The 1473R CAN be used with the real-time operating system of NOR?

Similar Questions

• GetDiskSpace on real-time operating system

  Is it possible to query the free space on the disk in a PXI system running the operating system in real time.   I get a lot of linker errors when trying to use the GetDiskSpace function which works under Windows. (In Labview, it is apparently something called read Volume information but I was not able to find an analogue to the CVI 8.5)

  Jim

  Hey Jim -.

  The problem is that GetDiskSpace is implemented in the Toolbox of programmers, who is not yet supported on Pharlap.  However, you should be able to pull parts off toolbox.c (\CVI85\toolslib\toolbox\toolbox.c).  All the work to get this function is done by the GetDiskFreeSpaceExWin32 API function, which is supported on Pharlap.

  Take a look at the source code and let me know if you have any questions.

  NickB

  National Instruments

• Can be used with ESXi 4.0 HP system management tool?

  Hello

  I'm installing ESXi 4.0 on HP DL380 G4 server and I was wondering if the management of the HP tool system can be installed along side the hypervisor, so I can remotely check the condition of the equipment of the machine.

  Anyone know if this is possible?

  Thank you

  I had little experience with HP SIM, it's been a while. So with ESXi, there is no agent that runs on the host computer, it uses the CIM (Common Interface Management) which is an API that can monitor the hardware and return this information to tell your server HP SIM. For the configuration and use, I recommend looking at HP and the involvement of the HP documents. If you have installed ESXi HP image, then from the point of view host you should be good. You must later have your SIM Server talk to host ESXi and sure he monitors the components you want and alert on it, etc.

  Here are a few articles around ESXi and CIM blog:

  http://blogs.VMware.com/ESXi/2010/04/hardware-health-monitoring-via-CIM.html

  http://blogs.VMware.com/ESXi/2010/05/hardware-health-monitoring-via-CIM-part-2.html

  http://blogs.VMware.com/ESXi/2010/05/hardware-health-monitoring-via-CIM-part-3.html

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Hi I have a new Apple Watch - sport Strip. Is it possible to buy separately strips that can be used with the watch?

  Hi I got a new Apple Watch as a gift at Christmas - sport band, white, 42 mm. 7000 series. Since this is my first Apple Watch, I wonder if I should check all options at the store before opening the box. Is it possible to buy separately strips that can be used with the watch?  Thank you, in advance, for any advice, guidance, you can offer the wisdom.

  Hi, Kate

  Yes - any band Apple Watch 42 mm fits your Apple Watch.

  Non-Sport bands have different lengths, then check the circumference of your wrist and see Apple Watch Sizing Guide (that compares all the Apple strips) before you buy separate bands:

  http://www.Apple.com/shop/watch/Sizing-Guide

  Try them in an Apple Store, it's also a great option.

  The Sport of Apple Watch also has an anodized aluminum housing, while the non-sport bands have different metals of cards and/or links (this does not affect the compatibility, only appearance).

  Information on how to pass the tapes: change your Apple Watch band - Apple Support

• What is the first version of labview can be used with a USB-6001

  What is the first version of Labview, which can be used with a USB-6001?

  According to the user's Guide, you must DAQmx 9.9 or later version.  The oldest version of support DAQmx 9.9 is LabVIEW 2010 (DAQmx and LabVIEW version compatibility).

• Messaging Instant Lync can be used with the Hosted Exchange mail server?

  Messaging Instant Lync can be used with the Hosted Exchange mail server? Let me rephrase the question. As everyone knows already Lync messenger is used with Office 365, but can be used with the same way hosted exchange server, it is used with Office 365?

  You will find support for MS Lync in these forums-online http://social.technet.microsoft.com/Forums/en-us/category/ocs

• The pen Surface Pro can be used with a Dell computer, or does it take a specific Terminal?

  The pen Surface Pro can be used with a Dell computer, or does it take a specific Terminal?

  Hi Luzs,

  Could you please let me know if you want to use from the pen of Surface Pro with Adobe Applications for editing?

  Dell computer is also a touch screen computer you have?

  Kind regards

  Tanuj

• What is the most advanced version of ACR that can be used with Photoshop CS5?

  What is the most advanced version of ACR that can be used with Photoshop CS5?

  It will open a Canon 5 d Mark III RAW files?

  CS5 can deplete to ACR 6.7.1.  CS6 started with cab 7.0.

  The 5 d Mark III has been first supported with ACR 6.7.

  ACR 6.7.1 can be downloaded from the links on the download page for Adobe Camera Raw Mac and Win:

  http://www.Adobe.com/downloads/updates.html

  References:

  http://helpx.Adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  http://helpx.Adobe.com/Creative-Suite/KB/camera-raw-plug-supported-cameras.html

• MouseCursorData can be used with the SDK 3.6?

  Hello!

  playerglobal.swc in the title of 'libs/Player/10' has been substituted for the one under "libs/player/10.2".

  -target-player has been defined in 10.2.0.

  When you use MouseCursorData, there is no error in compilation.

  However, when running or debugging the application Exception occurs.

  VerifyError: Error #1014: class not found flash. ui::MouseCursorData.

  playerglobal.swc for flash player 11 can be used with the SDK 3.6.

  the value target-Player 11.0.0.

• Should I use the Filter SmartScreen with MSE (with enabled real-time mode) together?

  I am running Microsoft Security Essentials in the real-time mode, however, I wonder if it's enough. I have also enabled the smartscreen filter or MSE already covers who?

  I have both, would allow unless it makes your computer run slowly. In this case, just activate time mode real MSE.

  -My opinion-
  You must upgrade your browser to Google Chrome and install Comodo Internet Security. Better security and performance for your PC :D

• How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?

  How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?
   
  It's only 8.3% of disk space!

  http://digital.NI.com/public.nsf/allkb/E7E2F5657B6026358625750B007201A6?OpenDocument

  The national Instrument is reformat that you drive less than 126 GB or replace the drive with a less than this size.

  Please OR tell me you go fix your LabVIEW Real Time soon, and that we will not have to wait for LabVIEW RT 9.2.1 in 2011 for this one to fix.

  http://upload.wikimedia.org/Wikipedia/Commons/9/90/Hard_drive_capacity_over_time.svg

  Readers as high as 126 GB or more have been around since mid-2002.  It's about 7 years now and LabVIEW Real-time STILL cannot use greater than 126 GB drives!  Please OR.  Do something.

  We deserve the patches for older versions of LabVIEW RT.  What about updates to LabVIEW RT.  As 7.0.2 7.1.2 7.6.2, 8.0.2, 8.2.2, 8.6.2.

  We don't need new features or versions of LabVIEW RT as 9.0 until we have some of the bugs fixed in existing versions.

  Kevin.

  
  

• cRIO and 9234 modules do not work or communicate via fpga with accelerometers, fpga, connected to the real-time application is also related to shared variables related to modbus slave

  Hello

  I have a compact rio, which has a 4 way frame this chassis is the three modules of ni9234, they are related using FPGAs for application in real time, then using shared variables in the low-speed loop associated with a slave modbus to communicate with the domain controllers, the nor 9234 accelerometers linked to them with option ac coupled iepe on c modules , my problem is the real-time application seems to work well even when power loss occurs it restarts without problem and the fpga written hard disk portable bin files very well, but without an accelerometer connected I get readings of low noise as soon as I connect an accelerometer to one of the outputs 10 it just goes to a fixed number (0.03125) as soon as you unplug it again He returned to readout noise, I ran a scan on the modules and get only a spike when I connect or disconnect the accelerometer, I tested voltage at the pins on the module and I get 22 volts CC which makes it more likely that the material is not the problem, but software is perhaps the cause to hang up, I join the project and files for your perusal. I also realized a new project which, in mode directly linked scan has the module entry in the shared variable and the scenerio even once again. Help would be appretiated.

  Thank you very much

  Jason

  Whren using waveform with the 9234 acquisition, we recommend the following FPGA and RT model.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/209114

  It can be extended as a datalogger with:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/6388

  or using shared variables combined with the analytical engine

  http://zone.NI.com/DevZone/CDA/tut/p/ID/9851

  The FPGA in all this, as well as the framework of RT have used successfully by 1000s of users.  I recommend giving these a try.

• Can we synchronize permission selected with the settings of operating system Notifications BB10 for our Application.

  Steps to follow:
  BB10 device--> settings--> Notifications--> Applications--> [name of your application]--> all alerts [Toggle button]

  I have an obligation to check whether or not 'All alerts' is allowed through settings when the application is running. To check if we can synchronize permission selected with the settings of operating system Notifications BB10 for my application. How to get javascript code if alerts permission is on / off, while the application is running.

  I tried adding the blackberry.system function and tried to hasPermission (blackberry.push) also, I can't determine if permission is allow / prohibit... Please suggest how to get that.

  I don't see a WebWorks API for this. If I expected to be anywhere, it's here:
  https://developer.BlackBerry.com/HTML5/APIs/beta/BlackBerry.notification.html#jbo1385148829097

  But it seems that this API has not been fully implemented; It may be useful to connect a developer Issue Tracker JIRA to get this feature added.

  At the same time, there is this API of Cascades that looks like what you're looking for:
  https://developer.BlackBerry.com/native/reference/Cascades/bb__platform__notificationapplicationsett...

  Write an extension for this feature should allow you to access this feature:
  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/template

  At the same time, a colleague is currently working on an extension that should open many features of Qt, and I think that the API above should be accessible through this extension. He must be released over the next week or two, so you can wait for that as well.

  EDIT: On this last point, see this extension which provides a mechanism for attaching in the majority of the Qt APIs.

  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/QtBridge

• Synchronize my Pocket PC Dell AXIM 5 with my desktop Dell computer by using the Windows Vista operating system

  After the widows Vista operating system upgrade my Dell AXIM 5 PC Pocket can be not sync with my office.  Old software active sync is not compatible with Windows Vista.  At my pocket PC eventually become outdated.

  Hello ariccia473,

  Click the link for Mobile synchronization and see if your Pocket Pc works with the Mobile Sync 6.1.
  http://www.Microsoft.com/windowsmobile/en-us/downloads/Microsoft/Device-Center-download.mspx

  If this isn't the case, then you will need to check with Dell and see if they can be of support.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• currently still have PP CS5.5 & want to install on another office, understand that I can only use one at a time. don't have a CD, can I get information from the current installation and a link to download PP CS5.5?

  currently still have PP CS5.5 & want to install on another office, understand that I can only use one at a time. don't have a CD, can I get information from the current installation and a link to download PP CS5.5?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.