities of caching DNS and Spyblockers, can add static IP entries for the Windows Update Web site or the Microsoft Update Web site to your Hosts file. This scenario can cause Windows Update or Microsoft Update to fail.

   

  error codes 0x8024402C or 0x8024502d to resolve these errors, remove the characters from the list of exceptions to the proxy, and then clear the proxy cache. To do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Connections tab, click LAN settings, and then advance.
  4. Delete any entry in the Exceptions section.
  5. Exit Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv

  0x800A01AD error code to resolve this error, use one of the following methods. Method 1: Register the MSXML program files to register the MSXML files, follow these steps.

  Note You may not have installed the files listed in steps 3 and 5 on your computer. If you don't have one of these files, when you try to save the file, you will receive an error message similar to the following error message:

  LoadLibrary (".dll") has failed - the specified file name could not be found.

  You can ignore this error message and continue to the next step.

  1. Click Start, click Run, type regsvr32 Msxml.dll in the Open box, and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml.dll successful.
  3. Click Start, click Run, type regsvr32 Msxml2.dll in the Open box, and then click OK.
  4. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml2.dll successful.
  5. Click Start, click Run, type regsvr32 Msxml3.dll in the Open box, and then click OK.
  6. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml3.dll successful.

  Method 2: Save the file c:\windows\system32\wuaueng.dll to save the c:\windows\system32\wuaueng.dll file, follow these steps:

  1. Click Start, click Run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• BEFSX41 1.52.16 ignores the DNS settings

  Hi all

  I think I have found quite a serious problem (for me) with the latest firmware BEFSX41 (v 1.52.16.4).

  All first Base: the router is connected directly to a cable modem and gets it's IP through DHCP. My ISP uses DNS servers who harvest unknown DNS names and redirects them to a server which offers suggested sites. The biggest problem is that it can return a public IP address when you are looking for a name for a server in my VPN and causes all my VPN traffic get routed to public IP addresses.

  The solution is to configure the router to use (sometimes provided by my ISP) DNS servers that do not have this behavior. This worked great by setting these servers on the settings page in the BEFSX v1.52.10.

  The problem occurred when I updated the firmware (hoping it would fix more problems than he solved) to version 1.52.16. The new version now does not take into account the configured DNS settings and always use the assigned DNS servers DHCP protocol.

  My question is therefore of two parts:

  1. Where can I find a (reliable) download of the 1.52.10 firmware, so I can get my VPN works again? Or is there a better version of firmware I should use that would have this problem fixed?
  2. What is the best way to ensure Linksys is aware of the issue, so that I can get fixed in the next update?

  Thank you!

  According to what features are most important to you, new firmware on the router is certainly not always better!

  Here is a place where to try for your BEFSX41:

  http://BEFSX41.flogator.org/doku.php?id=stock

  Anyone no matter what firmware for the BEFSR41 v4.3 that allows traffic logging feature to actually exit traffic data?

  See you soon!

• Why won't my router save the changes to 192.168.0.1 DNS settings? (DGN2200v4)

  I just bought a DGN2200v4 and successfully connected to the internet. However, it took me ages to figure out how to save the changes made to DNS settings. (I wanted to use "OpenDNS" on 208.67.222.222)

  It turns out that if I connect to the router through 192.168.0.1, I can not change the DNS settings. When I click "Apply" after entering the new numbering, it takes 30 seconds or more for the progress bar for complete, but no change is made. i.e. it does not save the changes I made.

  If instead I connect to the router via www.routerlogin.net, changes are correctly saved after clicking 'Apply', with the progress bar by taking 30 seconds or more.

  I tried several times with consistent results. Why 192.168.0.1 not working then as www.routerlogin.net don't? I thought they were equivalent - the webpage 'Netgear genius' is identical on both...

  JC

  JCA says:

  
  

  Also, do you recommend make a factory hard reset after the firmware update, or there at - there no need?

  Sorry for the late reply.

  Personally, I tend to reset factory and re - enter the settings manually, unless I've saved a backup of this same version of the firmware. However, I use Netgear as Access Points routers and so I have little data to re-enter. To some people will say that a factory reset is useless and very often they would be correct, but the effects of factory reset no when it may be necessary are often difficult to predict. I was moderator on these forums for a dozen years, and have seen hundreds of threads where the solution to the problems after an update of the firmware has been at the factory to reset the router.

• Update soundcards site says I need to install the ActiveX control, but there is no bar at the top click or any other option to download.

  Update soundcards site says I need to install the ActiveX control, but there is no bar at the top click or any other option to download.  How can I download this control so I can access the Windows Update Web site?

  See if that helps-

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• Try to use the Windows Update Web site

  I try to use the microsoft update Web site.  Whenever I try to start the update process I get a message asking me to please change your Internet Explorer security settings / persistence under Userdata, select Enable.

  When I check, the option is already set that way.  I am running Windows XP.  Can someone help me get the Microsoft update Web site to check that the setting is correct?

  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=3&ln=en&IsMu=false

  Description of the problem

  This error appears when you attempt to save advanced settings on the site to update with Internet Explorer Userdata persistence disabled.

  Applicable operating systems
  • Windows 2000
  • Windows XP
  • Windows Server 2003

  Resolutions

  1. make sure that the Local Administrator account and the Service are added to the security policy 'impersonate a client after authentication ". Click Start. Point to programs. Point to Administrative Tools. Choose local security policy. Expand local policies. Select the user rights assignment. Double-click to open the impersonate a client after authentication. On the local security setting tab, add the Service and the administrator of the list of users and groups. Click OK. Restart the system.

  2. enable the Userdata persistence in Internet Explorer Start Internet Explorer. On the Tools menu, click Internet Options. Select the Security tab. Select the Internet Web zone icon. To adjust the security level, click custom level. Under Miscellaneous enable the Userdata persistence. Opens the dialog box are you sure you want to change the security settings for this zone . Click Yes. Click OK. Try Windows Update again.

• WAG54G2 DNS settings

  Hi all

  I have a very weird.

  I have a WAG54G2 and I'm trying to update the DNS settings on the router. I put in the new details, they record without any problem. However when I disconnect/connect or reboot and check the status page they do not seem to be updated. However if I go back to the Setup page the new DNS settings are there.

  I had a good hunt on Google and forums but can't seem to find anything useful.

  Any ideas are appreciated.

  See you soon

  Steve

  If you then attempt to static DNS entry of the side LAN on the router configuration page, you won't be able to see it on the status page of the router as DNS is on the side of the LAN, not on the side of WAN.

• Windows 7 pro 64 hangs up on the installer is updated to display registry settings

  Windows 7 pro 64 hangs up on the installer is updated to display registry settings.  It will sit there for hours and doing nothing. Hard drive seems to click from time to time.  New drive in a new i7 system.

  If the problem persists, try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards

  Right-click your video card, click on uninstall.

  Restart your system

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards
  Right-click your video card

  Driver update software; then click search automatically for updated driver.

  Note: The drivers on the Windows Update site is directly provided by equipment manufacturers. Microsoft tests drivers in various environments prior to publication; However, we cannot guarantee that all the drivers work on all hardware platforms as there are too many different models, although their hardware IDS are the same as the standard version. In some cases, due to changes in the material by different manufacturers, updates of the driver can cause an error.

  If this does not work on your question, I suggest you install the Vista driver in compatibility mode. Remove and rescan the device in the device, right click on the executable/installer file manager driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.
  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Change the DNS settings in the Pool of IP network

  Hello

  Due to a migration of our DNS servers, I have to change the IP addresses of the DNS servers defined in the (currently used) our BDE server IP pools. There is a Hadoop cluster with a large amount of data running using this pool and I do not have to deploy the cluster again. Restart of the cluster is not matter, so I planned the settings DNS for the cluster nodes have to change after reboot. Unlikely, I could not change the DNS settings. Is there a way (perhaps non-elegant) change those settings for the pool?

  See you soon,.

  Dustin

  Hi Dustin,

  BDE provides the interface to change the DNS server in the network added to the BDE.  You must change the BDE database to do.  Here is the solution:

  1 Server BDE connect you as user serengeti

  2. run this command: echo ' network dns1 set update = 'the_new_dns_server_ip' where name = 'the_network_name '; \q" | psql

  3. apply the new DNS server. There are two approach. You can choose one.

  (a) connection BDE CLI and run "cluster stop - name...". ' and 'start cluster - name... '. "to restart the virtual machines in the cluster, then the new DNS server will be applied.

  (b) on BDE server, run "serengeti - ssh.sh cluster_name " sudo sed-i of | nameserver. * | nameserver the_new_dns_server_ip| ' g' / etc/etc/resolv.CONF. The new DNS server should take effect immediately.

  Thank you for using BDE.

  Jesse @BDE

• DNS settings for the intranet server is not not a DNS

  I have an OS X server that services the on the local subnet (behind a NAT).  We have moved to a new office and installed a new firewall / local DNS and all other machines can resolve names of local computer.  But the OS X Server solves only them to the machine gateway/firewall, rather than solve them for local machines.

  If I disable the server App DNS, resolved names.  But I seem to remember that I'm not supposed to do disable the OS X Server DNS, set it instead to forward requests to the gateway.  Unfortunately the Google Machine isn't helping me, because every sentence google I can think on OS X Server and DNS settings show how to use your OS X Server as a DNS server for the computers on your network - which is not what I want to do!

  Which, in my view, should run is listing the gateway as a forwarding server, then tell machine OS X to "Search for only some clients" and "The Server itself" selection in the dialog box "Edit Search Clients.  But it does not work.

  Any help appreciated, thanks.

  Two things you need to do:

  You must configure the host/domain name on the server and/or point the DNS address in the network preferences for 127.0.0.1

  Once you tell the server to perform searches in its own recursive cache/internet to 8.8.8.8 * or your dns public server here *, then it stops to pass requests to the gateway.

  Then set your DHCP server to serve IP addresses in DNS (10.0.0.5) servers to clients.

  Example:

  * Client DHCP address request *.
  10.0.0.10 - IP
  255.255.255.0 - mask
  10.0.0.1 - gateway
  10.0.0.5 - DNS

• 10 iOS came out today, but why isn't she displayed in my 'update software' in the settings. ?

  10 iOS update came out today, but it does not appear in my "update software" in the settings, what do I do? or how long will it take to show?

  That may depend on the country in which you reside.   As AFAIK, new OSs are generally released according to the marketing of policies in one country or another, not at the same time global. I can't detect what country you are.

• How can I renew my web site? I update my site to go to confirm the changes... but firefox does not allow me to see my updated site - no button renew? !!!

  How can I renew my web site? I update my site to go to confirm the changes... but firefox does not allow me to see my updated site - no button renew? !!! Firefox becomes slow!

  Reload Web pages, and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

  See also:

  • http://KB.mozillazine.org/Clearing_the_cache

• DNS query script - need a way to script to query the DNS settings of all the servers on a domain

  Hi - I was wondering if anyone new a script or a simple way to query the DNS settings of all the servers on a domain? Basically, I need to know the primary and secondary, all our servers DNS settings and that discharge into a file. Any help is very appreciated

  Thanks in advance

  Hello

  As you try to run the DNS settings on the domain, I suggest you to post the same question on the Microsoft TechNet Forums

  You can follow the link to your question:

  Windows Small Business Server: http://social.technet.microsoft.com/Forums/en/category/windowsserver/

  It will be useful.

• Error when trying to access the microsoft update web site

  I am using windows XP Pro. SP3 32-bit (build 2600.xpsp_sp3_gdr.100216 - 1514)

  I have IE v8.0.6001.18702

  When I access the microsoft update web site, I get a message saying that I need to update windows update and I want that allows. No matter what I said or after 30 seconds have elapsed if I do nohting I get the message:

  • The instruction at "0 x 08100068" referenced memoery to '0 x 08100068', the memoery could not be "written".

  The address is different from one attempt to another, but both are still the same as eachother.

  When I close this tab IE grave message box down and I get the message 'recovered tab' normal.

  Can I search / install updates using vbscript widely available, or automatic update installation of windows. The problem only occurs when you try to access the web site itself.

  I tried to download and install the latest windows update manually, but this does not solve the problem.

  I am unaware of the date of the last update because I'm unable to access the update log.

  I use a current version of McAfee Anti-virus.

  I think my windows is a clean install, but I didn't do it, so I can't be 100% certain.

  Jacob

  I uninstalled ie8 and found ie7 under him.

  I am able to access the site WindowsUpdate using ie7.

  Jacob

• Update problems, I just reinstalled XP pro and I can't get the updates from the windows update web site

  I just reinstalled XP pro and I can't get the updates from the windows update web site. Whats up with this please help

  There is no way that anyone might be able to help without more. My initial guess and it is just a guess, is that you have to update Internet Explorer .v8. Click HERE and download IE8 and install it. Try again updates once the installation is complete.