I use Business Catalyst to use the built-in forms?

Similar Questions

• How to activate and use the built-in webcam

  built in webcam

  How to activate and use the built in webcam on my desktop Dell Inspiron 1?

  MikeViklund,

  Try to read...

  Use and troubleshooting of the Webcam Dell and Dell Webcam Central Software

  Rick

• For 2 years, I used the built in camera 1.3, suddenly out of dissappeared and when I click it it says is not installed.

  For 2 years, I used the built in camera 1.3, somehow suddenly dissappeared and when I click on says it is not installed, I don't want to go into a repair shop because they charge you too much money. Please help, thanks. my pc is windows 7.

  Original title: built in webcam 1.3

  Hi, Nancy,.

  Control Panel > add a device

  Windows will search for devices connected to your system, but not installed. Click on the name of the webcam which shows in the search box and then click "next".

  Choose whether you want Windows to search for the device driver webcam using Windows Update on the Internet, or if you prefer research of Device Manager to the driver using a disc provided by the manufacturer of your laptop. Most of the drivers are on the system recovery disk included with your laptop, if you choose to add the driver from the disk. Check the box of your choice, then click on "next >" to continue.

  Wait while Windows searches from the driver using Windows Update, if that is your choice. There's an active Internet connection for Windows to do successfully. Allow the computer to install the driver and then restart the system for the webcam to be recognized by the system.

  Otherwise, you can use the system recovery disk or a driver downloaded directly from the manufacturer of your laptop to install the driver without using search Windows Update.

  Open the CD/DVD-ROM drive and insert the disc of recovery system or place the driver downloaded from the manufacturer in a directory of files easily accessible on your PC, or on the desktop, or in your 'My Documents' folder.

  Choose the option 'install the software automatically (recommended)' into the application 'Add a device', then press on "Next >" to start looking for your webcam driver. The Hardware Wizard will search the system recovery disk and automatically installs the driver. Press 'Finish' to close the wizard, and then restart the computer to allow the recognition of the webcam. Choose the option "Install the software manually" in order to access the location of the driver where you saved the driver and install it from there. Use the open file manager and search for the driver. Click on the ' next > ' button to install the driver, and then restart the computer to add webcam functionality. -ehow.com

  Built in webcam not working not not in Windows 7

• Using the built-in menu to create a context menu

  I would use the built-in Muse menus to create a menu button when you click displays a menu in a different location on the page. Is this possible?

  Yes. Use a widget (widget ToolTip) composition with completely a trigger/target and place a menu widget (or other elements orovided with links) in the target box.

• Calling servlet using the tag < satellite: form >

  Hi all

  There was a useful discussion earlier, on how to use the tag < satellite: form >. Reference:How to add a Submit button for a model without type to freshen up

  Now, my query is, How to use the tag < satellite: form > when the target is a Servlet?

  -BSR

  Hi SSB,

  Are using your 11.1.1.6.1 version? If Yes, then you need to add the name of your servlet in 'excludeURL' list of comments ReqAuthConfig.xml or 'Authentication filter application' in the Web.XML as this filter request you send. This is a new filter, they added in this version.

  I hope this helps.

  Kind regards

  Nelash Jindal

• Urgent: How to navigate through records using the ReadOnly ADF form

  Hi guru,.
  
  I'm new to ADF.
  I have a requirement where I need to display the records 'ADF read only form' where my query retrieve multiple records, now I want to browse all the record as we do in the table of the ADF. How can I achieve this using the Readonly ADF form.
  
  Please suggest me emergency.
  
  Thank you
  SPC

  You can also drag and drop on Next, Previous, first, last from the data control panel like buttons (it comes under the node for the data collection operations),
  A lot of this is covered in the book that I wrote to help people to start learning oracle ADF and Jdeveloper

  http://www.mhprofessional.com/product.php?ISBN=0071744282

• using the grid to form 10 g or 11 g

  Hello
  
  any body can help me to know how use the grid in form 10 or 11 g?

  Perhaps this Java Bean

  François

• VI Analyzer in an application using the built

  I have an application which is designed for a continuous integration server.  This application uses the VI Analyzer API (Labview 2009 for the moment) to run a series of tests on a case of the screws.  The problem is that when the program is run like VI all is happy, that the folder is added using the 'Add VIAn Item.vi' and the task runs on the four VI in the folder.  But when the VI is built and comes as an exe file, 'VIAn Add Item.vi' appears to add the folder but no vi is analyzed and if a specific VI is given then error 53 is thrown by "NI_FileType.lvlib:Get leader Type.vi.  Is it just a case of not being able to use the VI Analyzer API in a built application that is running as an exe?  I have attached the front panel of the application built after he was executed and the rear panel of the source code in question; There is more that the rest is just to determine the paths to analyze.

  The VI Analyzer API is not supported in a built EXE.

• Edge 40-how set up and use the built-in Wecam? It is not listed in Device Manager.

  We just bought this new advantage 40 with the built-in webcam, but it does not appear in our Device Manager, or find how to use it or put up in assistance with this.

  How can we put in place and use it?

  Thank you

  Found the problem. The software has never been installed.

  I downloaded the software from yawcam and the camera has come magically to life.

• Not able to use the built-in webcam

  I have a HP Pavilion dv6t - 6 c 00. I've upgraded to windows 7 ultimate which I had windows 7 Home premium that I could use the webcam, but now it displays an error when I open cyberlink youcam "warning, no webcam detected. Try connecting a webcam on your computer now. If you are using a built-in camera, make sure it is turned on." I looked and tried all the steps except the final step that the cyberlink youcam software does not allow me to click on the configuration settings. What should I do to activate my webcam?

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• How / can I use the built in camera on Asus laptop to take pictures?

  I don't know if you can answer this question, but I will ask the case. I have an Asus laptop running windows 7. I noticced theres a webcam above the screen, but I can't find a way to activate it in order to download and send photos. I searched for at least a few hours which made me curious of if the Asus laptop can even take pictures, or if the unit is only for VideoChat?

  To use the web cam, you have 2 options.

  option 1

  * Go to www.picanom.com

  * Click on allow if a box appears

  * Click on the snap

  Review of the photos that you took and click on save or print in the upper left corner of the image.

  * After clicking on save, click Download.  She will appear next to the "print" key.

  Option 2

  You must have the software to use the webcam.  I searched in google and foundhttp://www.yawcam.com/download.php as the best free software.

  Also, I found this one if you do not want to install a program.  You just download this, but you don't have to install it.  It would have been my choice #1, but it appears that half of my webcam, as something was covering the other half.  It took good pictures, but with a built-in cam, it sucks because actually you have to be sitting on the side to be centered.  You can try it on your PC, it can run different.  I have a Mac Book Pro with boot camp installed running under windows 7.  This is maybe why it did not work for me http://www.softpedia.com/get/Internet/WebCam/Rebellious-Productions-CamSnap.shtml

• Inability to make a selection of the screen using the built-in browser

  Hi all.

  Java newbie here - coding experience is VB.

  I'm trying to code using the JDE Eclipse against Sun JDK 6 for a Curve 8900 platform, V4.6.1.250, 4.2.0.113.

  I have a dirt simple browser application that accesses a single Web page. Exit the screen of the page is formatted for PDAS and other portable devices.

  The images on the site looks like a BB or PDA screen with up and down buttons that call graphical objects for display. It also allows zoom in on certain parts of the image when you position then click and hold the trackball on a Blackberry. (The description above is how it works when you browse using the standard BB browser.)

  When I try to click on buttons or graphic, nothing happens.  I guess I did a class/method required and appeals against it, but being new, I don't know how to do it and did not find documentation online to point me in the right direction.

  What I want to do is one click of the buttons via the trackball or press and hold the trackball to zoom feature work.

  Here is the code I use:

  package com.beginningblackberry;

  Import net.rim.blackberry.api.browser.Browser;
  Import net.rim.blackberry.api.browser.BrowserSession;
  Import net.rim.device.api.ui.UiApplication;

  SerializableAttribute public class BrowserApp extends UiApplication {}
      
  Public Shared Sub main (String [] args) {}
  BrowserApp instance = new BrowserApp();
  instance.enterEventDispatcher ();
  }

  public BrowserApp() {}
  Private site = Browser.getDefaultSession ();
  site.displayPage ("http://www.ssec.wisc.edu/data/paw/usus_usa_radr_imag_none.html");
  System.Exit (0);
  }
  }

  Any help is very appreciated.

  VBRefugee, I think you should start your programming BlackBerry checking the development layout of how the UIApplications are built. The UiApplication class does not display of really anything on the screen by itself, rather you would lead to an extension of a class of display on the screen where you can be private pushScreen (MainScreen()) again and you would customize your layout in the constructor of your screen extension adding your controls with a field of embedded browser. Take a look at some of the applications delivered by the JDE and the eclipse plugin example. I think it could help you, but I could have misunderstood.

• Internet Explorer cannot be opened by using the built-in Administrator account. Sign in with a different account

  Fixed HP laptop bios update has disabled the option to open all the apps. Simple BUT frustrating built-in Administrator fascist authoritarian East

  Hi Dean,

  Built-in Administrator account does not have a split token and metro apps may not work under full administrator token. So metro apps cannot be turned on with the built-in Administrator account.

  I recommend you create a new user account to access the User Interface modern apps.

  Check out the following link to create a normal administrator user account.
  Which user account is right for me?
  http://Windows.Microsoft.com/en-us/Windows-8/which-user-account-for-me

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

  Hope the information is useful. If you have any other questions, answer here and we will be happy to help you.

• Performing a Firmware Upgrade using the built-in Web server

  This video provides step by step instructions to perform a firmware update using the integrated Web (EWS) server for single function of HP LaserJet and multifunction printers.

  For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support.

  This video was produced by HP.

  I hope you find this information useful.

• Reports of the Scores without using the built-in Quiz

  Is it possible to set up a 'quiz' in captivate, without using the integrated questionnaire slides?

  Quiz slides are very restrictive and clumsy and I'd rather build them myself.

  So, say if I had a slide that was a question on it and two buttons to answer 'true' and 'false '. Is it possible to use these buttons to execute advanced action, which assigned a score that could then be reported to LMS?

  Sorry if this is a silly question.

  Best

  M

  Maybe you've never found my blog? Have several articles on custom questions and reports of these issues.

  Custom report issues - part 1 - blog of Captivate

  Custom report issues - part 2 - Captivate blog

  You can find more, using tags. There are some limitations of custom questions: no question pool, partial scores and penalties are difficult/impossible if you use not JS.  & Sliding is a type of hybrid issue that allows for customization as well. Here are the latest articles on custom questions:

  Custom short answer Question - Captivate blog

  Hotspot issues in Captivate 8 - Captivate blog