I was selected in a survey of the forum!

Similar Questions

• Why omit Photoshop elements 14 for the selection of Color Variations in the color "adjust" knocked down? That was helpful. What do you suggest me to use in a place?

  Why omit Photoshop elements 14 for the selection of Color Variations in the color "adjust" knocked down? That was helpful. What do you suggest me to use in a place?

  If you have a copy of PES 11 or earlier version, you could install it and use it for this.

  You can apply here:

  Feature request/Bug Report Form

• Hi, my photoshop won't allow me to select layers with my mouse, I have to go to each individual layer on the side to select. On the computers at my school, I was always able to select a layer group to the right of the file I'm working on that. Having

  Hi, my photoshop won't allow me to select layers with my mouse, I have to go to each individual layer on the side to select. On the computers at my school, I was always able to select a layer group to the right of the file I'm working on that. Have to go to the layers panel and select each layer one is really long time and not effective - what do I do to fix this?

  Hi Cartere49372123,

  I hope you do well.

  Please check this link below and see if it helps

  http://www.photoshopessentials.com/basics/layer-shortcuts/

  Concerning

  Rohit

• Select several CSS classes simultaneously (was: how to select multiple css rules at the same time?)

  Hello!

  I have Dreamweaver 8

  I tried to select several css rules at the same time create a css stylesheet, but I don't know how to do it!

  This man do in this video at 03:00

  http://www.YouTube.com/watch?v=ZbQ3GTFC-O0

  Thank you!

  DW8 does not support the selection of several classes in the properties panel.  I'm sure that this feature appeared in the exit of the CS6.  Unless you upgrade to CC or CS6, you must do this manually in your code.

  Nancy O.

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• I was on facebook and remove an icon by using the right-click menu, but then all my photos and pictures of profile, could no longer be seen. I was able to view them in the browser, so it's something I've done in Firefox. How can I unlock a site? "

  I was on facebook and remove an icon by using the right-click menu, but then all my photos and pictures of profile, could no longer be seen. I was able to view them in the browser, so it's something I've done in Firefox. How can I unlock a site?

  If you select that right click menu context then you block all images from this area and not a specific image, so do not use that.

  • Check exceptions in tools > Options > content: Load Images > Exceptions (for example sphotos.ak.fbcdn.net)

  You can use the following steps to check if the images are blocked:

  • Open the web page that has the missing images in a browser tab.
  • Click the site favicon (How do I know if my connection to a Web site is secure?) on the left end of the address bar.
  • Click on the "More information" button to open the "Page Info" with the Security tab selected (also accessible via "tools > Page Info").
  • Go to the Media of the window tab "tools > Page Info.
  • Select the first link of the image and scroll down through the list with the arrow down.
  • If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

• Firefox 4.0 is having problems with checkboxes on gmail (do not recognize of when a conversation is selected); also has issues with the google maps search and facebook search.

  The boxes on gmail are not recognized by firefox, when you click on a message box and tries to remove the browser indicates that no message was selected.

  Looking for maps don't work at all.

  Search in facebook results, but clicking on any result will not redirect to you.

  Happens to me in Windows 7 and XP (3 different machines in total) and even executing FF in safe mode.

• When bookmarking a page, I get the full list of files in the drop-down list to select any folder in which the bookmark page. What you set for complete list of folders in the bookmarks falling?

  When bookmarking a page, I can not get the list of files to drop down to select any folder in which the bookmark page. The "folder:" bar was showing "Bookmarks Menu". The arrow on the bar descends 5 recent folders which pages were saved, but pop arrow to the right of the bar down opens just to show the three categories and the button "new folder". What you set for complete list of folders in the bookmarks falling?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  See also http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

• ProBook 4530 s: wi - di was good on win7, not on the win10 update, and not on "go back" win 7

  OK guys, this may be the wrong forum, here goes. Thanks in advance.

  Wi - Di was good during the original installation of win7pro 64-bit.

  Weekend Christmas 2015, about a month ago, I updated this laptop to win10.

  A few days ago, I needed to use the Wi - Di feature. He had disappeared.

  I did a 'return' to win 7, because less than a month later, just less than a month.

  Immediately after the round trip, Wi - Di was still missing. A Wi - Fi connection has always worked.

  After doing a lot of driver changes, proset wireless and changes software widi, nada.

  It's still complaining that the platform is not compatible & and/or other messages of "you can do that."

  Then... I think to uninstall all software related & pilot and repeating this part.

  But the win10 update changes something else that I'm missing, which causes this behavior?

  Someone had a similar problem and maybe a fix?

  Thanks for listening.

  Hi WAWood,

  Thanks for your suggestions. I had another conversation on the forum of intel who gave advice that helped me solve the problem. I write most of this and my answer in the hope of sparks of ideas and help others to a similar question.

  This is part of what was to aleki_intel:

  2. download and save download Intel® HD Graphics Driver for Windows file name * 7/8-64-bit: win64_152824.zip
  3. download and save download Intel® PROSet/Wireless Software and drivers for Windows 7 * file name: Wireless_18.21.0_s64.exe
  4. download and save the Download Intel® Wireless Display software for windows
  5. go in Control Panel, programs and features and uninstall "Intel® PROSet/Wireless Software", if it is installed. When prompted, choose the option "ignore parameters".
  6. also in programs and features, uninstall Intel® WiDi software.
  7. in the Panel configuration, Manager of devices, network adapters, right-click on the Intel® Centrino® Advanced - N 6230 and uninstall it. Make sure that you select the option 'delete the driver for this device '.
  8 restart the PC or search the hardware changes, check the Device Manager and if an older driver is detected and installed, repeat actions to uninstall and remove as well. Repeat this process until the operating system does not allow to delete the driver, or until the controller shows as unknown device.
  9. also in devices, Graphics Manager, uninstall the Intel® HD Graphics, also select the option 'delete the driver for this device '.
  10. restart or find the hardware changes, then uninstall and remove older versions of driver as you did for the wireless adapter.
  11 install the graphic driver Intel® downloaded before.
  12. install the driver Intel® Wireless. During the early stages of the PROSet/Wireless installation, make sure you customize the installation and install all components of 3 pilot because they improve the WiDi feature.
  13 install the Pro Intel® WiDi software.

  And my response to him:

  Hey aleki_intel,
  
  My WiDi works now. Woo - hoo! ..... Is there something in your message that was a clue of what actually went.
  Here is what has been:
  I could not the graphics driver to load. I was using the .exe version and it was bailing out without installing all components.
  
  You listed a .zip version. I gave a test, but he was still not completely happy.
  After more research my backup HARD drive, where I put older drivers, I found win64_15282.zip.
  It must have been those I've used originally when I bought the card wireless replacement for WiDi goes.
  Who went right and completed without incident. After that, everything went one-two-three.
  Thanks for the tip and the simplicity.

  Thank you.

• Detect which button was selected from a message popup dialog box

  I'm sure I've done this before and don't remember how I did it.

  I even searched the forum for messages but did not find any.

  I have a popup message asking if a number was on.

  It has two buttons "YES" & "

  I want to know which button has been selected in order to assign a pass/fail for the LED Test result.

  How to achieve this?

  R

  Step.Result.ButtonHit

  There will be 1 or 2 or more if you have more than 2 buttons

  Omar

• I was selected by Microsoft as a false Prize winner

  My name is Abdu Nadir Tutu, I am from Sudan. Last month, I received an email from Microsoft Corporation Center of Marketing in London in the United Kingdom where they congratulate me and informed me that my email address was selected as winner in the powerball free messaging of Microsoft Drawn organized by the center of marketing (Microsoft Game Studios) in London-United Kingdom (UK). They asked me to provide with personal information in order to guide me receive my prize, but the latter I realized it was a fake, then you might verfy that and let me know the truth. I'm keeping the original copy of the software of the exchange of letters.

  Best regards

  Abdu Nadir Tutu

  Khartoum / Sudan

  As you have now done, it was a scam. Please see:

  http://www.microsoft.com/en-gb/security/resources/microsoftlottery-whatis.aspx .

  The first thing to do is to try to stop the payments. If you have paid by credit card or gave them the card number, contact the emergency credit card company and ask for advice. Simialrly tell your bank if necessary.

  The rest of what it is based on the information you gave them - read it again and use your common sense to think how it could be used. For example, if you gave them no password, change emergency.

  You can also keep an eye on your bank accounts and accounts for any unusual activity.

  See also:

  Phishing: Frequently asked questions

  You / local law enforcement can also be able to advise you.

  I'm sorry that you have set up. I hope that get you it sorted soon.

• I get the error message "there was an error of analysis of the data on your system" when you try to use Windows Easy Transfer

  Original title: there was an error of analysis of the data on your system

  I get this error when trying to use Windows Easy Transfer to prepare to move from an XP PC to a Windows 7 PC. It passes through the part of the selection on where I later import files then says he is scanning the disc and fails with the above error.

  In the search for this error, I found information of 2007 could be be a nero problem AVI.  I don't have Nero installed and I can't find the log files in the directory MIGWIZ.

  It is a small (50 GB) HD who do not have much space available on it (I'm not in front of it now).  Is there a minimum amount of free space needed to run this executable? That is why it is a failure?

  Could there be other issues behind this failure?
  Thanks in advance

  Hello

  Follow these methods and check if that helps.

  Method 1:

  I suggest to download from the link provided below windows easy transfer tool and install it and then try to transfer the data back.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  Method 2:

  Refer to step 2 and step 4 from the link provided below:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

   

   

  Method 3:

  I recommend you to try different types of transfers using different media. You can also do a disk clean up of the Windows XP computer. Remove unwanted programs from the Windows XP computer. Do a disk clean, right click on the C drive, and then click Properties. Clean, then click on the disc.

  For use with different media windows easy transfer, you can click on this link for steps to follow:

   

  http://Windows.Microsoft.com/en-us/Windows7/transfer-files-and-settings-from-another-computer

   

  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

• Trying to install a new installation of win xp on a dell insp 700 m. all is well until you are ready to hit enter to select where to load windows. the keyboard freezes and crashes.

  win xp install

  Im trying to install a new install of win xp on a dell insp 700 m. all is well until you are ready to hit enter to select where to load windows. the keyboard freezes and crashes. It worked early, when I hit enter to launch the cd? any ideas? TX marty

  Thank you! I tried what you mentioned, nothing has worked... I plugged a usb keyboard and it works, so I'm starting to believe it could be a motherboard problem. I finally got windows xp pro installed, no conflicts in Device Manager, all the drivers are installed and now running smooth. I removed the keyboard, and re-set, all connections look good, but still not good. the synaptics keyboard works fine and both rt & lft click the buttons. I pulled the ram to inspect it, it's the right speed, ddr2700, and after running for an hour, it was cold to the touch! I'll try to get a new keyboard and replace it, their pretty good work, if still not good it becomes pieces on ebay... lol tx again... Marty

• Please select another location to extract the Setup program for:

  I was already accepted and ordered my playbook for free for several weeks, so I'm not terribly worried about the upcoming deadline... *.

  However, I am trying to sign my application and download it, so it will be available when playbooks are starting to be sold next month.

  I got my signature key and computer recorded, and everything worked perfectly the first time. I was pleasantly surprised. But the SDK, I had in January of obviously won't complie with the signing key, then I will try now to move from beta 1 to beta3

  However, the installation program itself for the WW SDK Beta3 seems to have issues... (I can't wait until hastily to all questions on the forum after I get installed)

  I was expected some compliing or test problems, but not a problem with the real install extraction itself.

  I downloaded the file (several times) to this URL:

  https://www.BlackBerry.com/downloads/contactFormPreload.do?code=DC727151E5D55DDE1E950767CF861CA5&DL=...

  Whenever I try to install it, I get the error message of InstallAnywhere: Please select another location to extract the Setup program for:

  Web search and the forums indicate that the download of the installer itself is corrupted and there is nothing I can do to solve.

  Therefore, I sit and I wait. Unless someone else wants to give me the file BlackBerryWebworksSDK which extract properly or give me some advice.

  Cliff

  * note: If something weird happen and my playbook NOT appear. I will be really pissed on faulty downloads and SDK buggy days to get any kind of response...

  FYI - it turns out that this problem is due to a bad ISP. I was down the packages and it was a story the download complete.

  Now, I'm trying to set up a new environment on another PC with a different ISP and I look at the Simulator are unable to install...

• ObjectListField selected lines show white on the Curve 8530

  I was wondering if anyone else has experienced this problem.  I looked through the forums, but couldn't find any information about it.  I use an ObjectListField, and when you scroll through the items, the line of the selected item becomes all white - if you do not see the text in the line.  Only, this seems to happen on the 8530 (on the Simulator and the physical device).  From a user point of view, it's extremely confusing.

  At first, I thought it could have been something that I was doing wrong, I had created a new class that inherited from the ObjectListField where I was Manager the drawListRow() method myself, but I ripped this custom class is instantiated and used an ObjectListField upward, with the same results described above.

  I know I can shoot myself the selected line in the drawListRow() method explicitly, but then I lose the native handling/styling for some other BlackBerry models - such as the nice blue gradient storm, "BOLD", etc...

  Any ideas on that?  Is this a known problem?  Is there one solution other than of coloring the line myself?

  Thank you in advance!

  T

  It seems unlikely that this would be a bug.

  Make sure that you have not replaced a method that you shouldn't have.

  Do you use some kind of custom on the 8530 theme?