I would appreciate your help with this

Similar Questions

• Here's my problem: every time I type an e-mail and I hit the letter "T", my computer opens a new tab. How can I disable this "T" by typing the problem? I would appreciate your help. Thanks, Dan

  Whenever I type the letter "T", while sending an email, it causes my computer to open a new tab/page.

  It's on a laptop? It is the touchpad at the origin of the problem. Go to the properties of the touchpad and disable the zoom in/out function. Basically, the left side of the touchpad is configured as the right side, except instead of scrolling up and down, it is set to follow up to zoom in and zoom out. Whenever you place your Palm and you get any contact on the touchpad, keyboard recorded pressures on the CTRL (this is how zoom works). Microsoft® Security MVP, 2004-2009

• urgent vMA, would appreciate your help VCAP is tomorrow.

  
  

  
  

  Hi all

  
  

  I would be eternally grateful if anyone has any advice on this problem.  I have installed and configured a new instance of the VMAs, he added on the field, added target servers, however I do seem to be able to run anything against the hosts resxtop for example.  He not seem not serious if I run it with information of local identification or AD nada! prompt bounces just to me.  I know that the credentials are correct for what I tried, I confirmed the time system, tried the two keyboard American/UK, rebooted the box I know DNS is ok and we tried the intellectual property without worrying.  Its a long shot, but if someone could take a look at the attached screen shot and let me know if I something stupid I would be grateful.  I really want to nail this as its in my VCAP tomorrow, I feel like I know the relevant controls but want to actually test it.

  
  

  You can try this sudo mv/usr/lib/vmware-rcli/lib / / usr/lib/vmware, then resxtop of fire.

• Dialog box that says ' Creative Cloud Installer wants to make changes. Type your password for this purpose"- I type my password for Adobe ID (creative cloud), but it will not accept it. who should I go for help with this query?

  Dialog box that says ' Creative Cloud Installer wants to make changes. Type your password for this purpose"- I type my password for Adobe ID (creative cloud), but it will not accept it. who should I go for help with this query?

  It does not ask the cloud your computer admin password password!

• My screen side down. I need to turn right to the top. everything works fine. I need to know how to revere the screen where it appears correctly and now the down side. I really appreciate your help.

  My laptop screen is displayed upside down. I need to know how to turn right to the top. Thank you for your help in this matter.

  High graphics most of range, the cards are equipped with display rotation built in and adjustable via display properties or via the display properties of the display icon in the Notification area (to the left of the system clock).  It is a nice feature if you want to read things more like a book on your laptop, etc.

  Some examples would be ATI, NVIDIA, Intel, Matrox, S3, XGI.  These adapters can be integrated into your system, and not always his own card.

  This phenomenon of rotation screen sometimes inadvertently some keystrokes (the cat walked on my keyboard).

  Pressing on the keys Ctrl-Alt top/arrow down arrow rotates screen 90 degrees at a time for some graphics (like NVIDIA) cards

  If this does not work, we will need to know your system brand and model and see if we can look at the rotating screen for you shortcut keys.

  Do, or do not. There is no test.

  Someone please tell me how to make figgy pudding like these kids keep saying they won't until they get some.

  I decided to implement the points for a new puppy instead of a pony!

• [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an auto update that's simple to install, just get this error every time

  [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an automatic update that's simple to install, just get this error at each time HHHHEEEELLLPPPPP! Thank you

  I had the same problem.  But finally found a solution.  If your listing is similar to mine, then keep.  XP Media Center Edition 2005 (sp2).  AMD Athlon 64 x 2 Dual-Core, HP a1630n desktop computer.

  Go to the HP website, search for sp37394-XP sp3 Upgrade utility Microsoft for systems equipped with AMD processors.

  I had the same 0 x 80240036, 0x8024400a error, but realize my problem was really get manually downloaded sp3 and installed without continue loop crashing and not error messages.

• Installation update for creative cloud can never exceed 2%, which means that I cannot have access to Premiere Pro. Can anyone help with this?

  Installation update for creative cloud can never exceed 2%, which means that I cannot have access to Premiere Pro. Can anyone help with this? I need urgent access to Premiere Pro, so I can return videos to my clients.

  Check your (win) Task Manager or activity (mac) for a suspended adobe monitor helps the process that you can complete.

• help with this thread using oracle 7.3

  Dear expert;

  On this thread, I am using

  Help with this

  but I'll need help more with additional information in this regard. see examples of data below

  Hello experts.

  I use oracle 7.3. Therefore, I have the sample data below

  create the table table_one

  (

  req_week varchar (1000).

  Username varchar (1000).

  sale number (30),

  place varchar (1000).

  break_sales number (30)
  

  );

  insert into table_one values ("week 1", 'John', 100, "NY", 2 ").

  insert into table_one values (' week 1', 'Chris', 20, "TX", 3 ')

  insert into table_one values ("week 1", "Melissa", 80, 'GOES', 4 ')

  insert into table_one values (' week 2', 'Katy', 40 'SC', 1 ")

  insert into table_one values (' week 2', 'Angle', 10, 'NC', 2 ')

  insert into table_one values (' week 2', "Vick", 30, 'CA', 3 ')

  insert into table_one values (' week 3', 'Zack', 60 'CA', 1 ")

  insert into table_one values (' week 3', 'Deb', 60 'NM', 2 ')

  insert into table_one values (' week 3', 'Antoine,"60,"TX", 3 ')

  necessary results

  I need the top 2 sales in a place a week

  expected results

  req_week username place sales

  Week1 John 100 NY

  Week1 Melissa 80'S

  Semaine2 Katy 40 SC

  Semaine2 Vick 30 CA

  Semaine3 Zack 60 TX

  Semaine3 Deb 60 NM

  Note, in this particular case, if there is equality in sales, then use the break_sales column as a case. The break_sales was never a tie... it is so far the query and it does not work as expected

  SELECT    d.req_week, d.username, d.sales, d.place
  FROM      nikeus_report.dbo.table_one  d
  ,        nikeus_report.dbo.table_one  o
  WHERE    d.req_week  = o.req_week
  AND      d.sales    <=  o.sales   
  GROUP BY  d.req_week, d.username, d.sales, d.place
  HAVING    COUNT (*)  <= 2         
  ;
  
  

  Any help is appreciated. Thank you

  Hello

  It seems that your existing query is very good, he's going; Just add the conditions for breaking in the WHERE clause:

  SELECT d.req_week

  d.username

  d.sales

  d.place

  FROM table_one d

  table_one o

  WHERE d.req_week = o.req_week

  AND (d.sales< >

  OR (d.sales = o.sales

  AND d.break_sales > = o.break_sales

  )

  )

  GROUP BY d.req_week

  d.username

  d.sales

  d.place

  HAVING COUNT (*)<=>

  ORDER BY d.req_week

  COUNT (*)

  ;

  Thanks for posting the CREATE TABLE and INSERT statements; that really helps.

• I was told that I have to disable my account from my PC to add to another computer... I've done it before and I lost many of my images that were on LR.  No matter WHAT HELP with this please

  I'm trying to load another computer with CC, I was told that I have to disable my PC mine.  I did once before and lost a lot of my images from LR, suggestions on this please.

  I do the LR back ups system too.

  Thank you very much

  PAM

  Hi goaliemom

  There is no way to disable CC products. When you enable a CC product on another computer, simply connect to Creative Cloud.CC will ask you if you it will activate on more than 2 computers.

  I've done it before and I lost many of my images that were on LR.  No matter WHAT HELP with this please

  On the computer on which you will see that your images are not displayed?

  Catalog check the most recently used file > open recent in Lightroom

  Try opening a recent backup made on your newly added computer

  ~ Assani

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.

  I was wondering if I saved a layer somewhere and set it as a default value.

  If you group the layers, you will be left with a single layer, thus spreading your concern.

  Suggest that you do the following:

  1. Make sure you have the latest drivers for your printers
  2. Reset the default preferences.

  Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.

  Items nearby and let regenerate the file.

• I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  For Photoshop CS2 activation has been reprocessed, so your original drive and the serial number does not work.

  As an owner of CS2, Adobe has a copy without activation and serial number, to which you are entitled.

  The serial number is to the right of the download link for Windows. You'll need this one, not your old number.

  Get them here: download Acrobat 7 and CS2 products

• Help with this

  Help with this

  Help with what?

• Trying to get on my email, the following statement comes from the IPU: "we're sorry, but you must enable cookies and Javascript to use your username with this site. I click on "here", but nothing happens. How to enable the amd Javascript cookies?

  Try to get t my email, this happens: we're sorry, but you must enable cookies and Javascript to use your username with this site.
  How can I do this?

  George Szántó
  
  [email protected]

  see similar question answered https://support.mozilla.com/questions/836913

  To be notified of updates to a question, if this is your problem or not just click on the "Get email notifications" and follow made the choice. Only the original poster can mark it as resolved, so there should be a slight difference in choice as an original poster and where you lock on another issue. Notifications only apply to individuals the question where is entered.

• Where can I get help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly d

  Where Iget can help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).» I don't know where to go or how to solve this problem. It started to happen after I went to the office 356 and uses Windows 10.

  Hi brionp43071032,

  Please see the troubleshooting provided in this KB doc steps: fix damaged document error when opening PDF files

  Let us know if you still experience the problem.

  Kind regards

  Meenakshi