USB-TC01 gives error-201165 "firmware for this device is too recent.

Similar Questions

• Standard Enhanced PCI to USB Host Controller: a driver (service) for this device has been disabled. Another driver can provide this functionality. (Code 32)

  How to solve: ' Enhanced Standard PCI to USB Host Controller: a driver (service) for this device has been disabled. "  Another driver can provide this functionality. (Code 32). »

  I hv tried to uninstall, shutdown, then reinstall and also put to day, but all to no avail.

  Just to ensure follow-up on the post of joel S can you check the following registry key, which relates to the USB:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?

• Transcend storage device when connected gives error "Windows has stopped this device because it has reported problems. (Code 43) »

  Original title: Windows has stopped this device because it has reported problems. (Code 43) ».

  Hi, I have a storage device 'Transcend', but when I connect it it gives me "Windows has stopped this device because it has reported problems. (Code 43) »

  . in the last ididnt have had problems with this unit. what I can do.

  Shirly

  Hello

  1. What is the brand and model of the device of Transcend storage?

  2. other USB devices work on your computer?

  Error code 43 indicates that one of the motors controlling the unit notified the operating system that the device failed in some way.

  Method 1:

  Step 1:

  I suggest you try plug the storage device Transcend to another computer and check if it works.

  Step 2:

  Also, try to connect the Transcend storage device on another USB port and check if it's work (which you know are working perfectly).

  Method 2:

  You can run the diagnostic Fixit tool. Check out the following link.

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/

  Method 3:

  You can check after uninstalling and reinstalling the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Reference:

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  Note: the information provided in the article mentioned above are applicable to Windows 7 too.

  Method 4:

  You can try to install the latest drivers for the storage device Transcend on the manufacturing site and check if it helps. Check out the following link.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Install a USB device

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Code 43: Windows has stopped this device because it has reported problems

  http://TechNet.Microsoft.com/en-us/library/cc725873 (v = ws.10) .aspx

  It will be useful.

• I have error GETan say for this device does not properly because windows cannot load the drivers required for this device (code 31) to 6to4 adapt #2 and #7 wher can I get these re install

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: where can I find these adapters

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore errors if
  you want and on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the
  Map Microsoft ISATAP appears with a yellow exclamation mark next to it in device
  Manager and you also receive an error message
  http://support.Microsoft.com/kb/932520

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Whith USB Device error: "Windows cannot verify the digital signature for the drivers required for this device...". (Code 52) »

  Original title: open usb drivers problem

  My Dell laptop stops working with USB storage drivers. The removable driver icon is displayed in the devices window and printers with a yellow triangle around!
  I've tried different USB drivers and the problem persists. I tried troubleshooting, and it does not help.
  In the Properties window, I get the following message:

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  I don't remember making any hardware/software changes and do not know how to solve the problem.

  You are welcome.

  Something seems not quite right so contact the store can be a good idea.

  Back to the initial problem as I understand it, is that when you insert an external drive, you get the error 'code 52?

• Error: "Windows cannot verify the digital signature for the drivers required for this device (Code 52)"

  Original title: Wireless cannot verify the digital signature for the card driver from son - after an automatic update of the software.

  We downloaded an automatic update of our HP Pavilion laptop running Windows 7.  This disabled somehow the wireless network adapter.  Readings of the error; "Windows cannot verify the digital signature for the drivers required for this device.  A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or that might be malicious from an unknown source. (Code 52) ».  We tried 2 system restore - problem persisted.

  I solved this problem to roll back the driver to that before the driver that is currently installed.  The wireless activated immediately when done.

• The laptop recovery Toshiba Satellite L505-S5997 problem error: Windows cannot verify the digital signature for the drivers required for this device

  I have a Toshiba Satellite L505-S5997 computer laptop and my hardrive recently crushed, impossible to restart.  I installed a SEAGATE 500 GB/sata/GO 16 MB of Cache, 7200 RPM hard drive. I ordered recovery for the computer disks and many of the drivers will not update or install without error that tells me that "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) "error.  Also, when I try to update Windows 7 I get the ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "When I try to download the service pack from the Web site it is usually interrupted with another error.  I tried to go to the Toshiba website and download the drivers needed and utitilities but nothing seems to work.  I am at a loss to try to seek and find a solution.

  Are you sure that the original problem was caused by a failure of the HD, did you test that the hd with the utility bootable disk from audit?

  As if you reinstalled to a new HD using that the required all defined recovery Tosh disk drivers would have been installed in this process.

  Assuming that Tosh then rebooted successfully after recovery, windows update would have run some important updates automatically. If that failed then it would seem that something is happening with your system.

• Windows cannot verify the digital signature for the drivers required for this device

  I get this error from a specialized device that uses a usb/network card connection built-in.  It is with windows 7 Home premium.  Now I know that the source of the driver.  It is the latest driver and labeled for use with Vista.  I need to override this security check, so I can use this equipment.  It is an integral part with me a living. It is likely absolutrly nothing wrong with the driver.  I downloaded from many sites without modification.  This equipment worked well under Vista.

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I found the answer by looking for other sites, it's probably here somewhere as well.  Restart the computer.  During restart, press "F8".  Select Disable Driver Signature Enforcement in the start menu.  This fixed the problem of driver in my case.

• WALKMAN NWZ-S545 gives error cannot start (error 10) device in the Device Manager (and not driver for this device found)

  Under Xp (sp3), Device Manager gives me an error for a Walkman NWZ-S545.  XP sees it as a MTP device, but it does not start.  The Device Manager will give me 2 error messages: device will not start (code 10) not and no driver not found for this device.  The walkman works very well with my other machines on the LAN XP but naturally one that I run my media (a all my MP3 etc.) is the one that has the error.  All of my PC are almost identical (with the exception of the server, duh).  I changed USB ports, uninstalled/reinstalled drivers, called SONY to dozens of times, nothing works.  Is a service not started that must be, a driver damaged, what?  Thanks for your help in advance.

  Hello

  I suggest you run the fix that is present in the link below then connect the Walkman on the system and see if the problem is resolved.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  I suggest to uninstall the drivers and firmware for the walkman of the system then download it from the Sony site and install it on the system and check if the problem is resolved.

  http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=NWZS545&SelectOS=7#div_pos_94

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title - USB - IF xHCI USB Host Controller

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

  Hello

  USB devices remove all you can - restart the computer - is still there, the error? If it isn't
  It is related to one of the add-in devices that you removed. If she is still there, then, the question is
  either a device internal who can not remove or physically with the USB bus itself.
  If it was not there, add devices at a time until it is displayed - keep in mind that it is
  possible that there are two (or more) devices in conflict over the issue. Once you
  identified the check of the aircraft with the help of the manufacturer.

  1. to find the control panel - device - device - right-click on it - uninstall - Manager then
  Restart the computer to see if it clears.

  2. same place - double click on the device - driver tab - driver update - to see if that helps.

  3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
  online documentation and drivers, diagnostics and ask questions in their forums on all known
  questions. Update the Bios and chipset or other USB drivers.

  =====================================

  If necessary, we will use these additional troubleshooting methods:

  How to fix Code 31 errors
  http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.

  When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.

  Hey Abdul HamidNagoor,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  If the problem persists, follow the steps in the article.

  How do I recover from a corrupted registry that prevents Windows XP startup

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• Network adapter 802.11n keeps stalling in Message' no. get error Windows 7 drivers are installed for this device. »

  Original title: 802.11n network adapter keeps dropping out

  My network card, Ralink 802.11n for Windows 7 Professional 64-bit, continues to stall as I have no connection to any network.  When I check the network card, he said, "no drivers are installed for this device."  If I try to update the driver, it indicates that the drivers are up to date.  The only way to get the device working properly is to shut down the laptop and restart.  When I do this the device manager says that the network card is working properly.  I looked at other solutions, but none of them seem quite fit.  I use a HP probook 4320 s laptop and I recently installed a I have to drive with the Windows 7 software pre-installed on the drive.

  Hello

  According to the description, I understand in your computer continues network to drop out of school and gives the error that "no drivers are installed for this device. I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  This problem may occur because of corruption in the network driver or the network driver is not properly installed in your computer.

  Please follow the troubleshooting mentioned method below to check if his help.

  Method 1: run the network troubleshooter utility.

  The problem report contains one or more event logs. Administrators Network and technical support staff can use the information in the event logs to analyze connectivity problems or help interpret the findings. You can find this information by clicking on display of detailed information on the last page of the troubleshooting tool, or by following these steps:

  1. Open troubleshooting by clicking the Start button, on Panel configuration, and then, under system and security, clicking on find and fix problems.
  2. In the left pane, click View history.
  3. Right click on the troubleshooting report, and then click details.

  If the problem persists, follow the next method.

  Method 2: uninstall and reinstall the network driver.

  Please follow the steps below.

  1. Open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In Device Manager, look for the network adapter.
  3. Right-click on the adapter and select uninstall.
  4. After uninstalling the network driver restart the driver.

  After the computer restarts, Windows will automatically try to install the driver real network. If not, I recommend you download the latest driver available from the manufacturer's Web site and check if its help.

  Please follow the below link to download the driver from the manufacturer websites (HP) network.

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4145372&swLangOid=8&swEnvOid=4059

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• Kindle Fire PC USB connectivity, the drivers for this device are not installed. (Code 28).

  I connect and transfer content from my computer to my Kindle all the time, but today when I plugged the Kindle my pc tells me that the device needed troubleshooting.  After you run the troubleshooter, I gives me this message:

  "The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver. »

  This has never happened before, and, no, I have not recently downloaded new applications, programs, updates or had a system crash. It was, as usual, a few things. Where it says "to find a driver for this device, click Update driver" which is non-interactive. I can see it, but you can't click on it. That's happened? What should I do?

  Scott.

  Hello Scott,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because the parameters or corrupt device drivers.

  I suggest you run this Microsoft fixit and check if it helps.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  Please also try to update the device drivers by using the steps described in this article and check.
  Reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

  Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

  I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

  There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

  • Remove or reconfigure newly installed unit.
  • Restore the version before your driver update.
  • Use system restore to undo recent changes in Device Manager.

  Step 1: Roll back the driver to the version before your update.

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

  http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

  I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

   

   

  Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

  Thank you.

• can someone please give me the code for this equalant?

  Hi friends
  
  Hi friends I need and equivalent of the code for the script because I shouldn't use below the script.even below if it entitles answer.please give alternative
  
  NVL2 (EndTime, 'Successful', 'Error') "Status".
  ===========================
  
  "" The real need is, if the "endtime" is null means I want the error if status is not null means I want status to succeed
  
  can someone please give me the code for this equalant?
  
  Thanks adavance
  
  Thil

  Select decode (endtime, null, "Error"
  'Successful') that the 'status' from tablename