I5 vPro Dell place Pro 7130 4300Y 8/256 Windows only runs on AC

Similar Questions

• Impossible to install new BIOS A09 for Dell place Pro 7130

  Validated that I use the correct Bios... :-)

  Scenarios:

  Downloaded the new Bios and run, install rises and tells me it will be need for power, etc. and install works. Reboot the machine it always is on A06

  Since the Bios flash tool and installation runs very quickly and send back me to Windows 8 and is stil on A06

  What should do?

  Question side: is there something speciel set in the bios on the boot. Since I reset the default Bios (A06) I been bugged with problems of departure?

  I can verify that the solution posted by Stone3t worked for me (unplug the battery CMOS).  Too bad, that it requires disassembly of the rear housing which may be too advanced for the average user.

  I had all the symptoms / problems described by posts all on sites of Dell, as well as other: unable to update BIOS, unit will not sleep, etc. Corrupt ME was key. (Intel Management Engine Firmware)  Stupid thing is: he has been altered through updates of Dell.

  Calling the depot repair, or any other Dell support (and 5 + times transferred, pending on hold for hours) has been completely useless as they refused to help because my camera was "out of warranty" Although some had mentioned there was a recall on this issue.

  I am now updated to A15 and through all windows updates and everything seems to be working again.  No, thanks to the support of Dell who refuse to share the answer.

  I not buy all Dell Mobile devices in the near future.

• The power supply Dell place Pro 11 (7130) may be used without danger to charge other devices USB microphone?

  I am trying to determine if it is safe to use my Dell place Pro 11 (7130) - power to charge other devices via micro USB 5v of power.

  That is, phones, tablets, Bluetooth devices (keyboards/mice/headsets).

  I am trying to determine if it is safe to use and avoid carrying more then once Charger Micro USB.

  Said the label on the place of meetings 11 Pro Dell 24W AC adapter charger

  Reference output Dell: 19.5V OR 5V 2A 1.2.
  HA24NM130 / DPN: KTCCJ
  CN-0KTCCJ-75661
  3CP - 0C 11 - A00
  DP/N 0KTCCJ

  I understand that some devices may not charge, I want to make sure that the voltage is 5V for devices usb and not 19.5V, since there 'or' on the label.

  I tried it on a tablet of 5V and it seemed to load correctly: nothing caught fire. Which is in any case an authoritative answer.

• Room Dell place Pro 8 USB mic?

  I have a Dell place Pro 8 with a broken micro-USB port.  The tablet belongs to my daughter to years of high school.  I think she may have plugged in upside down too many times.

  Dell wants $269 to repair (Exchange motherboard).

  Anyone know or knows where to find the part number for the Micro USB connector that mounts to the motherboard?  I am sure that Newark or Digi-key sells an equivalent and I would try to replace me.

  Aunt Pitty Pat

  I have the same problem and this is a problem since the day I received the tablet.  I love the Tablet apart from that.  Now after 1 year use, pin micro usb port is broken and I'm stuck with a useless tablet.

  Actually, you're not: there are repair services via eBay that will replace the port (and even one of the services will use a port that is clearly only 1 lane).  A single service: MYdeviceRepair, $29.95 including return shipping:

  http://www.eBay.com/ITM/Dell-venue-Pro-8-tablet-repair-for-micro-USB-charging-charge-port-connector-/321670929154?PT=LH_DefaultDomain_0&hash=item4ae514db02

  Other services:

  http://www.eBay.com/Sch/i.html?_FROM=R40&_trksid=p2050601.M570.L1313.TR0.TRC0.H0.Xdell+venue+8+Pro+repair.TRS0&_nkw=Dell+venue+8+Pro+repair&_sacat=0

• Problem Dell place Pro 8 HDCP

  I recently bought a Dell coming Pro 8 64 GB.  I'm having a problem with playback of HDCP content protected.  For example, Vudu.com cannot disseminate ultraviolet HD movies on the device, saying the output and the display must support HDCP.  I did all the updates of Windows, but it has not solved.  Is not that a released devices in 2013 is not HDCP.  Does anyone have a suggestion on how to solve this problem?

  Update: this problem is now resolved on my unit after update to the last version of the BIOS (A09) and the latest chipset driver (603.9600.2067.27988, A05).  This is good news.  Even if I had the Tablet for a year now, I still use it a lot.

• Games on a venue Pro 7130 11 8/256?

  I've taken over a 'exit - new' Pro 7130 coming 11 8/256 last week (dock keyboard and stylus too) and I'm crossing my fingers that there not any question that I saw posted here, especially in the 'Freeze' huge wire. If she has any questions I can do some troubleshooting, but probably will return it before my 30 days are up. I can't afford to be stuck with a defective Tablet this expensive and be unable to return.

  In any case, my world is perfect with a 11 place works perfectly, I would like to make some plays of light on it. I have a ton of available older games I've bought over the years on Steam, Humble Bundle, GOG, etc., which I think could run. For example, games like Baldur's Gate 2, Defense Grid, FTL, Kingdom Rush, etc.

  Recommendations for this table/CPU can manage well? I don't mind reducing the necessary resolutions game performance.

  Has anyone connected a X 360 controller? If so, the problems with him?

  I recently had the chance to try the same coming 11 Pro model and I can answer your questions for you safely. Intel HD 4200 of the vPro model isn't exactly hardcore gamer material but it will get the job done admirably well more often expect naturally. It is more than enough for one of the applications on the Store. It can also play several games of office before 2008 at the higher and somewhat more modern settings with medium or low settings. Referring to my own experience and that of other securities experienced, there is the series half-life series Jedi Knight, Star Wars Battlefront, Quake 4, Call of Duty 2 and Fear just to name a few.

  Some recent games like Civilization 5 cannot be read to quick, but without fear. They are still able to work with low settings very well. If you are unsure if a game will work, just look to see if the minimum specifications specify if it can be played on a Radeon X 1950 XT (sometimes referred to as "Radeon X 1950 series") or the Geforce 7900 GTX (sometimes referred to as "Geforce 7900 series"). The reason why both of these desktop graphics is more old cards about position until, or offer the same performance as the Intel HD 4200. In any case, your tablet will be able to make the deal if one does.

  I am pleased to say also that the Xbox 360 gamepad works well. As long as the game says that it supports a Xbox 360 controller, it will work on your Tablet coming 11 Pro.

• Meeting place for Dell 11 Pro 7130 power button / stop does not work

  I just bought this camera and can not get the power button to turn on the screen and off as suggested by the manual should be possible.  If I press and hold the power button then it made a stop hard and if I held down when turned off it will vibrate for a second and then turn on, but a short press does nothing when Windows is running.

  Tried short diagnostics and no problems found. Updated the BIOS to the A13, the drivers updated to the latest versions of all available installers, updated firmware screen scanner and camera. I saw a post from early 2014 with the same question where someone suggested to put it off to quick start, but that has not changed anything either. All Windows updates have been applied.

  How can I get the power button to work?

  If after trying a few things more that I decided to give at the moment and made a sweet sleep on the desktop shortcut, so I had a quick way to get at least the screen turns off. The command to execute is: rundll32.exe powrprof.dll, SetSuspendState 0,1,0

  This seems to be more than Hibernate because it should boot from the bios whenever it turns on (although the arguments given him say no to the hibernation), but it was better than nothing.

  I tested it worked a few times then rebooted the system. When I did this he decided to install updates which he said yet that all were waiting. When he started upward the power button now works.  I don't know what has changed or if the execution of the order makes a difference, but at least it works now.

• Reference Dell place Pro updated to WP 7.8?

  The coming Pro will get the update to version Windows Phone 7.8?

  Here's the best description of the steps:

  www.wpcentral.com/forcing-Windows-Phone-78-Update-Camera-Button-not-required-patience

• Tablet keyboard for Dell place Pro 11 already dead...

  Not sure if it of just a bad keyboard or not, but my keyboard Tablet (not that thin) does not at all.  I tried to restart the computer, disconnect and reconnect the keyboard.  I get no response at all.  Anyone else have this problem or know what's happening?

  So I got a support decision-making and they got running again. I thought for sure that my keyboard has gone wrong. Fortunately, I was wrong.  I have not had problems since. Basically they updated the touch panel drivers, drivers of the chipset and bios. After a few reboots everything worked like a charm.  You can find these drivers on the dell support page. Let us know of this assistance on your.

• Dell coming Pro 11 (7130) does not work with dock station (K10A) and mobile keyboard (K12A)

  Hello! There is a problem with my Dell place Pro 11. The Tablet does not work in conjunction with a docking station with a keyboard with battery docking station. The problem with the docking station, is only the work of power and audio connector. More is running, no ports (HDMI, USB, LAN). The problem with the keyboard, the touchpad and keyboard do not work. Once the battery is connected. Windows 8/1 Pro 64 bit is installed, the latest drivers and BIOS (A15). Without docking station and keyboard shelf works well. USB and HDMI ports on the tablet work well.

  What can I do?

  Thank you!

  Hello

  same problem here. Both my dock and travel keyboard no longer works. Only my dock workload but not USB, etc.

  I've updated my 7130 windows 10 with the latest bios drivers but no luck.

  Time for dell start with patches!

  Benny

• Reference Dell place 11 Pro and Dock

  Hi all

  I have a Dell coming Pro 7130 11 and the docking station. I can't have an external display to work using the HDMI port or display connectors. I have 2 Dell E198WFP (1440 x 900), the two connecting using DVI inputs. Display sometimes appears, but does not have the resolution or refresh rate tries to run at 75 Hz despite being set at 60 Hz

  AFAIK drivers etc are all up to this date, the tablet can connect to an external monitor using the construction to the mini HDMI port without problem?

  Any suggestions, anyone please?

  Hi, the dock rarely works for me... the workaround I found is to unplug power dock and plug back in. (works 95% of the time, I get the monitor like that). It is with the 7130 model.

• Bought 11 5130 Pro place but Dell told Envoy held 11 Pro 7130 and send me a replacement

  I bought the "Dell place 11 Pro 5130" with the processor Atom Bay Trail and 64 GB on May 27, 2014. The item was delivered to me on May 30, 2014. The item arrived defective and the serial number indicates the element as "Dell place 11 Pro 7130" (see photo below - description of the object shows 5130 and 64 GB of storage)

   After talking to the agents and technicians, the specialist resolution Sandra, regimental 112383 says that she has checked and verified that Dell sent me the wrong item, but she would not give me a replacement or fill in the correct order. She seemed rude and appears discriminatory and also told me that I can do what I want, but it will only refund me the money and do not send me a replacement at any price.

  Dell cannot sell me a bad product and forcing me to return the unit and replace with the right pair. It is not only unethical but also illegal to sell something wrong and does not offer a replacement on your own terms and conditions.

  

  

  Just a tip, you can search on the support page of 5130 directly rather than rely on the service tag for the updates. http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-venue-11-Pro/drivers

• Reference Dell place 11 Pro 7130

  Hello

  I recently buy the renovated site of Dell pro 7130.

  The Tablet is absolutely fine and works very well it was preloaded windows 8.1 pro version.

  But in this tablet, my camera does not work when I start windows's default camera app that it says please connect your camera. See nothing in Device Manager, I tried to manually switch the unit Imaging section but failed each time, I haven't updated all the latest drivers from Dell still no luck, also check that the camera is turned on in the BIOS.

  Can anyone please help and give me the driver for this device. or doe which means my camera died completely?

  Hello

  I have EXACTLY the same problem AND I tried EXACTLY the same things you did... you found a solution to this problem?

• Dell place 11 Pro keyboard - touchpad does not

  touchpad does not now

  has worked for 2 months - then stopped working

  noticed 'urgent' download for touchpad on dell driver support page - downloaded and installed

  still does not

  pls advise

  I actually found a way how to solve this problem. Tried above all, disconnect battery, registry fixes and etc... In all cases at some point touchpad become unresponsible. But what I found accidentally - while the touchpad is not respond to gestures and does not move a cursor - function click on the touchpad still works. in any case, this close to me do not have a solution.

  As always, the solution is just magic - all you need to do to restore a bloody thing - is to run SynaUtilitySfx.exe, while the Tablet is connected to the keyboard. The utility will fail saying that the touchscreen device not found - but this will allow touchscreen and a touchpad. Despite I'm an IT professional - I can't explain what is happening, but this method has worked for me.

  I disconnected the keyboard shelf and set the keyboard on the charge, which immediately ruined the touchpad when I connected the keyboard for Tablet. I ran new SynaUtilitySfx.exe - all work. A few times to prove: it does not fix the bloody thing!

  You can get SynaUtilitySfx.exe stuff from the dell Web site, they call it Panel Touch Firmware on Dell place 11 Pro 5130.

• Place 11 7130 vPro freezing problems

  So I just got my vPro 11 place, 7130 today (and I really like it so far) but I noticed that I've met a few technical problems.  I tried searching for similar problems, but nothing helped.

  My problem is that the entire Tablet freezes periodically when not directly connected to the power source.  Sometimes the screen goes all black, but I can feel the haptic of the Windows key.  Sometimes the 80% upper of the screen turns into what looks like a field of stars.  It is quite difficult to explain, and I try to take a picture of it the next time it happens.  When one of these problems occur, it is a quick reset and the problem is solved, but it was kind of annoying.

  Everyone knows these same problems?  Let me know if I need to provide any other information.

  Thank you!

  Click Start-> all-> Intel HD Graphics Control Panel Apps. Click on 'Power', then click on "Off" next to Panel to refresh.