ICH9M-E/M SATA AHCI Controller

Similar Questions

• Satellite L555-10N: driver for WIN 7 64 bit SATA AHCI controller

  Hello

  can someone help me find a driver SATA AHCI controller for a fresh install of Win7 64 bit.
  Win7 OS installer asks drivers to storage before installation of operating system start. Normally he accepts driver .inf and .sys, but not such drivers in the driver package StorageManager, found on the driver Toshiba download page.

  We can I find this driver for the installation of the OS?

  I installed Win7 on several machines, but I've never used driver SATA. The HARD drive was recognized by the system each time.
  Visit the Intel download page. I'm sure you can download the SATA driver it.

  https://Downloadcenter.Intel.com/

• SSD and VN7 591 G Standard SATA AHCI Controller

  Hello

  Bought a 70RT with Windows 8.1 VN7 591 G

  I installed a Samsung SSD and cloned the operating system with the Samsung software for these purposes. The BONE was very quick start, only 6 seconds. But the operating system was not a good performance (apps crashing and other things) tried to re-do everything a couple of times without success. So I couldn't start of the OS on the SSD, so I went to a friend and him formatted my HARD drive and install a fresh copy of windows on the SSD and successful 8.1 to do start.  (I installed all the drivers, that I could find)

  Now the operating system starts in 12 and 13 seconds. And discovered that he can miss some driver like it using the standard SATA AHCI controller. (can't say if that was something else before I didn't look more than)

  

  If anyone with a portable Nitro V that came from the factory with a SSD could look over that and tell me if there is any other controller. I'd be happy.

  I am also having wifi issues. I don't have that before I reinstall windows. I installed the drivers and the patch, but nothing. I have to keep opening to the top of the installation of the drivers and click on repair to get 10-15 mintues of good connection...

  Another little thing bothering me is the touchpad. I could double tap with a finger on a scroll bar and drag it. now it does not work like that (I can still use the 2 finger gesture). Installing the synaptics drivers but can't make it work as before. Im not able to scroll using the right side of the touchpad no longer.

  I appreciate all the help,

  Thanks in advance!

  on the SATA drivers, have you already installed the Intel chipset drivers?

  http://us.Acer.com/AC/en/us/content/drivers/5614;-; Longs % 20VN7 - 591G

  also, I would check SSD cache:

  in Device Manager, click on hard drives, double-click on the SSD drive, click on policies and check if both options are selected, click OK, and restart.

• E520 - driver Intel SATA AHCI Controller driver for Windows 7 (64-bit)

  Hi guys, can I apply for assistance with Intel SATA controller AHCI Driver for Windows 7 (64-bit), please? I went to the drivers download page and I chose my laptop (ThinkPad Edge E520 1143 - 37G), then the pilot of storage, but when I click on Intel SATA AHCI Controller driver for Windows 7 (64 bit) nothing happens. 32-bit is available for download tho. Thx a lot for suspicion

  Hi trueblue666,

  I sent lenovo feedback to his subject, the driver must appear on the next page once that they fix it:- http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-74273

  I hope this helps.

• Driver will install - Intel Corporation - storage controller - Intel (r) 7 series/C216 Chipset Family SATA AHCI Controller

  Windows 8 cannot install this driver... trying to repeat.

  What he has in the BIOS?  ATA or AHCI?

• Date of Intel Corporation - storage controller - Intel (r) 7 Series Chipset Family SATA AHCI Controller Installation: 1 / 6 / 2016 22:26 Installation status: Details of the failure error message: Code 80070103

  • 0 x 80070103
    Please give the solution for this?

  Hello

  Thank you for your response. I appreciate your time.

  I suggest you to refer to the link below and check if this is useful:

  Windows Update, error 0 x 80070103

  I hope this helps.

  Sincerely,

  Ankit Rajput

• Download driver driver Intel (r) 7 series/C216 Chipset Family SATA AHCI Controller - 1E02

  Troubleshooting does not solve it and I get an error message. Is it important, or should I reinstall the driver? Also, I tried to google, the driver and I can't find anything. Help, please.

  I have this same chipset on my Acer laptop and installed the Acer driver for it. I advise you to do the same to your MB/PC manufacturer.

  SC Tom

• XP Sata AHCI Driver/help for Pavilion dv6t-2100?

  I need to downgrade laptop my sister to Windows XP, due to some compatibility issues with his favorite game. It's a DV6t-2100, as I said in the title, and I looked everywhere for the driver! I found an AHCI driver here on the Intel site, but I don't know that one to install from the file iaAHCI. Here is the list. Those with x. I've used. I have a limited amount of CD so I don't want to keep wasting them:

  AHCI controllers:
  -Intel Desktop/Workstation/Server Express Chipset SATA AHCI Controller
  -Mobile Intel (r) Express Chipset SATA AHCI Controller

  X Intel 5 Series/3400 Series SATA AHCI Controller
  -Intel (r) 5 Series 4 Port SATA AHCI Controller
  -Intel (r) 5 Series 6 Port SATA AHCI Controller
  -Intel(r) ICH10D / DO SATA AHCI Controller
  -Intel ICH10R SATA AHCI Controller
  -Intel(r) EP80579 SATA AHCI Controller
  X Intel(r) ICH9M-E/M SATA AHCI Controller
  -Intel ICH9R / / DH SATA AHCI Controller
  -Intel(r) ICH8M-E/M SATA AHCI Controller
  -Intel(r) ICH8R/DH / SATA AHCI Controller
  -Intel ESB2 SATA AHCI Controller
  -Intel(r) ICH7M/MDH SATA AHCI Controller
  -Intel ICH7R/DH SATA AHCI Controller

  Thanks in advance.

  Hello:

  Please read the XP downgrade guide at the link below:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/General-XP-downgrade-Guide-for-HP-laptops/TD-p/83267

  Consult the instructions for your model in the guide, which is located under 'Models difficult.'

  Paul

• Compaq 610: [Compaq 610, P/N: NX550EA #ACB] latest driver for the SATA AHCI for Win 7 PRO SP1 RUS x 64 controller.

  Hello world!

  Could someone, please, tell me, why there is no driver SATA AHCI controller for Compaq 610 for Win 7 PRO SP1 RUS x 64 in the download section of HP support for Compaq 610?

  (01) where can I get the latest version of the SATA AHCI controller driver for Compaq 610 for Win 7 PRO SP1 RUS x 64?

  (02) the original Intel (r) Matrix Storage Manager V8.9.0. 1023 will replace the ' Standart controller SATA AHCI 1.0 (Microsoft) "(v. 21.06.2006 6.1.7601.18231) with the more recent/latest version?

  (03) will be the upgrade of the SATA AHCI driver improve the speed of read/write of my any percentage HARD drives or this idea is nonsense and absolutely useless?

  I'll be very grateful for any useful info! Respectfully, Tianuchka))

  Hello:

  I would use it to HP... the description tells you what it does.

  The HP 6910P has the same controller and chipset as the 610 HP.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3357379 & swItemId = ob_85204_3 & swEnvOid = 4059 #tab1

  Who answers your questions first 2.

  Regarding the 3rd, I don't know whether or not you notice an improvement.

  If you want to update the driver, you can also install the last utility Intel chipset installation from the link below.

  Download, unzip and run the setup.exe file.  Then restart the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format

• Qosmio G50 change IDE to AHCI controller

  Hello
  I recently bought an SSD
  and the wand to increase its performance and the Firmware upgrade by changing the IDE SATA AHCI controller
  How can I change from AHCI? through the BIOS, I don't see any indication in the BIOS
  I read all disks to increase performance by changing the IDE SATA AHCI controller

  > wand to increase its performance and the Firmware upgrade by changing the IDE SATA AHCI controller
  May I ask if you are sure that something like this exists? I've never heard any update firmware for the IDE controller.

  Of course, you can update the BIOS and can install the SATA drivers that control the HARD disk controller, but you won't find any update of the firmware.

  > I read all disks to increase performance by changing the IDE SATA AHCI controller
  I know such option is available, not for all laptops and it is available only with the Phoenix BIOS.
  The G50 supports Toshiba BIOS and the HARD drive controller is always to SATA (AHCI).
  This means that you can not change it to IDE, and so the performance can be reduced or increased.

  In order to install a new OS, you must eat of storage which includes SATA drivers.

• No SATA AHCI driver for 6440 b

  Hi all!

  * Yes, I have read the sticky on the SATA drivers - did not help.

  Us have just bought 5 laptop computers HP 6440 b to test (and would buy a lot more), but we have a problem with the installation of win XP on it when mode = AHCI - just SATA cannot find a driver for it! The latest Intel Matrix Storage Manager driver does not contain the AHCI drivers for these:

  Hi again,

  Slipstream only 6 Port of PCHM SATA AHCI Controller driver with your XP CD-DVD "blank." Use this driver Intel Sata.

  There is error in the guide that I found.

• EliteBook 8440p with xp, problem peripheral ahci controller and radio wirelles not detect networks

  To install XP in AHCI mode do not work, after work in the bios to "ide mode".

  Once installed, place all the drivers. I have 2 problems:

  1. the wireless is active, but not find any network

  2. If I go back to AHCI mode in the bios, I've got blu screen, system error (load by floppy disk driver in question)

  Recommendations?  Solutions?

  thankss!

  Hello:

  Copy all of the Intel AHCI files on a floppy disk, and then select the Intel (r) 5 Series 4 Port SATA AHCI Controller.

  According to this manual, on page 11, which is the driver you need, or you can try with your current installation using my method above.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02551975/c02551975.PDF

  Intel (r) 5 Series 4 Port SATA AHCI Controller

  The wireless...

  I do not know. If it works, it should detect the network and according to your screenshot of the Device Manager, it shows that it is correctly installed.

  Paul

• driver SATA AHCI of 64 - bit - Compatible with HP 6910P or not?

  I have a HP 6910P 64-bit Windows 7 Professional.

  I've recently updated the primary drive to a HARD drive to 120 GB for a 128 GB SSD. However, the performance gain was minimal.

  Checking, I discovered that AHCI is not enabled and there is an option to do so in the BIOS (to date).

  The HP Web site lists a compatible 32-bit version (7.6.0.1011 REV: C) SATA AHCI driver for this model of laptop.

  However, despite quoting the same version (7.6.0.1011 REV: C) the 64-bit version does not list the laptop of HP 6910P under the list of compatible hardware.

  Is it simply an oversight or is there a valid reason, why the 32-bit version of the driver is compatible so that 64-bit is not?

  You are the very welcome, Drambo.

  I have provided the driver because I thought that you would just install the driver mode IDE restart and change SATA configuration native from disabled to "Enabled".

  Since you changed to "Enabled" SATA Native Mode and then reinstalled W7, you need do nothing else.

  How can you tell that the AHCI is enabled?

  Go to Device Manager and click on IDE ATA/ATAPI Controller section.

  You will find your controller SATA AHCI enumerated (Intel(r) ICH8M-E/M SATA AHCI Controller).

  If the BIOS has not been set to AHCI, the controller would have said, it was an ICH8 Serial ATA Controller, or words to that effect.

  Paul

• Satellite P300D-10U - how to enable the AHCI controller in the Bios

  I have toshiba satellite P300D-10U with windows vista 32-bit, disc ssd drive 2nd hard drive
  and I can't do IT controller SATA AHCI in the bios.

  http://www.Toshiba.EU/discontinued-products/satellite-P300D-10U/

  What can I do?
  install the new windows 7 32 / 64-bit and updated the bios for this maybe windows I can ON AHCI Controller in bios

  This bios has the ability to run on AHCI?

  Thanks for replying,
  Thank you.

  BIOS of the screen:
  http://ImageShack.com/a/img745/6711/ez591J.gif
  http://ImageShack.com/a/img901/7149/SRjUz3.gif
  http://ImageShack.com/a/img743/7539/8Pt5ro.gif
  http://ImageShack.com/a/img901/8573/iPfiOZ.gif
  http://ImageShack.com/a/img746/7872/T3nBfa.gif

  SSD of the screen
  http://ImageShack.com/a/img908/4148/ZjaDr1.gif
  http://ImageShack.com/a/img661/9900/846hMR.gif

  I changed the value to 0
  HKEY_LOCAL_MACHINE es\Msahci

  I install ATi SATA2 RAID (pilot preinstallation)
  http://www.gigabyte.com/products/product-page.aspx?pid=2500#DL

  CD..

  To my knowledge, the Satellite P300 series BIOS doesn t contain the ability to switch the AHCI compatible mode.

  I don t think that even after updating the BIOS such option would be available in the BIOS.

  I see on the first screenshot of the BIOS, the SSD drive is connected to the second controller.
  I recommend you connect the SSD to the first controller (instead of the HARD disk).
  Maybe then you could get better performance.

  Just for the note: portable computers with a graphics card ATI supports the AMD chipset, and in this case the ATI graphics card driver contains the SATA driver files.

  However, I guess the HARD disk controller specification allows the use of better performance of SSD drive.

• Equium P200D how to enable SATA AHCI mode so I can install OSx86

  Hi im trying to install OSx86 on my new laptop Satellite P200D-139 I bought this week.
  I need SATA AHCI mode value. All other pc, I used, I was able to do it in the bios but with this laptop, the bios is so cut off from the option isn't there.
  Does anyone know how to enable AHCI mode so I can get OSx86 to start.

  Thank you
  Mark

  If I'm not mistaken, you get the famous message "still waiting for root device", right?
  Well, I really do not have much experience in the Mac OS, but it appears because of SATA drives and Yes, you're right, AHCI mode works for most of the laptops or desktop computers.

  I think there is no way to activate this option. But you may find help looking for some instructions on osx86project in google.