Isolate the device safety work

Similar Questions

• App hangs on the device, but works well on Simulator

  Hello! Last week I had an approved app and it is already in place in the BlackBerry App World. Before being approved, he rejected once, the e-mail message noted that "when testing your app on BlackBerry Z10, I found that he was unable to throw."

  I replied stating that the app has worked very well in the Simulator and asked some tips to solve the problem. It seems that the application got reparsed as overnight has been approved.

  Today, I had the chance to test my application on a real device and I found it crashed right after the launch.

  I don't know what could be wrong with my application. I'm guessing that the reason of this problem could be something similar to this thread; but I think I'm not directly joking with the camera in my code, everything is built on Air.

  Could you point me in the right direction please?

  Thank you in advance!

  What version of the OS is the device running?

  AIR 3.5 is not supported up to 10.2, which is not available to consumers right now better I know.

  If the camera is turned on between 10.0 and 10.1, check that your application - app.xml file appeals to AIR 3.1 namespace and not the AIR 3.5 namespace.

• I see an activation which invites when I enter my product key says that's an upgrade install not the device, this worked fine on my old hard drive.

  Prompt for activation!

  Changed the hd on my pc and upgrade to ultimate version so I had to install xp first.  Now, I see an activation which invites when I get home my says product key is for upgrade not clean installation, it worked well on my old hard drive, there is no option in the wizard product activation phone how to turn it on

  Update install requires that the eligible previous operating system is installed and activated until the key is working.

  Yu seem to have correctly installed the OS upgrade - and it will never work without assistance.

  If - and only if - you have a valid COA sticker on your computer, you can try either by calling the line Activation, as suggested by Riz_Ford, or you can also try the method of double-install from here...

  http://www.winsupersite.com/article/Windows-7/clean-install-Windows-7-with-upgrade-media

  Note that the same procedure applies for WIn 7 for Vista.

• Why my external speakers does not connect? I followed the instructions from microsoft and it happens that the 'device' is working properly.

  Speakers on my lappy (old dinosaur, sorry) not computer savvy works fine, but I can't seem to connect external speakers. I did the thang check sound and speaker and sometimes peripheral works properly, but it does not help at all,...

  Hello

  1. What is the brand and model of the speakers?

  2 are these speakers work on any other computer?

  Please follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• VISA: (Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system.

  See the other post on this subject, but my situation appeared a bit different (http://forums.ni.com/t5/LabVIEW/VISA-Hex-0xBFFF0011-Insufficient-location-information-or-the/td-p/69...

  My device manager says that the device is functioning correctly, MAX also tells me that the device is working properly, but I still get this error when I try to open a panel of test VISA in MAX or log VISA in labview.  When I click on validate in MAX under port settings that she even says that he opened a successful session of VISA.  But it does not connect in the Panel test VISA or in labview.  See the screenshots below.

  No device manager said that all was well with COM1, see the pictures attached.  I was able to get this working to uninstall the device and the removal of all the drivers and reinstalling.  Don't know what the problem was, but from the entire apparatus of zero was able to fix it.

• My smart Skate E - lan is missing, I charge and it does not appear in the devices?

  After downloading a new driver, cannot locate, it changes nothing. Do not read at startup.

  Hello
  Since it seems that this machine worked correctly in the past, I don't think it's a problem with the drivers. There might be something blocking the unit from working. Have you downloaded anything recently, maybe when you were on the Netflix site?

  I suggest try to boot mode safe XP and see if the problem persists. If so, I suggest to try a system restore to a point where the device was working.
  http://support.Microsoft.com/kb/306084

  I hope this helps.

• Simulators of the device does not

  I'm developing an application with the Eclipse plugin. usually the device simulators work fine but now, they take in excessive overtime and when he finally launched, it records not the intervention of the user such as clicks, movement of trackball, keyboard etc..

  Any idea?

  There was an uncontrolled error in my application, it was not the device Simulator.

  The mistake was calling a static method that calls a function not static with a private variable.

  Thanks for the answers though. I appreciate your interest.

• BlackBerry Smartphones blackberry 9000 mds on server and the device (mds control center)

  Hello

  I have the following problem. We use the SDM Service on the server to push the software programmed on a few blackberrys (e.g. 8800). All Blackberrys are saved on the server in the list of mds.

  The new Blackberry 9000 does not appear in the lists of mds. And after the activation of the SDM control center is not on the device. the control center of mds push automatically by group policies. but I can't found on the device. How can I make the blakcberry 9000 working with SDM on the Enterprise Server BES services?

  We use the 4.1.4.15 version.

  I'm sorry for my English. IM German.

  Thank you.

  !! UPDATE!

  I had a contact with level 2 Support T-Mobile. They told me to download the latest firmware to the updatecenter of t-mobile (has not heard of so far), then install this software on a PC and install the MDS Runtime of this package to the devices.

  After the url of the download location, where I found the firmware:

  http://updateservice.t-mobile.NET/BlackBerry/download/download.do?ref=%2Fservices%2Fftp%2Fproftp%2FS...

  --> Download

  --> Installation for PC

  --> Start the Desktop Manager

  --> Connect Blackberry "BOLD"

  --> uninstall all the "fragments" of MDS duration of unit

  --> restart the Blackberry device

  --> Install MDS DURATION & MDS default Launcher (V 4.6.0.13)

  --> Restart device

  You're good...

  The "BOLD" today BBlackberry is a device registered and within seconds all of our MDS applications when pushed to the device and work perfectly.

  I hope this will help you too.

• Why Apple ID work for the devices iOS and Yosemite... .but not for iCloud?

  Recently, I upgraded to Yosemite. So I was forced to change my PWD for Apple ID.  I have AN AppleID account. After having changed the PWD, other requested change upgrade iOS devices, and all the work.

  UNLESS iCloud refuses to accept my new Apple ID... All other devices, updates work fine with the new PWD AppleID...

  What is the problem with iCloud?

  How can I force it to accept the Apple that accept all other devices/systems ID?

  Jim B

  Have you tried the signature to iCloud and then again?

  What to do after changing Apple ID or password - email address

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• Portege M700 - 3G does not work and has no entry in the Device Manager

  Hello

  I've already found [this | http://aps2.toshiba-tro.de/kb0/TSB0302TL0000R01.htm] for 3G installation, but it does not help me. In my device manager is no entry called 'Data Interface', and that's why the guide will not work. Under "modem" is only the "TOSHIBA Software Modem. The LED next to the orange wlan LED is off. When I use FN + F8, the I get only entries for Wlan and Bluetooth. In the Bios (or what ever Toshiba call a bios, 3 pages with very few options, very bad in my opinion) I couldn't find any option to turn on the 3g modem (I suspected that it be turned off in the Bios).

  Is there an option where my 3G modem could be turned off, so that the device manager would be ' d recognize it? WIFI and BT operate correctly.

  A new SIM card is correctly inserted in the SIM slot behind the battery. I can't find my problem described in the web or this support forum.

  Any help is appreciated!

  Hello use

  Your laptop is preinstalled with original Toshiba recovery image, I mean you have to factory settings?

• How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  Hung Nguyen

  Hung Nguyen,

  The installation of drivers for all targets in real-time remotely is more or less the same. First install the driver (in your case the NO-Sync) on your PC, then install it on your system remotely through MAX. For step-by-step instructions, see install the software on your NI CompactRIO controller.

  See you soon,.

• The family safety web filtering does not work after upgrade to Windows 8

  Hello, I upgraded a laptop for Windows Vista 8 and family safety works more fully.

  I have updated to the 2012 essentials and I can confirm that parental control is executed. App and time restrictions still work fine, but the filtering of the web site does not work.

  I have web filtering set to allow list only, with 3 sites listed - google, Wikipedia and BBC - but I can access all of the web content.

  I also tried to delete the files in ProgramData/Microsoft/Windows/Parental Controls such as suggested in other posts, but it did not work.

  I can also confirm that WpcMon.exe is running.

  Can you advise what could be the problem?

  Thank you

  Hello

  Thank you for coming back. Please note that the parental control is now integrated in Windows 8. The use of the parental control client that is included in Windows Essentials might not work properly. As before, you upgrade using Windows Vista, you can follow the steps described in this article (click on parental controls) to move properly the configuration of the client of parental control for the parental controls feature integrated in Windows 8.

  Note: Article also applies to Windows Vista.

  Please report if you need help.

  Kind regards.

• adding the new safety device for the family

  Dear all, I recently bought a new pc W8 for my 12 year old son.  When I added the user account for the new pc, I clicked on the box to indicate that he is a child and accessible account parental to ensure that all of the boxes on the right were clicked.  However the new pc does not appear as a device on familysafety.microsoft.com, and I have not received a weekly e-mail, giving me details about its activities on the new pc.  Family safety continues to operate while on his phone w8, on my laptop w8 (on which he is a user).  What I am doing wrong?  Thank you

  Hi frednell,

  Thanks for posting to the Microsoft Community. I understand that the child on the new computer account does not appear in the Family Safety website. To resolve this problem, make sure that the parent e-mail account is defined as an administrator on the Windows 8 of the child computer. After that, please follow the steps below on how to properly manage the settings on the Family Safety website:

  1. On the start screen, type parental controls.
  2. Click settings.
  3. Click the parental control .
  4. In the lower part of the window, click Manage settings on the Family Safety website. Your default browser will be directed to the Family Safety website.
  5. Sign in using the parent account.

  Let us know how things will go.

  Kind regards.

• Ss15 Touchpad stop working, do not show in the devices

  Touchpad appearing is not in the device, yes already tried Fn /F7 Manager, reinstalled fix driver: No... He is a recent problem, works very well with Windows 10.  I have read several posts on this topic. I think remember that unit must first discover the device (touchpad) and THEN you install the driver, or update the driver.  DOE this "Momentum" driver also update the driver of the "mouse"? The reason why I have ask when I go into the driver information for my mouse, it shows today's date.  My mouse is logitech USB wireless.

  I'm just not used to have a device simply disappear from the Device Manager! any ideas?

  Thanks in advance for any help!

  Ron

  Click the driver. This is Logitech, MS, or momentum.

  Go to Control Panel / programs and features/view installed updates and see if the Logitech

  a updated Windows Update.If Yes, that was the missing touchpad?