where to find and use the (HCL) hardware compatibility list for Windows xp3

Similar Questions

• Can I use Windows 7 Upgrade media to upgrade a Vista computer that has not been upgraded to service pack 1? Can I use the option of custom Setup for Windows 7 Upgrade media? I would go from Vista Home Premium to Windows 7 Premium.

  The computer on which I am trying to upgrade is vascular under Vista Premium, but it was never upgraded to Service Pack 1. He has a problem with PIECES that is caused by a defective ntdll.dll module and so the updates do not work. Windows Upgrade Advisor tells me I must update Vista SP1. I really don't want to spend the time to solve the problem of Vista. I would like to just do a clean install using the custom install option on the Win7 upgrade support.
  Help.

  Wrong forum. This post here instead, questions please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  That being said, you can not use an upgrade to Win7 edition to make a clean installation on a computer running Vista without SP1 installed, but you can buy a complete edition of Win7 (detail) and install it after formatting your HARD drive. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to find and use the "disposable" email addresses

  Sometimes, I get a notice at the bottom of the screen that I can use disposable or disposable email addresses if I don't want to use my regular. I don't know how to do this in the help sections.

  You may specify where you see these messages? Firefox and Mozilla don't provide no e-mail services, but you can use something like gmail, simply create an email address at which you care and use that as a "disposable" email address.

• Where to find and install the font "Arial" on Windows 7?

  Original title: INEED TO INSTALL THE "ARIAL" FONT - STYLE "REGULAR" OF MY DISC of INSTALLATION of WINDOWS 7
  
  I SPEAR THE SOFTWARE THAT NEEDS REGULAR ARIAL FONT.  THREE STYLES OF ARIAL SHOW AS BEING INSTALLED ON MY MACHINE, BUT IS NOT REGULAR. MSWEBSITE SAID IT IS ON THE WINDOWS 7 DISK, HOW TO FIND AND INSTALL IT.  Thank you.

  Go to control panel > display large icons > fonts...

  If you see "Arial" in the list, it is the regular version of Arial as far as the disc of Windows 7 is concerned and you have already...

  However, others have also asked this question and, apparently, this download of fonts should solve your problem...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16083

• Where to find and download the presentation of the Oracle Open World 2011

  Hi all
  
  We presented in OOW2011 and all presentations were previously available through content catalog. However, I just noticed that the URL of this catalogue of content is no longer valid and campaign OOW2012 is all over the internet.
  
  Can anyone suggest it please where refer to 2011 presentations OQ now?
  
  Thank you
  
  Allen

  Allen,

  This presentation concerns because of the OPA?
  Homepage changed for 2012, but you can search for the blog page.

  http://www.Oracle.com/us/corporate/press/338122

  Blog: https://blogs.oracle.com/oracleopenworld/
  Oracle OpenWorld on Oracle Mix: https://mix.oracle.com/groups/10562?post_page=2

  Area of knowledge of the OPA
  http://www.Oracle.com/partners/en/knowledge-zone/applications/policy-automation-042908.htm

• SQL how to use a variable and use the result as a reference for the name of the table

  Hi all

  I have new in the declaration of Oracle, sorry in advance if something is easy for you all. BTW, I have this scenario:

  I have a table OL structured in this way:

  Date - it contains dates, for example 11/01/2015

  TableName - it contains strings, for example, OL1, OL2, OL3 and so on...

  Then I have a different table, the name of these tables are of the same name in the table of the OL, so I have table table, OL1, OL2, OL3 table and so on. The structure of these tables is the same. And Yes.

  table OL1

  ---------------------------------------------------------------

  ID LAST NAME FIRST NAME PHONE

  ---------------------------------------------------------------

  1 JOHN DOE 12345679

  2 PAUL 111111122 TIBBS

  table OL2

  ---------------------------------------------------------------

  ID LAST NAME FIRST NAME PHONE

  ---------------------------------------------------------------

  1 ANNA KRAIG (NULL)

  NATHAN FRESHMANN 111111133 2

  If the scenario is clear, I would like to retrieve the value (null), research in all the OL * tables by using the value of the OL table (tablename) max.

  If I'm going to do these simple steps, I got the result:

  Select max (TableName) OL

  the result will be OL2

  # I know not how to use the option set to avoid changing the table name in the sql statement all the time.

  set mytable = 'OL2.

  Select Name, family name

  of & mytable

  When the phone is null

  Any idea?

  Thank you very much in advance.

  Hello

  run immediately "select dt.log_id, obj.presentation_name, dl.begin_time

  bulk collect into v_result_set

  of ' | v_ol |' dt join internal ol_object obj on

  DT.object_type_id = obj.object_type_id

  inner join ol_chunk_log dl on

  DT.log_id = DL.log_id

  where dt.data_value is null';

  dbms_output.put_line (v_ol);

  end;

  Correct the code such as:

  run immediately "select dt.log_id, obj.presentation_name, dl.begin_time

  of ' | v_ol |' dt join internal ol_object obj on

  DT.object_type_id = obj.object_type_id

  inner join ol_chunk_log dl on

  DT.log_id = DL.log_id

  where dt.data_value is null' bulk collect into v_result_set;

  
  

  for i in v_result_set.first ... v_result_set. Last

  loop

  dbms_output.put_line ('LOG ID: ' | ) ( v_result_set.log_id (i)) ;

  dbms_output.put_line (' NAME CLOSELY: ' |) v_result_set.presentation_name (i));

  dbms_output.put_line (' START TIME: ' |) ( v_result_set.begin_time (i)) ;

  end loop;

  end;
  

  Kind regards.

• Deploy and use the shared library in VeriStand for several VCD

  Hello world

  I'm using LabVIEW 2011 SP1 and VeriStand 2011 SP1.

  We have developed many custom features that use a shared code (C++ and LabVIEW code).

  For now, there is a copy of the C++ shared in each custom device dll.

  The problem is when we change the C++ dll and we forget to copy a new one to each custom devices, the oldest one that can be used by each custom devices.

  We would like to do is not to have only a single dll shared in a specific folder.

  My questions are how we can deploy this dll to a specific shared folder in VeriStand?

  Is there a specific folder that we can use to do this?

  Is it possible to deploy using the measurement and Automation Explorer?

  If someone has an idea, you are welcome!

  Best regards

  CFOE

  You can display this question in another forum that I don't think there's anything directly to do with NI VeriStand.

• How to find and use the video converter total already installed on my windows7 pc toolbar

  I tried to install total video converter that would appear as a bar above the search bar. But I was told that I have told you from. Unfortunately, I'm unable to find it, much less use it. Could you please advice me.

  OLIVIER OLIVIER

  EZEIDI ONICHA

  NWA Omar na-echi eze

  Hi Olivier,.

  How did you know that the application has been installed?

  Check if the program is installed in the Panel.

  was: Start Type programs and features in the search box and press ENTER.

  b: Now, locate the program in the list to see if it is installed or not.

  Good day!

  Please let us know about the State of the question.

• How to find and use the background textures in a paper or a poster?

  I'm looking for other than just flat color textures, or gradients.  Textured background would work well for a poster I've created.  How can I find these to be included in a Pages document?

  I'm also looking for interesting fonts.  How can I find the fonts other than those supplied with Mac OS x?

  You already have your browser open:

  Search for Textures and fonts.

  OSX accepts the format of any graphic that handles Quicktime: .eps, .gof, .jpeg, .pdf, .png. AI. PS and more

  OSX accepts the following font formats: .ttf, OTF, Type 1 Postscript. The best is .otf.

  Peter

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• Where can I find and download the file "Windiag.iso" for Windows XP Home Edition?

  Where can I find and download the file "Windiag.ISO" for Windows Xp home edition?  IT TURNS OUT THAT HE MUST FIRST DOWNLOAD AND RUN A FILE NAMED 'MTINST. "EXE", AND THAT IN DOING SO, THE FILE NAMED "WINDIAG. ISO"IS CREATED.

  Hello

  You can check this link:

  http://oca.Microsoft.com/en/windiag.asp

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• Can I find out if I had to buy the Adobe Creative Suite 6 Design & Web Premium, but I subscribed to photography CC for only one month plans, can I unsubscribe it and use the one bought instead?

  Can I find out if I had to buy the Adobe Creative Suite 6 Design & Web Premium, but I subscribed to photography CC for only one month plans, can I unsubscribe it and use the one bought instead?

  I subscribed to the creative cloud only because I did not know that my College courses will be using other software too.

  I hope to unsubscribe to the creative Cloud version and use the purchased instead.

  But if it is not possible, I'll just use the CC version for this year and use the one bought on my other PC.

  Hi, NGOs,

  Yes, if you intend to use CS6, you can still use it after the cancellation of the plan of the CC photography, you can also improve your plan to plan photography to Creative Cloud applications

  If you wish to cancel your plan well photography please contact support by calling/chat for cancellation requests and billing queries:

  https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_cancel-your-memb ership_stillNeedHelp

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

  He hopes to help!

  Rayyan

• Can I download Vista Home Premium somewhere and use the product key I have now?

  Original title: ACER GRRRRR!  Can I download Vista Home Premium somewhere and use the product key I have now?

  I need to reformat my laptop Acer Aspire 5520, but Acer WON'T provide me with the disks required to do... so my question is this; How can I reformat without having to buy a new drive for Windows Vista?  I went to the site of the Acers and downloaded all the drivers, applications, and the bios, but I can't find anywhere on Windows.  Can anyone help?
  Thank you in advance for your help!

  Hello

  It s no vista for free and legally download

  with an acer you never drives with him press Alt + F10 when you see the Acer start at startup screen

  who should begin the process of recovery back to factory settings

  Acer has do provide you with a way to reinstall vista, either way or a recovery (Alt + F10) on your disk partition hard or using recovery discs

  and read this:

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• A Script to find and replace the layer names

  Is there scripts to find and replace the names of layers?

  There is an excellent script available for Photoshop that allows you not only to replace words in layer names, but also insert words as prefixes, Suffixes and sequential numbers.

  The version of the illustrator of this script allows only sequential numbering: it does not offer search and replace words.

  Ideally, it would be great if there were something that could find multiple and replaces in a go:

  (for example

  You have layers like this car, the dog, the bat

  You enter: because (Option1), dog (Option2), Bat (Option3)

  Your layers become then: option 1, option 2, Option3).

  )

  Big_SmiLe, which is a very good start! Step 1 of learning how to Script is indeed, by adjusting an existing simple script to make things more complicated. (And usually then "break something", which is also a necessary part of the process.)

  You are right your comment, it comes to repetitive things. For one or two different articles that wouldn't be a problem, but in the longer lists you are soon lost.

  As usual to work with lists of search - replace is to build a table:

  var layernames = [
  [ 'FHairBowlBoy *Hair', 'Hairboy1' ],
  [ 'FHairCurlyafroBoy *Hair', 'Hairboy2' ],
  [ 'FHairSpikyBoy *Hair', 'Hairboy3' ],
  ];
  

  The general idea is to loop through all the names, check if the current layer name is "layernames [i] [0]" (the left column) and if so, rename it "layernames [i] [1]" (the right column). If you know how to write a loop in Javascript, then you can implement this immediately.

  However...

  A more advanced method to do this didn't need even loop on all layernames - instead you can immediately 'get' the correct name by layer! It's magic! Almost!

  The trick is to use a Javascript object rather than a table. JavaScript objects are nothing special; "Layers" of Illustrator are an array of objects, and each object 'sex' has a 'name' property, which you can read and set the value. What I do here, is to create a new object, where the part 'name' is the name of the original layer and its value is the name of the new layer. All you need to check each layer is if there is a "object.originalLayerName" property and if so, assign its value to this layer name.

  It looks a bit like the table above, except that (1) you use {.} instead of [..] to create an object and (2) you add pairs "name: value" instead of 'value' only (in fact, the 'name' of a value in a table is simply her number).

  So here's what it looks like:

  // JavaScript Document
  var doc = app.activeDocument;
  // name indexed object
  var layernames = {
   'FHairBowlBoy *Hair':'Hairboy1',
   'FHairCurlyafroBoy *Hair':'Hairboy2',
   'FHairSpikyBoy *Hair':'Hairboy3'
  };
  // loop through all layers
  for (var i = 0; i < doc.layers.length; i++)
  {
   //Set up Variable to access layer name
   var currentLayer = app.activeDocument.layers[i];
   if (layernames[currentLayer.name])
   {
    currentLayer.name = layernames[currentLayer.name];
   }
  }
  

  Enjoy!