Using the built-in menu to create a context menu

Similar Questions

• No output in Onyx2 during the deployment of a clone using the commissioning of NetApp & cloning - create a quick Clone in vSphere 4.1

  I am recording the Onyx2 PowerCLI 4.1 vSphere client format output. I'm trying to run a NetApp Flexclone of deployment using the commissioning of NetApp & cloning - create quick "clone" from the context menu.

  As I went through the wizard Flexclone, all right, but when I finished the wizard vSphere watch clone task works, but there is no output in the window of Onyx 2.0.

  Is it possible to capture this information in Onyx, I need to automate / schedule a task to do this on a daily basis.

  Any help is appreciated.

  Kind regards

  Scott.

  Onyx allows you to capture the API public vSPhere.

  This rapidclone use vSphere public API?

  This feature is not expected in the NetApp PowerShell module?

• I was on facebook and remove an icon by using the right-click menu, but then all my photos and pictures of profile, could no longer be seen. I was able to view them in the browser, so it's something I've done in Firefox. How can I unlock a site? "

  I was on facebook and remove an icon by using the right-click menu, but then all my photos and pictures of profile, could no longer be seen. I was able to view them in the browser, so it's something I've done in Firefox. How can I unlock a site?

  If you select that right click menu context then you block all images from this area and not a specific image, so do not use that.

  • Check exceptions in tools > Options > content: Load Images > Exceptions (for example sphotos.ak.fbcdn.net)

  You can use the following steps to check if the images are blocked:

  • Open the web page that has the missing images in a browser tab.
  • Click the site favicon (How do I know if my connection to a Web site is secure?) on the left end of the address bar.
  • Click on the "More information" button to open the "Page Info" with the Security tab selected (also accessible via "tools > Page Info").
  • Go to the Media of the window tab "tools > Page Info.
  • Select the first link of the image and scroll down through the list with the arrow down.
  • If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

• How to activate and use the built-in webcam

  built in webcam

  How to activate and use the built in webcam on my desktop Dell Inspiron 1?

  MikeViklund,

  Try to read...

  Use and troubleshooting of the Webcam Dell and Dell Webcam Central Software

  Rick

• When I get an email, according to windowsmail with attachments, I can't file attachments by using the file command menu

  original title: impossible to file attachments in mail

  Hello; I'm with family Vista premium and windows mail as a messaging system. I was with IE8, and now I've migrated to IE9.

  When I get an email, under windowsmail with attachments, I can't file attachments by using the file command menu. This option is blocked. Under windows mail, I went to tools, options, security and made sure that: Let not the attachments which are unsecured... box be deselected. It makes no difference, and I still can't save attachment like this; I CAN SAVE BY CLICKING and opening the attachment and save it but it is not satisfactory that I can't save the attachment by using the file command menu.

  Can you help me please?

  IE9 is certainly the culprit and there is more questions. I know that some MVPs have contacted their MS threads about it and even received no answer.

  My guess is that MS will not address this issue. Do not forget that the development team of Windows Mail is dissolved by the MS in June 2006. (Yes, while Vista was still in beta). I seriously doubt they care.

• For 2 years, I used the built in camera 1.3, suddenly out of dissappeared and when I click it it says is not installed.

  For 2 years, I used the built in camera 1.3, somehow suddenly dissappeared and when I click on says it is not installed, I don't want to go into a repair shop because they charge you too much money. Please help, thanks. my pc is windows 7.

  Original title: built in webcam 1.3

  Hi, Nancy,.

  Control Panel > add a device

  Windows will search for devices connected to your system, but not installed. Click on the name of the webcam which shows in the search box and then click "next".

  Choose whether you want Windows to search for the device driver webcam using Windows Update on the Internet, or if you prefer research of Device Manager to the driver using a disc provided by the manufacturer of your laptop. Most of the drivers are on the system recovery disk included with your laptop, if you choose to add the driver from the disk. Check the box of your choice, then click on "next >" to continue.

  Wait while Windows searches from the driver using Windows Update, if that is your choice. There's an active Internet connection for Windows to do successfully. Allow the computer to install the driver and then restart the system for the webcam to be recognized by the system.

  Otherwise, you can use the system recovery disk or a driver downloaded directly from the manufacturer of your laptop to install the driver without using search Windows Update.

  Open the CD/DVD-ROM drive and insert the disc of recovery system or place the driver downloaded from the manufacturer in a directory of files easily accessible on your PC, or on the desktop, or in your 'My Documents' folder.

  Choose the option 'install the software automatically (recommended)' into the application 'Add a device', then press on "Next >" to start looking for your webcam driver. The Hardware Wizard will search the system recovery disk and automatically installs the driver. Press 'Finish' to close the wizard, and then restart the computer to allow the recognition of the webcam. Choose the option "Install the software manually" in order to access the location of the driver where you saved the driver and install it from there. Use the open file manager and search for the driver. Click on the ' next > ' button to install the driver, and then restart the computer to add webcam functionality. -ehow.com

  Built in webcam not working not not in Windows 7

• Facebook like button does not work, I used the widget of muse and created the facebook code. Anyone know how to make this work?

  Facebook like button does not work, I used the widget of muse and created the facebook code. Anyone know how to make this work?

  Hi connally25,

  Here is a link to a video tutorial on how to add a Facebook button, please check if you have followed the same steps to add the video.

  http://TV.Adobe.com/watch/learn-Adobe-Muse-CC/adding-a-Facebook-like-button/

  If you followed the steps correctly and the button still does not; Here is a link to a forum thread which may help to solve the problem:

  Facebook follow Widget does not

  Concerning

  Sonam

• Internet Explorer cannot be opened by using the built-in Administrator account. Sign in with a different account

  Fixed HP laptop bios update has disabled the option to open all the apps. Simple BUT frustrating built-in Administrator fascist authoritarian East

  Hi Dean,

  Built-in Administrator account does not have a split token and metro apps may not work under full administrator token. So metro apps cannot be turned on with the built-in Administrator account.

  I recommend you create a new user account to access the User Interface modern apps.

  Check out the following link to create a normal administrator user account.
  Which user account is right for me?
  http://Windows.Microsoft.com/en-us/Windows-8/which-user-account-for-me

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

  Hope the information is useful. If you have any other questions, answer here and we will be happy to help you.

• I can not even open FF because the profile is not found, even after using the profile in order to create a new profile.

  I've recently upgraded to version 40 39.0.3. The first upgrade was not so I removed FF using the control panel (uninstall program). I reinstalled again, but I got the messages that FF was already running, etc. as other users have noticed. I open profiles (Open firefox.exe - p) and tried to open FF with the "default" profile that did not work. I created a new profile ("defaultuser") and FF open. (I have the box checked to use the new profile on startup). I have created FF as I wanted it, and then exit. When I started later FF, the profile is not found. The profile did not have the "defaultuser" profile, does not open with the "default" profile, but would a new profile must be created and FF to open and run. Quit FF and reopen produces the same sequence (profile not found, etc.) I uninstalled 40 and reinstalled version 39.0.3 and I have the same problems with this version (39.0.3), plus he's starting the upgrade to version 40, and soon as I complete the installation again. I uninstalled the 39.0.3/40 version and reinstalled 40 using the Profiles page to write this question.

  I removed the version FF 40 using the Panel of control/uninstall. I deleted all the files that have been "* firefox *" and "* mozilla * ' (and there are some). I rebooted, and then reinstalled FF version 39.0.3. I could we FF immediately (without having to create a new profile). I have not had any problems with a bad certificate of Google, Yahoo, etc.. I went to all the web sites open very well. I could restart, then restart FF several times without problems or issues of certificate. Meanwhile, I made no changes to Kaspersky, and as far as I know, Kaspersky works as he usually does. I am almost sure that FF 40 version has a certificate problem that I can't fix. I'm less sure if the original upgrade to version FF 39.0.3 to 40.0.0 (then 40.0.2) played a role in my profile questions. Regardless, I have a version of FF that works and auto-updated to FF is off (and it will remain like that until I gather a few of this blog and other insurance which emits 40 FF are ironed out). I appreciate the help that you (and jscher200 in another thread) has attempted to provide. While the issues are not fixed, the thread can be closed.

• VI Analyzer in an application using the built

  I have an application which is designed for a continuous integration server.  This application uses the VI Analyzer API (Labview 2009 for the moment) to run a series of tests on a case of the screws.  The problem is that when the program is run like VI all is happy, that the folder is added using the 'Add VIAn Item.vi' and the task runs on the four VI in the folder.  But when the VI is built and comes as an exe file, 'VIAn Add Item.vi' appears to add the folder but no vi is analyzed and if a specific VI is given then error 53 is thrown by "NI_FileType.lvlib:Get leader Type.vi.  Is it just a case of not being able to use the VI Analyzer API in a built application that is running as an exe?  I have attached the front panel of the application built after he was executed and the rear panel of the source code in question; There is more that the rest is just to determine the paths to analyze.

  The VI Analyzer API is not supported in a built EXE.

• Edge 40-how set up and use the built-in Wecam? It is not listed in Device Manager.

  We just bought this new advantage 40 with the built-in webcam, but it does not appear in our Device Manager, or find how to use it or put up in assistance with this.

  How can we put in place and use it?

  Thank you

  Found the problem. The software has never been installed.

  I downloaded the software from yawcam and the camera has come magically to life.

• I would like to recover my computer by using the recovery disks that I created. There is NO OPTION!

  I have a ' aspir ' 5750-6414

  I got a bad virus, but I did create recovery disk (4 or them)

  I would like to recover my computer by using the recovery IMAGE.

  The bootable disc, but it does not give me the option to use MY recovery disks. It gives only factury default of restore options.

  I tried to restore my computer to the image I created when the computer was new that had a lot of my program, including ms word for hour.

  Can anyone help?

  Thank you. That's why presence. The person who set up my computer a few years ago gave me these discs and I assumed it was a picture. My mistake.

• Not able to use the built-in webcam

  I have a HP Pavilion dv6t - 6 c 00. I've upgraded to windows 7 ultimate which I had windows 7 Home premium that I could use the webcam, but now it displays an error when I open cyberlink youcam "warning, no webcam detected. Try connecting a webcam on your computer now. If you are using a built-in camera, make sure it is turned on." I looked and tried all the steps except the final step that the cyberlink youcam software does not allow me to click on the configuration settings. What should I do to activate my webcam?

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• How / can I use the built in camera on Asus laptop to take pictures?

  I don't know if you can answer this question, but I will ask the case. I have an Asus laptop running windows 7. I noticced theres a webcam above the screen, but I can't find a way to activate it in order to download and send photos. I searched for at least a few hours which made me curious of if the Asus laptop can even take pictures, or if the unit is only for VideoChat?

  To use the web cam, you have 2 options.

  option 1

  * Go to www.picanom.com

  * Click on allow if a box appears

  * Click on the snap

  Review of the photos that you took and click on save or print in the upper left corner of the image.

  * After clicking on save, click Download.  She will appear next to the "print" key.

  Option 2

  You must have the software to use the webcam.  I searched in google and foundhttp://www.yawcam.com/download.php as the best free software.

  Also, I found this one if you do not want to install a program.  You just download this, but you don't have to install it.  It would have been my choice #1, but it appears that half of my webcam, as something was covering the other half.  It took good pictures, but with a built-in cam, it sucks because actually you have to be sitting on the side to be centered.  You can try it on your PC, it can run different.  I have a Mac Book Pro with boot camp installed running under windows 7.  This is maybe why it did not work for me http://www.softpedia.com/get/Internet/WebCam/Rebellious-Productions-CamSnap.shtml

• Inability to make a selection of the screen using the built-in browser

  Hi all.

  Java newbie here - coding experience is VB.

  I'm trying to code using the JDE Eclipse against Sun JDK 6 for a Curve 8900 platform, V4.6.1.250, 4.2.0.113.

  I have a dirt simple browser application that accesses a single Web page. Exit the screen of the page is formatted for PDAS and other portable devices.

  The images on the site looks like a BB or PDA screen with up and down buttons that call graphical objects for display. It also allows zoom in on certain parts of the image when you position then click and hold the trackball on a Blackberry. (The description above is how it works when you browse using the standard BB browser.)

  When I try to click on buttons or graphic, nothing happens.  I guess I did a class/method required and appeals against it, but being new, I don't know how to do it and did not find documentation online to point me in the right direction.

  What I want to do is one click of the buttons via the trackball or press and hold the trackball to zoom feature work.

  Here is the code I use:

  package com.beginningblackberry;

  Import net.rim.blackberry.api.browser.Browser;
  Import net.rim.blackberry.api.browser.BrowserSession;
  Import net.rim.device.api.ui.UiApplication;

  SerializableAttribute public class BrowserApp extends UiApplication {}
      
  Public Shared Sub main (String [] args) {}
  BrowserApp instance = new BrowserApp();
  instance.enterEventDispatcher ();
  }

  public BrowserApp() {}
  Private site = Browser.getDefaultSession ();
  site.displayPage ("http://www.ssec.wisc.edu/data/paw/usus_usa_radr_imag_none.html");
  System.Exit (0);
  }
  }

  Any help is very appreciated.

  VBRefugee, I think you should start your programming BlackBerry checking the development layout of how the UIApplications are built. The UiApplication class does not display of really anything on the screen by itself, rather you would lead to an extension of a class of display on the screen where you can be private pushScreen (MainScreen()) again and you would customize your layout in the constructor of your screen extension adding your controls with a field of embedded browser. Take a look at some of the applications delivered by the JDE and the eclipse plugin example. I think it could help you, but I could have misunderstood.