ICF target recon is nto create the event

Similar Questions

• iPhone creates the event twice on Google Calendar

  I use the calendar app in my iPhone 5 c with iOS 9.2 to sync my Google calendar with five subcalendars.  They are all fine synchronization, for the most part.  When I create a new event on my iPhone, the event appears on my Google calendar in a few seconds.  It is ok.

  HOWEVER, if I edit the event on my iPhone to one subcalendar to another, and then a SECOND EVENT soon appears on my Google Calendar.

  Subsequently, my Google Calendar shows TWO events at the same time, one on each subcalendar, then my iPhone only shows a SINGLE, on the second subcalendar.

  This behavior does not occur with calendar on my Mac running 10.11.2.  Can I change the subcalendars for an event over and over again, and my Google Calendar follows perfectly.

  Any suggestions on how to research this problem would be appreciated.

  -Gil

  I have a similar problem. When I add an event on my calendar to the iPhone, then change to another calendar (I have a few calendars different iCloud defined), it shows as 2 tests: one in each calendar. I tried to delete a. They were BOTH deleted. I was able to recreate the scenario once, but so is not not new.

  I'm guessing it's related at the time of synchronization with iCloud (?)

• Create the event in burst Analytics

  How to create events in burst Analytics? I use following code but it does not create any event in whirlwind FRO my project.

  FlurryAgent.setLogEvents (true);
  FlurryAgent.onEvent ("MyEvent");

  You call Flurry.onDestroyApp () when the application is closed?   Test yourself on Simulator or device?

• How to create the event with the parameter schematically

  Hello

  I created the button schematically, I want to pass the parameter for this event.

  And I must capture this setting in LICS pls help someone.

  OASB OASubmitButtonBean = (OASubmitButtonBean) pageContext.getWebBeanFactory () .createWebBean (pageContext, "BUTTON_SUBMIT");

  oasb.setID ("ZoomBtn");

  oasb.setUINodeName ("ZoomBtn");

  oasb.setEvent ("Zoomeve");

  oasb.setText ("zoom");

  webBean.addIndexedChild (oasb);

  OASubmitButtonBean zoomBt = (OAButtonBean) webBean.findChildRecursive ("ZoomBtn");

  If (zoomBt! = null) {}

  Hashtable paramsWithBinds = new Hashtable (2);

  paramsWithBinds.put ("PoHeaderId", new OADataBoundValueFireActionURL (webBean (OAWebBeanData),

  "{$PoHeaderId}"));

  FireAction = firePartialAction

  OAWebBeanUtils. getFireActionForSubmit (zoomBtn, "openCustRefDetForm", null, paramsWithBinds, true, true);

  zoomBtn.setAttributeValue (PRIMARY_CLIENT_ACTION_ATTR, firePartialAction);

  }

  But it gives the following error.

  • Error (50.9): method getFireActionForSubmit (oracle.apps.fnd.framework.webui.beans.nav.OAButtonBean, java.lang.String, null, com.sun.java.util.collections.Hashtable, boolean, boolean) could not be found in the oracle.apps.fnd.framework.webui.OAWebBeanUtils class

  Dilip salvation,

  Thanks for your replay instance it works fine.

  Good answer,

  Instead of

  import com.sun.java.util.collections.Hashtable;

  We have to import

  import java.util.Hashtable;

  Kind regards

  Sangu

• How to create the event handler in OIM11g

  Hi all
  
  How can I create an event handler in OIM11g
  
  Thank you in advance.

  There are three components necessary to generate this
  1 plugin.xml
  2 EventHandler class
  3 eventhandler.xml to import in the scheme of SDM that define the OPERATION, CONTROL, etc.

  You can zip the first two and enroll using register utility in server/bin and then import a 3rd in MDS using WeblogicImportMetaData.sh

  to follow the details link below
  http://docs.Oracle.com/CD/E14571_01/doc.1111/e14309/oper.htm

  Step by step of development explanation, deployment

  http://idmoim.blogspot.in/2011/07/developing-and-deploying-OIM-11g-custom_29.html

  -nayan

  Published by: Zaba Nayan on 8 February 2012 08:54

• I have error on the event of key property

  I created the event for my Logout button, that I put it when someone click on it to change the value of the horizontal slider switch to false, in the value of the domain property I enter 1 or 0, but used to accept it accept only true or false, I say it's OK. But when I run my application and press the button I have error.  I have attached the picture of the error.

  And I have this error all the time, just a few times.

  Real strings must be 'True' and 'False '. We are supposed to support all lowercase also, but maybe that does not completely work. Capitalize the first letter and see if that helps.

• Is there a c# example to use the event handler ExpressionEdit Custom Button control

  TestStand 4.1

  VISUAL C# 2008

  I've added the event handler for ExpressionEdit events as I would any event handler:

  exprEdit.ButtonClick += new NationalInstruments.TestStand.Interop.UI.Ax._ExpressionEditEvents_ButtonClickEventHandler (_ExpressionEditEvents_ButtonClickEvent);

  Then, I create the event handler using the syntax

  public void _ExpressionEditEvents_ButtonClickEvent(NationalInstruments.TestStand.Interop.UI.ExpressionEditButton btn)

  {

  }

  I get the following error when I compile Isaiah:

  Error 1 no overload for delegate matches '_ExpressionEditEvents_ButtonClickEvent' 'NationalInstruments.TestStand.Interop.UI.Ax._ExpressionEditEvents_ButtonClickEventHandler '.

  I guess that means that I don't have the right parameters or types in my statement of event handler, but it corresponds to the object browser.  Any ideas on what I'm missing?

  See my last edition but I think you want your handler to look like this:

  Public Sub exprEdit_ButtonClick (ByVal sender,
  NationalInstruments.TestStand.Interop.UI.Ax._ExpressionEditEvents_ButtonClickEvent
  (e)

• Error importing metadata when you create the import profile

  Hi guys,.

  I am creating an interface to metadata (out-of-the-box) to Fusion (source) to a HFM application. I have successfully completed the following activities:

  -Registry system source

  -Configure entities accounting source

  -Initialize the source system

  -Target registry system

  -Create the import format (Fusion of application HTP) that corresponds to the account dimension in the target application the COA account segment from the source system.

  -Create the location, connected to the high import format

  -Create the metadata rule

  When I try to run the rule of metadata, it triggers the following error in the step "design EPMA import profile for dimension ERPI system profile 5:

  2015-03-09 13:04:32, 456 [AIF] INFO: [exportMetadataToEPMA: 201] end (java.lang.Exception: javax.xml.rpc.soap.SOAPFaultException: System.Web.Services.Protocols.SoapException: server was unable to process request.---> System.FormatException: input string is not in a correct format.)

  See below the FDM application log:

  2015-03-09 13:04:25, 716 [AIF] DEBUG: CommDim.getRuleInfo - END
  2015-03-09 13:04:25, 717 DEBUG [AIF]: AIFUtil.callOdiServlet - START
  2015-03-09 13:04:25, 941 [AIF] DEBUG: the registry has been found!
  2015-03-09 13:04:26, 006 INFO [AIF]: Services of EPMA Web URL: http://EPM11124V2:19000 / hyperion-bpma-Server
  2015-03-09 13:04:26, 007 [AIF] DEBUG: establishing a session now...
  2015-03-09 13:04:29, 523 INFO [AIF]: the session Id is: fa0ecc96-m-e2ee-f7be-8b8b6d0112d8
  2015-03-09 13:04:31, 305 [AIF] INFO: creation of profile import:
  2015-03-09 13:04:32, ERROR 451 [AIF]: error encountered
  2015-03-09 13:04:32, ERROR 453 [AIF]: error encountered
  2015-03-09 13:04:32, 456 [AIF] INFO: [exportMetadataToEPMA: 201] end (java.lang.Exception: javax.xml.rpc.soap.SOAPFaultException: System.Web.Services.Protocols.SoapException: server was unable to process request.---> System.FormatException: input string is not in a correct format.)

  Server stack trace:
  at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)
  at System.Number.ParseInt32 (String s, NumberStyles style NumberFormatInfo info)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.DataSourceInfoByName (Guid sessionID String dataSource)
  to Hyperion.DimensionServer.Proxies.ImportsProxy. <>c__DisplayClass1. b__0() < CreateImportProfileForApplication >
  At Hyperion.DimensionServer.Global.HandleThreadContext (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.BaseProxy.HandleAPICall (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  to System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage (md IntPtr, Object [] args, object, Int32 methodPtr, Boolean, Object fExecuteInContext Server [] & outArgs)
  at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage (Int32 methodPtr, IMessage msg, Boolean fExecuteInContext)

  Exception thrown once again [0]:
  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)
  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)
  At Hyperion.DimensionServer.Interface.IImports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  At Hyperion.DimensionServer.WebServices.Imports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  ---End of inner exception stack trace---)
  2015-03-09 13:04:32, 489 [AIF] DEBUG: AIFUtil.callOdiServlet - END
  2015-03-09 13:04:32, 498 FATAL [AIF]: error in CommDim.loadMetadata
  Traceback (most recent call changed):
  Folder "< string >", line 4185 in loadMetadata
  RuntimeError: java.lang.Exception: javax.xml.rpc.soap.SOAPFaultException: System.Web.Services.Protocols.SoapException: server could not process the request. ---> System.FormatException: input string is not in the correct format.

  Server stack trace:
  at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)
  at System.Number.ParseInt32 (String s, NumberStyles style NumberFormatInfo info)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.DataSourceInfoByName (Guid sessionID String dataSource)
  to Hyperion.DimensionServer.Proxies.ImportsProxy. <>c__DisplayClass1. b__0() < CreateImportProfileForApplication >
  At Hyperion.DimensionServer.Global.HandleThreadContext (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.BaseProxy.HandleAPICall (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  to System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage (md IntPtr, Object [] args, object, Int32 methodPtr, Boolean, Object fExecuteInContext Server [] & outArgs)
  at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage (Int32 methodPtr, IMessage msg, Boolean fExecuteInContext)

  Exception thrown once again [0]:
  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)
  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)
  At Hyperion.DimensionServer.Interface.IImports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  At Hyperion.DimensionServer.WebServices.Imports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  -End of the exception stack trace internal-

  2015-03-09 13:04:32, 568 FATAL [AIF]: error in the load metadata
  2015-03-09 13:04:32, 641 [AIF] INFO: end process FDMEE, process ID: 201

  I'm new type of debugging using FDMEE, but I am not mistaken, he finds a string where I shouldn't be finding a string somewhere in the metadata? I looked in the source system metadata, but I see not all metadata 'string. ' Could someone maybe advise and point me in the right direction on how to handle this error (which causes the error, where to look, etc.). Any help would be appreciated kindly!

  Kind regards

  Gerard

  Hello

  Looks like you might need to work on ensuring that FDMEE can talk to EPMA.

  Also take a look at the following doc:

  FDMEE: Export of metadata for EPMA fails (Doc ID 1633771.1)

• Help with the event handler.

  Hello
  We had two adapters entity IOM 10 g that fires when the user group memberships are changed. He was attached to the User Groups.User Members post insert and delete data object after.
  To have the same functionality in OIM 11 g, we try to create the event handler.
  
  I have doubts in this regard.
  1. how the event handler will fire in 11 g on change of group.
  2. we have event handlers that are registered using Ant plugin to check utility. Now, if I want to join this newly created event handler, do I need to implement the new code already a create a new pot and re-save the plugin or can we have several plugin.zip file.
  
  Thank you
  
  concerning
  Stone

  steps below:

  prepare the pot for the class as in 10g-> put the server (anywhere) IOM-> goto /Server/bin/now run below
  UploadJars.sh

  Select as a scheduled task
  provide the absolute path with name of the jar.
  If credentials requested provide IOM credential (xelsysadm)

  Once the pot is downloaded to remove the file system. subsequently if necessary change to use UpdateJars.sh instead of UploadJars.sh
  Once you do this PurgeCache.sh performance as well

  --

• How to aggregate all the events which lead to the occurrence of a complex event?

  Hello
  
  Is it possible to aggregate all of the events that lead to the occurrence of a complex event in this complex event?
  
  Let's say we have six singles events

  id    amount    groupId
  1     1         1 
  2     0         2 
  3     1         1
  4     1         2
  5     2         2
  6     1         1

  The definition of complex event is

  select sum(amount), groupId from myStream[range 20 seconds slide 20 seconds] group by groupId having sum(amount) = 3

  Consider that I have the following class for my complex event:

  public class ComplexEvent {
      private int groupId;
      private int amount;
      private List<SimpleEvent> events;
  
      // getters and setters
      ...
  }

  Is it possible to have two complex events:

  ComplexEvent1 = {groupId=1, amount=3, events=[{id=1, amount=1, groupId=1}, {id=3, amount=1, groupId=1}, {id=6, amount=1, groupId=1}]}
  ComplexEvent2 = {groupId=2, amount=3, events=[{id=2, amount=0, groupId=2}, {id=4, amount=1, groupId=2}, {id=5, amount=2, groupId=2}]}

  How can achieve us?

  Hello

  I blogged an example of solution to this type of use case since it is a common scenario in the CEP applications:

  http://blogs.Oracle.com/CEP/2010/08/enriching_complex_events_with.html

  There are not currently out-of-the-box support for the events of paging to disk storage. If you really more events that can fit into the Java heap, you can try persistent events of the database or a data grid, such that the consistency and by linking to the database or the cache to create the event complex containing the events of causality.

  Another approach is to horizontally partition the flow of incoming events on multiple servers.

  Kind regards
  Seth

• Create the function object with custom connector ICF

  Hello
  
  I develop a Custom Connector ICF. When put into service a user, the user is created on the target correctly, but the process remains on the status of 'Provisioning '. When I check the log file, I see the following error message:
  
  [oim_server1] [ERROR] [] [ORACLE. IAM. CONNECTORS. ICFCOMMON. Prov. ICPROVISIONINGMANAGER] [tid: [ASSETS].] [ExecuteThread: '21' for queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [ecid: c4b0db765c688017:-2d2de9cf:13c04b25533, :-8000-0000000000002b20, 0] [APP: IOM #11.1.2.0.0] oracle.iam.connectors.icfcommon.prov.ICProvisioningManager: createObject: error while creating user []
  java.lang.IllegalArgumentException: null field label does not exist
  at oracle.iam.connectors.icfcommon.service.oim9.OIM9Provisioning.getFieldName(OIM9Provisioning.java:174)
  at oracle.iam.connectors.icfcommon.service.oim9.OIM9Provisioning.setFormField(OIM9Provisioning.java:63)
  at oracle.iam.connectors.icfcommon.service.oim11.OIM11Provisioning.setFormField(OIM11Provisioning.java:299)
  at oracle.iam.connectors.icfcommon.prov.ICProvisioningManager.createObject(ICProvisioningManager.java:277)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpICFCREATEOBJECT.CREATEOBJECT(adpICFCREATEOBJECT.java:109)
  at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpICFCREATEOBJECT.implementation(adpICFCREATEOBJECT.java:54)
  at com.thortech.xl.client.events.tcBaseEvent.run(tcBaseEvent.java:196)
  at com.thortech.xl.dataobj.tcDataObj.runEvent(tcDataObj.java:2492)
  at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(tcScheduleItem.java:3181)
  at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(tcScheduleItem.java:753)
  at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:604)
  
  Thank you
  Fyigit

  There is no such thing as the NULL field label

  You must create the field back in the form of process and map this field with search for provisioning. In this research CodeKey should be your form field in process and Decode __UID__

  Test again commissioning...

• Can I drag the event target source drag?

  I have adds drag and drop features of a tree control on a VI at several targets of slipping on different VI.  For example, they can drag the tree for a XY Chart on another VI, a table to an another VI, a digital indicator on an another VI, etc...  In addition, when they abandon the data, I need to know where he left it down and initiate an action from the drag source (tree control) VI.

  My problem is, I see no way to determine what VI and control the move action took place the.  I'm basically looking to the control reference of the operation drag and drop target once the drop event occurs.

  I know that I should add a few cases of event for all the different targets, but I try to keep the minimal code and keep most of the complexity of the VI with the source.  If I have, I will use some sort of a global or the driving force to write an identifier of the target VI to a place where the source VI can be read, but I'd rather not do that in many places so I don't have to.

  Create your own event type user 'Control' and save it in the same diagram as source Tree. On the event of filter "Drag start?" of the source tree, inject this event Ref use in drag data (it will take be flattened). Then, in the 'Drop' unflatten handler this Ref user event and send event user with the value of the event data "Ref" of this event handler 'drop '. It is a form of a callback function, which is much more reliable than a global engine or action that exposes the risks of racing conditions.

• substitute the target of the event

  Hi, I'm doing a simple table

  on mouse down, start drawing

  moving the mouse, if the drawing, draw the line

  on the mouse upward, stop drawing

  I put the headphones on a single clip with a rectangle. If I do not fill the rectangle, mouse events do not fall within the rectangle, but if I fill the rectangle, it will paint behind the rectangle, anyway I will not see any results succesfull.

  what I did was to create another sprite and paint it. something like

  rectangle.addEventListener (draw_in_sprite, etc.)

  Manager: function draw_in_sprite (etc) {}

  etc.

  other_sprite_above_rectangle. Graphics.Draw the following mouse() line

  etc.

  }

  I can't paint a long line, because once he finished the 'move' event, the focus seems to be on canvas sprite even though that I did not define top headphones

  I also try to move some other sprite based on the events of the mouse on the stage, but when the movement of the sprite he puts under the mouse pointer, the scene is not the target of the event more

  I read the documentation and he talks about cause 'propagation', I tried to put "Event.stopPropogation" in the script but I have seen no effect work and there is no examples and explanation doesn't say much. How can I say to cancel the event management on the sprites that are superior to others?

  TNX

  If you were to draw the rectangle through actionscript, you can then use the graphics class to draw the background 'upstairs'.  now, I'm also assuming that you are referring to a "custom cursor" as "another sprite" you want to move when drawing.  so if you do a little more of this via actionscript, you can resolve some of these issues.  throw the code below on the first picture of new doc and test

  Mouse.Hide ();

  var paint: Boolean = false;

  var chalk: Sprite = new Sprite();
  chalk.graphics.lineStyle (8, 0xFFFFFF);
  chalk.graphics.moveTo (0,0);
  chalk.graphics.lineTo (15, -15);
  chalk.mouseEnabled = false;
  addChild (chalk);

  var box: Sprite = new Sprite();
  box.graphics.beginFill (0x000000);
  box.graphics.drawRect (0,0,stage.stageWidth, stage.stageHeight);
  box.graphics.endFill ();
  addChildAt (box, 0);

  box.addEventListener (MouseEvent.MOUSE_DOWN, startPaint);
  box.addEventListener (MouseEvent.MOUSE_UP, stopPaint);
  box.addEventListener (MouseEvent.MOUSE_MOVE, moveChalk);

  function moveChalk(e:MouseEvent):void {}
  If (Paint) e.target.graphics.lineTo (mouseX, mouseY);
  Chalk.x = mouseX;
  Chalk.y = mouseY;
  e.updateAfterEvent ();
  }

  function startPaint(e:MouseEvent):void {}
  box.graphics.lineStyle (4, 0xFFFFFF);
  box.graphics.moveTo (mouseX, mouseY);
  Paint = true;
  }

  function stopPaint(e:MouseEvent):void {}
  Paint = false;
  }

• Events and Reminnders created the iPhone sync on iPad

  Hello

  I have a weird problem.  If I create events or reminders on my iPhone, they don't appear on my iPad, unless I have add an adverse event or a reminder on the iPad, then only my iPad syncs.

  If I create an event or a reminder on my iPad, it immediately appears on my iPhone.

  So I don't know what is happening?

  You have background refresh enabled App on your iPad? Settings > general > App Background Refresh?

• How to create a Structure of the event, repeating a task until a push a buttom

  Hello!

  I want to make a program that repeats a task until a push a buttom (indicating to begin another task). I know how to do this with a structure of the case, but I want to know how to deal with the event. Any idea?

  OK, I'm going to help you a bit.

  

  Here's how it works: the upper part (producer loop) will pass the value of the OK button (switch released) to the Message Handling loop (consumer).  When the button is true the consumer runs the code in the case of the real and enqueus another loyal to himself and then wait 1 second.  When the OK button is False, the value false is appeared on the front of the queue and the message handler runs if false, empty the rest of the queue and waits for the next message the event loop.

  The Stop button (by releasing Latch) exits the event and the queue is destroyed causing the Dequeue return an error and leaves the message loop.

  This is obviously an extremely simplified QMH.  To read up more about concepts go to file > Create Project > and click on the "More information" link