I want to get comp.mouse working again, was using the usb port.

Similar Questions

• Need help with query to get days of work there are using the calendar BOM

  RDBMS: 10.2.0.4.0
  Oracle Applications: 11.5.10.2
  
  I try to use the BOM existing in the EBS to calculate working days calendar, there is a report that I am train. The BOM calendar presents the working days and non-working with the weekend days and holidays listed as non-working days. The following query gives correct results, but I'm looking for two different ways to do the same without "the union. I have nothing against the "unions", but I feel that I'm missing a more elegant to get there way. The query will in Discoverer Plus 10.1.2.3, so using a statement 'By' is not supported.
  

  sample data
  
  calendar_code                calendar_date                 seq_num                     
  SAC-WRKDAY                   12/3/2010                     1817
  SAC-WRKDAY                   12/4/2010                                                              
  SAC-WRKDAY                   12/5/2010                                                              
  SAC-WRKDAY                   12/6/2010                     1818                                 
  SAC-WRKDAY                   12/7/2010                     1819                                 
  SAC-WRKDAY                   12/8/2010                     1820     
  SAC-WRKDAY                   12/9/2010                     1821
  SAC-WRKDAY                   12/10/2010                    1822
  SAC-WRKDAY                   12/11/2010                   
  SAC-WRKDAY                   12/12/2010
  SAC-WRKDAY                   12/13/2010                    1823             

  select calendar_code
       , calendar_date
       , seq_num
       , sum(decode(bcd.seq_num,null,0,1))over(partition by bcd.calendar_code order by bcd.calendar_date desc) workdays_ago
  from   bom.bom_calendar_dates bcd
  where  calendar_code = 'SAC-WRKDAY'     
  and    trunc(bcd.calendar_date) < trunc(sysdate)
  
  union
  
  select calendar_code
       , calendar_date
       , seq_num
       , -sum(decode(bcd.seq_num,null,0,1))over(partition by bcd.calendar_code order by bcd.calendar_date ) workdays_ago
  from   bom.bom_calendar_dates bcd
  where  calendar_code = 'SAC-WRKDAY'
  and    trunc(bcd.calendar_date) > trunc(sysdate)

  sample output
  
  calendar_code                calendar_date                 seq_num                      workdays_ago
  SAC-WRKDAY                   12/3/2010                     1817                                  3
  SAC-WRKDAY                   12/4/2010                                                           2
  SAC-WRKDAY                   12/5/2010                                                           2
  SAC-WRKDAY                   12/6/2010                     1818                                  2
  SAC-WRKDAY                   12/7/2010                     1819                                  1
  SAC-WRKDAY                   12/9/2010                     1821                                 -1
  SAC-WRKDAY                   12/10/2010                    1822                                 -2
  SAC-WRKDAY                   12/11/2010                                                         -2
  SAC-WRKDAY                   12/12/2010                                                         -2
  SAC-WRKDAY                   12/13/2010                    1823                                 -3

  Hello

  Of course, you should be able to combine these queries, something like this:

  select calendar_code
       , calendar_date
       , seq_num
       , sum ( CASE
             WHEN  bcd.seq_num IS NULL
             THEN  0
             WHEN  bcd.calendar_date < TRUNC (SYSDATE)
             THEN  1
             ELSE  -1
            END
          ) over ( partition by  bcd.calendar_code
                ,            SIGN (SYSDATE - bcd.calendar_date)
                order by        ABS  (SYSDATE - bcd.calendar_date)
              ) workdays_ago
  from   bom.bom_calendar_dates bcd
  where  calendar_code = 'SAC-WRKDAY'
  and    trunc(bcd.calendar_date) < trunc(sysdate)
  

  If you do not want to display some CREATE TABLE and INSERT statements for the sample data, and then I could test it.

  t_norwillo wrote:
  ... I have nothing against the "unions", but I feel that I'm missing a more elegant to get there way.

  Good thinking!
  When the two branches of the UNION query the same table, there is usually a more effective way: something that only requires a pass through the table.

• Is Windows Install - a shield Safe? If this is the case, how do I get it to work again.

  Original title: Windows install-A-Shield

  Hello

  I use to get automatic updates to install a shield and I've not been doing them for a while.  When I click on it I get a message that says: "Windows searches for ISUAPM, exe."  To locate the file yourself, click BROWSE. "When I click on BROWSE, files are empty for this application.

  1 is Install Shield Safe?

  2. If this is the case, how do I get it to work again.

  I'm running on Windows Vista Edition Home Premium and I have Windows Version 6.0; Service Pack 3.  If you need info to Add ' l, let me know.  I'm not educated computer, so please explain in detail because I don't want to crash my computer.

  Thank you for your help.

  Babacar

  Hello
   
  Contact install shield manufacturer for more assistance.
  Here is the link: http://community.flexerasoftware.com/

• How can I get my volume works again, ive lost somehow

  How can I get my volume works again, ive lost somehow

  How can I get my volume works again, ive lost somehow

  ====================================================
  The following links may be worth a visit:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (Win XP / Vista / 7)

  (307918) how to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918/en-GB

• Need help to get cc to work again on my desk, I move something and he couldn't get off work. Thank you

  Need help with getting creative to work cloud

  Launch the Office CC (applications tab) and try to go into preferences and exit - click the settings (gear icon), and then connect again.

• How can Hi I get my cs5 to start working again? Suddenly, the serial number has become invalid

  How can Hi I get my cs5 to start working again? Suddenly, the serial number has become invalid

  If you purchased CS5, you should have the case (with serial number) and the original dvd or if you have purchased online, this serial number will be in your adobeID profile.

  If you have downloaded CS5 a few years back, you reinforced the installer?

  The serial number should work - contact adobe if you activation problems - it could be you have CS5 installed on more than two computers, the license only allows two facilities - if you are trying to install on a third computer, you will see a prompt to disable the software on other computers.

• Need help to get my mouse recognized, all started after the installation of the center of the keyboard and mouse

  Original title: Microsoft mouse and keyboard Center

  Hello

  I'm sure this question has been asked and answered before.
  But I just bought a mouse Microsoft Sculpt comfort, downloaded and installed M and K Center. But it does not recognize my mouse, I plugged the mouse to my laptop until I downloaded M and K Center and it worked fine, but all I want to do is program the side button.
  I use a Lenovo ThinkPad X 61 with the latest drivers for Bluetooth and Win 7 Pro.
  Is there something I need to do to get my mouse to be recognized by the centre of keyboard and mouse?
  M

  Hi Matt,

  Please write to us.

  I recommend you to uninstall the drivers of mouse from the Device Manager, then use this link http://www.microsoft.com/hardware/en-us/p/sculpt-comfort-mouse#support to install the drivers. Please select the operating system and the correct version before installing.

  Same thing applies to the mouse and keyboard Centre has as well, use the same link to install the updated drivers after you uninstall from the control panel.

  Nice day!

• I downloaded and installed the XI and when open wants to buy DC and enter again which gives the serial number and the error.  Does anyone know how to talk with Adobe cat

  I downloaded and installed the XI and when open wants to buy DC and enter again which gives the serial number and the error.  Does anyone know how to talk with Adobe cat

  Hey Kevin,

  It seems that you are getting the update to install Acrobat DC. This is the latest version of Acrobat.

  If you get an error message, could you please share the screenshot of the same so that we can check at our end.

  If you want to contact Adobe support team, see the following link to get in touch with them.

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  http://helpx.Adobe.com/x-productkb/global/Service1.html

  Concerning

  Sukrit diallo

• the usb ports and DVD drive on my laptop of ts 17 want does not work correctly.

  My laptop dvd player cannot read software, flash drives and card readers and other usb devices d0esn ' t work correctly when inserted into the usb ports. I opened the Device Manager and noticed that the uj8c2 of ram dvd has a yellow triangle below. I clicked it and the State of the device as follows: WINDOWS cannot CE HARDWARE NOT CHARGE THE DEVICE. THE DRIVER MAY BE CORRUPTED OR MISSING. (code 39). the error status was ox x %. Today, I downloaded technical assistance from hp and when he ran a check on the system, it recommended two options for downloading 1. HP NOTEBOOK SYSTEM BIOS UPDATE (processors intel). 2 HP PC HARDWARE DIAGNOSIS UEF. I tried to download but were not available. I don't know if this problem can be corrected by the Manager of recovery so please let someone help out me. This month will be the third month, since it was purchased. Thank you in advance for your answers.

  Hello:

  For the DVD player, please try troubleshooting step 3 on the link below.

  http://support.Microsoft.com/kb/314060

• I removed the nano-receiver to the USB port & back the mouse did not.

  I have 2.4 GHz Wireless Nano Mouse (model MP2375BLK) optics.  I removed the nano-receiver to the USB port & back the mouse did not.  Batteries are fine, if I remove the battery and put it back in the red light flashes once, but the mouse will not turn on.  I checked the State of the mouse in Control Panel control (devices & printers) and it indicates that the device is functioning!

  I thank God for warranties.  Just bought itOn June 3.  Summer works fine until I removed the nano-receiver of the laptop, did not work again!  Let's get back to the store.

• Error "Windows has stopped this device because it has reported problems. (Code 43) "when I try to plug my mouse optical usb into the USB port.

  Original title:

  First here is my card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02479651&cc=ca&dlc=en&lang=en&lc=en&product=4299342 desktop pc
  and my mobo card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02560084&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=4299342
  (running windows 7 x 64 and not changed all my pc hardware so everything on the Web page is true)

  in any case, when I try to plug my mouse optical usb in the port of e/s (usb port) on the front panel (which supports usb 2.0) a notification pops up saying
  "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it. Help to solve this problem, click this message. "
  so I click it and and called up pop-up windows
  "the usb device not recognize."
  display 1 unknown device. Link to the image: http://img38.imageshack.us/img38/3579/usbdevicenotrecognizewi.jpg
  Then I double click on it, next pop up another window called "unknown device properties" and under "device status", he said:
  "Windows has stopped this device because it has reported problems. (Code 43) »
  Link to the image: http://img204.imageshack.us/img204/8597/unknowndeviceproperties.jpg

  Also the same things happen when I plug in usb, keyboard , but not when I plug a flashdrive usb 2.0 without notification or anything pop up.

  Here's what I'm trying to fix it but ended up with saying it was installing the device, installation failed and getting the error failed and unrecognized again...

  • Plug my optical mouse on my other ports and it works perfectly fine (to see if its working)
  • Plug the mouse (in the wrong port), went to Device Manager and uninstall the unknown device, reboot with usb plug in and have the connection to the internet (not decided)
  • Uninstall all devices under USB bus controllers in the Manager device and rebooted with mouse in internet connection (not decided)
  • Went to device manager expanded bus controllers USB right-click on power management all the device label "usb root hub" click and uncheck the box "allow the computer to turn off this device to save power" and reboot (do not set)
  • Open the normal startup in msconfig (system configuration) selected and restarted (did not set)
  • Shut down the computer, disconnect the plug, unplug all the devices connected to all IO ports (usb port specifically) and my desktop pc has left alone for an hour and a half and start it to the top after with everything back plug (mouse in the wrong port) (has not set)

  Note: when the mouse is connected to the usb port it is light on substance, but its does not (not flashing do not and when you move, mouse is frozen on the monitor)

  Hello

  The results highlight the drivers. It is best you contact HP support and get all the latest device drivers.

  http://WWW8.HP.com/ca/en/support-drivers.html

• Qosmio F10: Edition of USB-mouse - how can I reinstal drivers USB port?

  Hello

  I am the owner of a Qosmio F10 with Win XP MCE.

  I have recently encountered problems with my USB ports I have 3 in my computer. It began with one of them and has now spread to the rest of them.

  The problem occurs especially with my mouse. The mouse freezes and sometimes I hear the alarm which is generally issued when disconnected a device. Sometimes it restarts seconds later and sometimes I have to physically unplug my mouse and plug it back in to restart.

  The problem also occurred with other devices that is my Ipod.

  The problem could be related to lack of memory because it seems to me see more during the execution of the programs such as Photoshop, Illustrator, InDesign, Flash, etc., however I can't say that for sure.

  Can I reinstal the drivers for the USB ports? I tried reinstalling my driver of mouse, with no effect.

  Please note that I cannot go into 'Control panel' I get an error message and closes the window.

  I hope someone can help me.

  Best regards

  Green tentacle

  USB drivers are part of the Windows operating system. 3rd party USB drivers don t exist!
  What you could do is to disconnect all USB devices and could remove the USB ports/hubs/controllers in Device Manager.

  Reboot the laptop.
  After restarting again the operating system should recognize and install again the USB ports.
  This accelerated procedure should help you

• SQosmio G50 - 10 H - one of the usb ports stopped working

  Hello forum,.

  I have a BOUNCING problem with usb ports on my qosmio g50-10 h.
  There are two ports on the right side of the machine and I have 2 self-powered 7 centers of port (usb 2) attached to these.

  Every now and then to stop it from ports and of course all the parts a unregcognised, not found.
  I get error messages saying unregognised device or usb device stopped working or windows stopped device etc.

  Unplug the hub and repluging it ususally actually come back to life.

  any ideas?

  Stafford

  Hello

  Have you tried to connect devices directly to the USB port?
  Try this and see if the USB device is disconnected, as you mentioned that using the external USB hub.

  Generally speaking, it is difficult to say what might cause this
  You could try updating the chipset driver.
  Of course, you should also check the USB port settings, and power management options for economy.

  In device manager-> USB root & hub-> properties you could disable for unique energy saving USB ports.
  This also on Win 7 power management.

• For some reason any, that my printer has enough work and when I plug in my camera to download images, the computer says it does not recognize the USB port, which could be the pronblem?

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  When did this problem start? What did you change shortly before it all began?

  Please quote the exact text of the message you get, verbatim.

• the power cord of the ac for my iphone charger 6 will work in the USB port in the car for the load

  Looking for a car charger for my IPhone 6.  Wondering if the cable operator in the House will work in the USB port on a car?  It hurt my phone.

  Yes you can. As long as you have in the car's USB port. It can load more slowly then wall charger, but it works! I load mine in the car all the time