WAG54G2 DNS settings

Similar Questions

• DNS settings for the intranet server is not not a DNS

  I have an OS X server that services the on the local subnet (behind a NAT).  We have moved to a new office and installed a new firewall / local DNS and all other machines can resolve names of local computer.  But the OS X Server solves only them to the machine gateway/firewall, rather than solve them for local machines.

  If I disable the server App DNS, resolved names.  But I seem to remember that I'm not supposed to do disable the OS X Server DNS, set it instead to forward requests to the gateway.  Unfortunately the Google Machine isn't helping me, because every sentence google I can think on OS X Server and DNS settings show how to use your OS X Server as a DNS server for the computers on your network - which is not what I want to do!

  Which, in my view, should run is listing the gateway as a forwarding server, then tell machine OS X to "Search for only some clients" and "The Server itself" selection in the dialog box "Edit Search Clients.  But it does not work.

  Any help appreciated, thanks.

  Two things you need to do:

  You must configure the host/domain name on the server and/or point the DNS address in the network preferences for 127.0.0.1

  Once you tell the server to perform searches in its own recursive cache/internet to 8.8.8.8 * or your dns public server here *, then it stops to pass requests to the gateway.

  Then set your DHCP server to serve IP addresses in DNS (10.0.0.5) servers to clients.

  Example:

  * Client DHCP address request *.
  10.0.0.10 - IP
  255.255.255.0 - mask
  10.0.0.1 - gateway
  10.0.0.5 - DNS

• Why won't my router save the changes to 192.168.0.1 DNS settings? (DGN2200v4)

  I just bought a DGN2200v4 and successfully connected to the internet. However, it took me ages to figure out how to save the changes made to DNS settings. (I wanted to use "OpenDNS" on 208.67.222.222)

  It turns out that if I connect to the router through 192.168.0.1, I can not change the DNS settings. When I click "Apply" after entering the new numbering, it takes 30 seconds or more for the progress bar for complete, but no change is made. i.e. it does not save the changes I made.

  If instead I connect to the router via www.routerlogin.net, changes are correctly saved after clicking 'Apply', with the progress bar by taking 30 seconds or more.

  I tried several times with consistent results. Why 192.168.0.1 not working then as www.routerlogin.net don't? I thought they were equivalent - the webpage 'Netgear genius' is identical on both...

  JC

  JCA says:

  
  

  Also, do you recommend make a factory hard reset after the firmware update, or there at - there no need?

  Sorry for the late reply.

  Personally, I tend to reset factory and re - enter the settings manually, unless I've saved a backup of this same version of the firmware. However, I use Netgear as Access Points routers and so I have little data to re-enter. To some people will say that a factory reset is useless and very often they would be correct, but the effects of factory reset no when it may be necessary are often difficult to predict. I was moderator on these forums for a dozen years, and have seen hundreds of threads where the solution to the problems after an update of the firmware has been at the factory to reset the router.

• DNS query script - need a way to script to query the DNS settings of all the servers on a domain

  Hi - I was wondering if anyone new a script or a simple way to query the DNS settings of all the servers on a domain? Basically, I need to know the primary and secondary, all our servers DNS settings and that discharge into a file. Any help is very appreciated

  Thanks in advance

  Hello

  As you try to run the DNS settings on the domain, I suggest you to post the same question on the Microsoft TechNet Forums

  You can follow the link to your question:

  Windows Small Business Server: http://social.technet.microsoft.com/Forums/en/category/windowsserver/

  It will be useful.

• My hotmail account has certainly was hacked and used to change the DNS settings on a vauable domain name registration.

  My hotmail account has certainly was hacked and used to change the DNS settings on a vauable domain name registration. Indeed, they stole the domain name, which used my hotmail account as account checking the change of domain name registration. It is a police matter. How can I get the security of Hotmail team to freeze the mail in the account and then return the account for me? I am the owner of long-standing account, since 1995. What should I do to prove that I am the rightful owner of the account?

  How can I contact Hotmail security ASAP?

  Hi JoePiecora,

  Thanks for posting your question in the Microsoft answers Forum. For any question on Hotmail, please visit the following link:

  http://windowslivehelp.com/forums.aspx?ProductID=1

• How can I get to the screen to insert the DNS settings? Printer continues to fall from the network

  Windows 7

  Photosmart 6520

  How can I get to the screen to insert the DNS settings? Wireless network printer continues to fall.

  The screen to manually set the DNS and IP parameters is in the SAP, or shipped to the printer Web server.  To access this page, it will take the IP address of the printer.  This information is found by pressing the icon on the front of the Photosmart 6520 wireless.

  Once again, we have the IP address, and then they could type this information in the address bar of their favorite browser.

  On another thread, you have mentioned the difficulties getting to the Web integrated printer server.  It is possible that the printer has a valid IP address, but still has no "communication" with the router.  Have you tried to enter the menu of the 6520 wireless and default network selection.  After having done that, then we can re - run the Wireless Setup Wizard in the wireless menu to reconnect the printer to the network.

  With this new valid IP address, you can access SAP of the printer?  In addition, make sure that the printer and the PC are connected to the same network access point.  Let me know how it goes.

• WARNING: Your DNS settings have been changed. Accept changes or restore the original settings?

  WARNING: Your DNS settings have been changed.  Accept changes or restore the original settings?

  This is the error message that appears every 3 minutes.  If I click on accept and then I can't get back on the internet unless I reboot.  If I accept the restoration, so I'm OK for the other 3 minutes.  Why is that happening and how can I solve the problem?  (The computer has always been setup for obtain an IP and DNS address automatically.  I have checked the properties and that has not changed).

  Try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• BEFSX41 1.52.16 ignores the DNS settings

  Hi all

  I think I have found quite a serious problem (for me) with the latest firmware BEFSX41 (v 1.52.16.4).

  All first Base: the router is connected directly to a cable modem and gets it's IP through DHCP. My ISP uses DNS servers who harvest unknown DNS names and redirects them to a server which offers suggested sites. The biggest problem is that it can return a public IP address when you are looking for a name for a server in my VPN and causes all my VPN traffic get routed to public IP addresses.

  The solution is to configure the router to use (sometimes provided by my ISP) DNS servers that do not have this behavior. This worked great by setting these servers on the settings page in the BEFSX v1.52.10.

  The problem occurred when I updated the firmware (hoping it would fix more problems than he solved) to version 1.52.16. The new version now does not take into account the configured DNS settings and always use the assigned DNS servers DHCP protocol.

  My question is therefore of two parts:

  1. Where can I find a (reliable) download of the 1.52.10 firmware, so I can get my VPN works again? Or is there a better version of firmware I should use that would have this problem fixed?
  2. What is the best way to ensure Linksys is aware of the issue, so that I can get fixed in the next update?

  Thank you!

  According to what features are most important to you, new firmware on the router is certainly not always better!

  Here is a place where to try for your BEFSX41:

  http://BEFSX41.flogator.org/doku.php?id=stock

  Anyone no matter what firmware for the BEFSR41 v4.3 that allows traffic logging feature to actually exit traffic data?

  See you soon!

• Your DNS settings have been changed. Accept changes or restore the original settings?

  After you have installed Spyhunter, I get this message every time I start up. If I don't "accept", I lose the internet connection. Is this just a nuisance, or some malicious software work?

  Hello

  Please refer to the suggestions of Vidyaranjan A V responded on 18 January 2012

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/your-DNS-settings-have-been-modifed-accept-changes/378654ca-f754-4425-b1af-152213df710d

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If you still have questions, I would have you uninstall Spyhunter and check if the problem persists.

  Uninstall or change a program
  http://Windows.Microsoft.com/en-CA/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Lose the client computer's DNS settings

  I have several PC under Windows 7 on a SBS 2011 domain. We statically defined DNS settings on all of the client computer. The DNS settings are somehow have cleared away somehow. Essentially, the secondary DNS server is depolluted. The main DNS server, which is the domain controller, remains intact. Event logs do not have me all good on that. Any input on where I should start looking for would be greatly appreciated.

  Kind regards
  Steve

  Hello

  I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  They will be able to guide you to the best.

• Dial-up connections do not reset the DNS settings.

  Logins V6.11 on Windows 7.

  When I switch to my working AC connection profile does not change the DNS settings.

  For the profile of my house, I specify a specific DNS SERVER to use in the "Override default DNS and TCP/IP" settings.

  For my work in the settings 'Override TCP/IP and DNS default' profile, I said to the "Obtain DNS server address automatically."

  However, when I go home profile to work profile, it maintains specific DNS servers (from the host profile) in the TCP/IP settings, and I need to go and change the TCP/IP DNS settings manually.

  My job profile is marked as available for automatic location switching profile and the profile of home is defined as my favorite WLAN profile.

  No idea why AC cannot apply the "Obtain DNS server address automatically" setting when it switches to the job profile?

  Thank you.

  Argh!... Solution:

  Create a profile and set it to "Use the following DNS server address" but leave the list empty DNS server address.

  Safe profile, be happy!

  Don't ask me if you change the new profile and find the radio button to "Obtain DNS server address automatically". There is work if you go this way.

  Thanks lenovo for the loss of time :/

• Change the DNS settings in the Pool of IP network

  Hello

  Due to a migration of our DNS servers, I have to change the IP addresses of the DNS servers defined in the (currently used) our BDE server IP pools. There is a Hadoop cluster with a large amount of data running using this pool and I do not have to deploy the cluster again. Restart of the cluster is not matter, so I planned the settings DNS for the cluster nodes have to change after reboot. Unlikely, I could not change the DNS settings. Is there a way (perhaps non-elegant) change those settings for the pool?

  See you soon,.

  Dustin

  Hi Dustin,

  BDE provides the interface to change the DNS server in the network added to the BDE.  You must change the BDE database to do.  Here is the solution:

  1 Server BDE connect you as user serengeti

  2. run this command: echo ' network dns1 set update = 'the_new_dns_server_ip' where name = 'the_network_name '; \q" | psql

  3. apply the new DNS server. There are two approach. You can choose one.

  (a) connection BDE CLI and run "cluster stop - name...". ' and 'start cluster - name... '. "to restart the virtual machines in the cluster, then the new DNS server will be applied.

  (b) on BDE server, run "serengeti - ssh.sh cluster_name " sudo sed-i of | nameserver. * | nameserver the_new_dns_server_ip| ' g' / etc/etc/resolv.CONF. The new DNS server should take effect immediately.

  Thank you for using BDE.

  Jesse @BDE

• Domain Services Active Directory could not create the ntds object due to dns settings look for failure on the specific domain controller

  Forest consist of 1 DC server 2003 with all fsmo and 2000 1 domain controller roles.

  Completed all questions of adprep and when I tried to promote server 2008 standard edition to a domain controller, had the error message stating that Active Directory could not create the NTDS settings for the domain active directory CN = NTDS controller

  Settings, cn is 2k8dc1, cn = servers, cn = Default First Site Name, c is Sites, cn = Configuration, dc is Marie-France, dc = com on the ad distance dc server2.amanua.com.

  To ensure that the provided network credentials have sufficient permissions

  "The DSA operation unable to act because of the failure of the dns lookup"

  The idea was to demote the 2000 machine when I completed the installation of 2008.

  Hello

  You can display the query in the link provided to improve assistance:
  http://social.technet.Microsoft.com/forums/en/categories/

• I update my site DNS settings?

  Hello

  I get emails from Adobe on migration Date European and the obligation to update the DNS of my site settings.

  When I connect to my site admin and go to the window of SIte Domain, the DNS column indicates "the Service."

  This means no reconfiguration will be managed by Adobe BC?

  Thank you

  Hello

  Since you already have a new DNS delegation on BC There is no action required on your side for this area.

  Confirmation of DNS: http://www.dnswatch.info/dns/dnslookup?la=en&host=katrinapitts.com&type=NS&submit=Resolve

  Only customers who are external DNS hosting will have to up their IP A-records for their site.

  Hope this helps to clarify,

  -Sidney

• Publication of site Web and DNS settings

  We have two servers of domain controller and Web server. DNS is installed on the domain controller and IIS is installed and configured on the Web server. CNAME records for the site Web was created in DNS hosted on the domain controller and the site is hoted Web server. After that all configurations have been made in an appropriate way the site still isn't accessible. Help, please.

  Hey MuhammadDutse,

  For assistance with managing IIS and server, please join experts in the community, following the link:
  -IIS IIS7 - general