As a person in the main video takes the floor, I want to insert an image, while the audio stays...

Similar Questions

• When I insert an image in the sequence. the photo that it is expanded

  I am currently using Adobe PREMIERE PRO CS6. And I'm doing a video for school. I tried to insert an image of the main sequence. but the image were bigger so big that only part of the picture is visible. This is because the size of the image were too big. How can I solve this problem. same thing with the video, when I insert the video, the video was really small. and with a black space around it. I change the size of the screen adjustment of 100%, but the resolution of the video no longer so clear. I tried to do the same with the image, such as change the adjustment to certain % screen size. but it does nothing. the image remains on this certain task was be amplified. and if I spend 20%, only got smaller image with black spaces around it. How can I solve this problem. I do the video for school so it is really important that I get this fixed a problem.

  Smilyfrowned wrote:

  Thank you very much. I did what you said and it worked. Is there a more effective way instead of scaling? as the photo would automatically put the scale itself

  Put scale by default to fit the size of the image in the preferences, its general slot.

  If nature does not have the same proportions that the sequence you will have small black highlight and then you will always have to scale.

• Insertion of the stills of DSLR in a mainly video project puts the stills in the video area leaving the video still visible on each side in the background - hints on how to fill the frame completely?

  Inserting still images on a mainly video project causes the video still visible to the left and to the right in the background. What I am doing wrong?

  iansilver

  What version of Premiere Elements and what operating system is involved?

  Can I assume that the stills are on Video 2 video 1 video above?

  If this is the case, place the indicator of the timeline on the still, click on the still image in the editing area monitor to display the bounding box of the image.

  Then use one of the handles of the bounding box to scale the image to fill the monitor space just at the point where the image below is not seen.

  What is your predefined project?

  What are the properties of your source media? And, did you, yourself or the project define the project preset to match the properties of the media source?

  What are the dimensions in pixels of these photos that you import into the project?

  What effect you are trying to create with these stills? Just in case message... the content on the top rail will be visible and content on a lower rail just below it will not be unless there are areas of transparency within the content of the upper track. If there are areas of transparency within the content of the upper track, then the lower content of track appear across these areas. Looks like what happens for you. In addition, Premiere Elements represents transparency as black, not black.

  Please review and study and explain what your goal edition is here. For questions about the questions or the comments above, feel free to ask.

  Thank you.

  RTA

• Error Blu - ray: 'invalid operation', Code: "19", note: "attributes main video stream must be compatible with the playList.

  Hello

  I can't create a Blu - ray folder or Blu‑ray Image with my project.  Whenever I click on Build, I get this error:

  Purpose of Blu - ray: "< timeline > Untitled chronology", error: "invalid operation", Code: "19", note: "attributes of the main video stream must be compatible with the playList.

  I created my .m4v file and .wav files in Adobe Media Encoder using the H.264 Blu - ray built-in HDTV 1080 p 23.976 high quality.  I also tried to create several variants (encoded Dolby Digital audio, tried the HDTV 1080 p 24 high quality preset).  No matter what I still get the same error above.

  I only have a basic (no movement) menu, but I tried to remove it and still get the error.

  Still isn't my files and I want to keep it this way if possible and use the best rendering of SOUL of transcoding capabilities.  The only change I make for the presets of SOUL must enable VBR 2-pass and use maximum render quality.  Who should not cause the issue?

  I searched the forums and did not find anything.  Someone suggested to restart yet, but that did not help.

  Any suggestions?

  Thank you

  Graham

  I finally got the Blu - ray folder created.  I imported my original uncompressed AVI again and let the transcoding.

  So, the moral of this story is that still did not like the pre-transcoded from Adobe Media Encoder files.  Your suggestion on the audio being a slightly different length as the video could be a possible cause, if SOUL actually creates files with this problem.

• Videos like AOL, start to play, then the video blanks out and the audio continues. If I run Firefox in 'Safe' Mode, it works. Disabling plug-ins does not work

  TED talks, videos, AOL and others will start with a flash of the video, then off. The audio continues. I deleted the plugins flash and quicktime - no luck. I restarted Firefox in safe mode and it works fine. I then rebooted and disabled all the plugins - no luck. Internet Explorer works fine.
  Any ideas?

  One of the characteristics of Safe Mode is that it disables use of Firefox hardware acceleration of graphics. This method works around incompatibilities with some graphics driver software.

  the button Firefox orange (or the Tools menu) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  It takes effect after you quit and then restart Firefox.

• Windows/Windows Live Movie Maker no video black screen. but with the audio and subtitles...

  I made a movie in windows live Director and windows movie maker in windows live movie maker, he's playing very well and I've registered as a project and a movie (on my computer), but as soon as I opened in windows movie maker, windows MediaPlayer, youtube or anywhere else, half of the video goes to a black screen. I had all the audio and subtitles, ect for the first minutes of my film no photo or video. I tried to convert the file type, I tried to burn to a disc, then I just gave up and he made once again. still the same problem... Please help? :(* Le fichier EST àle format WMV et je l'ai ai copié et converti en autres formats et juste le même problème à nouveau... quelqu'un peut_il s'il vous PLAÎT m'aider?) its for a project, my friends and I are trying to do and we spent 5 weeks of filming and editing just to be confronted with a problem end:(, je serai vraiment reconnaissante à toute personne si ils peuvent m'aider à résoudre ce problème)

  Hello

  The question you have posted is related to Windows live and will be well suited in the Windows live forum. Click on the link below.

  Windows Live Solution Center

  http://www.windowslivehelp.com/product.aspx?ProductID=5

• When answer us e-mail, punctuation change another channel of the alphabet, when the other person receives the message.

  When answer us e-mail, punctuation change another channel of the alphabet, when the other person receives the message.

  When they reply to the message, foreign brands are repeated to us. I find no access in the program to fix this problem.

  original title: problem with punctuation

  Guessing that you use Windows Live Mail 2011, take a look at this page: Why do I see strange characters in messages? It can explain your situation and offer solutions.

  Noel

• I am trying to download an application on my cable company, but it won't be over because my computer 'administrator' will not allow him. How to solve this. I'm the only person using the computer.

  I am trying to download an application on my cable company, but it won't be over because my computer 'administrator' will not allow him. How to solve this. I'm the only person using the computer.

  Start > run > control userpasswords2 > OK

  will take you to what you need to access and change permissions for logon not required

  On the users tab uncheck users must enter a user name and password to use this computer

  other options are available to facilitate access

  If a default administrator password has been entered it would probably be adminpass or empty field

  In both cases, it would be entered twice or white field, then move the cursor to confirm the blank

  as non-existent password then confirm white... you see an empty field is itself a password.

• some parts of the audio of the video do not play on all devices

  I recently exported a video in first pro through media encoder.  It played fine on my computer.  The video begins with a bumper with audio and then goes to a speaking spokesperson.  I then downloaded on youtube and yet once again, everything was going well for me.  But then I heard from a colleague that he could hear the audio during the bumper, but once the person got on the screen he had no audio data.  I've never run into something like this before.  I went to check and found that if I watched the video on firefox, it worked but not through google chrome (though chrome worked for me).  I thought it was a weird extension or something that she had installed that might have been originally it and don't worry.  Hey well last night our posted the video on facebook and youtube social media person arrived again reports the same behavior but this time it was on several aircraft types.

  I used the 1080 p vimeo export preset in media encoding.  Everyone has faced something like this before?  This is the first time for me and just baffles me.  I think that if we could hear the intro music you should hear all audio - it's all an audio track.  But I guess I'm wrong?

  I found the problem.  It turns out that it was a problem of phase cancellation.  When the audio has been converted to a stereo left mono signal and tracks right were to cancel each other.

• How to remove the person behind the subject's hair

  Hello world

  Can someone give advice on how I could remove the person in the background behind the hair in this picture.

  I was able to get quite close by completely removing his head & hair (see second photo for my best try) using edge mask tool refine, but I feel there must be way to make this look much better.

  I've been Googling trying to find different ways to do this and come across various options I've tried, but nothing he gets professional-looking, I hope.

  Anyone has any advice on how to change the background person without damaging the foreground object and his hair?

  Any advice would be much appreciated.

  Thanks in advance

  

  

  Hello

  The key to this is a high quality of the baby mask. You probably already know that hiding details of beautiful hair is quite difficult, and in this case is crucial because the hair is at the center of the image. I posted what I did below. If you look at it full size, rather in the preview, you can see most of the details of hair gets deductions. The procedure is complicated to explain in detail, but you must learn to use channels to make masks. In this case, the Red layer had good contrast between the background and the baby. Essentially, you use levels or curves to darken the background and clear up the baby. I can't pretend that it is easy to clean the original grayscale mask. You need to use the dodging and burning and understand how to use the paint mode of overlay to delete the semi-transparent pixels, but its more a matter of being patient and learning the techniques rather than to be a fantastic artist. Once you have done this, you can use refine edge or improve the mask to make it better, but even then the hairs will be always missing - they took after that you treated the person in the background.

  So in the background, that's how I approached it. When the hidden child, you have actually the child isolated on its own layer, so you can literally just not erase any trace of the person in the background using the Eraser tool. This will create holes in the bottom that needs to be filled. You can try the cloning in the spaces, but I have a selection of areas of the existing background with the same color and texture of the area to be patched and copy the selection into a new layer. You can then use the tool of transformation to rotate and selection to adapt to the scale. Finally, you put a black layer on the layer mask and physically paint on the mask with a light and soft white brush. You will find that it will mix not perfectly, but if you apply a Gaussian blur to the image, not the mask he will mix.

  Finally, treat you every hair on the baby's head. You need only worry the hair where was the person in the background. In the image below the fine hairs on the left comes from the image original because the person behind doesn't interfere with that, but the hair in the Middle didn't need to be specially created a mask fine details. What I mean by that is a small mask made especially for this small part of the image and for that I used the range of colors, refined to the edge, copied into a new layer and applied a black layer mask. As most of the background of this small secondary image is black, you can use the layer screen mode as it ignores black. Once you have done this, you can just paint the details of fine hair on the image. I took the liberty of removing the color cast, but appreciate you might intend to keep it for artistic effect.

  All in all quite complicated if you want a reasonably photo-realistic effect. It took me about 30 minutes to do this, but I did a lot before masking. If you are fairly new to Photoshop, it will probably take longer. Unfortunately, she does take on some of the more complex aspects of the program, but as I said takes a little learning but is not rocket science to do ultimately.

  Hope that helps a bit

  Terri

  

• Unlink the Audio and video in gray in the first 13 items (Windows 8.1) [new user]

  I posted (or at least I thought the post worked) this Mar.27th question, but I can not find it or that the answers I have gotten so if anyone knows his comings and goings, I would appreciate you tell me how to see while I have 2 threads running for the same question. My question is: why is the ability to separate audio and video tracks greyed when I am trying to replace the part of an audio clip (without ruining the synchronization between audio and video existing). I work with a saved file "projectX.prel". I noticed when I opened a new project that the option to break the LINK is active. This seems contrary logic is to say action to break the link would be more likely to be needed when you are working on an existing file as opposed to when you are working on a new file? How can we separate the 2 components (audio & video) so I can just edit the audio clip without the work of procedure to break the LINK? Would appreciate any help anyone can offer with the foregoing. Thank you.

  garryw

  First broadcast 13 elements 8.1 on windows 64-bit. Have you updated to the 13 to 13.1 yet? If this isn't the case, please do so using Help Menu/updates to date of an open project.

  But for the immediate question...

  I don't see any sign of a previous post you so I'm not sure what happened to your prior shipment.

  When you import a file that contains the video and audio, they come into Premiere Elements project related - party video presenting the

  Video of track 1 and the audio portion on the Audio 1 track.

  If you want to unlink the audio of the video

  a. Select/highlight the chronology of the record and go to video Menu/unlink Audio and video and click it. It does not work.

  or

  b. right click on the file of chronology, and in the drop-down menu, find and click on remove the Audio and video link.

  or

  c. hold down the ALT of the main keyboard to the computer and click drag the audio from the video.

  Please consult the bulletin and review, and then let us know the result.

  If any questions or need any clarification, do not hesitate to ask.

  Thank you.

  RTA

• Video accelerates when they are imported, but the audio is normal at PE7

  I ripped a DVD on my computer. It's in a format default VOB from DVD Shrink. I don't know if I can change the format and I don't know if it would help. It is not be compressed in DVD Shrink, so I don't think that's the problem. I open the VOB file in PE7 and it's as if the video is on fast forward, but the audio is at a normal pace. If I try to open the file in PE3, the video is jittery and jumps autour, but the video is not faster than the audio.

  The pace in PE7 is 29.something, whatever it is to normally. I thought it was DVD Shrink causing the problems, but I tried both DVD Decrypter and got the same results. Any ideas on how to make video slow?

  Sorry in advance if someone has asked this already and I just failed to find. I just upgraded to PE7 and it has been giving me problems throughout the weekend. I'm a fool when it comes to technical stuff of video, so I can't have any idea what you are talking about if you try to tell me how to solve this problem.

  You can take a look at this THREAD, down near the bottom. ATR has given a recommendation for software work with the poster. VOB files and it worked fine.

  Regarding DVD-video software players, WMP has ability to delete some versions back. I heard it was just for the serious but DVD I do not use it, so I don't know. I heard there are plug-ins available, but have no experience. I use CyberLink PowerDVD and am very happy. Media Player Classic HomeCinema edition is also highly recommended, and it's free.

  Good luck

  Hunt

• The audio of the main dialog box on Game of Thrones is de-energized

  The audio of the main dialog box on Game of Thrones won after ten minutes two weeks in a row. We can still hear background noise.

  try going into the settings and if surround sound is set to on

  If a set audio to surround and no surround configuration is connected then what you describe is 100% what happens

  99% of dialog box is sent to the center speaker, which, on a stereo speaker configuration is missing because 2 stereo speakers are treated as front left and before there where only background sound plays

• HP Omen: Netflix main video content is not displayed on an external device

  My new HP omen plays the fine content on the screen of my laptop but when I connect it to a TV with a HDMI cable I get the audio and subtitles on TV but no video.

  tried this time by the app and the Web page.

  Hi @KhunRay,

  Welcome to the HP Forum! I'm happy that you've become a member of the HP Forum. It's such a wonderful site to find answers and advice. Here is a link to guide you to what the most rewarding experience and answer questions about the display: first time here? Learn how Post and more what is your specific model of omen?  Computers laptops HP - how can I find my model number, serial number or product?

  I understand that you have connected to a TV via HDMI, and you get the audio and subtitles, but no video. Here are some links that I hope will help.

  HP Notebook PC - connection of a monitor, projector or TV (Windows, 10, 8)

  HP Notebook PC - troubleshooting screen HDMI and sound problems

  Please let me know the results.

  Please let me know if that solves the problem by marking this post as 'Accept as Solution'. "To simply say thank you, click on the" ","inch Up ' below!   If you need more assistance let me know and I will gladly do everything I can to help.

• When I stop a video on any site, the audio continues to play for a few seconds.

  I press the button pause on sites such as youtube and vimeo videos. The video stops but the audio keeps going. There is also a similar delay when kind that enter or exit full-screen.

  Not that I know of.

  You have lots of tabs open, or other tabs that have active content?

  It happens that one tab opened with a video player?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode