I want to run daguech Pro (a word processor/English) on Windows 7. However, the program was never updated for Windows 7.

Similar Questions

• I CS5.5 Master Collection and you want to transfer to a new laptop.  The CS5.5 was an update for CS3 Design standard and I have all the disks and serial numbers.  I just uninstall both programs a laptop and install them on the other?

  I CS5.5 Master Collection and you want to transfer to a new laptop.  The CS5.5 was an update for CS3 Design standard and I have all the disks and serial numbers.  I just uninstall both programs a laptop and install them on the other?

  You can do it, but you don't have to install cs3 in order to install your upgrade of cs5.5.

  You can launch the installation of cs5.5 and you will be asked your cs5.5 serial number.  Setup will ask you then select the product (in a drop-down list) calling.  Select cs3 and you will be prompted for the serial number for cs3.

  Enter the correct number at the right time and to proceed with the installation.

  If you no longer need these programs on your old laptop, disable (help > deactivate) before uninstalling so that you can keep your two activations.

• Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

  Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

  Miguelo28272279 for more information on how to solve the connection error preventing your membership to authorize please see sign, activation or connection errors. CS5.5 and later, Acrobat DC.  We invite you to update this discussion if you have any questions about the steps listed in the document.

• I want to run ams 4.3 on my laptop and it says end abnormal program, what could be the cause

  After you have installed ams.4.3 on my laptop if I want to run it, it says end abnormal program, what could be the cause

  Hello

  1. what operating system do you use?
  2. have you checked if this program is compatible with your operating system?
  3. What is the full and exact error message?

  Please answer these questions that might help us helping you better. If you use windows 7 or vista you can try to install this program in compatibility mode and check.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

• The unwanted invite repetitive: a program that is running on this computer tries to display a message to alert the program path: C:\Windows\system32\MsiExec.exe

  I get this message and can't find a way to stop it. A program that is running on this computer is trying to display a message

  The alert program path: C:\Windows\system32\MsiExec.exe the Player version you want to install is less than what is installed.

  Any Suggestions

  Thank you

  Peter

  I also get it exactly the same problem. Started about 2 weeks ago. Trouubleshooting now... I'll post what I find.

  Thank you. A question, how to deal with "" the version of the player you want to install is less than what is installed.? "" This will go away on its own?

  Thank you

  Peter

  Peter-try completely remove Adobe Flash Player, and then reinstall. I did this on my machine and will need to see in the next few days if this has worked for me or not because I don't know how to manually recreate the guest. Best of luck and post back how it goes!

  Here are the instructions for uninstalling Adobe:

  https://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Reinstall: https://helpx.adobe.com/flash-player.html

• 27 installed everytime I start firefox it ask if I want to enable firefox change my hard drive and I have to enter the admin password never did this before u

  Firefox updated the browser. I'm a symbol of the admin in the corner of the icon (win7) whenever I run the application ff it ask if it is ok for firefox to make changes on the hard disk, enter admin password try to disable or correct thank you don369

  A possible cause of this error is that Firefox is configured to run as administrator.

  Make sure that Firefox is not set to run as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

• Open / program runs and minimzes maximizes and closes, yet all other parts if the program does not work

  I can open / run firefox. It can be enlarged or resized without problem. links on desktop will open. Yet when I click on the search bar, or on what the main frame is a reagent. I reinstalled the previous versions and the more resent. nothing solves the problem. I like to use firefox and tend to have few or no problems. to recap. It turns on, can be resized, or closed, but nothing, not even the help button can be clicked. What can I do? does that mean that I need to use opera or ie to access the internet now. Oh no.

  How I solved this problem:

  -uninstalled / reinstalled Firefox 16.0.1 twice (the problem was still there)

  -uninstalled Firefox and checked remove personal settings / bookmarks

  -cell to download previous Firefox 15.0.1 (USB transferred .exe on the desktop)

  - then I erased my %temp% + my basket

  ran-a (one) AdAware, McAfee + TrendMicro Housecall virus
  software

  -i then portable mental hard crashed twice during startup

  -a ran the recovery boot

  -ran (one by one) disc cleaning + disk defragmentation

  -restarted

  -reinstalled Firefox 15.0.1 (aka old version) (checked and I saw it worked)

  -restarted

  It took 7 hours to fix (I was playing games on another console half the time). as is the everything works fine, once again. a few bookmarks are still missing (the weekend every week/fortnight I backup bookmarks). Well at least I can still use Firefox. I think that the problem was due to a theme that 16.0.1 couldn't run properly, so she corrupted the whole program interface. geek power-geek love.

• DC Standard Adobe works with MacBook Pro?   When I tried to download, I get the message not available - only for windows!

  I was chatting to Adobe online, I got info that it WORKS with the MacBook Pro.  I went on the link they sent to download and received the message is not available for the MAC operating system.

  If you download the mac version, it should be ok.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I have re installed my copy of Acrobat 7.0 pro. can't go beyond blurb activation even if the program is registered on adobe webssite

  Need help to get beyond the point of validation. The program is saved. I just had to re install the program on my laptop and now I can't go any further. Tried the phone activation and was sent to the adobe Web site. Thanks, Dave

  For Acrobat 7 activation servers have been disabled. However, you have not need activation.

  See here for the program Acrobat 7 download that does not need activation. Activation server stops for Creative Suite 2, Acrobat 7 and Macromedia products

  Look in the middle of the post for the link. Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Go to 2. Download and install CS2 applications.

  Click on "English" to join the correct file.

  If you want more information about Acrobat 7 you can see in my post. Acrobat 7 - installation, activation and update operations

  Educated man

• How can I email in microsoft word processor etil don't showup in "default programs".

  I created a Microsoft word to address letterin processor. Tried to email and it said to put in place of "default programs". When I comes to default programs theres no Microsoft word as a default value.

  Hello

  · What is the operating system on the computer?

  You must set the default e-mail like Outlook or Windows Live Mail on the computer program to send emails from Word.

  If you are running windows Vista or Windows 7, then you can follow the procedure from the following link: change which programs Windows uses by default: http://windows.microsoft.com/en-us/windows7/Change-which-programs-Windows-uses-by-default

• When I try to open Word 2010, get error "this file has no program associated with it for performing this action. Create an association in the control panel to set Associations "."

  When I try to open Microsoft Word 2010, I get the error: the file, try opening is c:\program files (x 86) Microsoft Office\Office14\WINWORD. EXE.

  When I check my file associations, there is no winword.exe to associate it with Microsoft Word.

  Any suggestions?

  Thank you

  Please see the thread similar to the following for a solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/this-file-does-not-have-a-program-associated-with/1dd8f34f-67aa-43CE-af0c-50387c5431a6

• I am running CS6. I break a freeze a frame of my the program monitor and record anywhere. It is screwed.

  This image is squashed horizontally and cannot be used to send to the client in any format that the aspect ratio is wrong. However, I can use this image in the timeline, and everything is good. What is going on?

  [double post removed by mod]

  Its in the export settings. In the its value screendump PNG, but you can choose other formats even if you wish.

  

• First Pro CC2015 clip length setting leads to freeze of the program monitor

  Well, I decided to test 2015 for a project and my boy, I like the color of lumetri, but something is seriously messed and makes use of this impossible version.

  Whenever I decide to cut a clip in and out display in the window of program just freezes for up to 10 sec. And it continues to be every time no matter what.

  I tried to erase the pref I have different places.

  I uninstalled ball push (don't see why this should have an effect, but saw someone else mention it)

  I checked the video ram and many left

  I have a lot of free ram

  IM on windows 8.1

  Intel 4770K

  32 GB of ram

  a lot of hard drive on the left and a fast ssd disk cache

  What gives?

  

  It is perhaps useful?

  Video display stops - first CC 2015

• do not display menu when the program is not running

  Hi, I did with an XControl I can start the program with a start button.
  I deselected the toolbar, Run and Abort button when runnning and the program runs with only a custom Menu, just like I want.
  When the program stops the menu and the toolbar is visible (as usual). My question is - can you choose not to show the menu and the toolbar when the program does NOT work?

  During execution of the edit mode, it seems reasonable to return to editing mode later.

  Once the program is distributed to end users, edit mode is meaningless. Built in a standalone application or at least to define its 'open operation' and close once. The program should never be in a stopped state. Create a state machine passing the State idle when it's not what anyone.

• LVDT offset before running the program

  Hi all

  I use an LVDT to measure the movement of the ground. This must take into account both the consolidation and swelling and therefore requires the LVDT to move in both directions. As a result, the voltage must be reset after the LVDT is pushed so that it can record both negative and positive direction. So far I managed to do it using a business structure that runs when the "zero" button is pressed. However, it comes into force once the program is run. What I need is a button "zero out" which can be used before the program is executed. I want so push in the lvdt, click on the "zero" button, then start running the program to avoid these initial tensions is recorded on the xy graph.

  I found a vi file that does this, but it was very complicated and used old version of labview. I'm relatively new to labview and therefore could not follow the coding on it.

  I've attached the vi file to make it easier to understand. Your help is greatly appreciated

  See you soon,.

  Gurung

  Two screen grabs show how I did the same 'Auto zéro' function when you use an LVDT to measure displacement, I was also saving strength at the same time then graphically representing the post record results.

  On the first race the true / false loop is set to TRUE, in this case the displacement is subtracted from zero to provide compensation, this offset value is then passed to the shift register where it remains as a constant for subsequent itterations of the main loop, while the value is simply passed straight through the true / false loop with nothing done to it on all iterations after the first.

  The offset value is then added to the data read from the LVDT to provide a number of displacement from zero since all that the program was headed all first. There is a 'Save' button on front of who's in a hurry to start and stop recording data - hope this is a help - Mike