IBM t61 does not start

Similar Questions

• T61 does not start

  I saw major emergency and in full panic mode.

  EU back from lunch and my T61 screen was black. Handlebar space bar and the mobile mouse does not wake. I used the power button / stop to stop.

  The computer will not contribute to that. When I push the power button / green lights appear and it is as if it was about to start, then I get a series of 3 beeps. Long-term follow-up of two short films (beeeep beep beep). That's all.

  I removed the battery and let it set for awhile, battery has been replaced and got the same result. I was not able to get anything to display on screen - just three beeps when I try to start.

  I have a T61 with Windows 7 (7662CTO).

  Help, please!

  
  

• IBM T21 does not start

  
  
  

• ESX 3.5 does not start with two intel cpu on an ibm HS21 blade 5420

  I have 4 ibm HS21 blades that I bought recently and ESX 3.5 does not start on them if I have both CPU intel 5420 installed. It will start if I remove one of the CPU. This also occurs if I try ESXi.

  I have two blades I bought 8 months ago that work well with both CPU is installed. Blade models are very similar, "old" is hs21-8853a1c new knives is hs21-8853g3u.

  I have updated the bios and the controllers. At this point, I shot two blades of the additional processor so that I can use them but I would really like to put back them.

  Any thoughts?

  David,

  Welcome to the forums!

  Could check you if two microprocessors are executing a different step? If so, then the debate may be relevant here .

  Sanjana-

• B560 does not start

  Hello

  My B560 does not start immediately when you press the power button - today it started after 90 minutes!

  I installed energycut, tried to run the Tower discharge of static electricity T61, removed from the RAM, swapped the hard drive, but still it does not start immediately.

  Any ideas?

  Thank you

  Garry

  I'll be back my laptop yesterday - the report says that the motherboard has been replaced.

  Fortunately, the startup problem is fixed.

  See you soon,.

  Garry

• Recovery CD does not start

  Hello

  I have an old IBM ThinkPad R50e (1834-PTG). When I originally bought in 2003, I created a set of recovery 6 CDs I kept this set in a place course and decided today to recover the laptop factory settings. The problem is that the computer won't start any recovery of 6 CDs (does not start other CD bootable without problem). CDs are not empty and contains a directory named "RECOVERY" with a bunch of files that it contains.

  I tried to use specify the CD-ROM drive as first boot device, to use F12 to specify the device, nothing helps.

  How can I use these CD?

  I found a ghost image, which is the result of a whole new R51. I'll be able to use it to recover my system? Will be the key of Windows that came with my computer work with this image?

  Well, it turns out that there was another drive (surprise) the names "Recovery boot CD. Now, the recovery process begins without any problem.

• My HARD drive is detected by the BIOS, but it does not start

  I have a laptop, OS is Window7, the HARD drive is detected by the BIOS, but it does not start, I formatted and the procedure going well until the reboot, it starts not to finish formatting.
  Please, I need help!
  Thanks in advance

  Hello

  Sounds like the hard drive has failed, or other hardware issues affecting the reader by the mother-
  Board or wiring.

  Check with Lenovo support, online documentation and diagnostics and ask questions about known issues in their
  forums.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  ---------------------

  The manufacturer Diagnostic utilities - use them to check the disk.

  (The old 302602 links isn't now valid for Diagnostics links).

  Manufacturer diagnostic utilities - run one to your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.html

  Corrected list dated 06/09/2010

  Fujitsu hard drives: utility of diagnosis here
  http://www.Fujitsu.com/EMEA/products/HDD/

  Hitachi hard drives: utility of diagnosis here
  http://www.HitachiGST.com/support/downloads/

  IBM hard drives: use Hitachi utility *.

  Toshiba hard drives: use Hitachi or Maxtor utilities

  Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
  http://www.Seagate.com/www/en-us/support/

  Quantum hard drives: use the Maxtor utilities

  Seagate hard drives: here Diagnostic utilities
  http://www.Seagate.com/www/en-us/support/downloads

  Conner hard drives: use the Seagate utilities

  Hard drives Samsung: utility of diagnosis here
  http://www.Samsung.com/global/business/HDD/

  Hard drives Western Digital: utility of diagnosis here
  http://support.wdc.com/product/download.asp?lang=en

  Trial versions of one of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Does not start after the reload of the operating system

  OK, this is my story of boredom.  I have a Lenovo T61 Type 6463-5BU, S/N L3-xxxxx.  The hard drive died a few weeks ago, and since then, I have received a replacement drive under warranty, that is the exact same drive type.  We had a backup image of the old system under Norton Ghost and managed to get the image to the new disk once it has been installed.  To do this, we used a utility called OS
  'BartPC '.

  Since then, I did pretty much everything I can think of to get the system to boot, including playing with the BIOS settings, setting the drive to 'boot' and 'active' with the help of a number of public services, including the good old "diskpart" and many others.  The reader will just not start.  A few times I could read the disc using Bart in command prompt mode, but I never managed to boot from it.

  The laptop has a finger print reader, but I was told several times that this has nothing to do with the problem.  So... before I cut off the finger of a person and drag in the player... What am I doing wrong here?

  Note of the moderator; s/n, under the direction of protection own members

  AGoodSolutionideas can save I hope as your image.

  For later use, take a look at this document from Lenovo on the use of Ghost; Partition does not start after being restored with Norton Ghost - NetVista / ThinkCentre / ThinkPad...

  I know it says 'prior to 2004 systems', but it is still topical.

• Find product key Windows 8 on a computer that does not start

  I bought a laptop Lenovo, a little over a year and all of a sudden, he started a loop when I try to turn it on. The computer seems to want to start with the Lenovo logo and then I get a blue screen with an irritating "your PC has encountered a problem and needs to restart." We are only collecting the error information and then we'll restart for you. : ("message and then the computer restarts and does it again and again and and more.")

  I brought my friend who is a technician and he said that I need the product key Windows 8 to create the Recovery Disk/USB. So I checked the area in which my laptop has been delivered to and there is no product key is located. Is it possible to find even if my computer does not start? I can access the configuration screen, but I can't find anywhere here either.

  Any help with this would be really appreciated.

  Thank you

  LUN

  With Windows 8, Microsoft changed stickers that have the product key that the user must type in during the installation of the operating system of new embedded BIOS product key. The idea is that by eliminating the tile, you eliminate one of the easiest ways for nefarious users get a legitimate product key. The sticker also eliminating product key removes any concern that the vignette could get damaged while at the same time eliminating the long and irritating the process of typing in various letters and numbers in the installation of the operating system.

  If the user has to reinstall the operating system on a computer with Windows 8, the installation process automatically captures key software product of the motherboard BIOS without input from the user. This means that these stickers familiar windows product key will no longer appear on Windows 8 computers.

  You must use the recovery partition to reinstall Windows 8, if its not functional, you should ask a Lenovo recovery media:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-4HWSE3

  Computers laptops Lenovo include a function called the Lenovo OneKey Recovery button, which is used to boot into the recovery environment and to reinstall Windows.

  If this does not work, contact technical support

  replacement of http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do and demand

  See also:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT076024

• Win2008 R2 does not start after P2V

  Hello

  I am facing a problem while doing a P2V of Win2008 R2 and it does not start after P2V with error 'selection 0xc0000225 - initialization failed because a required device is not accessible' on VM (error see attachment). We use 4 standalon converter (also tried with PlateSpin Migrate 9.0.2) to virtualize Windows 2008 R2 SP1 (HP DL580 G7) in VMware ESX 3.5.0 (IBM 3850 M2) environment. Pleae help solve them if anyone faced this issue earliar. Thank you in advance.

  Rajat

  Hello René,.

  In fact it is not, there is a mistake in the release notes.

  You can try at least a target with Converter 5.0 reconfig.

  Kind regards.

  Plamen

• The CSSD does not start automatically on the Non-RAC - AIX 5 L

  Hi all
  
  Database: Oracle 10.2.0.4
  AIX 5.3 TL 10 OS
  
  I am facing a problem with the Non-RAC/Clusterware CSSD.
  
  When we restarted the CSSD service server does not start automatically, and there is no relevant messages in the log files of the CSSD.
  
  Run 'localconfig reset $ORACLE_HOME', to run but does not start the CSSD.
  
  Running 'start /etc/init.cssd' - does not work, nothing happens when you throw
  
  I manually ran "file/etc / init.cssd to run" and the start of the CSSD (ossd.bin) service without errors.
  
  No error on errpt in AIX.
  
  I opened a SR, but I'm waiting for response from the Oracle.

  Hello

  I think that this problem is not with Oracle, but in AIX.

  It may be that a process that starts at the start is the other process. You need to identify what application/process.

  Check the process in inittab who are already active and which are inactive, they must be active.

  A clue: is very common process that is launched in standby mode keep the boot server.

  wait
  When the init command enters the run level that matches the entry's run level,
  start the process and wait for its termination.
  All subsequent reads of the /etc/inittab file while the init
  command is in the same run level will cause the init command to ignore this entry.
  

  http://publib.Boulder.IBM.com/InfoCenter/AIX/V6R1/index.jsp?topic=/com.IBM.AIX.files/doc/aixfiles/inittab.htm

  Kind regards
  Levi Pereira

• Siri does not start under macOS Sierra

  I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

  In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

  Y at - he of the log files that I should be reviewed to determine the cause of this problem?

  Thank you

  Steve

  Same thing here on a MacBook Pro (13 inch, late 2011)

• Black MacBook does not start

  I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

  Any suggestions?

  It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

  http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.

• iPhone hot 5s fees and does not start

  phone is connected to the load.  After a while I checked it and it was very hot.  I unplugged it and now it does not start.

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.

  More troubleshooting can be found in this article:

  If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

• iMac does not start after the last security update

  Hello

  After the last update my iMac (late 2009, El Capitan) does not start.

  The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

  Does anyone have any advice for me?

  THX

  INTELLECTUAL PROPERTY

  a solution that helped me:

  Re: security update causes damaged Apps