ProBook 4530 s: wi - di was good on win7, not on the win10 update, and not on "go back" win 7

Similar Questions

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  I have problems with a client of VMware image-level in an EMC Avamar backup.  So far, we have not been able to find information about this message in the backup log file.  It is originally the backup to take a very long period of time (on average 10-11 hours).

  2014-02-28 14:20:57 avvcbimage < 14681 > Info: change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  We cannot determine why CBT is "denied".  Has anyone here run across this issue before or seen any other type of backup VMware image have denied CBT?

  Everything I checked watch that CBT is successfully activated since the file vmx for the customer to the Avamar config.

  ESXi host is Enterprise Plus 4.1.0 260247

  After spending some time on this issue, the ultimate resolution withdrew the Avamar vm and then add it again.  After that, CBT began to work properly.  It seems that there is a parameter that has been 'stuck' pertaining to this virtual machine that wasn't behaving properly.

• I have Adobe Acrobat XI Pro on my computer and it works fine but now received a new computer (MAC) and want to install Adobe Acrobat Pro XI. I have the CD but no serial number. I think it was an upgrade. I have the client of # and the serial numbers for b

  I have Adobe Acrobat XI Pro on my computer and it works fine but now received a new computer (MAC) and want to install Adobe Acrobat Pro XI. I have the CD but no serial number. I think it was an upgrade. I have the client of # and the serial numbers for Adobe Standard 8 and 9 upgrade.

  Your serial number appears on your account page?

  https://www.Adobe.com/account.html . for numbers on your Adobe page... or

  Lost serial number http://helpx.adobe.com/x-productkb/global/find-serial-number.html

• I was using my Ipad air then the screen freez and turn off itself until now

  Please I need your help, my Ipad air I was using it and all of a sudden the screen freezes and cut in itself can help me?

  Force the restart of the unit (does not affect the settings/data/music/apps/etc)

  1. press and hold the sleep/wake button

  2. press and hold the Home button

  3. hold both buttons until the screen turns off, then back on with the Apple logo.

  See also this:

  If your iPhone, iPad or iPod touch does not respond or won't turn on - Apple Support

• my computer was obsolete seriously hurt, after downloading the first update to it crashed.

  the computer was not connected to the internet at about 6-7 years and when I finally hooked it up it worked very well was extremely happy until I tried to install my anti-virus if necessary. how he told me that I needed and the most recent version of microsoft service pack, mine was horribly outdated. I then clicked on update of windows and followed the instructions to a "T". how when the resart now or later came after you had finally download service Pack2 (which is no longer supported, but he still told me to download), I clicked restart now how it did as it was assumed, but when he started up everything was gone. programs, whatever it might be saved, * even the Start button and other options which will usually appear at the bottom of the screen disappeared. and I can't do but turning power by pressing the power button on and off. im getting seriously annoyed with my computer, correction with period of windows. and I must say the $60 fee to contact you to solve my problem infact your caused service does not me cheered in any way, shape, or form. slowly getting to the point of frustration in which breaking my piece of * and buy an Apple will actually give me more satisfaction, then get mine fixed. Please for the love of God, help me clean up the mess you made of my computer. -Greg Leach (seriously upset customer)

  Hi GregLeach,

  · What is the number and the model of the computer?

  · The operating system was preinstalled on the computer?

  · You have the Setup for the operating system disk?

  Follow the steps in the link below and check if this may help: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

• How to remove the "Firefox updated" and come back as it was before I upgraded?

  I don't want to change my security settings to allow Firefox to connect to the internet. I was perfectly happy with the Status Quo. Took a chance on the 'upgrade' and now I regret it! Why make my life miserable, trying to improve my life... never happened! Please, change it back!

  Hi, this article - install an older version of Firefox should help you, but please work/read through it carefully before the decommissioning, and note that an older version may put your safety at risk.

  Hope that answers your question.

• I was sent here to discover if the Acer Aspire switch Alpha can if run win 10 32-bit

  Has anyone used Acer Aspire Alphas with 32-bit Windows 10 switch successfully? We were asked to change the operating system to a customer, and I wanted to know its possible before starting.

  On the acer switch 10, it has a 64-bit processor, but uses 32-bit windows, so I know not 32-bit windows can run with 63 - bit, but it may be unstable, because it was not desinged for this material. also, some drivers are no longer available for the 64-bit. In conclusion, you can install 32-bit windows on 64-bit computers, but beware of pilots not taken in charge and bugginess.

• Hi, FCP my, library, was damaged, i, open, drank of the PCF, library and, he, worked, well, then, my, question is, which, do, with, the, old, library,?, is, again, I, working, throughout, with, the, a, used?, or, should, I, open, Abu, one, i used, each, t

  Hi, my, library, has been damaged, so I have, open, a, FCP BU library and this worked well, so my, question, is, what, do, with, the, old, library,?, is, always, workin g throughout, with, a, I have used?, or, well, I have, open, BU, one, i, used, each, times, I, open, my, project?

  Rename your backup library in order to take account of the original, and then delete the original.

  FYI: Identification will facilitate a slightly different name.

  Al

• ProBook 4530 s: HP-ProBook-4530s-Windows-10-x32-hotkeys

  Hello everyone, I have 32 bit HP ProBook 4530 s, recently I installed Windows 10 but not all access keys work (for the exodus, screen change light and etc..). Please link good Hot Key Driver for Windows 10. Thank you.

  @G_Balakhadze: the problem is, there is no HP Win10 driver for your laptop.  The last HP has is Win8.1.

  I linked the page drivers: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5060881

  But, as you can see, there is no keyboard driver, in itself.

  You can try to use Windows updates to find the drivers from Microsoft deposits for your device: http://support.hp.com/us-en/document/c03330139
  
  If that does not do anything, you should read this another link: http://support.hp.com/us-en/product/HP-Pavilion-dv6-6000-Entertainment-Notebook-PC-series/5048664/model/5077076/document/c04758308/
  
  If Windows Update doesn't give new drivers, you can pursue alternative which are described in the linked Microsoft Windows Insider community thread: http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_devices/how-to-install-and-update-drivers-in-windows-10/a97bbbd1-9973-4d66-9a5b-291300006293
  
  If you then run into trouble, install the drivers through Windows Update, you can try to use of Microsoft Windows Update Troubleshooter: http://windows.microsoft.com/en-us/windows7/open-the-windows-update-troubleshooter
  
  Good luck

• change startup for probook 4530 sequence s

  I probook 4530 laptop s... I want to change the startup through utility and Advanced tab startup sequence (I mean the blue screen... not start hp software) when I press f1 it's see the hp system info... F2 is show system options diagnostic... F7 is to see the spare key hp window...  F9 is showing boot device options... F10 hp biosetup (useless) showcase... F8 show nothing. Delete the show noting... ESC show all this key and what do... How can I get into the bios utility to change the boot priority? .. which key can I press to enter the bios setup utlity?

  Product no. A1E83EA #ABV

  Installed windows 7 ultimate OS

  Hello

  Press F10 to enter the Bios.

  Go to the system configuration and choose Boot Options.

  Be sure to save the new settings.

• ProBook 4530 s: win 10 results ProBook s 4530 in no Wi - Fi

  Good afternoon, all!

  I tried to upgrade a ProBook s 4530 on Windows 10.  Everything looks good, until I try to connect to Wi - Fi.  The widget simply says 'Impossible to connect wireless' and there is no showing why Event Viewer entry.

  The wired adapter works fine.  They both have the Realtek card.  I tried the driver Windows 8.1 without success.  The hard switch is activated and the LED is white.  The BIOS is the latest & greatest.  Also triple-checked the router password without the THST wire - OK, too!

  Without indication of the BONE as to what is happening, I may restore Win 7 and either start again or give up.  I have an other s I tried to level; the without wire was fine, but there was something in the services that refresh the office and break the RDP and VPN connections.  So I'm a little worried that these laptops are not always stretch to win 10.

  Tips to win 10 to run on this?

  Thanks for all the research!

  Gregg

  Hello:

  If your laptop is RTL8188CE wireless card, it does not work on W10.

  I didn't even know that there was a W8.1 driver for him.  I thought that this card made up to a maximum of W8.

  Why upgrade to the Intel card wlan card does not appear in the maintenance manual... Chapter 3, page 25.

  That should work well on W10.  Not only that, but then you get a dual band with bluetooth card.

  Intel Centrino® Advanced-N 6230 HP Part # 636672-001

  The only caution is you must get this card, and it must have the HP part # on it or it will not work because of the white list of BIOS HP has on these models.

  You should be able to find opportunity but in State tested and functional at a great price on eBay by questioning by the part number.

  I'll make sure that you see the HP part number indicated for the item in the picture list.

• To receive a replacement for notebook Probook 4530 s guarantee with the following defects?

  Hello

  Operating system: Windows 7 Home Premium 64-bit

  With about a month to guarantee rest yet, I was wondering if I could get a replacement for laptop to my HP ProBook 4530 s.

  When I got it, it's in very good condition, after almost a year of use, the optical dvd player case is sometimes a bit loose and one of the keys on the keyboard relaxes and I would have to fix it and hang it in the keyboard frequently. In addition, sometimes one or two of the USB Hubs would not read my flash drive but other ports would be strange. While this is happening in only a few flash drives and all 4 USB Hubs are still functional. Finally, sometimes my laptop keyboard may lock up randomly but my mouse pad would continue to operate, which means that I have to restart the laptop to make it work again. Even after installing the updates and even Flash my BIOS, I always have this problem from time to time during the execution of certain applications, including the computer games from Valve, but never expericened before running programs. This problem would happen frequently as well. I was wondering if all these problems would be enough to get a replacement. Thank you.

  Kind regards

  Calvin N.

  Hello

  Please contact HP as soon as POSSIBLE, should be an office very close to you in the following lists:

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html

  http://WWW8.HP.com/au/en/contact-HP/contact.html

  Good luck.

• ProBook 4530 s: computer laptop suddenly notworking

  Hello

  I'm having a problem with my HP ProBook 4530 s... I was experimenting with the voice of his system and it can work in my software JARVIS. All of a sudden after I restarted my computer. the boimetric function not working anymore and the screen goes dim gloss and I cannot adjust by pressing fn + F3, whenever it gets to the opening of session and password screen / biometric. the dark screen only happens when im already in the logon screen, but the display is ok on the bios and the windows loading screen. No audio device is too projected. It seems that everybody has been affected, and I can't even connect to the internet.  I tried to play a game. Games works but not display sound and very dark. to add to the details - sometimes the screen is ok if I leave him alone in the login screen, but after I move the mouse or press any key or touch the screen becomes dim new (like 70% Sun). Help, please.

  Finally managed to do work. It turns out that I disabled something unknowingly perhaps, services or something like that, silly me. I tried changing the msconfig startup options to restart normally, and everything goes back to normal. hope that HRT may be of some help to others. Good luck

• HP Probook 4530 s: how much time disk disinfectant and will secure erase?

  I have HP probook 4530 s ci5

  have a 750 GB hard drive (HDD) drive.

  Hard drive is Hitachi (HTS727575A9E364)

  I need my laptop to someone for a few days, so I need to make sure that my data is definitely missing.

  I can use the disk Sanitizer or present secure erase option in the BIOS. But I don't know how long it will take?

  Can someone please tell me which disk-disinfectant time and secure erase option will take to a passage?

  Hi all

  I just went ahead and did it. So for other people like me looking for the answer to this question, I will share my experience.

  When I clicked on the option of disk Sanitizer, he gave me several choices like, 1 pass, optimum, gutmen and custom. I chose optimum, it is has had warned only that data will be permanently erased, there was no estimate of the time, I had to do, I did. After 22-23 hours of waiting, he did. And the optimum had 6 cycles of option. He showed the result below.