I want to use a chart of real-time-drawn arrow in Premiere Pro (a bit like the Tarantino style).
I created a graph of arrow in After Effects, and I want to import into Premiere Pro to cover a precise shot to point AT something. The problem is, after I made the chart after affects and import it into Premiere Pro, the arrow is there but the graph also includes the solid square color background. I don't want the background. I want just the arrow, so that I can ask on a whim. How can I do?
Thank you
Jake
Make some AE by using a codec that supports alpha channels. I like Quicktime movies in the Animation or PNG codec for it. RGB + Alpha, Millions of colors + and straight (i.e. NOT premultiplied).
Use the rendering queue. Do not export.
Tags: After Effects
Similar Questions
-
When I use the library function node call in real time, is loaded only once for all or load the DLL every time when it is called?
I have a critical application in real time, in which I use a piece of DLL function developed in C++. It is ok? Make sure any senior developer?
Thank you in advance.
The user interface thread is the thread that is used to update the user interface. It's slow. And it's supposed to be that way because humans are slow.
The call library function node can be configured as this thread to use in the configuration for it dialog box. Please visit the LabVIEW documentation on how to do this.
-
* Original title: upgrade
I want to upgrade to a newer Windows operating system Windows Vista Home Pro 64-bit. What is the recommended procedure? I see that Windows 7 or 8, a free update to Windows 10 is offered. Should I buy 7 or 8 then you spend 10 or just buy 10?
Thank you
Jim
Hello
Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.
There is no free upgrade Vista to 7, 8.1, or 10.
Follow these steps before you buy Windows 7.
Microsoft sells more than 7; Try Amazon.com.
Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.
If this is not available, Windows 7 will not properly work for you.
Run the "Windows 7 Upgrade Advisor.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=20
Check if your specifications are compatible for Windows 7:
"Windows 7 system requirements"
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
"Windows 7 Compatibility Center" for software and hardware:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Windows 7 upgrade paths:
http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx
«Installation and reinstallation of Windows 7»
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
@@@@@@@@@@@@@@@@@@@@@@@@
Follow these steps before buy you and upgrade (new installation) of Windows 8.1.
Microsoft sells more than 8/8.1.
Try Amazon.com, etc.
Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.
If this is not available, Windows 8.1 not install and work properly for you.
There is a lot of information in this first link from Microsoft:
Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here
"Update to Windows 8.1: FAQ".
http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
"8.1 for Windows system requirements.
http://Windows.Microsoft.com/en-us/Windows-8/system-requirements
@@@@@@@@@@@@@@@@@@@@@@@
How to buy Windows 10:
http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700
But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.
https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs
" System requirements Windows 10"
https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements
Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015
"FAQ Windows 10.
http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ
See you soon.
-
I first Pro CC and you want to create DVDs. I understand this need Ii Download Premiere Pro CS6 (with rappel) I find Premiere Pro CS6 in My creative Cloud window. BUT... it only allows me to install. He said "up to date". There is NO button install. How to do it?
Previous through Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous
- and if you have Cloud application manager 2015 https://forums.adobe.com/thread/1906752 of difference
Instructions again, cloud or version https://forums.adobe.com/thread/1992717 serial number
-a of notes on different versions of cloud and step by step on these differences
-contains information about the separate library download which is necessary
-
Use Lightroom CC as a source of import to Premiere Pro?
I have all my files video camera and phone stored in Lightroom CC. Can I use LR as source for video in Premiere Pro CC, without duplicating the video at all? Or at least as easy as Apple has done with the help of iPhoto/Photos + iTunes for music into something like iMovie?
TIA
Premiere Pro and Lightroom are unrelated to each other.
-
Using FTPClient on a real time with system Exec.vi
How can I tell FTPClient.exe address target when I start this executable with system Exec.vi in Labview? I don't want to reinvent the file FTP utility used by MAX with targets in real time. I want to run this executable to a labview support utility without using MAX to do.
Is this possible?
Danny
Thanks for the info. Your "bad mood" response "suggests" a response to my question. However, the full answer to my original question is that it is not possible to use FTPClient.exe outside MAX. It is therefore not possible to spend in the address target at run time if the FTPClient.exe runs external to MAX. FileZilla is a good choice - there are also other FTP clients out there, but you pointed out a solid choice. Thank you.
-
Premiere Pro does not support the use of gtx780ti in the cc.
Premiere Pro and the media Encoder are not certified the converter.
If you have never use a 780ti If you would Let us know how cuda is available.
There has been a change in the way we approach maps officially unsupported in first Pro CC.
If your card meets all other requirements, the largest being 1 GB of dedicated VRAM and drivers up to date, including the specific drivers, CUDA, on some machines and the first is updated, then the system will detect a card not taken in charge who might still work and prompt you with a dialog box that says that you can enable CUDA acceleration at your own risk. In this way, that you need not to wait for us to officially add your card.
You should not have to perform the old hack who says John.
-
Use of Internet reporting real-time bandwidth
Need advice with regard to the selection of software and the physical layout. I was invited to present reports on the use of the internet;
-IP address
port/protocol
-bandwidth
We havcusco cisco 4500.
Our ISP router's router 3400 metro (fiber to Ethernet media converter).
We have the ISP that is connected to a port on the 4500 in vlan 99, users are in vlan (using a gateway to virtual layer 3) 44.
If I want to make just a quick capture could I just simply connect a workstation with wireshark to a port on the 4500 and place this port in vlan 99?
If so I guess that the same theory would work with the tool as bandwidthD which is best suited to long term capture and has a nice pretty GUI for my manager?
Bit confused as to whether I need a mirror or span port configuration.
Thank you
You need to configure SPAN with VLAN 99 as a source and the port that your workstation in question is connected to the destination. Otherwise most of the traffic will never reach the workstation considered.
-
I would also have my old favorite tool and have not lined up on the side of the opening page.
First of all, make sure that you are not in mode "full screen". The F11 function key toggles between the normal modes and full screen.
Then, you can enable/disable the various toolbars using the Classic View menu. If you use the Firefox orange (abbreviated menus) button, press the ALT key, or press the F10 key to display the classic menu bar.
If you are already showing the "Navigation toolbar", but the part of the address box is missing, you can reset your toolbars to their default values. Here's how:
(1) the folder settings personal (AKA Firefox profile)
Help (or Alt + h) > troubleshooting information > "view file" button.
(2) switch back to Firefox and quit the program (for example, file > exit)
(3) wait a few moments for Firefox complete update of the files in the settings folder, then rename localstore.rdf to something else, like localstore - bad.rdf or localstore.old. Alternatively, you can delete the file.
(4) you are finished with your profile folder and you can restart Firefox now.
A little luck?
-
want to use 24 "iMac as a monitor with my mac book Pro but the iMac doesn't have a port thunderbolt
Can I connect my iMac 24 "2.16Intel Core 2 Duo with single firewire ports and use it as a monitor with my MacBook Pro (thunderbolt port)? Thank you very much.
EDIT: What year is your iMac? See if your iMac is supported by the target Display Mode using the link below. If your iMac, you can use a port Mini screen Mini display port cabe using your iMac on your MacBook Pro screen. I hope this helps!
Use your iMac as a display with the target - Apple Support Display Mode
P.S. The target Display Mode feature does work through Thunderbolt or Mini display port, you can do this via Firewire, as is any other protocol used to transfer files, not for input/output display.
-
I want my home page to open every time I open a new tab. Where is the setting for that?
When I open a new tab, it is always empty. I want it opens automatically to my homepage everytime I open a new tab.
I thought I found a framework for this, but I can't find it now.There is no setting for this, but you can do this by using an add-on such as:
- NewTabURL - https://addons.mozilla.org/firefox/addon/newtaburl
- New tab Homepage - https://addons.mozilla.org/firefox/addon/new-tab-homepage
Another way to open the home page in a new tab is in the Middle, click the home button in the navigation toolbar.
-
We have military systems without any internet connectivity at all where we would use these products. Activation of the license via phone or export/import license files might be acceptable, but not more.
Are there important limitations to be aware of that it can be made to work?
The software needs to have access to the internet periodically to confirm the subscription remains in good standing.
-
IM is more alive in Mauritius, but when I try to upgrade my free trial status (I have download in Mauritius) I said that it is not available in this region. I am now installed elsewhere, but for some reason that it is not recognized. Can someone help with the settings?
A few changes/Verify account https://forums.adobe.com/thread/1465499 links that can help
-html http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id.
-
The 1473R CAN be used with the real-time operating system of NOR?
Hello, I am trying to determine if I can use the OR 1473R framegrabber PCIe FPGA in a PC based computer time real OS OR. Anyone know if this is possible? So I think that it should appear to the OS in real-time as a target FPGA that can transfer the data via DMA, but I wanted to make sure the drivers would work in real time of NEITHER.
I appreciate any info on this!
lukepike,
Yes, you can use this device with real-time OS of NOR.
-
HELP-I can't open things such as the restoration of the system or the command prompt, etc without being asked to "choose the program you want to use to open this file"
so boringHello
Download and run the fixit tool from the link below and check if this solves the problem.
http://support.Microsoft.com/kb/950505
Kind regards
Afzal Taher
Microsoft technical support engineer
Maybe you are looking for
-
Hyperlink in iOS 9.3 PROBLEMS
I have a problem that any kind of hyperlink is either safari or mail does not at all after updating to iOS 9.3! This applies to both my iPhone 6s and my mini iPad 4 She did the safari and mail useless - any Web site that uses Hypertext links in the m
-
More Sound and Vibration - Leq measurement?
Hello I'm new to following Sound and Vibration and can't seem to find how to measure Leq. To clarify, I do not have LabView with this package, just the Sagno & Suite 2010. Currently, the only options are linear, exponential, maximum and equal trust (
-
DeskJet 2540: Lockout of printing wireless password protect - how to reset?
Hello I just bought a Deskjet 2540 and I'll it using my OS 10 devices (Macbook Pro, iPhone and iPad). I tried to connect using the option 'Wireless', but the device request a password that was not printing sheet which has been generated. I think I h
-
Diagnostic policy service will not run despite all methods found to fix
As stated in the subject, I can't get my diagnostic to run, strategy service that prevents me to perform troubleshooting services and others. I started having problems earlier when my laptop stopped while he was starting because the wire had been dis
-
Not able to print from the computer. Windows 7.
WiFi printer worked fine, now can not print from computer. Get the error message and when I cancel the document and present it again I have to keep getting an error message. I ran the utility troubleshooting printer but that did not help. Have downl