I9 stature and convert the video in a readable format

Similar Questions

• I want to convert my video files in FLV format as im eager to export the video in flash, this seems to be the only format that it will accept. Media Encoder is more to this format, how can I get around this?

  I want to convert my video files in FLV format as im eager to export the video in flash, this seems to be the only format that it will accept. Media Encoder is more to this format, how can I get around this?

  I could be wrong, but in my research for this issue, I learned that there is no solution from Adobe to convert an F4V or a FLV. I talked to Adobe support directly and they told me to buy a 3rd party conversion program. I find absolutely stupid that the only way to embed a video in Animate using a FLV or F4V, and there is no codec to convert video in this format.

• Error: "Quicktime may need to be installed in order to display or to convert the video in Adobe Media Encoder.»

  I'm trying to export a Flash video. I get this message

  "Quicktime may need to be installed in order to display or to convert the video in Adobe Media Encoder."

  Despite the error message, it "seems" and spits a mov file, but only the audio crosses (the video is all black).

  I use Flash Professional CC, but older versions (CS6) seem to have the same problem.

  Some tips on how to export as swf no Flash?

  Thank you!

  I would still choose not to send the video through Adobe Media Encoder, which can stop the error message.

  What is your scenario? Video export cannot export integrated H.264 video. If you do animation and audio to go on top an existing H.264 format video, export, but make sure the alpha box set when exporting. Then, you can combine the old movie H.264 with the animation and the sound you made in Flash.

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• Hello, I have just purchace pdf to word and excel converter and pay $ 24, but finally it's completely uselless for me because there no Greek language and convert the file completely incomprehensible... that I can speak for that?

  Hello, I have just purchace pdf to word and excel converter and pay $ 24, but finally it's completely uselless for me because there no Greek language and convert the file completely incomprehensible... that I can speak for that?

  Hi mariax7664987,

  Https://cloud.acrobat.com/ service export to Adobe PDF format is used to change the shape of PDF file format to other formats supported fire. His will not change the language of the PDF text.

  Kind regards
  Nicos

• replace some symbols and converts the value to a number

  Hi all. I've got bp_link table with 'avalue' column VARCHAR2 (200). If I can find a different version of p here:
  
  (a) 100%
  (b) 100
  (c) 100.00
  (d) 100.00
  (e) null
  (f) symbol of space
  (I hope that all versions are mentioned).
  
  So I try to replace some symbols and convert the value to a number using the following steps:
  
  NVL(Avalue,0) - removes the null value
  Replace (NVL(Avalue,0), '%', ")-removes the symbol '% '.
  Replace (Replace (NVL(Avalue,0), '%', "), ',','. ')-remove a symbol «,»
  Trim (Replace (Replace (NVL(Avalue,0),'%',''),',','.')) - removes the symbol space)))
  TO_CHAR (Trim (Replace (Replace (NVL(Avalue,0), '%', "), ', '.'")), "FM999999999999.90")-converts format "100.00".
  
  But it still does not, maybe I don't see anything else.
  
  When I just "select * from...". "it works:
  
  Select to_char (trim (replace (replace (nvl(avalue,0), '%', "), ', '.'")), "FM999999999999.90")
  as avalue of JJ bp_link where roletypeid = 9
  
  But when I try "order by avalue" ends with error - ORA-01722: invalid number
  
  Select to_char (trim (replace (replace (nvl(avalue,0), '%', "), ', '.'")), "FM999999999999.90")
  as avalue of JJ bp_link where roletypeid = 9
  order of dd.avalue
  
  What can I do else?

  Maybe this will help you
  http://nimishgarg.blogspot.com/2010/04/Oracle-SQL-extract-numbers-from-string.html

• Photo Gallery can't open the photo or the video because this file format is not supported or I have no updates to the photo gallery of what it means?

  Photo Gallery can't open the photo or the video because this file format is not supported or I have no updates to the photo gallery of what it means?

  Hi mariart

  Welcome to the Microsoft Answers Forum!

  ·         What format of picture or video file you are trying to open using the Windows Photo Gallery?

  Here is the link that will give you the description of the Windows Photo Gallery: Windows Photo Gallery: frequently asked questions

  Make sure that the Windows Photo Gallery is the default value. Steps to follow:

  i. Click Start, in the search box type in default of program

  II. Select set your default programs

  III. click the windows photo gallery, and then select set this program as default

  Link for reference: change that uses default Windows programs

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the

  I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the file at all, I tried to turn the file. Fortunately, he rotates the photo and turned it back. Why the program allow me to create layers?

  You click on Expert in pse before trying to add layers?

  Or it is possible that the image is 16-bit/channel.

  In photoshop elements go to Image > Mode and click on 8-bit/channel and see if that makes a difference.

• QuickTime player converted the video AVCHD in BDMV file and now I can't see it

  My QuickTime Player converted my video card SD of AVCHD in BDMV files and now I can't see it on my computer as the BDMV file opens with QuickTime Player, any other application.  Help, please!  Thank you!!

  VLC can play BDMV on a Mac files.

  

• How to FF in Rockbox and resume the video plays

  Please someone help me...

  I have e260v1 and hav rockbox installed on it... i have converted videos using winff and load them into the video folder...

  but the problem is when I play them I can't fast forward em... also I can't find a way how to stop sometimes to something else and then again to resume the video I was watching already...

  for the same, tried many things...

  Make sure you have the latest version of installed rockbox.  They just released version 3.0, you can download it from rockbox.org and unzip it in the folder .rockbox on your player for an easy upgrade.

  Fast forward your video is identical to quickly send a music file: press on the > | button and hold it pressed.  The summary function works by loading the same video file after it stopping in the middle.  You have the option to get out of the where you left off or restart from the beginning.  If you do not see this option of recovery, that's probably because it was a feature added since the last time you updated your installation of rockbox.

• After the publication of video in Movie Maker, it has a large green block down and extends the video

  I used a video camera to make a video and down it loaded on my computer.  Director of Windows wouldn't let me not download it from there, I guess that he could not read, so I converted it on AVS video converter 7.1 for mp4, which was unreadable on windows movie maker.  I then converted it to an avi and easily, he was transferred.  My problem is now, after the publication of the final draft of the film, he shows a huge green block at the bottom of the video and stretches horizontally on video.  This is not displayed when you edit the movie in windows movie maker, please help.

  Hello

  Since you used the 3 part video conversion software, we have no way of knowing what has occurred with the video. The only thing we can suggest is to follow the instructions in the following articles using the original video recorded and imported into Movie Maker:

  http://Windows.Microsoft.com/en-us/Windows7/make-a-movie-in-four-simple-steps

  http://support.Microsoft.com/kb/930435

• ProBook 455 L3P93ES G2 #ABZ: installation without end and return the video driver AMD R6 and R7 M260DX and stop on a black screen system

  Hello, I'm in trouble with this problem. If anyone can help me, I appreciate a lot. Thank you in advance.

  Laptop: HP ProBook 455 G2 L3P93ES #ABZ

  Problem: windows back AMD R6 and R7 video driver to the old version of windows update install. Return process the screen come black and stop here.

  Procedure, I followed:

  1. updating the bios with the latest version (M75_0141.bin)
  2. new facility created by HP Cloud recovery customer USB boot disk
  3. Install the drivers and programs of the HPSoftwareSetup.exe util
  4. Connect the network cable and upgrade the drivers and the HP Support tool programs assistant
  5. Install the software
  6. Join the Organization's domain
  7. Force Windows Update to version 1607 by the upgrade of Windows tool
  8. Windows Update

  Item 4, at random, windows update 10 and return the driver from these versions:

  • 15.201.1301.0
  • 15.201.2301.0
  • 15.300.1025.1001

  I don't have install the AMD specific video driver (Radeon Crimson Edition 16.7.3 software) or drivers from the Chipset AMD (Crimson edition 16.7.3) because when I try in a previous installation of test I had the same problems

  To restore the display I have to start windows in safe mode and disable the two R6 and R7 display cards, and then restart. After that I can reactivate the cards one time.

  This device first question first time I install Windows 10 the year in August (Yes, after a few days Windows 10 out)

  Any help that will be much appreciate because I have to reinstall on 20 laptops for the school to start the day.

  Thank you

  ScuolaCarovana

  Hello;
  
  Let me welcome you on the HP forums!
  
  From your description, it seems that, after you have installed the correct video driver for your ProBook (15.201.1301) AMD, Windows Update is then by installing a different driver on top of that, right version?

  If this is the case, you must follow these instructions to STOP Windows update update drivers: how stop Windows 10 to update automatically the device drivers - windows Windows 10-10

  Once you do this, you should not see updates to the pilot after that.

  Good luck

• How to start and stop the video capture in a state machine

  Hello

  I am a student of neuroscience and this is what I try to do: 1) trigger a camera to GigE (200 FPS), 2) start the video capture, 3) triggers a light that stays on for x milliseconds, 4) trigger a valve that will blow an air puff, 5) stop the tone and the valve at the same time and 5) stop the video capture 1 second after 4). For this, my VI is a state machine, with a State for each trigger (ex, 1 State for trigger camera 1 State of light of trigger, ect) and a statement to "stop" and a "time-out State." Everything worked except the video acquisition - the program could trigger the camera but only acquire a frame, because it was not running in a while loop and this is my first question: for an acquisition video is it always necessary to have a while loop?
  I guess the answer is Yes, so I built a loop of 'consumer' for the camera. A queue of the pre-trial 'trigger camera' in the loop of producer, I was then able to start the video capture, but now the problem is to stop it at the right time. I have an another queue in the State of 'stop' in the loop of the producer, but is not able to start the State 'stop' in the loop of consumer, I think that maybe it's because the loop of consumer gets "stuck" in the whole loop.

  I hope you can help me, the VI is attached. Thank you!

  Hello

  First of all, in your loop producer: STATE 'Stop', you use the flushing line, then there is no need to use 'item queue at the opposite end. You can use the enqueue function.

  Secondly, you said "I moved the command stop inside the while loop as you said, but it did not work. But if you look closely, you moved "Enqueue function" inside the while loop. Instead you should use Dequeue function. Please, look at the picture I posted an orderly manner.

  And remove the circled (i.e. function. Enqueue function loop of consumption, where I wrote 'Why stop here').

  Try now.

• Used the update and now the video card is not recognized

  I updated updater manual update and have not updated anything since early December, 01/30/10 I installed the 5 important updates that were listed, I don't remember who they were, after installing the computer needed to restart and after the recovery, the video card is no longer recognized.  I get the BIOS beep code for no video card or bad video memory.  I know that this seems to be a hardware problem, but this computer worked fine until these updates. Now that the video card is not recognized, I can't even get into the BIOS, and still less actually starting windows. Any help/ideas what caused this and how can I fix this are greatly appreciated, thank you very much. Even a list of the latest important updates might be useful, I can't seem to find a list of anywhere.
   
  System-Vista Home Premium 64-bit
  Palit-card nVidia GeForce 9600 GT graphics card

  Oh and I took out that graphic card and put in a different one, nVidia PNY GeForce 7900 GS and always get the same error code. I also disconnected and removed the battery from the motherboard to reset the BIOS, still the same problem.

  Hi JohnyDick,

  This problem seems to be due to the updates of Windows, although it could be a coincidence.
  I first you recommend to remove the nVIDIA graphic card and connect the monitor to the onboard graphics card, then try to start the computer.
   
  If the problem persists then I recommend you to contact the computer manufacturer for assistance.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• my screen shows everything very large, small and flat screen and all the videos I watch is out of sync.

  I have windows xp home edition. The other day I started my PC and noticed it was different, all the photos are small and fat (I have a wide screen, so I know the difference). When in display and put the correct setting resolution but it has not made the difference. I can't find my monitor listed in either Device Manager and do not have the disc that came with it or cant foind driver on the net! Whenever I go to an online tv episode, or a video it all out of sync is too. Please someone help?

  Hello

  -Did you change on your computer before the show?
  -Have you made changes on the monitor button?

  I suggest you perform a System Restore to the point that your computer was working normally.

  If the problem is with the monitor, see the monitor manual to change the display of monitor settings.