I want to make an image of the Pacific on several pages.

Similar Questions

• Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem

  Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem is it gets rid of color and shows that the peak through the text.  I wanted a draft of the text with the picture.  Is this possible?

  Thank you

  Peter

  You're welcome, Peter.

• I'm the sms screen and I want to make my application in the foreground, how

  I'm the sms screen and I want to make my application in the foreground, how

  I tried UIApplication.getApplication.requestForeground ();

  but he has not worked after me a possible solution

  Thanks in advance for any help / suggestion

  the doc of the API is pretty descrptive and the task is not very difficult, you should be able to do it yourself.

  code for a specific problem is usually not code example...

• How to adapt the rows in the table spans several pages in proportion to an image?

  Hi all

  I have a fairly large excel file (more than 2000 lines) imported, and the resulting table spans more than 150 pages.

  The problem is that the lines don't always fill the height of the text block (height of 9.5 ") on every page.

  I don't like that the lines are of different sizes. I want just the lower edges of tables on each page to be in the same place.

  By dragging the line down with the SHIFT key does not work if the table spans several pages/text blocks.

  Is it possible to force the selected lines (or stored in a block of text) proportionally fill their block of text?

  It is really not any function automatic adjustment that apply at the height of the row in the table directly, then I suspect that you're not going to find a way to do this is automatic.

  If it was my document, I would consider (something like) do this:

  Find the highest line in the table. (Or, perhaps that if there is some exceptionally high lines; unobtrusively manipulate them and use the 2nd or 3rd highest line as a reference.) Calculate the number of lines (max number of) of this size will fit in each text block. Divide the height of the block of text by this number to get a line height that adapts the same number of lines in each image. Then, select the entire table and all rows from this height. Follow up with the typographic settings that help uniform line height look resolutely.

• I want to make a CD with the picture of my brother in the order of his life.

  My brother just died. I want to make a cd of photos of him in the order when he was a baby, and through his life. I have created a folder for this and entered the order the photos I wish, but as I put the pictures in, file fix them out of use. How to display in the order and also to go on the cd and to display in the order?

  It seems that this could be the right answer. The only question I have is that several times I tried to rename the files and a message came to say he could make my unstable file, so I've renamed never all., because I didn't want to spoil my pictures.

  In addition, can I keep the image names and add numbers before or after the title... I'll make the cd for other people to view, and it will cover a period of 70 years. I wish that people who consult to understand on what date, and perhaps where they were taken.

  Thank you for your information, I appreciate it

  =======================================================
  The dialog box that you received when you rename was probably something like...

  "If you change the file name extension may become unusable.

  "Are you sure you want to change it?

  This dialog box if you are unable to keep the file extension that indicates
  the format of the file. For example. JPG and even if rename you it with a.
  the extension you could replace it and the file would be nice.

  If you do not see the file extensions on your file names... you can go
  TO... Button start / Control Panel / folder Options / View tab and Clear
  (uncheck)..., the checkbox "Hide extensions of known file types" / apply / OK.

  If you have reservations about your photos, that it may be interesting to try
  create a copy of the file of the photo to experiment project. So if
  you are not happy with the result rename you can just delete it
  and while maintaining the current photo project folder.

  As for retaining the current file names. Yes, you can keep them if you
  numbers of the photos manually and place the first number. Do not close the
  file once you have manually converted files or they will come back
  for the original order. After that your numbering is done... they will remain in
  order.

  As follows:

  10001 dinner with friends.jpg
  10002 to the beach.jpg
  Picnic 10003 time.jpg
  10004 ocean waves.jpg

  Good luck...

• As a person in the main video takes the floor, I want to insert an image, while the audio stays...

  I have one main video where a woman takes the floor. In his speech, I would like to continue talking while using different images that makes her disappear, but not the audio... How do I with IMovie on my IPhone?

  See iMovie for iOS (iPhone, iPod touch): organize audio clips. You should be able to detach the original clip audio but keep them lined up, allowing you to adjust the video and then move on to still images while the audio continues to play.

  TT2

• HP 15: cannot make an image of the system

  I have a laptop HP 15. At 8.1 Windows installed 10 Windows, everything works fine until I try to create a system image. When I click to start it says create Windows 7 system image then fails to 97%. Two questions why Windows 7 and why failing.

  Thanks for any help.

  I use imaging system Windows 10. Open Control Panel, under system & sercurity open backup and restore (this is where Windows 7 is mentioned for the first time), when it opens in the upper left corner you can create system images and a system repair disc. I've done both for Windows 8.1, I used this method with visited 7 & 8.1 without problems so far.

  I ran test on all players and all is good.

  Maybe I should explain why to use to create the system image in Windows. With HP Recovery, what is copied is disks and files to get Windows to start. With system image, that your hard drive internal all is copied, it is BONE, all drives, files, updates and any software that you have installed even saves bookmarks. If your internal hard drive fails, simply install your drive with the image of the system and you're ready to go back just like before. I used this method to get laptops in use in very short time.

  I solved the problem of a backup with Macrium Reflect disk to clone my internal hard drive. It's ok but the Windows image is much easier to use, that's why I love it and recommend it to friends to use it. You do not need to be an expert, just a couple of clicks and windows does the rest.

  Thanks for all the help and suggestions. I still want to resolve questions about the reasons Windows 7 instead of 8.1 and why keeps hanging.

• Granted refurbished Sansa, want to make sure it's the rocket

  I got a refurbished Sansa and I'm sure it's a rocket, but I guess I should check 90%. BE0805AVUK-2 GB numbers are on the back and the firmware is listed as V01.02.28A. is this enough information to know if it's a rocket?

  I want to make sure before buying a Micro SDHC card, because the rockets are compatible, but this thing is says Micro SD through the slit in the card.

  Looks like it's probably a rocket (from the version of the firmware), but why not just look at the pictures in the sansa store?

• How can I make my image on the screen is adjusted to match the size of the screen? __

  I want my police right to adapt to the size of the screen to the right

  Malkeleah wrote:
  > Your post is pretty light on details, so I can only give you General
  > advice. Choose what is applicable to your situation or post back with more
  > information on your system and its problems.
  >
  > 1. Make sure you use the correct resolution for your monitor. If
  > you have a monitor LCD (flat screen), using its native resolution. Refer
  > to monitor (or laptop) manual to find out what it is or, if it is a
  a single monitor, Google, using a native keyword like "make and model".
  ' > resolution.
  >
  > Control Panel > display > settings - move the cursor to the right
  > resolution, apply/OK outside.
  >
  > 2. If the resolution is already correct and you have a LCD screen
  > monitor, use the button on the monitor to adjust automatically. If
  > you have an old CRT monitor and the resolution is already
  > properly, use the buttons on the monitor to adjust the screen display
  > area according to the needs.
  >
  > 3. If you have a laptop and #1 and #2 are not applicable, reinstall your
  > video card drivers. Find them in the computer tech support site portable mftr.
  > for your specific model laptop.
  > ------------------------------------------------------------------------
  > MS - MVP - Elephant Boy computers - don't panic!

  Another thing that should be checked is to ensure that the DPI is
  Set 96 instead of another value. Control panel - display-
  Settings, then the button advanced - general tab is where looking for.

  --

  Smith y
  Windows XP Pro SP3

• How to make an image using the camera on my pc

  I want to take a picture of my laptop but cannot find the button

  Hi carolewyne

   

  1. What are the brand and model of the laptop?

  2. you have software installed for the camera to use?

   

  If you want to take a photo using the camera in the phone, then maybe you should use a utility support for the device that is provided by the manufacturer. It will help you get the image using the camera. You can visit the manufacturer's Web site and download the software for the device is functioning correctly.

   

  I hope this helps.

• I want to create an image of the browser for my site in Muse

  I want to create an image or some sort of file to the browser in the Muse who will fill the whole browser, screen, without losing quality when it is used as the fill for the browser and will not slow down is the site of Muse, I am trying to build.

  I use the basic dimensions which has a Muse to open a new file, which I believe is 960 width and height 500, but I could finish by using a width and a height, but for now I'm just starting with the height and width of base.

  1. What is the best way to do it?

  2 should. What size, dimensions, I use?

  3 should. the number of pixels per inch I use?

  I want the image to the black start and quickly fade in blue in the Center, leaving the sizable part of the blue Center, in a circle.

  How can I do this?

  If there is a way to do this in Muse without having to create an image, I would like to know how.

  Hey noelb8402969,

  Here are a few points to answer your question

  (1) - to fill the full browser with a photo - you can use this image browser fill.

  (2) - the quality of the image will remain the same, will not be carried out is not stretched.

  (3) - If you put a strong image browser will certainly be respected take time to load.

  And -I want the image to the black start and quickly fade in blue in the Center, leaving the sizable part of the blue Center, in a circle

  S ' Please create animation in Flash pro or edge animate and import it into the Muse.

  Kind regards

  Nitin

• Images imported into my Stadium go up as white and make each image before the image of thugs imported as red squares that fill the perimeters of the image which then renders the publication and test scene has useless Flash, what can I do

  I worked on the animation of a scene in flash for a few weeks and recently I met a problem with the import of my images to the stage where images I have import increase, however, the keyframe I tried to import the image to watch that it is occupied by an image and each image before the image key that just imported a picture that doesn't show shows up as a red square that fills the perimeters original of the image , there is no solution to this problem all where on the forum and the personal adobe technical support does not help me find a solution to this problem, what can I do to get Flash working normally again and fix this?

  After the first time that I publish a preview after I start using the flash, flash makes the publication and the test scene features as useless and claims he has not found an HTML template, or if the images if I import all the images on the stage who empties and display each image before the image as a red square and then try to publish a flash preview renders also the publication and the scene features test as useless and claims he has found none of HTML template. What can I do to fix this? There is no solution on the web anywhere to this problem either.

  I discovered the problem, I just need to get a Z820 with a Nvidia Quadro K6000 graphics card and a new Flash Professional subscription, I'm lucky, I did what I did. Thank you!

• Header image causes the displacement when loading pages

  I built a project with a size of header 215px on only one master and placed a box of 'Wide' with a ladder to the fill picture, with my logo and the navigation Menu I want to expand on all pages of the Web site.  When I move from page to page, the menu bar and body of text temporarily transfer and then down again made the transition from one page to another very clumsy looking and have a nice static header between pages.  If I remove the header image this behavior disappears, but given that it is a standard feature of Muse and is covered in the first tutorial of training Katie coffee, I guess it should work more smoothly.  As a side note, I went back to the site of the Katie coffee I built with instructional video and noticed that this behavior also occurs on the homepage of this site, so therefore it doesn't seem to be specific to the design of my site.

  Given that I put a header size on my master, at least, I think the position of the page body to stay consistent with this, even if there were changes in the header box?

  Please change the fill to fit and then check, in addition to publish the site to the live page as the browser view probably will not show the same question.

  Thank you

  Sanjit

• How can I remove the image of the mouse on a page scrolls in captivate 6

  Hi all

  (Captivate 6)

  
  

  I have a few pages where I had to scroll when capturing a video. I want to remove the images of the scroll mouse. I see that it is bound to a fullmotion.swf file in properties but I don't know how

  to delete the image.

  What I tried:

  1. replace the frame-by-frame empty mouse

  -bad result that audio button

  Does anyone have any ideas?

  I hope that I don't have to have a new video capture him and import it I have audio attached to it and do not know how to divide the audio and video, if it's the answer can you tell me how to split audio and video? If you have an easier solution, I'd love to hear it

  Thanks for the help

  Eddy

  Too bad. Resolved to my answer.

  1. my solution

  a. change the background at bottom even using a motion.flv no, worked like a charm with even

  audio

  Happy!

• Set an image as the background of a page

  Hello!!
  
  Someone knows how to set an image stored on the file system as a background image of a HTML page?
  
  Pedro.

  Hi Pedro,

  Use the parameter "Attribute of Page HTML Body" on the page and enter something like:

  style="background:url(#IMAGE_PREFIX#filename.gif) no-repeat center center"
  

  This adds a style attribute to the page's BODY tag.

  Andy