I want to run 5 different winamps and servers shoutcast on a workstation

Similar Questions

• L7590 want to run 2 different computers wireless

  I have an of L7590 all-in-One printer and I want to run it wireless.  I have an old Dell computer with Windows XP that use my children in an area of the office and I just bought a new Dell with Windows 7.  I've always had the printer directly connected to the XP computer.  Now, I need two computers to access the printer.  Is it possible to make this printer works wirelessly?  We have AT & T Uverse with a wireless network.  What should I do to make this work?

  Thanks in advance,

  Mick

  Well Yes, scanning and fax.

• Make sure the disk is running whenever I start, and although I can access the internet, I can't open any websites.

  Control of disk runs whenever I starts and then displays windows so I guess it solves the problem, but I can't open any websites, even if I get to the internet.  I got my connection verified by my internet provider and I had my system examined by the technical service of my provider of virus & protection all to nothing does not.   Where can I find the results of analysis of disk verification?  It basically says the disc must be check for compatibility, but at the end of the analysis, it publishes results for just a second.  Too fast to read.

  It is good - now you know what the problem is and why XP prevents running chkdsk (he's trying to help you!).

  Here is a link to the article from Microsoft KB on the XP Recovery Console:
  http://support.Microsoft.com/kb/307654

  You do not need 'install', you will have to 'use' then go to the section 'how to use the Recovery Console.  Save installation if for another day.

  After step 4, you should be at the command prompt in the folder c:\windows.

  If anything it of a little weird or don't look right, or you don't get it, stop and you can make a CD of bootable XP Recovery Console and use it.

  Don't forget: you can't question the bit of impurity of the Recovery Console.  When the chkdsk /r is running clean (it may take more than one pass), reboot and see if chkdsk wants to run again or not, and then query the dirty bit again if you don't know what it is in the State.  The volume must be "not dirty" or chkdsk will want to turn on every restart, until it is.

  Once in the Recovery Console, follow these steps:

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• I want to run a SWF in several screens, is - it possible a .swf can divided into different part and meet

  I have a flash file, I want to split application in 4 different part and individually run on 4 different screens (monitors o/p). If this is then can not possible I develop 4 rows of 4 different screens, but how they can jointly associated with one application.

  I have the application developed in Adobe Flash CC but no problem to switch technology. Please suggest...

  Thank you

  Maury

  Yes, you should be able to do it with a bit of CODE.

  Apply a transformation scene (scaleX = 2, scaleY = 2) and change the x / y position corresponding to higher positions left, upper right, lower left, lower right.

  The export of 4 different sovereign such as each of them show only a quarter of the original film after processing and implementation in different points of view.

• I want to run ams 4.3 on my laptop and it says end abnormal program, what could be the cause

  After you have installed ams.4.3 on my laptop if I want to run it, it says end abnormal program, what could be the cause

  Hello

  1. what operating system do you use?
  2. have you checked if this program is compatible with your operating system?
  3. What is the full and exact error message?

  Please answer these questions that might help us helping you better. If you use windows 7 or vista you can try to install this program in compatibility mode and check.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

• I have an internal modem on my pc that is running windows server 2008, and I want to make a connection. Not a connection to an Internet service provider

  Hello

  I have an internal modem on my pc that is running windows server 2008, and I want to make a connection. Not a connection to an ISP, but to a mac. I want to transfer data via phone ports, have two computers without being connected to the outside world.

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• You want to run the software RAID (more precisely 5) included with Windows Vista Home Premium. Do you know where I can find documentation and how - in?

  You want to run the software RAID (more precisely 5) included with Windows Vista Home Premium.  Do you know where I can find documentation and how - in?

  Hello

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
  Please post your question in the below link:
  http://social.technet.Microsoft.com/forums/en/IECs/threads

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• So I have an old Alienware PC running XP 32 bit and I want to get Windows 7.

  So I have an old alienware pc running 32 bit XP and I want to get windows 7.    I was watching the upgrade version, but I'm probably going to be upgrading the mother/cpu/ram card when Ivybridge comes out.  I can do this or do I have the full version of 7?

  I recommend buying a genuine 'Full Retail Version' edition of Windows 7.

• All .exe files go to the Download Manager and ask if you want to run or save

  Suddenly my pc win 7 cannot run .exe files.  When it starts, I get several windows asking me if I want to run or save each of the boot files.  When I click on an icon for an application, I get the same thing.  If I click on for example a Word document file, Word opens very well, but I can't not all .exe files to run directly.  Even if I go to the Task Manager and click on "new task" and try and invoke Notepad - for example "do you want to run or save.  Even if I go to the control panel and ask search and solve problems - "do you want to run or save rundll32.exe"... Ditto for chkdsk and even for antivirus scanners or malicious software.  All the solutions I can find here seem to imply somehow running a .exe program to diagnose / fix and that's exactly what I can't do.  If you click on "run" in the download dialog there is an attempt to open a window, and then you're right to "do you want to run or save" the same .exe program.  Programs that save files still work all their saved files, it seems a simpler problem rather than a massive corruption.  Yet Labour Office associations, such as the 'open with' for example image files.  Any ideas before you give up and reinstall Windows?  Thank you very much!

  Any ideas before you give up and reinstall Windows?

  -> A a more effective and less painful method would go like this:

  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Select an administrator account, and then enter its password.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.

• I wanted to install the trial version of indesign creative cloud cc. and sucsessfull. but when I want to run the program it just a massage of error: Error 11. I tried many things on aldready support center, but there is no s

  I wanted to install the trial version of indesign creative cloud cc. and sucsessfull. but when I want to run the program it just a massage of error: Error 11. I tried a lot about aldready support center, but there is no solution. Can you help me?

  Hi Ninat43034799,

  Please uninstall InDesign CC to your machine using the cleaning tool: use of the Adobe Creative Cloud cleaning tool to solve installation problems

  After that, reinstall the product of your creative cloud desktop application.

  Let us know if this was helpful, waiting for your response.

• Running the Single Instance and RAC on the same server of different homes.

  Hi guys,.

  I already have 4 node RAC12c installed on OLE 6.

  I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.

  Please correct me here if I am wrong...

  My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.

  Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.

  Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?

  2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?

  Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.

  K

  Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.

  See you soon,.
  Brian

• Cannot open the lightroom catalog called "Lightroom Catalog" because it's too new to be used by this version of Lightroom.  You want to select a different catalog?  This is the message when I first click on LR and I have no idea what do to m

  Cannot open the lightroom catalog called "Lightroom Catalog" because it's too new to be used by this version of Lightroom.  You want to select a different catalog?  This is the message when I first click on LR and I have no idea

  Hi steves

  This means that you try to open a catalog from Lightroom CC/6 in an earlier version of Lightroom

  What version of Lightroom you have installed?

  Concerning

  Assani

• I want to open two different pdf documents and view them at the same time so I can read about everything by watching the other document.  I use Acrobat DC and whenever I open a document it creates a tab and I can only examine a document at a time.

  I want to open two different pdf documents and view them at the same time so I can read a whole watching the other document.  I use Acrobat DC and whenever I open a document, it creates a tab and I can only examine a document at a time. Is it possible to display two or more documents without having to toggle tabs?

  Don't think that will work, but you can drag the tab to a new window. Each window can have a set of tabs.

• I just bought a new IMac and want to run my old version of Dreamweaver CC3 on that, but I'm getting this quickly, "to open Dreamweaver, you must install the runtime Java SE6 strives".  How can I do this?

  I just bought a new IMac and want to run my old version of Dreamweaver CC3 on that, but I'm getting this quickly, "to open Dreamweaver, you must install the runtime Java SE6 strives".  How can I do this?

  Download it here: Java for OS X 2015-001

• Hi, I use an old PC which is running only Windows Vista, I want to uninstall Microsoft Security Essentials and Windows Defender.

  Hello

  I have an old PC which only works Windows Vista Home Premium with SP 2.  Now I want to uninstall Microsoft Security Essentials and Windows Defender from my pc. Can you please tell me how to do it safely?

  Kind regards

  James

  Hello

  I have an old PC which only works Windows Vista Home Premium with SP 2.  Now I want to uninstall Microsoft Security Essentials and Windows Defender from my pc. Can you please tell me how to do it safely?

  Kind regards

  James

  ================================================
  The following links might offer something useful:

  (2483120) how to manually uninstall Microsoft
  Security Essentials 2.0.1963 if you cannot uninstall
  it using Add / Remove programs
  http://support.Microsoft.com/kb/2483120

  How disable (remove and uninstall) Windows Defender in Vista
  http://www.mydigitallife.info/how-to-disable-remove-and-uninstall-Windows-Defender-in-Vista/