T500 Problems WWAN.

Similar Questions

• Partitioning in T500 problem

  Hello

  A week ago I received the new T500. I tried to divide the drive into 3 partitions and I managed to do it with GParted LiveCD. Windows XP worked fine after that. Then I did the BIOS update with ThinkVantage System Update. After that (I'm not sure it's because of the update of the BIOS) when I boot GParted, it shows that my drive is unallocated space, but windows starts normally...

  I wouldn't bother I have not the fact that I have to install Linux on my T500 and installer can't see none of my scores...

  What can I do to make it work correctly?

  I can even wipe my drive hard if you tell me it will work 100%...

  Finally I did it! Here's how I did it: I went to the BIOS changed options SATA AHCI Mode Compatybility. Then I had lunch the installer of Windows XP - whipe on all partitions, created new partitions using Windows install. After that, I have not had any problems with Acronis Disk Director, install linux on my t500 or any other problem. I hope it helps someone.

• Distortion of sound on T500 problems

  Hi all

  I had my T500 now for about 3 months and you have problems with the sound and crackling distortion. It is not obvious when you play, but loading Youtube videos, it is particularly evident. Maybe something to do with interference with the network card, I'm not sure.
  I've read that it could be a problem with the Intel ICH9M-E/M SATA AHCI controller, but I can't find the link again.
  Any suggestions before I have calling technical support?

  I just thought that Id mention a solution to the problem. Lenovo has recently updated the IDE ATA/ATAPI driver for Intel ICH9M/E/M SATA AHCI controller driver. This seems to solve this problem as a stuttering problem I had with my mouse I have ensure that was due to Razer drivers not Lenovo.

• Setting backlight T500 problem

  Hello world

  I got T500 2082bqg there ati3650 and intel4500 of two graphics cards, there are problems with the backligt layout when the laptop works from ati graphics card, when I switch to intel, there is no problem when I switch back to ati there is no problem too.

  broblem occurs when the laptop started from ati and when it has been suspended or hibernation on the ati graphics card.

  Lenovo's Poland was not me helped.

  Uninstall ATI Catalyst Control Center and integration Lenovo Hotkey. Restart (if he does not request the uninstall program), run CCleaner, then install the package Hotkey ATI switchable manually matrix driver T500, rather than by the system update.

• Resolution graphics ATI T500 problems

  I'm having a problem with the graphic part my switchable graphics ATI in my T500. I am using an external monitor and when I use the integrated graphics card intel 'energy saver' the monitor has no display what is on my laptop screen, and it can go to whatever resolution that my monitor is capable of. However, when I go to the ATI card it can go up to 1440 x 900 max resolution. In addition, the monitor only receive a signal when the laptop screen is open, and the laptop does not show anything. On the other hand, when the Intel card using my monitor displays even when the screen of the laptop is closed. When I try to open the Catalyst Control Center, I get the following error:

  "Could not load file or assembly ' CLI." Implementation, Version = 2.0.3524.37250, Culture = neutral, PublicKeyToken = 90ba9c70f846762e' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. ("Exception from HRESULT: 0 x 80131040")

  I use drivers that are available on the Lenovo support driver download page, I think the version is 8.752.4.0. I use this monitor for a long time with the previous version of the driver and it worked fine. He could even run with this version of the driver when I downloaded everything first, I don't recall (my VGA cable is dead some time ago and I just replaced it).

  I tried to re - download the ATI driver from Lenovo and re-installed page, but the problem persists. I am using Windows 7, 64-bit.

  Well, I have restored my drivers on an older version and the problem has been resolved. I think that the question should be examined in, however, because there may be some applications in the future where I need to update the video drivers.

• New T500 have WWAN modem?

  I bought t500 (2055 CTO model). Have T500 WWAN modem? In the Panel, I have in the Ericsson modem device, but Lenovo man said mi who never T500 have the modem. Is it true? It is possible that I don't have a WWAN modem even if I device in Control Panel?

  The Ericsson is the WWAN card to ATT/Cingular broadband service. So yes, your unit has WWAN.

  See you soon,.

  Mark

• T500 problems with system since the update system

  Hey guys, I hope you can help me sort my problem:

  Yesterday I did an update on my T500 system... after that I wanted to play a little GTA IV... usually I play on the graphic medium with about 28-30 FPS... after the update yesterday, I had 12 FPS...

  result of the update was a new power manager... new... new logins drivers Bluetooth... AND a new Module update for Vista

  Anyone of you have any ideas on WHY my system is suddenly so slow?

  I thought that maybe a Virus was on the right track... but then I installed my Antivir Premium and he did not find anything from now on...

  Well, I'm looking forward to your suggestions and I appreciate your efforts to help me; D

  Greetings

  Hi Robert,.

  I think you should both try to turn it off or put it to maximum performance.

  If the won´t of the situation changes, the last procedure would be a restoration of the system to a previous state of vista.

  If it s a vista update problem, google search gives some tips for updates vista and ati performance;

  Edtit: misspelling.

• X 200-problems WWAN

  I had a lot of problems after installing Windows 7 bits for a while ago.

  But I managed to do the work and it has been the work of fishing only.

  Yesterday, I got a weird error. When I turned it on it connected.

  But after 10 min. maximum it off it self!

  I tried many different angels. without any look )

  So now I need help...

  The solution was to reinstall the computer. I manage to editing all the drivers and install them again. The solution was to reinstall everything and helps

• XP Downgrade T500 problems

  Hello together,

  I tried to downgrade my T500 to Windows XP, but it didn't work.

  After a restart, Windows Vista startup dialog appears and end up with a blue screen.

  I did the downgrade via ThinkVantage key during the starting procedure.

  I took the original XP CD witch was delivered by Lenovo and the system restore worked fine.

  At the end of the restoration of the system I need to reboot the system but as I wrote the windows XP doesn't have a startup dialog appears.

  What can I do? Do I have to format the hard drive before doing the system restore?

  Greetings Andreas

  Hello

  Thanks for your help. The downgrade procedure is possible with the rescue and recovery cd. Not with the touch of tink vantage.

  Greetings,

• Problems WWAN T430 and AirPrime MC7700

  We have a fairly new T430 provided with Windows 7 64 bit and an internal AirPrime MC7700 aircard. When the user wants to switch from a wired Ethernet connection, it does not recognize the aircard map until after a reboot. At this time there, he works until he returns on the wired Ethernet connection again.

  In addition, it doesn't seem to cooperate with Sonicwall Global VPN Client. It hangs on "acquiring IP address.» He also wants the opportunity to create a phonebook entry when the customer is activated, which seems to be for a modem connection (we just cancel out of it and start over when that happens). The VPN client software works very well with its home wifi connection.

  Hi, tholyoak

  To ensure that they do not cause the issue, I recommend making sure that the drivers and BIOS are up-to-date. The latest BIOS for your machine was released January 17, 2013, so it is fairly new and can help. The update of the BIOS can be found hereand the rest of the drivers can be found here.

  It will be useful,

  Adam

• Installing the card WWAN on T500

  Has anyone he moved? I think make a (wwan upgreadable means that you say yourself right?

  There is a free pci-express slot on the left side of the laptop under the keyboard. If you T500 is wwan upgradeable, means that there wire antennas are there and the location of sim card reader is here.

• problem in T500 bios version

  Hello world! Update my bios with bios update utility to version 3.23, and my problems began. First my t500 began to enter the mode "sleep" at random, after registration to the event viewer, it is ahci code 13. Second problem is very strange, the display decreases intensity and brightness down more down, the laptop is in the sector and battery is ok, after 4-5 seconds, it goes to max brightness, can be power plans go wrong, I don't know. Third problem, it's a blue screen and after verification, the problem is with the wifi card. With previos version of the bios, I have no problem. My question is how to pass the version of the bios, or is it more recent than 3.23? My bios version is 3.23 (6fet93ww)

  Hello

  Older versions of BIOS are at the bottom of the page.

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-T-series-laptops/ThinkPad-T50...

  Z.

• T500 initialize the W10 64-bit problem

  I have a rather strange problem. Basically if I fresh start my T500, aka show etc. of a complete power off, the splash screen, but the display never passes the actual Windows OS 10. I can say the system is running and if I manually set the system sleep with FN + F4 and then put it out of the screen will be responsible for sleep. Not a terrible problem, but a slightly annoying extra step I have to do at each boot up.

  I haven't used this laptop for quite awhile and had done a completely fresh from the W10 - 64 bit installation when I decided that I needed as a notebook of basic work.

  Any ideas that might help with this would be greatly appreciated

  If you have switchable graphics, enter the BIOS setup and choose display. Set it ti discrete and disable switchable any graphics OS detection. Then let it win 10 install the video driver. This can take a few hours to win 10 to realize you've changed video card.

• Battery on T500 - unusual problem - not in the forum

  I have laptop T500 with a battery 6 cells. For some reason, the battery does not charge. The battery on the screen light blinks all the time. I changed the battery but the problem persists, and so I think that it is not the battery. I also checked with another adapter that I have and it's always the same thing. Anyone know how I can solve this problem.

  Thank you.

  If the problem persists with different battery, then it is likely that you have a problem with the motherboard. Flashing battery should mean that the battery is below 5% charge level.

• How to solve a serious problem with the Battary of my T500 laptop?

  Hi Forum,

  My laptop is Lenovo THINKPAD T500 2055, and its main features are the following:

  -T 39, 6651 SBB 9 CELL LI-ION BATTERY
  -Processor Intel Core 2 Duo T9400 (2.53 GHz, 1066 MHz, 6MBL2)
  -8 GB DDR3 SDRAM Memory Module 4 GB (2 x 4 GB) 1066 MHz DDR31066/PC38500 DDR3 SDRAM SoDIMM Kingston.
  -HDD 2 GB Intel Turbo Memory cache.
  -ATI Mobility Radeon 3650 with 256 MB.
  -160 GB of HDD, 7200 RPM.
  -Windows 7 complete edition with the latest Service Pack (x 64).

  My problem with precision and brevity is the Battary. I was using my laptop with the same battary since 01.01.2009 (almost 3.5 years), and the battary works quite OK.

  Most of the time, that my laptop is plugged and work with electricity. However, A very short time, I used the laptop while it is running on battery power, however, I used to empty the weeks of the dough from time to time, i.e. all 3, I unplug the charger and continue to use the laptop until I see the orange warning sign (5%), then, I connect again.

  Fortunately, I never had problems with the battary or the cell phone, and when I charge the laptop usually it shows sign full (100%).

  Suddenly three days ago my laptop starts to blink and the orange sign battary constantly in charge shows 100%. When I try to run on the battery by disconnecting the AC adapter, the laptop immediately loses its power and stops immediately.

  What do you do? Could you please give me useful tips to solve this problem?

  I'd be greatly and sincerely appreciate all of your entries!

  Thank you for your consideration of my request and I look forward to hearing from you soon!

  Replace the battery!