I was trying to read a sd card in my phone opera and it stop my computer windows vista laptop.

Similar Questions

• Can restore my computer-how I restore my computer (Windows Vista Premium) back in the day, it was brand new?

  How can I restore my computer (Windows Vista Premium) back in the day, it was brand new?  I want to clean the top/everything, yes everything!    Help! PLEASE

  Hello

  Here are the different ways to reinstall Vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I download music from an SD card on my computer (window Vista premium 2007 edition)

  I have a Verizon HTC crush.  I am trying to download music from the SD card to my PC (Windows Vista Premium 2007

  Hello

  I suggest you try the steps from the following link:

  Copy music, photos and videos to a mobile device (applies to Windows Vista)
  http://Windows.Microsoft.com/en-us/Windows7/copy-videos-pictures-and-music-to-a-portable-device

• Windows Media Player on my Dell Windows Vista laptop cannot read the old files mp3 (2009 and past).

  In the past (2009 and prior), Windows Media Player has been able to play these MP3 files (consisting of language foreign podcasts). However, after all the updates

  Microsoft, there is now NO SOUND when Windows Player running the old mp3 files. The reader can read the new mp3 files from podcast language site, however, there is no sound when he plays the old mp3 files. Even after you download the codec from CNET files, there still no sound when Windows Player running the old mp3 files. However, Itunes is able to read these files. What should I do to get Windows Player on my Dell Vista laptop to play these old mp3 files? Thanks for any help.

  Hello

  I suggest you to check the below link that talks about the same kind of problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/no-sound-in-Windows-Media-Player-110600218111-only/5324408a-4a5f-4ACC-88a3-65871b11e124

• I am trying to access my hard drive for some records and my file photo in windows vista after it has been formatted.

  My laptop after runing battery accident, I cannot restore and re-installed was the only solution, I thought I had backup all files, but my photo files is missing and an other files that were in my office. I need assistance to access the hard drive if possible, I said it can be done.

  If you formatted the drive and reinstalled Vista, data is almost certainly lost to conventional methods of recovery...

  You can try this program:

  http://www.SnapFiles.com/get/Recuva.html

  Recuva is a file undeletion tool that allows you to analyze your hard drives or media cards for files that have been deleted or formatted. It presents you a list of files that have been found, as well as an assessment of their potential for recovery, a preview option, and a hex viewer to inspect the content. You can limit your search to files of a certain type (e.g. images, audio etc.) and choose between a quick and a thorough analysis approach. The program also includes a secure deletion option that allows you to permanently delete files that were found while parsing, to avoid any future recoveries.

  If the above does not resolve the problem, you will need to contact the Date recovery Experts.
  Be warned: they are very $$$

  See you soon.

  Mick Murphy - Microsoft partner

• I AM TRYING TO INSTALL ADOBE PHOTOSHOP ELEMENT 10, BUT IT IS A NOTE SAYING TO GET ADOBE SUPPORT ADVISOR, I TRIED THEY SAY IS NO LONGER SUPPORTED, BOUGHT THE LICENSE AND A NEW APPLE COMPUTER AND THE NEED TO INSTALL

  I AM TRYING TO INSTALL ADOBE PHOTOSHOP ELEMENT 10 IN A NEW APPLE COMPUTER, BUT THERE IS A NOTE SAYING THAT THE INSTALATION FAILED TO INITIALIZE, AND THAT I SHOULD DOWNLOAD ADOBE SUPPORT ADVISOR TO DETECT THE PROBLEM.  I DID IT, BUT HE SAYS THAT IT IS HAS BEEN DISCONTINUED.

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• I go to school and my problem is when I try to go to the documents, that I can't. The academic use password window, I tried to download, but still I can't. I have a computer Windows Vista what should I do if I can finish my assignments?

  I can not download the documents from my school. I tried to download, but I still get nothing. Please help me.

  I think you need to talk to someone at the school.  We do not know what their needs are and what you need to do.

• How can I reset my computer Windows Vista to factory default. Including deleting everything which was not there, out of the factory.

  I want to learn to back when I bought it. I know older systems have so I thought it was her. Ive had it worked on and everything I want to just go back to when I got it it please.

  Hello

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I am trying to download Firefox - click on the download button and nothing happens. Using Windows vista. Any ideas. Receive no error message or pop-up blocks.

  The details are in the question.

  Try to download the new version and install it from:

  http://www.Mozilla.org/en-us/Firefox/all.html

  See also: Installation of Firefox on Windows

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• keep from my computer, windows vista safe mode! How can I stop this? Ive tried everything...

  Aspire E380 victory Home premium

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• Tried to import pictures. Will not stop or go away and I can't turn off my laptop

  I was importing pictures from a SD card to my Macbook pro and tried to do them all at once. There were about 700 pictures. Once, I moved their this tab below that presented themselves. After about 5 minutes of nothing don't be going on I tried again and now there are 2. I waited about an hour and nothing changed so I pressed X to stop the copy, and now it won't go away. He won't let me leave and because it will not stop I can't turn off my computer. What should I do to get rid of this.

  

  The easy way to recover is to hold down the power button until it turns off the MacBook Pro. Press the power button to restart the MacBook Pro.

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I can't read a disk in my computor what can happen in the properties of windows cannot load the driver for this hardware device, the driver may be corrupted or missing (code 39) can anyone help

  I went to put in a cd to look and he wanted to get on-screen computor Ive seen it before, but for some reason any it stoped working. I went on a local drive Q and click with the right button to open it, but then it reads that q:\ is not accessible. access denied

  Hello

  1. on what application you are trying to read the disc?
  2. don't you make changes to your computer because of which the question began?
  3. is the relevant question to a specific application or a disk?
  4. what operating system is installed on your computer?

  There are many causes of Code 39 errors:
   
  * A required device driver is missing.
  * A required binary file is corrupted.
  * There is a problem with the file I/O process.
  * A pilot that refers to an entry point in another binary file cannot load.

  If you use Windows 7, we will first open the convenience store hardware and devices to perform automatic troubleshooting services.

  You can also click "Run now" to this article and check if this is useful.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• When I try to unzip a file I have by default Adobe Reader, which is the wrong program. I have Windows Vista Home Premium. I need to download a software to compress and decompress compressed files?

  I run Windows Office 2007. And find that when trying to extract a .zip file, I get Adobe Reader who tells me to can not read the file (of course). So, where's the decompression of files program. I need to download one?

  Hello

  1st 3 here should fix you up

  How to restore Vista built-in ZIP files Support
  http://www.Vistax64.com/tutorials/65254-zip-file-support-restore.html
  How to enable or disable the files compressed in Vista
  http://www.Vistax64.com/tutorials/93827-zip-file-compressed-folders.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html

  ---------------------------------

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

  How to restore files ZIP integrated into Vista Supporthttp://www.vistax64.com/tutorials/65254-zip-file-support-restore.htmlHow to enable or disable the compressed foldershttp://www.vistax64.com/tutorials/93827-zip-file-compressed-folders.html
  Restore and return the file Association in Windows Vista if Original
  http://www.mydigitallife.info/2008/06/22/restore-and-reset-file-association-in-Windows-Vista-back-to-original-default/

  Reset and Fix Broken Windows Vista file Ext and Type Associations (include EXE, COM, SYS, ZIP, LNK,
  Folder, drive)
  http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-Windows-Vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I was checking my installed updates and came across a file that failed to install. It was the Cumulative security for Windows Vista (KB976325) updates

  I was checking the updates installed and came across this:

  Windows Vista cannot install cumulative security updates

  Error: 80200010

  Give this triple McAfee fix, a tourbillon: http://service.mcafee.com/FAQDocument.aspx?id=TS100507 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft