Equium P200D how to enable SATA AHCI mode so I can install OSx86

Similar Questions

• Satellite A100 - 906 (PSAA9E) how to enable the ahci?

  How to enable ahci on this laptop.
  Debian Lenny

  * lspci: *.
  + 00:1F.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 family) SATA IDE Controller (rev 02) (prog-if 80 [Master]) +.
  + Subsystem "": Toshiba America information systems Device ff10 +.
  + Control: I/o Mem - BusMaster + SpecCycle-MemWINV-VGASnoop-ParErr-Stepping-SERR-FastB2B-DisINTx-+
  + Status: Cap + 66 MHz + UDF - FastB2B + ParErr - DEVSEL = medium > TAbort - < TAbort - < MAbort > - SERR - < PERR-INTx-+
  + Latency: 0 +.
  + Interruption: axis B routed to IRQ 19 +.
  + Region 0: Ports i/o to 01f0 [size = 8] +.
  + Region 1: Ports i/o 03f4 [size = 1] +.
  + Region 2: Ports i/o to 0170 [size = 8] +.
  + Zone 3: Ports i/o to 0374 [size = 1] +.
  + Region 4: Ports i/o to b 18-0 [size = 16] +.
  + Features: [70] power management version 2 +.
  + Flags: PMEClk - DSI-D1-D2-AuxCurrent = 0mA SME (D0, D1 - D2-, + D3hot, D3cold-) +.
  + Status: SMB-Enable-DSel D0 = 0 = 0 SME DScale-+.
  + Kernel driver used: ata_piix +.
  + Kernel modules: ide-pci-generic, ata_piix, ata_generic +.

  * cat/var/log/dmesg | grep NCQ: *.
  + ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32) +.

  In the BIOS there is no parameter 'AHCI' or 'Native Mode '.

  Who is to blame and what to do, gentlemen?

  Hello

  The AHCI is enabled if there is no option in the BIOS.
  The controller AHCI (SATA) HARD drive need a driver SATA to install an OS system on the HARD drive.

  I put t know what it takes to Linux but on Windows operating system, you must install the SATA driver, which is part of the Intel storage Manger.

• How to enable the AHCI for HP ENVY TouchSmart m6-k015dx Sleekbook

  Hello

  I upgraded my hard drive to an SSD and it's done. Laptop works very well.  The Samsung SSD software installed and it says that I need to enable AHCI to get the SSD running at full capacity.

  I searched the BIOS and don't see anywhere to change that.  I then went to the Device Manager in Windows 8.1and I don't see any ATA/SATA controller.  All I see is a RAID controller. RAID controller in a laptop?

  Can someone tell me how to activate the AHCI?

  Thank you.

  

  Hello:

  Because your laptop is a portable consumer there is no way to change the BIOS to AHCI setting.

  The BIOS is set by default for RAID on your model series because some models come with one of these drives covering with a SSD and for a technical reason, that those who must be configured in RAID 0 mode so that Setup work right.

  It is my understanding that if you install the latest driver Intel RST, which is supposed to support TRIM SSD starting with the Intel 7 series chipset, and yours has series 8, so he must have full support for one SSD usage even in RAID mode.

• How to enable the AHCI for SSD on M6-1010TX laptop computer HP

  HELO

  Have tried to install an EVO of 840 Samsung 240 GB SSD on my laptop of M6-1010TX with WIN7x64 i5/4 GB and running.

  The SSD seems to work OK, but I when I run Samsung magician this is a warning that it must be set to AHCI.

  Also, most of the menu items are grayed out and unavailable in Wizard, so I can't see or adjust all parameters. I don't even know if the TRIM work.

  There is no possibility of setting to AHCI in the BIOS. (In fact there is no provision for seting pretty much anything in the BIOS)

  I've seen a remedy to a similar problem on this forum under 'How to enable AHCI for HP ENVY TouchSmart m6-k015dx Sleekbook' which offers to upgrade to the latest version of Intel RST, which is supposed to give favor SSD attitude to go with the 7 series Intel chipset.

  I already have the updated HP version of installed RST (2012-05-04 11.1.0.1006), but the Intel site has versions up to 13.1.0.1058 in date 27-05-2014.

  Anyone know if these later versions of Intel are safe to install?

  PS - I 840 Samsung SSD EVO running on 2 HP ProBooks's a little older, and they run like lightning.

  A simple setting in the BIOS to enable the AHCI is available on these. Why not in the new M6?

  Thank you

  OK Hüffer---> we have a update

  I had the opportunity to re - install the SSD drive this morning.

  It seems that you were mostly correct, but there is also a bit of a conflict between the Samsung software and HP hardware.

  When I re-installed this time I connected the SSD in USB BEFORE installing the software (Samsung instructions say to connect AFTER insalling software). This has resulted in much better recognition of the SSD and all the options are now available in Sasung magician.

  EXCEPT - 1. He always warns AHCI mode being "Deactivated (IDE or RAID).

  2. it does not recognize the SATA 3 Interface

  HOWEVER - it seems to work quite fantasmagorically FAAAAAAST

  Samsung Benchmark gives random read/write speeds about 30% above their maximum rate quotes

  These reference speeds are about double what I get from the above, 2 HP ProBooks who have SATA 2 interfaces, so it seems that the SATA3 interface actually works correctly.

  I am now very happy with this performance (but I wish that AHCI warnings were not there)

  So the secret seems to be to connect the SSD drive first and do believe not all alerts when the evidence says it actually works OK.

  Thank you once again to Hüffer,

  Hawkeye

• Satellite P100: How to activate the AHCI mode?

  As all you know, some laptops P100 series are equipped with a controller Intel 82801GBM SATA natively supports the AHCI and with a Fujitsu HDD which takes in charge the NCQ.

  However, the disc is forced in compatibility mode, and therefore the NCQ is disabled, resulting in a loss of performance (which is certainly necessary that laptop hard drives are generally slower than those of office).

  Unfortunately, there is no option in the BIOS which activates the AHCI mode and no tool like HWUtility that can twist that (although it wouldn't work). As far as I know, newer laptops support AHCI mode and there is also an option in the BIOS to enable it.

  Is it possible to activate the AHCI mode in our laptops beloved and make the most of our hard drives?

  Hello

  Do you think that the AHCI is disabled?
  You can run the Intel Chipset ID utility to determine if the ICH7DH SATA controller is already running in AHCI or not.

  However, I studied a little more on other forums that are a little more specific and find this:
  Activate the AHCI on Intel chipsets, without having to reinstall Windows 2000/XP
  http://www.Neowin.NET/forum/index.php?showtopic=457699
  and
  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-62909

  But you know, everything you make are at your own risk!

• How to enable the AHCI in HP pavilion dv6700t?

  Hello

  I was wondering if it was possible to enable the AHCI on my pavilion dv6700t.  Chipset intel is a much older model, P965 of 2008 but still works fine.

  In Manager devices, under IDE ATA/ATAPI controllers, he says that the ich8m-e/m sata AHCI is enabled.  It is reasonable to assume that AHCI is therefore already activated? I have no way to do it via the BIOS, which limited configuration options. It's the PhoenixBIOS l58.

  I am considering installing a SSD as my boot (and only) and I read that the AHCI is important for functions such as the NCQ, etc..

  Thanks for your wisdom!

  Jason

  Hi, Jason:

  Yes, that's correct.

  AHCI is enabled by default.

  This is why everyone struggled to install XP on laptops. AHCI drivers must be loaded before installing XP at the prompt F6 or slipstreamed into a copy of the XP Setup disk.

  Now... you can do whatever you want, but I don't know of anyone on this forum who has installed an SSD in any model dv6000/dv9000 Series notebook.

  If you know it's possible, thanks for posting back after installing a SSD and let us know how you did.

  Paul

• Satellite P300D-10U - how to enable the AHCI controller in the Bios

  I have toshiba satellite P300D-10U with windows vista 32-bit, disc ssd drive 2nd hard drive
  and I can't do IT controller SATA AHCI in the bios.

  http://www.Toshiba.EU/discontinued-products/satellite-P300D-10U/

  What can I do?
  install the new windows 7 32 / 64-bit and updated the bios for this maybe windows I can ON AHCI Controller in bios

  This bios has the ability to run on AHCI?

  Thanks for replying,
  Thank you.

  BIOS of the screen:
  http://ImageShack.com/a/img745/6711/ez591J.gif
  http://ImageShack.com/a/img901/7149/SRjUz3.gif
  http://ImageShack.com/a/img743/7539/8Pt5ro.gif
  http://ImageShack.com/a/img901/8573/iPfiOZ.gif
  http://ImageShack.com/a/img746/7872/T3nBfa.gif

  SSD of the screen
  http://ImageShack.com/a/img908/4148/ZjaDr1.gif
  http://ImageShack.com/a/img661/9900/846hMR.gif

  I changed the value to 0
  HKEY_LOCAL_MACHINE es\Msahci

  I install ATi SATA2 RAID (pilot preinstallation)
  http://www.gigabyte.com/products/product-page.aspx?pid=2500#DL

  CD..

  To my knowledge, the Satellite P300 series BIOS doesn t contain the ability to switch the AHCI compatible mode.

  I don t think that even after updating the BIOS such option would be available in the BIOS.

  I see on the first screenshot of the BIOS, the SSD drive is connected to the second controller.
  I recommend you connect the SSD to the first controller (instead of the HARD disk).
  Maybe then you could get better performance.

  Just for the note: portable computers with a graphics card ATI supports the AMD chipset, and in this case the ATI graphics card driver contains the SATA driver files.

  However, I guess the HARD disk controller specification allows the use of better performance of SSD drive.

• How to activate the AHCI Mode on an HP Mini Notebook 210-2000?

  I just need to know so that I can install Windows 7 Premium and replace Windows 7 Starter on this subject. I don't see the option anywhere in the BIOS, which is the version InsydeH20 F.13.

  Thanks in advance.

  Hello:

  AHCI is enabled by default and the setting can be changed to anything else.

  Paul

• How to unregister a computer broke so I can install Cs6 on other computers?

  Hello!  I have failed and could use some help.  I have two computers, one of which does not work at all.  Both of these computers have my Adobe Cs6 Suite installed on it.  I want to cancel the registration of these computers so that I can install and use the Cs6 Suite on two other computers.  How can I cancel both of these computers, especially when I can no longer use the broken computer?

  Thank you for your time and help!

  When you have a non-functional computer and cannot turn off

  Don't forget to request ONLY activation support set your number of activations

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990

• Satellite A100: How do I enable SATA NATIVE mode

  Hello, my laptop Satellite A100 PSAA9 and the southbridge is an ICH7M
  I put an SSD in my laptop and the drive controller is locked-> Ultra DMA 6 IDE compatible mode.
  I would switch to the native SATA-1 to increase the bandwidth (from 110 MB/s-150), but I can't find any setting so that, in the last BIOS 6.00

  I think that maybe in the past, Toshiba has enable this feature, but I suppose they might have turned it off for beginners who don't know how to install the SATA drivers during the installation of Windows.

  I found Toshiba BIOS database, but it is locked by a password.
  I'm willing to test any BIOS that could re - enable native SATA mode

  + The message was edited: link has been removed - unauthorized +.

  Hello

  You need the native SATA controller?

  The laptop was equipped with a controller SATA interface supports the Serial ATA Rev. 1. 0a.

  Some laptop models take a BIOS that contains a SATA mode option.
  This option can be changed on AHCI or in compatibility mode.

  But as far as I know a100 BIOS does not contain these settings

• SATA AHCI mode with sata hard disk ok, but can I use RAID in another way?

  I put the SATA mode in the BIOS of the card from my mother on AHCI to run with my Asus P5Q - PRO, but I would use raid technology to create a mirror of my hard drive...

  In my bios, I can select RAID mode in storage controller but I use AHCI, there is another way to use RAID 1?

  Thank you

  You will copy a machine in another directory using the data store Navigator. How the ESXi host know, what to do with that? You might copied it for any purpose.

  If you go and add this new machine inventory. It's nothing that of using the menu appropriate in VI-Client and opted to add an already existing comments.

• How to enable the AHCI for HP Envy M6 1205dx.

  I just bought a Samsung 250 GB SSD EVO. One of the important things to do is to activate the AHCI. I can't find this option in my BIOS. How can I activate it?

  Hello

  This is the default option in the BIOS.

  Kind regards.

• Equium P200D - how to increase the memory of the GPU?

  Hello

  I have a portable Satellite P200D-139 and I was wondering if there is a way to increase the memory of the GPU?

  This model of laptop is not known to me, but if there are shared memory graphics card you can extend it if you upgrade RAM.
  Check the specs of the laptop and see what amount of RAM max for this model of laptop is. I assume it must be 4 GB.

  By the way: check http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=43021

• How to 'disconnect' of all computers so I can install applications on the new OS

  Hi guys,.

  Ive had a problem.  I have CC apps installed on two old computers, which is DOA, the other was recently reimagee.  My CC license allows two installs at the same time, and I have more access to applications on these "computers" to uninstall / they are disconnected.

  My incredible access to Adobe help last week gave rise to a chat session of four hours in which he ended by telling me to go on the forums (thank you very much..).  Now my access help took end and im not about to get the problem solved.  I looked to cancel my subscription and start a new, but because it was purchased through an enterprise agreement, apparently id is locked this buyback until September when I started it.

  Any ideas?  In the past, ive consulted software doubtful, but is gone for the right option and paid correctly this time... and honestly look of piracy being prompted again.

  :/

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 clouds can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• How do we uninstall InDesign CS6 so I can install CC version

  I can not update InDesign CC - I get an error of Installation has failed. I have CS6 on my computer and I can't uninstall it using the Windows Control Panel or the cleaning of Adobe tool. Windows Control Panel returns a failed uninstall error and sends me to the Adobe cleaning tool. The cleaning of Adobe tool does not see the CS6 of InDesign version to unistall it.

  In addition, I can't open InDesign CS6 - when I try to open it, nothing happens.

  Help!

  I used the cleanup tool to remove the incomplete installation of InDesign CC.

  I downloaded and reinstalled InDesgin CS6

  Which corrects the problem.