I use Vista, Windows Movie Maker. Problem publishing movies on computer.

Similar Questions

• Vista Windows Movie Maker gives message "doesn't fit" releasing on DVD.

  Vista Windows Movie Maker gives an error "does not fit" when I try to publish my movie to a DVD (12 minutes too long). I removed half of the clips in the storyboard table and I still get the same error. The length of the film remains 02:42.

  If your burner is compatible... a double layer 8.5 GB DVD blank may be worth a try.
  (failure is a real possibility... make a video 02:42 is more than most systems)
  can handle)

  After the removal of the files in the storyboard table did you resave the project before embarking
  DVD Maker?

  The following older maybe offer some ideas on reducing the size of the project.

  Movie Maker - how to divide a project complex smaller?
  http://www.myvideoproblems.com/tutorials/MovieMaker/SplitComplexProject.htm

  In many cases not most of the large case projects / complex problems.
  Creation of several small projects and recording each in the. Film WMV
  format in a folder on your hard disk may be the answer. Then you can import
  the collection of. WMV to DVD Maker files and each clip becomes a scene
  (Chapter) you have to have up to 18 scenes.

  Good luck...

• Why I can't move or delete files that have been used by Windows Movie Maker?

  Why I can't move or delete files that have been used by Windows Movie Maker? How to make them free again, now that I want to use the new computer.

  When you create a project in Movie Maker-.mswmm file... it
  records the path to the source (photos, videos, music) files...
  If you re-open the file .mswmm to re - edit source files...
  are not accessible if they have been moved or deleted.

  If "no" re - edit project .mswmm files...
  moving or deleting the source files is not a problem.

  If you 'are' the intention of re - edit .mswmm files but need the
  source files also... just make copies and let it
  original where they are.

• Windows dvd maker problem: I hear but not image using windows DVD maker.

  I can hear but not image using windows DVD maker. A few obvious reasons? It's strange because it used to work and now a few months later it does not. The image is there in the start menu of the main menu, just before you press play it starts to play sound with no photos after I press play. Please help, steve gratefully.

  original title:
  Windows dvd maker problem

  Maybe the part "What to do if you have questions" of the following
  article would offer some ideas.

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

• I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  Hi ddbowers01,

  The other shortcut keys work?

  Try pressing CTRL + ALT + DELETE and then try to lock the computer and check.

  Check the setting below:

  a. in the Control Panel, click user accounts.

  b. click on change the way users log on or off the power.

  c. Click to uncheck use the screen of welcome for a quick and easy connection.

  d. click OK.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Movie Maker problems Publishing a half green screen

  Everytime I try to publish a movie from Windows Movie Maker finshed product comes out with the bottom half of the greenery of the photo and only half scrambled upward.  Very frustrated.  Tried with MP3 music and not at all.  Nothing helps.

  I have no idea what a codec is and had to install Xvid.  But it worked great and was very very easy!  Thank you!  Happy Days!
  Corinne

  ================================
  You are welcome.

  Thanks for the update.

  John Inzer - MS - MVP - digital media experience

• Vista Windows Movie maker clip sent by e-mail, but cannot be opened by recipient of Vista: how to fix?

  1. how to ensure a video clip is visible on the compatible PC?
  2. how to convert a movie file type to be viewed on a Mac?

  Hello
   
  Please answer the following questions so that we can better help you.
  1. what e-mail program you are using to view the clip?
  2 what is Windows Mail or Internet Explorer?
  3. that you get an error message when tried to open the clip?
  4. is the item sent by a user by electronic mail is running Vista or any other operating system?
   
  First, download the clip, save it to the desktop and try to open it using Windows Movie Maker.
   
  "Thanks to jakeludington for providing the following valuable information."
   
  How to convert Windows Movie Maker files in a Mac compatible file?
  Windows Movie Maker files are the format of Windows Movie Maker project. The files say things to Windows Movie Maker on your video editing project like video clips are used, which audio files you have imported, go to what transitions between clips, and whose effects are used. These files are essentially readable only in Windows Movie Maker and certainly doesn't work on a Mac. Two options to save a video file in Movie Maker are DV - AVI or WMV. To create a Mac compatible video file, open the file in Windows Movie Maker in Windows Movie Maker, save the movie to the highest quality WMV or preferably as a DV - AVI file format. Import the AVI or WMV file ended up in iMovie or another Mac video editing application.
   
  To convert Windows Movie Maker files in Mac format, please post your request here: http://discussions.apple.com/index.jspa
   
  I hope this helps.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• This is the message I get when I try to add the audio to Vista windows movie maker that the devil is a codec & where can I find the right one to download?

  The file Morrison\Moondance\05 in the Mystic.m4a of C:\Users\kathy\Music\iTunes\iTunes Music\Van cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.

  There is a compatibility issue with the M4A file.
  Convert M4A to WMA and the
  importation should be allowed:

  There are to many converters available on the net...
  the following links are some examples.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (6) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)

• Windows MovieMaker or Windows DVD maker problems

  I did a film with clips in MM and all is well. However, when I publish on DVD, it save the project and opens in the creation of DVD. It starts encoding, gets to 2.5% and stays there forever (overnight).

  If I try to publish the movie on the computer, it goes to the screen 'Édition Movie' and never moves from 0%.

  I literally spent about 20 hours. try to make a film of 40 min. of school my son concert.

  Should I forget MS product and buy software that works?

  Hi c1tobor,

  This issue could be due to present video filters on the computer.

  I suggest you try the following steps:

  Step 1: Disable filters in windows movie maker:

  Director of open windows

  1. click on Toolsand then click Options.

  2. click on the compatibility tab.

  3. to turn off a filter, clear the check box next to the name of the video filter.

  Now check if the problem is resolved.

  Video-filters-in-Windows-Movie-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/video-filters-in-Windows-Movie-Maker-frequently-asked-questions

  Step 2: Choose a low quality or file SETTING when you publish your movie. For more information, see the movie settings: frequently asked questions.

  For more information, see the following links:

  Solve problems with publishing a movie to your computer
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Solve problems with publishing a movie to a recordable CD
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-a-recordable-CD

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible resized using Vista Windows

  original title: no more resized windows using Vista

  Media Center are not resized - full screen or no screen. Also can't open multiple windows. Any suggestions?

  Hello

  ·        You did changes to the computer before the show?

  ·        What happens when you open several windows?

  Method 1: I suggest you run the SFC scan to check if system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: You can also try to uninstall and reinstall Windows Media center and check if it solves the problem:

  Uninstall Media Center

  a. click the Start, select Control Panel, click programsand then click on turn Windows features on or OFF.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. develop media and uncheck the box next to Windows Media Center.

  Reinstall Media Center

  a. click the Start, select Control Panel, click programsand then click on turn Windows features on or OFF.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. develop media and check the box next to Windows Media Center.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-features-on-or-off

  Method 3: you can check the number of the new user account:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem does not persist then fix the corrupted profile by following the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

   

• Windows dvd maker problem

  whenever I try to make a dvd with DVD maker, windows stops the program suddenly after adding video files and click Next. This happens every time that I'm unable to burn the dvd

  The message appears as follows:

  Windows DVD Maker has stopped working
  
  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  Can anyone suggest a solution?

  Hi Bindu Prasad,

  Create DVD Windows stops working due to incompatibility with one or several codec files that are obsolete or incompatible with the project or the DVD Maker software itself.

  (Obsolete or incompatible) Codec files must be located and renamed to resolve the issue.

  1. open the start menu and type event viewer in the start menu search bar. Open event viewer from the menu.
  2. in the case of Viewer click Windows logs in the left panel
  3. click on application under Windows Logs logs
  4. search for the error messages listed in the event viewer window Central Panel and double-click on the error to check if it log is linked to the creation of DVD.

  Example of error log:
  Signature of the problem
  Problem event name: APPCRASH
  Application name: DVDMaker.exe
  Application version: 6.0.6000.16386
  Application timestamp: 4549b5b0
  Fault Module name: nevideohd.ax
  Fault Module Version: 4.6.15.0
  Timestamp of Module error: 459bb828
  Exception code: c0000005
  Exception offset: 00008b 89
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1062

  5 locate the name of the Module of fault, it must be a file with the extension. CXL
  6 once identified the name of the file, try to locate the file in the C:/Windows/System32 folder.

  (Please click on view the content if the files do not appear automatically).
  7. If the files are not listed in the System32 folder, find the file with search containing the files and system files.
  8 find the file and rename it.
  9. check if the problem persists. If the problem persists and the error message appears again, find the new file which is the origin of the problem of event, error log viewer.

  -Can also uninstall any third party burning programs and software codec that these could cause the error.

  Kind regards

  KarthiK TP

• How to split a video for use with Windows Movie Maker

  movie maker help?

  my video is too long, so he used open, does anyone know how I can divide or shorten it so I can open it in movie maker?

  Thanks :)

  my video is too long, so he used open, does anyone know how I can divide or shorten it so I can open it in movie maker?

  Thanks :)

  ===============================================
  Are you sure that is the problem and not an incompatible format?

  In any case... the following freeware might be worth a try:

  VirtualDub
  http://www.videohelp.com/tools/VirtualDub
  (left click of he who said):
  "Download from mirror (direct link) (1.3 MB)")
  (installation is not necessary... just unzip)
  and run it by clicking left VirtualDub.exe)

  VirtualDub: Splitting AVI files
  http://www.Afterdawn.com/guides/archive/cut_avi_with_virtualdub.cfm

  VirtualDub: How to split the video
  http://www.ScreenVirtuoso.com/VirtualDub-split-video.html

  Video editing tutorial - using VirtualDub
  http://www.astahost.com/info.php/video-editing-tutorial_t11655.html
  > not compatible with .wmv or .asf files

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I need to reduce the quality parameters of the videos that I have in my video file - I have this accompolished with success in the past, but is no longer remimber the exact process I used in windows movie maker

  I import a video game in my video camera - this is usually the major e-mail easily - I succsufully reduced the quality setting in movie maker window in the past in the medium range and they e-mail very well - for some reason I forgot the process for this - it's very sikmple - I can't find the the right path to get there - please help - John

  Memory
  File
  Save movie file
  My computer
  Enter the file name and choose the location
  Show more choices
  Other parameters
  and then choose e-mail from the drop-down list.

• Conversion of .vob to use on Windows Movie Maker

  I have a sony dcr-dvd305 handycam.  When I copy the files on my computer, him coming up with a .vob extension.  I have Koyote converter program.  What format can I convert to for the filmmaker.  I did something and they are fine.  They tried .avi and they come out blurry.  What I do in conver to? Thank you

  I have a sony dcr-dvd305 handycam.  When I copy the files on my computer, him coming up with a .vob extension.  I have Koyote converter program.  What format can I convert to for the filmmaker.  I did something and they are fine.  They tried .avi and they come out blurry.  What I do in conver to? Thank you

  WMV format.

  t-4-2

• Windows Vista-&gt; Windows 7 recovery problems

  Hi all.  First time poster here.

  Product = Compaq Presario 5550f desktop computer.  Windows Vista originally in November 2008, then upgraded to Windows 7 as soon as it was available.

  I recently caught a virus and all through the elimination of the virus in my office stopped the start (I think I've damaged boot sector).  Start diagnosis indicates a problem of disk (the disk scan did not complete).  As I worked on it longer, I've lost the ability to enter the Recovery Manager with the F11 key at startup, so I can't erase and start over.

  I pulled the hard drive, installed on my other desktop computer as a secondary drive and saved all my files (which I should have done before you start working on it...).  Also tried checkdisk on the other computer and he "found and corrected errors.  Installed in the original computer and still will not start.  Tried the Vista recovery disc I made in 2008 and get a '0 x 4001100200001012' error when loading files of operation is completed.  Did Windows 7 recovery disks, but from what I can tell the recovery partition is not get improved anyway.

  One possibility would be to order HP recovery disks, but if those that I did does not work, do not know HP ones.  I could reformat the partition C: to restore to another desktop computer, but makes me a little nervous.  I can't find a way to force it to boot directly from the recovery D: partition in the installation program.  What else can I try?  Help!

  Jeff

  In the process of closing the computer after typing my post, the computer went into Manager recovery by itself.  Maybe try to rerun the recovery discs did something?  Anyway, wiped her clean and back on Vista now (it sucks as far as I remember) and on my way back to Windows 7.

  Jeff