I wonder why... (New sequence set in place)
In view of the excellent ability of CS5 in order to 'Create a corresponding sequence' to an element when it is moved on the new icon... I wonder why we're still forced to go through the process of setting up a sequence when you start a new project?
(I'm aware that you can also create and use a custom put in place at this stage).
Would be nice if that could be possibly short-circuited directly in the application.
Thank you.
will I have a report of weirdness to cite it?
Tags: Premiere
Similar Questions
-
Why new tabs do not place the cursor in the url as before?
yesterday, I click New tab and the tab page comes up with the emphasis placed in the URL bar Highlighter and all I have to do is enter the address I want to search or go to
Today, the focus ends up with the cursor at the end of the address in the URL bar... NOT GOOD!Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, perhaps an addon intrudes here...
-
Newbie question - how to set up the new sequence of 1280 x 720?
Need to do a video class for Youtube & PP project still to learn.
Read YT vid is 16:9 ratio, and a common frame size is 1280 x 720, but having trouble setting up of work area.
for example. New sequence / select Widescreen 48 kHz, which is the format of the pixels is D1/DV... Image 16:9 720 poster size h, (where h is height right?... but no width)
Once created, I look under settings of sequence and this watch frame size 720 Horiz and 480 green, gray & unchangable. Like all other fields.
That's happened? I don't understand... How can I get 1280 x 720?
Usually I drop a video on a new timeline, makes - me if I want to change the setting to match, but I have vids of 1280 x 720 for this project, some are bigger, some are vertical phone mobile videos. I tried to drop a jpg 1280 x 720 on a new timeline, but did not get this dialog box.
I don't have the time to do a whole bunch of tutorials at the moment, hope someone can help make me it past this issue.
Thank you
You need to fix CS6 first missing sequence settings:
Features and sequence presets missing | Adobe Premiere Pro CS6, first Pro CC
Once you have done this, you can configure your sequence.
-
New sequence - drag the icon from the dialog box new sequence
I work with AVCHD shot in 1080 30 p.
If I create a new sequence by using the 1080 p AVCHD 30 preset, I get a red line at the top of my sequence indicating that there could be problems that made reading would set.
If I create a new seqence dragging a clip MTS in the folder of a new element, there is a yellow line at the top of the sequence, indicating that there is no rendering required.
I checked the settings of the sequence. As expected, the sequence created through the sequence settings dialog box is on "square pixel 1080 p AVCHD" in Edit Mode and the "no fields (progressive scan)" for the fields. But the sequence created via the shortcut drag-and - déposer is set to the Edit Mode "Desktop" and the "upper field first" setting for the fields. The editing Mode and settings fields are the only differences between the two sequences.
I use a Panasonic AG-HMC150 and shooting at 1080 30 p. The AG-HMC150 uses the AVCHD format and the MTS file extension. My system does not have a taken Adobe supported GPU. I am sure I used the setting of 1920 x 1080/30 p on the camcorder.
I also shot clips by using the 60 720 p setting and the same thing happens. The sequencing method drag - déposer creates sequences on the Office and upper field first.
If my clips were somehow 30i, the method drag - déposer should create a sequence with "square pixel 1080 p AVCHD" in Edit Mode. But in both cases (1080 30 p and 720 p 60) Editing Mode is the office.
Jeff Sengstack
But who can ask the question: why the Pro P bad interprets AVCHD video?
This is a bug - pure and simple. There is no other reason than that. This exists in CS5 and CS5.5 (assuming that you are referring to AVCHD 1080 p 30). I've not seen it work its interpretation as a progesive - with 720 p 60 - for me, so I'll take your word on that.
Report it here: Adobe feature request/Bug Report Form
In the meantime, just as progressive footage after importation and continue as you would otherwise.
-
Beginner frame size question-new sequence is not what says PP
I want to crop 30px from the bottom of a 576 x 352 movie. If only I could drag a marquee selection autour with a crop tool and save it would be perfect.
All that I know to do is create a new sequence with the new frame size 576 x 322, then copy the old film in it. I have create a new sequence of Custom, and PP dialog box shows that it has the desired size (scrn bottom CAP), but it isn't... its actually much smaller and the most cultivated in all parts. When I copy in the 576 x 352 images in to the new sequence, the image size is not yet near. What I am doing wrong?
PP CS6 mac
The spacing in pixels between these two screens do not match... are the pixels of your film footage square pixels, or more narrow les.909? Make sure your settings to completely sequence corresponding to the size of the image file - and all other things except to change the dimension of height. So remember to slide images of this sequence, using 'set to the size of the image' and see if it works better.
Neil
-
new sequence of the clip adobe cc 2015
front of "new sequence of the clip" video using the new sequence could open their own values. Now, I can only open a single channel audio sequence with this method. I wonder how I can like you used to?
Yes but there is a difference in the new and new sequence of the clip.
-
First, I'm joining the forum with a question CS4 and CS5 Suite for Mac. Can someone tell me why it is NOT a place to submit a question as it is here?
Creative Suites Mac forum seems to be closed, so moved that Creative Suites Windows the Forum of Creative Suites "base".
Then... Post your question and someone may be able to help... is your question about the installation of the old software on a new Mac?
IF El Capitan Mac read below
CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan
-which means you are trying to use CS6 and earlier at YOUR risk of having problems
-You can get CS6 and previous programs to install and run, or you can not (some do, some don't)
-IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)
This information is a MUST to install old programs on Mac El Capitan
-You can't get the same error message, but here are some links that CAN help with old programs
-Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
-the guardian https://support.apple.com/en-au/HT202491
-
I want to talk to someone to turn off my 11 elements of Photoshop which is on my new computer in 2 places! Help!
To disable, you must open the application and select help-> Deactivate. If you can't do this for some reason, you need to contact Adobe Support by chat and request their assistance. They are not generally available on weekends.
To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.Serial number and activation support (non - CC) chat
https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp -
Hello
I have a question I make videos of product for a company that they would do that to me in a 16:9 format and in HD. Because they do not know on which channels they want to publish, but it is certain that they will publish on youtube I wanted to do it in the settings HDV and DVCPRO HD 720 p 24 or even 1080 p 24. I bought the license to create online and for some reason that I don't have the option at the beginning when I create a new project to change the settings for the sequence. They do not appear, and then I can not change. Guys do you have any idea what can be done in order to access this setting before the project opens in the end?
I'd appreciate strongly any help in this matter!
See you soon,.
Mascha
This option is no longer available in the current versions of first. Once you click OK in the new project dialog box, you can then create some sequences that you like new sequence in the dialog box. You can also return to any order and change them through the sequence settings.
-
Create new sequences of the Razor tool
Hello:
I have a video of 2 hours of questions / answers in a forum. I want this divided into 8 sessions of 15 minutes, each representing a different question. I can cut the clip using the razor tool, but I don't see how to take each piece of 15 minutes and place it on a new sequence, thus creating 8 sequences. I then export each 8 sequence regardless as a flash video, creating 8 videos flash can I insert into Dreamweaver.
I tried to copy / paste, drag, but the sections cut do not seem to want to leave the original sequence that I imported.
Ideas?
Kind regards
Rich Locus
Create a copy of your full length sequence.
Rename the duplicate sequence "Session 1" (or something similar)
Edit this new sequence to include only the first session.
Create another copy of your full length sequence.
Rename the duplicate sequence "Session 2" (or something similar)
Edit this new sequence to include only the second session.
Repeat steps.
Notes:
Don't forget to work on duplicates, and then save your cutting the length.
Create a duplicate sequence by selecting
in the project Panel and then Ctrl + click - move.
-
First Pro CC does not create a new sequence with a new project
I'm sure I must be missing something, but when I create a new project in first Pro CC, it does not automatically create a new sequence.
In CS6, create a new project would cause a list of sequence presets, and then create a sequence is empty for you.
In CC, once you have created a project, you end up looking at an empty timeline. You then go to the file, new, sequence and it do.
Looks like a strange step to include, no?
Is there a setting that I have not found so made CC to create new projects with a sequence like CS6?
Yes, as Jim mentioned, there are other ways to create a sequence. For example, simply import your video footage and then with a clip selected, choose file > New > sequence of the Clip. Or in the project Panel, drag an item to a new item icon. Much easier create the sequence of way, rather than by reading all the parameters in the dialog box new sequence and try to understand which attributes correspond to the media they work with.
-
Hi, I wonder why you work on different sequences and then link them together in the timeline? It's just for long videos more than 10 minutes? Why can't you just edit the entire movie in one sequence? I wondered as I need to use first without losing too much time.
Thank you
Ed
Hello
Let's say you have 8 strips of mini DV an hour with a video camera, which shot 14 days of any event. You want to make a DVD... then you can 1-2 hours of a final product... on the DVD.
So, you have to edit footage from 8 hours to 1.5 hours down lets say... using the best of the videos and tell some type of "story"...
I could make a sequence for each band (8). .more a sequence for a first installation or final cut...
Then I could use each sequence "timeline" to slide to the bottom of the source monitor images useful. (in the pro world they would be called 'prints' by the Director)
Once you have all of the good things of the 8 different bands on the timeline, you can begin to copy/paste or whatever the sequence of rough cut / final.
Keep it all organized... like having a "workflow" that lends itself to obtain the final product...
Stem
-
Why new browsers don't support and play *.mid files?
Many years ago win XP and IE6, we did can set music *.mid in the background of the pages and play. Why new browsers don't do? the big news of the midi files is a tiny size of them. I searched in google, and midi support is attached to the HTML5. but the Google Chrome taking supported almost all of HTML5, don't play *.mid files. What means?
Hello!
In Firefox, you will need the QuickTime plugin; See the article "Using the plugin to read QuickTime audio and video" http://mzl.la/1xKrVrv but: Mozilla plans to abandon support for all plugins NPAPI (with the exception of Flash) in March 2017, when Firefox version 52 is released.
What about Windows: by default, Windows Media Player uses the standard audio device that uses your system. You could post a question on the support forum for Microsoft, although (similar to the support forum):
answers.microsoft.com/en-US/windows/forum/windows_10 -
How to use the new sequence when it is reached its maxvalue in PL SQL code
Hello
Currently, I am the filling of a number of unique product in a table column by using a call sequence to generate the new number. For different products, I have different sequences and in my PL SQL code usiing IF... Else block I fill the serial number for different products. For a sequence more selling product, we reach a Max value in the production in one month and ensure that the application continues to run properly for the different end-users without getting any error on their screens, I want my code to automatically switch to the new sequence. I just need to add another if condition but my problem is how to find precisely when the maximum value is reached in old sequence.
As the call to the old sequence can occur in different sessions he could be inconsistency and can be found in the error. My new sequence value must begin with AV1000. Please suggest.
My old sequence look like this:
SEQUENCE of Prd
INCREMENT BY 1
START BY AS1000
MAXVALUE AS9999
MINVALUE AS1000
NOCYCLE CYCLE
CACHE 2
Order Yes;
Published by: user11695088 on July 15, 2009 12:14 AMCatch the exception and use your new sequence. But somehow, I'm not like your alternative approach.
SQL> set line 300 SQL> set pages 50000 SQL> set serveroutput on SQL> create sequence testing_seq increment by 1 start with 1 maxvalue 3 2 / Sequence created. SQL> SQL> create or replace procedure test_seq_proc(p_seq out number) 2 is 3 begin 4 select testing_seq.nextval 5 into p_seq 6 from dual; 7 -- 8 dbms_output.put_line(p_seq); 9 -- 10 end; 11 / Procedure created. SQL> declare v_out number; 2 begin 3 test_seq_proc(v_out); 4 end; 5 / 1 PL/SQL procedure successfully completed. SQL> / 2 PL/SQL procedure successfully completed. SQL> / 3 PL/SQL procedure successfully completed. SQL> / declare v_out number; * ERROR at line 1: ORA-08004: sequence TESTING_SEQ.NEXTVAL exceeds MAXVALUE and cannot be instantiated ORA-06512: at "ETL_ADMIN.TEST_SEQ_PROC", line 4 ORA-06512: at line 3 SQL>
See you soon
Sarma. -
I would like to add local or drop some variables global to all the new sequence files I create. I was hoping that I could simply add the variable to the process template and make it appear whenever I created a new sequence or in any order who have used this process model, but it doesn't seem to work.
Does anyone know a way to do what I'm doing?
Thank you.
Skeptic,
If you use TestStand 4.0 and later versions, you can create a sequence model by adding a sequence selected in the models pane of the TestStand sequence editor. You can then use this template to create all your future movies. Once you configure the model you like you will be easy to reuse this sequence skeleton again.
Maybe you are looking for
-
Today the bottom half of my Firefox browser just drew until halfway on my screen and will not maximize again. I tried to take Windows back to point 2 days ago, but the problem remains.
-
Bluescreen download McAfee Total Protection
Hello Can someone please help - I just spent 5 1/2 hours chatting with McAfee, then more with Microsoft but not just anywhere. I uninstalled and I try to reinstall McAfee Total Protection. However, when you try to download the software, I get the blu
-
your version of sun java Scheduler is not compatible with this version of windows
Whenever I turn on my computer this message comes up (your version of sun java Scheduler is not compatible with this version of windows). I went to the java website and they say that I have the latest version of java, and my computer is slow when you
-
Can re above, anyone help? Thank you * original title - I'm having problems with "the user profile service has no logon. Unable to load the user profile"in order to resolve this that I have to sign as an administrator, but I forgot my password. What
-
Why are these networks 0033, livedoor-web, mobilepoint shows on my wireless network connection? At Microsoft this downloaded without my knowledge in my laptop in the network connection and the internet? Are these safe to use and that they cause to sl