BEFSX41 1.52.16 ignores the DNS settings

Similar Questions

• DNS query script - need a way to script to query the DNS settings of all the servers on a domain

  Hi - I was wondering if anyone new a script or a simple way to query the DNS settings of all the servers on a domain? Basically, I need to know the primary and secondary, all our servers DNS settings and that discharge into a file. Any help is very appreciated

  Thanks in advance

  Hello

  As you try to run the DNS settings on the domain, I suggest you to post the same question on the Microsoft TechNet Forums

  You can follow the link to your question:

  Windows Small Business Server: http://social.technet.microsoft.com/Forums/en/category/windowsserver/

  It will be useful.

• My hotmail account has certainly was hacked and used to change the DNS settings on a vauable domain name registration.

  My hotmail account has certainly was hacked and used to change the DNS settings on a vauable domain name registration. Indeed, they stole the domain name, which used my hotmail account as account checking the change of domain name registration. It is a police matter. How can I get the security of Hotmail team to freeze the mail in the account and then return the account for me? I am the owner of long-standing account, since 1995. What should I do to prove that I am the rightful owner of the account?

  How can I contact Hotmail security ASAP?

  Hi JoePiecora,

  Thanks for posting your question in the Microsoft answers Forum. For any question on Hotmail, please visit the following link:

  http://windowslivehelp.com/forums.aspx?ProductID=1

• How can I get to the screen to insert the DNS settings? Printer continues to fall from the network

  Windows 7

  Photosmart 6520

  How can I get to the screen to insert the DNS settings? Wireless network printer continues to fall.

  The screen to manually set the DNS and IP parameters is in the SAP, or shipped to the printer Web server.  To access this page, it will take the IP address of the printer.  This information is found by pressing the icon on the front of the Photosmart 6520 wireless.

  Once again, we have the IP address, and then they could type this information in the address bar of their favorite browser.

  On another thread, you have mentioned the difficulties getting to the Web integrated printer server.  It is possible that the printer has a valid IP address, but still has no "communication" with the router.  Have you tried to enter the menu of the 6520 wireless and default network selection.  After having done that, then we can re - run the Wireless Setup Wizard in the wireless menu to reconnect the printer to the network.

  With this new valid IP address, you can access SAP of the printer?  In addition, make sure that the printer and the PC are connected to the same network access point.  Let me know how it goes.

• Dial-up connections do not reset the DNS settings.

  Logins V6.11 on Windows 7.

  When I switch to my working AC connection profile does not change the DNS settings.

  For the profile of my house, I specify a specific DNS SERVER to use in the "Override default DNS and TCP/IP" settings.

  For my work in the settings 'Override TCP/IP and DNS default' profile, I said to the "Obtain DNS server address automatically."

  However, when I go home profile to work profile, it maintains specific DNS servers (from the host profile) in the TCP/IP settings, and I need to go and change the TCP/IP DNS settings manually.

  My job profile is marked as available for automatic location switching profile and the profile of home is defined as my favorite WLAN profile.

  No idea why AC cannot apply the "Obtain DNS server address automatically" setting when it switches to the job profile?

  Thank you.

  Argh!... Solution:

  Create a profile and set it to "Use the following DNS server address" but leave the list empty DNS server address.

  Safe profile, be happy!

  Don't ask me if you change the new profile and find the radio button to "Obtain DNS server address automatically". There is work if you go this way.

  Thanks lenovo for the loss of time :/

• Change the DNS settings in the Pool of IP network

  Hello

  Due to a migration of our DNS servers, I have to change the IP addresses of the DNS servers defined in the (currently used) our BDE server IP pools. There is a Hadoop cluster with a large amount of data running using this pool and I do not have to deploy the cluster again. Restart of the cluster is not matter, so I planned the settings DNS for the cluster nodes have to change after reboot. Unlikely, I could not change the DNS settings. Is there a way (perhaps non-elegant) change those settings for the pool?

  See you soon,.

  Dustin

  Hi Dustin,

  BDE provides the interface to change the DNS server in the network added to the BDE.  You must change the BDE database to do.  Here is the solution:

  1 Server BDE connect you as user serengeti

  2. run this command: echo ' network dns1 set update = 'the_new_dns_server_ip' where name = 'the_network_name '; \q" | psql

  3. apply the new DNS server. There are two approach. You can choose one.

  (a) connection BDE CLI and run "cluster stop - name...". ' and 'start cluster - name... '. "to restart the virtual machines in the cluster, then the new DNS server will be applied.

  (b) on BDE server, run "serengeti - ssh.sh cluster_name " sudo sed-i of | nameserver. * | nameserver the_new_dns_server_ip| ' g' / etc/etc/resolv.CONF. The new DNS server should take effect immediately.

  Thank you for using BDE.

  Jesse @BDE

• ignore the global settings of advice

  Hi all

  I know that I can put "ignore the advice" for the current session.

  Is it possible to put it globally for all sessions?

  ALTER session set '_optimizer_ignore_hints' = TRUE;

  works for me, at the level of the session or the instance:

  orclz > alter system set '_optimizer_ignore_hints' = false;

  Modified system.

  orclz > select / * + full (emp) * / * from emp where empno = 1000;

  no selected line

  Execution plan

  ----------------------------------------------------------

  Hash value of plan: 3956160932

  --------------------------------------------------------------------------

  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |

  --------------------------------------------------------------------------

  |   0 | SELECT STATEMENT |      |     1.    38.     3 (0) | 00:00:01 |

  |*  1 |  TABLE ACCESS FULL | EMP |     1.    38.     3 (0) | 00:00:01 |

  --------------------------------------------------------------------------

  Information of predicates (identified by the operation identity card):

  ---------------------------------------------------

  1 - filter ("EMPNO" = 1000)

  orclz > alter system set '_optimizer_ignore_hints' = TRUE;

  Modified system.

  orclz > select * from emp where empno = 1000;

  no selected line

  Execution plan

  ----------------------------------------------------------

  Hash value of plan: 2949544139

  --------------------------------------------------------------------------------------

  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |

  --------------------------------------------------------------------------------------

  |   0 | SELECT STATEMENT |        |     1.    38.     1 (0) | 00:00:01 |

  |   1.  TABLE ACCESS BY INDEX ROWID | EMP |     1.    38.     1 (0) | 00:00:01 |

  |*  2 |   INDEX UNIQUE SCAN | PK_EMP |     1.       |     0 (0) | 00:00:01 |

  --------------------------------------------------------------------------------------

  Information of predicates (identified by the operation identity card):

  ---------------------------------------------------

  2 - access ("EMPNO" = 1000)

  orclz > select / * + full (emp) * / * from emp where empno = 1000;

  no selected line

  Execution plan

  ----------------------------------------------------------

  Hash value of plan: 2949544139

  --------------------------------------------------------------------------------------

  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |

  --------------------------------------------------------------------------------------

  |   0 | SELECT STATEMENT |        |     1.    38.     1 (0) | 00:00:01 |

  |   1.  TABLE ACCESS BY INDEX ROWID | EMP |     1.    38.     1 (0) | 00:00:01 |

  |*  2 |   INDEX UNIQUE SCAN | PK_EMP |     1.       |     0 (0) | 00:00:01 |

  --------------------------------------------------------------------------------------

  Information of predicates (identified by the operation identity card):

  ---------------------------------------------------

  2 - access ("EMPNO" = 1000)

  orclz >

  orclz >

  Post edited by: JohnWatson

  Update: corrected the police.

• Why won't my router save the changes to 192.168.0.1 DNS settings? (DGN2200v4)

  I just bought a DGN2200v4 and successfully connected to the internet. However, it took me ages to figure out how to save the changes made to DNS settings. (I wanted to use "OpenDNS" on 208.67.222.222)

  It turns out that if I connect to the router through 192.168.0.1, I can not change the DNS settings. When I click "Apply" after entering the new numbering, it takes 30 seconds or more for the progress bar for complete, but no change is made. i.e. it does not save the changes I made.

  If instead I connect to the router via www.routerlogin.net, changes are correctly saved after clicking 'Apply', with the progress bar by taking 30 seconds or more.

  I tried several times with consistent results. Why 192.168.0.1 not working then as www.routerlogin.net don't? I thought they were equivalent - the webpage 'Netgear genius' is identical on both...

  JC

  JCA says:

  
  

  Also, do you recommend make a factory hard reset after the firmware update, or there at - there no need?

  Sorry for the late reply.

  Personally, I tend to reset factory and re - enter the settings manually, unless I've saved a backup of this same version of the firmware. However, I use Netgear as Access Points routers and so I have little data to re-enter. To some people will say that a factory reset is useless and very often they would be correct, but the effects of factory reset no when it may be necessary are often difficult to predict. I was moderator on these forums for a dozen years, and have seen hundreds of threads where the solution to the problems after an update of the firmware has been at the factory to reset the router.

• Lose the client computer's DNS settings

  I have several PC under Windows 7 on a SBS 2011 domain. We statically defined DNS settings on all of the client computer. The DNS settings are somehow have cleared away somehow. Essentially, the secondary DNS server is depolluted. The main DNS server, which is the domain controller, remains intact. Event logs do not have me all good on that. Any input on where I should start looking for would be greatly appreciated.

  Kind regards
  Steve

  Hello

  I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  They will be able to guide you to the best.

• Why the proxy settings are not respected

  I set up SSH as a proxy server on my laptop when I'm on a public network and configure Firefox to use the proxy by completing the manual Proxy config.

  If SSH doesn't work, I get this error message as expected: "the proxy server refuses connections" when I try to access any website EXCEPT Google.

  Searches on Google and access Google.com still works, even when the proxy server is not up. That seems broken.

  When the proxy server IS up, Google searches do not appear to use it.

  Google is my default search provider. If I try to access Bing, Firefox is behaving as expected (no access when proxy is out, throw up debugging indicating new connections when the proxy is up). If I change from Bing to be default search provider, the behavior of the two remains the same (proxy will use Bing, Google does not work).

  Why access to Google (and only Google?) ignore the proxy settings? Are there other sites of 'magic' that would also ignore the proxy? I use the proxy because I want to protect my internet traffic when I'm on public networks, if Firefox can randomly ignore them for some sites but not others, how can I trust him?

  My configuration problem. I realized that any site that uses https worked, while others are not.

  Somehow the "use this proxy server for all protocols" got unchecked. Audit, it solves the problem.

• WAG54G2 DNS settings

  Hi all

  I have a very weird.

  I have a WAG54G2 and I'm trying to update the DNS settings on the router. I put in the new details, they record without any problem. However when I disconnect/connect or reboot and check the status page they do not seem to be updated. However if I go back to the Setup page the new DNS settings are there.

  I had a good hunt on Google and forums but can't seem to find anything useful.

  Any ideas are appreciated.

  See you soon

  Steve

  If you then attempt to static DNS entry of the side LAN on the router configuration page, you won't be able to see it on the status page of the router as DNS is on the side of the LAN, not on the side of WAN.

• How to connect without changing the DNS on the Client Windows 7 computer to the 2008 R2 domain controller?

  I have a Windows Server 2008 R2 Enterprise domain controller configuration and some Windows 7 computers. I use this for a home network for safety because we rent a part of the property and still have guests. The part being rented has 2 portable Windows 7 Professional that guests can use.

  I want to connect all computers to the domain controller without changing the DNS settings on them. How to get to do and please put detailed instructions?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Unable to connect with the DNS server

  Recently, I went away for the weekend and came back to find that I had no internet, on all devices... So I don't know exactly how long he was out. I'm a computer and a network engineering student and I've tried everything I can think of to make it work again. Here's what I did:

  First off troubleshooting generates an error message: "failed to connect to the DNS server.

  Of course, I did reboot of the habit of my router and my devices.

  I can't connect to WiFi or direct connection via Ethernet. I tried flushing DNS via the command-line ("ipconfig/flushdns") as well as the command "netsh int ip reset", "ipconfig/release" and "ipconfig / renew." I tried to go into the settings of the network adapter and the two affecting the IPv4 and IPv6 DNS google DNS settings. I even traded my router for a new with my ISP (of Roger (Canada)). I have connected to my router through my web browser and tried to change some of the DNS settings there (everything went well). Nothing worked so I have everything set to default. I tried ping around my own network, I ping my own card NETWORK, but also the entry door, so I know that's not my PC, I have also excluded because all my devices do not work. I spoke with Rogers (my ISP) twice now and they were no help at all, they were more concerned by the flashing lights on the router as the real problem. I'll have a technician to the course to watch tomorrow, but I doubt they'll be any help at all. I wouldn't say I'm a computer genius, but I have a pretty good understanding of how things work and I can not understand what the problem is here, I can have forgotten something or forgot to mention something I tried. But if anyone has any ideas, or similar cases they decided that I would be VERY grateful for the help.

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  There could be various reasons for which you will not be able to connect to the Internet. And I'm glad to know you have try more troubleshooting steps to solve problems.

  1. which antivirus program is installed on your computer?
  2. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link and see if that helps.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the update after trying the steps above.

• BEFSX41 router will not let me delete the DNS entries

  I'm trying to set up a BEFSX41 router that lies behind a cable modem Motorola SB 5120.
  Somehow it now shows the DNS entries in the basic configuration page. Comcast advises me to zero all these entries. When I make the attempt, a message appears saying the entry is not valid, and when I close the entrance warning comes back. The router is configured to obtain its IP address automatically of the SB 5120. This could be the cause of this behavior?

  I suggest that reset you your router and reconfigure all your router settings from scratch, reset your router should solve your problem.

  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

• DNS settings for the intranet server is not not a DNS

  I have an OS X server that services the on the local subnet (behind a NAT).  We have moved to a new office and installed a new firewall / local DNS and all other machines can resolve names of local computer.  But the OS X Server solves only them to the machine gateway/firewall, rather than solve them for local machines.

  If I disable the server App DNS, resolved names.  But I seem to remember that I'm not supposed to do disable the OS X Server DNS, set it instead to forward requests to the gateway.  Unfortunately the Google Machine isn't helping me, because every sentence google I can think on OS X Server and DNS settings show how to use your OS X Server as a DNS server for the computers on your network - which is not what I want to do!

  Which, in my view, should run is listing the gateway as a forwarding server, then tell machine OS X to "Search for only some clients" and "The Server itself" selection in the dialog box "Edit Search Clients.  But it does not work.

  Any help appreciated, thanks.

  Two things you need to do:

  You must configure the host/domain name on the server and/or point the DNS address in the network preferences for 127.0.0.1

  Once you tell the server to perform searches in its own recursive cache/internet to 8.8.8.8 * or your dns public server here *, then it stops to pass requests to the gateway.

  Then set your DHCP server to serve IP addresses in DNS (10.0.0.5) servers to clients.

  Example:

  * Client DHCP address request *.
  10.0.0.10 - IP
  255.255.255.0 - mask
  10.0.0.1 - gateway
  10.0.0.5 - DNS