orphans of 3836ca659307978d66 files / i386.

Similar Questions

• Windows XP install error "File\i386\C_437.nls could not be loaded. The error code is 7. Setup cannot continue. Press a key to exit. "

  I've been setting up a windows xp professional operating system, I saw an error message "File\i386\C_437.nls could not be loaded. The error code is 7. Setup cannot continue. Press any key to exit", can anyone help me how can I solve this problem? Thank you.

  Hi HannaAntoun,

  See the article after some troubleshooting for your question:

  http://support.Microsoft.com/kb/330181

  I hope this helps!

• Microsoft xp pro installation issues help! line 1 inf file\i386\txtsetup.sif

  I'm trying to reinstall xp pro on my computer by using an installation disc and this is what comes up when I try to run it line 1 inf file\i386\txtsetup.sif

  What should I do to fix this? Thank you

  Hello

  I suggest you try the steps from the following link proposed by Shawn - Support Engineer dated October 27, 2009.
   http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/INF-file-txtsetupsif-status-12800-while-trying-to/c16b1d26-AD1C-46a7-b3fb-8702f7c2816f

  If the problem persists, then I suggest you to post.
  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

• I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup can not continue "when you try to reload windows xp on a computer problem. What should I do?

  I'm trying to "sweep" and reinstall windows XP pro on a computer that has had problems. I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup cannot continue to press a button to exit "as soon as I got the boot from the cd (and actually after a long break). Help, please!

  Hello

   
  Try the steps listed in the link below and check if it helps:

  "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

• File\i386\C-437.NLS could not be loaded. The error code is 32768

  Would somebody get out me of my question below?

  When I set up my operating system professional Window XP, an error message popped up as "File\i386\C_437.nls could not be loaded. The error code is 32 768. Setup cannot continue. Press any key to exit. "It's a brand-new product of geniue which I bought in Singapore from Microsoft on the Web.

  Now, I want to have the problem fixed so that I can be able to configure system. Thank you very much.

  Hello

  You can clean your system by using the disk cleanup utility (i.e. remove unwanted files from the system). I suggest you return the item mentioned below.

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  I also suggest you to extend the system C:\ drive and check if the problem is resolved.

  The partition size is extended, but the file system remains the original size when you extend an NTFS volume

  http://support.Microsoft.com/kb/832316

  How to extend a data volume in Windows Server 2003, Windows XP, in Windows 2000 and in Windows Server 2008

  http://support.Microsoft.com/kb/325590

  How to use disk management to configure dynamic disks in Windows XP

  http://support.Microsoft.com/kb/308424

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• When I install windows xp it shows error 'file \i386 \c_437.nls cannot be loaded. The error code is 4096 "?

  I have different files and folders in the other hard drive and also the F: drive is already installed with Linux.My c; disk space is only 8 MB. How to install windows xp?

  Check out these links:

  Error: "C_1252.nls file missing or corrupt" during startup
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;830088&product=winxp

  http://forums.techguy.org/Windows-XP/843866-horrible-virus-survives-reformat.html

  http://www.computing.NET/answers/Windows-2000/installation-headaches/55103.html

• error code 7 file\i386\halaacpi.dll can not bad, how to fix

  Impossible to reinstall xp after replacing hard drive cannot find hd error code 7 came

  Hello

  ·         When you get the error?

  This problem may occur if your XP installation CD is damaged. I suggest you to check if the installation CD is fine.

  I suggest you to check with another XP CD if you are able to install XP on the system or not.

• Some of the windows home CD files are necessary .___Please home edition insert windows CD-ROM into the drive selected below, and press okay.___E:\i386

  I need the file i386 install languages for Japanese and other oriental languages on my computer. I do not have the disk and I don't know where to download them from the site. It says browse and I know that there is a file i386 on my computer but I don't know which one to choose.

  I want to only download the East Asain languages for Japanese and etc. Thank you for your time

  Hi Alpha_Q,

  You are able to install? I386 files are also saved in your pc under C:\WINDOWS\ServicePackFiles\ServicePackCache

• MY question is on October 22 How can I restore file "SndVol32.exe" once I have it?

  I really do this more difficult by asking a similar question to the one I asked 8 months ago. It's my fault, so I'll try again.
  I need to answer the question that I want or I'll get an answer to a different question. I tell my students
  "It's a very good answer, now you answer the question I asked?

  I need to * run the file "SndVOL32.exe".    I got the file I386 on my installation disc and am now in
  My Documents and a flash drive.

  I'll open this one up;  Can someone tell me what to do with the file?        Please don't tell me where I can get him!

  Glen A Jacquart * address email is removed from the privacy *.

  Hi glenjacquart,

  -What version of the operating system is installed on your computer?

  If you have Windows XP, I suggest you to consult the following link to restore the SndVOL32.exe file.

  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add

• "Reinstall windows xp home edition__\i386\biosinfo.inf could not be loaded."

  OP: reinstall windows xp home edition

  I am trying to Setup. I changed the BIOS to read the CD of resettlement (never been used). I pressed F2 when starting and then "press any key to boot from the CD-ROM. I'm sure I did it correctly, as I did a Windows XP reinstall on another computer before with no problems.

  Anyway, then I get this message:

  File \i386\biosinfo.inf could not be loaded. The error code is 47872. Setup cannot continue. Press any key to exit.

  What is the problem and how do I get to the installation?

  see if it will let you enter the recovery console, This will tell you how (option 2)
  When you get the recovery console, type 'copy c:\WINDOWS\ServicePackFiles\i386\biosinfo.inf c:\WINDOWS\inf' without the qoutes. There should be a space between the copy and the c: and the first destination (at the end of the inf of the first part) and the second (just before the c: of the second) another one, all this should be no space. If that doesn't take care of the problem, then heres how do the installation of repair you asked
  http://www.michaelstevenstech.com/XPrepairinstall.htm http://support.Microsoft.com/kb/315341       

• "copy" i386 to D drive

  I did a naughty thing & just copied the file i386 for D drive.  I know I should have used the correct procedure using RUN etc. When I withdraw the C using the search Run etc. & transfer it on drive D just delete the 'copied '.

  Thanks Gormaur

  I did a naughty thing & just copied the file i386 for D drive.  I know I should have used the correct procedure using RUN etc. When I withdraw the C using the search Run etc. & transfer it on drive D just delete the 'copied '.

  Thanks Gormaur

  i386 directory is something OEM - not a thing from Microsoft.  It's features and others is determined by the manufacturer of your computer - not Microsoft.

• While trying to upgrade from Windows ME to Windows XP, you receive error - i386\WIN9XUPG\W95UPG. DLL.

  I want to upgrade a Compaq Presario 17XL360 Windows ME to Windows XP Professional, but no other solution I tried other forums worked to resolve the error message about missing file i386\WIN9XUPG\W95UPG. DLL. I don't have Roxio Easy CD Creator installed (a possible cause) and I tried end task on all except Windows Explorer and Systray (another recommended solution). I read that can be installed with 64 MB of RAM, I have, so I want to try to solve this problem without having to install more RAM, as I am trying to upgrade this computer at a lower cost to make a donation to a member of the family abroad.

  Thanks for your suggestion! You will see above, I tried but I didn't have the Roxio Easy CD Creator software in my computer. However, I found the solution. My mistake was trying to install Windows XP Professional as an upgrade, which did not.

  So I finally found a suggestion online that does not work.
  (1) I rebooted and selected "Press any key to boot from the CD" (something like that!) and installed Windows XP Pro as a new program.
  (2) I followed the instructions in the readme file, and when I got to the question of the partitions, I deleted the two existing partitions (one was where the old Windows ME operating system, and the other was a program 'system'.
  (3) after the removal of two partitions, I created a new one, following the instructions written in the installer and install Windows XP without problem.
  (4) Note: when trying to install XP as an upgrade and get the error above concerning the missing file and the cancellation, the computer still gave me the option to click "install". I tried a few times and each time, he told me that my product key is not valid. However, when I installed it as a new program, all installed easily and he accepted my product key invalid. So people, don't believe the message 'invalid' immediately, you can also have a valid product key.

  BUT I'll have to give in and buy more RAM, because I had only 64 MB and I need 256. Evidence? My first installation of the Norton Antivirus software, and then it was slowing my computer to a crawl. I'm trying to uninstall it now, and it takes a long time. Tomorrow I'll determine exactly what to buy and install.

  I hope this helps others solve this error - the support person level 2 Tech I contacted HP support earlier told me that they have the expertise to solve the problem. You can do it!

• How to let sfc.exe replace damaged dll cache files when presario v3000 does not see xp pro cd?

  Hello

  SFC. EXE/scannow ask me to put my xp pro disk, so it can copy files into the dll cache.  When I put the disc in the cd drive, he said something to the effect of "you must have used the wrong disc or the disc is damaged" and just stop there.

  My cd/dvd drive is not presented in win Explorer or the Manager of devices for about 2 months now.  I did each every every thing, including the removal of the upper and lower filters 2 weeks ago (I deleted the wrong key registrey and just now in my office!).  I do not think that caused sp3 cd player to disappear, as I've been running for a very long time now and the cd player that disappears is fairly recent.

  My question is: How can I get the dll files in my cache dll if my cd player does not work?  Maybe corrupt dll files are what initially is the cd player to disappear.  I tried to copy files to a flashdrive system32 but sfc will seek only a cd player.

  Thank you very much...

  Liliane

  Hello

  SFC. EXE/scannow ask me to put my xp pro disk, so it can copy files into the dll cache.  When I put the disc in the cd drive, he said something to the effect of "you must have used the wrong disc or the disc is damaged" and just stop there.

  My cd/dvd drive is not presented in win Explorer or the Manager of devices for about 2 months now.  I did each every every thing, including the removal of the upper and lower filters 2 weeks ago (I deleted the wrong key registrey and just now in my office!).  I do not think that caused sp3 cd player to disappear, as I've been running for a very long time now and the cd player that disappears is fairly recent.

  My question is: How can I get the dll files in my cache dll if my cd player does not work?  Maybe corrupt dll files are what initially is the cd player to disappear.  I tried to copy files to a flashdrive system32 but sfc will seek only a cd player.

  Thank you very much...

  Liliane

  First, run fix cd carpet first to see if it will solve your problem with your devive rom.

  http://support.Microsoft.com/kb/982116

  A description of sfc / scannow from MS.

  "System File Checker allows an administrator to analyze the files all protected to check their versions." If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker. »

  http://support.Microsoft.com/kb/310747

  When you receive the error message you have inserted the wrong disk, it could be the drive has bad service pack, or it could be that the system searches for the wrong drive.

  Click Start > run > type regedit > click ok.

  Navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup . Click the "setup" folder to expand the content in the right pane. Scroll through the list in the right pane and look for "SourcePath". Make sure that the source path is set to the drive letter of the rom of the device.

  If the source path is set correctly, I suspect that the disc contains a pack of different service that is installed on the computer. There is a solution to this as well.

  Click on the link below and download the Service Pack 3 for IT Tech. Save the file. Once the download download and install the trial version of Winrar from the second link below. After Winrar is installed, right click on the Service pack 3 file and choose "Extract here" with Winrar. When the extract window opens type C:\ in the location of file for the files to be extracted. This will place the file i386 in the root of the C drive. Then, return to the instructions above for the source path and replace the source C:\ path. Now, run sfc/scannow again.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

  http://download.CNET.com/WinRAR-32-bit/3000-2250_4-10007677.html

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Orphaned snapshots after Consolidation?

  My classmates one of our servers to the left with a snapshot on it for MORE than 6 months, so that the hypervisor ran out of space.  I'm, «Believe» at this point, the file delata, once he ran out of space, was coruupt, as he could not continue to add data in the Delta.  Being a limited space, I quickly STOP the machine virtual and tried the trick, to make a SMALL snapshot, with the machine turned off and then went to snapshit Manager and chose, 'DELETE ALL'... of course the space on the data store was NOT 1.5 times more than snapshots, if removing it does not.  I thought at this point, it would be better to migrate the virtual computer in a data store that is large enough to perform the consolidation.  I mounted a datastore NFS to the hypervisor, deleted the current virtual incentory computer and made a COPY of the virtual machine to the new data store, which has been a success.  I then tried to start the virtual machine, and first he failed, because of course, the snapshot that was used for the virtual hard disk was corrupt.  At this point, I analyzed the data, I looked through the VMDK to determne which was the last good snapshot VMDK.  I found and edited ther. VMX file to point at him and of course, start the VM.  A good result.  I then turned it off, make a small snapshot again and then choose REMOVE ALL.  This time it went through successfully.  My VM is not pointed at the BASE vmdk-flat file.  BUT, I seem to have ORPHANED vmdk delta files, what is the best way to deal with this?  If you need logs please let me know.

  My goal is to clean all orpahned uneeded files and then copy the virtual computer to the original data store.

  PS - my only real concern is at this point that there seems to be some delta files hang out, although I DO NOT believe that they are used, since I showed up my base vmdk, after consolidation through the snapshit Manager.

  Impatience of all advice.  Thanks in advance.

  I'm still confused! It's the same VM we talked to Re: orphan Snapshots after Consolidation?.

  Since the snapshot (1, 3, 4, 2 Basic) string is equal to 'PowerSchoolTestWeb.vmdk', you can use the same command as shown in Re: orphan Snapshots after Consolidation? - with just replace the name of hard - to clone the virtual disk.

  André

• Is it possible to identify orphans using Dreamweaver on a remote server?

  I have not used the option of orphans on Dreamweaver before. I used to create my pages, download them and then remove it from my local system (the site on which I work is too much to have on my local machine). The problem I've encountered is that there are a lot of orphaned files on this web server. Is it possible to have dreamweaver to go looking for them, or the whole site should be local? It is a bit of a long shot, but I thought that I would like to ask because I'm rather at my wits end.

  If it helps, the Web server is runing SunOS, and my Local computer is runing Windows XP with CS5

  Checking for orphaned files with Dreamweaver

  DW has a built-in feature that will check links in the local site folder and it will identify all the unused files in the results panel. This feature is integrated into the 'Check links' utility of Dreamweaver in the Site menu.  After that the software checks links, it gives you a report of all the unused files, you can either remove or add a link to.

  The following products of part 3 are useful tools for webmasters who want to keep their web space organized and well maintained.

  Of Inspyder OrFind will be "analyze your site" and to identify the HTML pages and images which are no longer used.  The software can be configured to automatically delete these files, and it even will send you by email a report if files are changed. This can provide a webmaster with peace of mind, knowing that if their Web space gets hacked, they will be alerted. There is a free trial available. Afterwards, you must pay for the software to continue using it.

  Link HTML Validator, published in 2007 by Lithops, check your website for broken links, regardless of the number of pages that your site has. This software is another class of' Spider Web' that Thames through your web pages and identifies the orphaned files web site.  The software is a Shareware, but you must register and pay to use the full version.

  FindOrphan is a simple application created by SobolSoft who will search your HTML, PHP and ASP local files all files not related, including media such as images and video files.

  Linx Explorer of NOVOSIB software will check all the links on your website to check broken links, and it will also detect all files not related to your web directory and provide you with a report.

  SiteCleaner is a Mac software created by the Studios of rabbit's foot that will have all the files and the code for your web project and "clean" html files or media all orphans. Deleted files are placed in a folder "deleted content".

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB