iCloud storage can be shared within the family group?

Similar Questions

• A single storage backup subscription can be shared with all family shared devices?

  A single storage backup subscription can be shared with all family shared devices?

  I have a family membership of 200 GB storage for 5 of my iPhone backups under an account id unique apple.

  I'm separating each iPhone at its own apple ID to avoid current problems. Can I share the backup of the storage with the family share?

  If I can't, I'll have to buy a subscription to backup for each device that will be more expensive.

  Unfortunately, iCloud storage cannot be shared under sharing of family.  See more details here- family shares - Apple Support

• Where can I register for the sharing of the family?

  I can't find where I can register for family sharing.  I have connected to my account iCloud as the person who will be responsible, and I don't see an option in the settings.  With the help of family sharing stuff would be appreciated. I have 2 teenagers with their own accounts iCloud and an elementary kid who we do not want to constantly make additional funds for applications and music, that someone has already purchased in our family.  Thank you.

  Here are several links that will tell you all about the sharing of the family.

  Family sharing

  Family sharing and Apple ID for children

  A Guide for family sharing - iCloud

  Sharing content with the sharing of the family bought

  iCloud - family sharingrt

  Implement the family sharing

• IPhone 4 ios 7 can not get on the family sharing for itunes

  Hi, my son got a new second hand phone. try to get him on the family sharing so he can listen to the music, but whenever he's trying to do a song, his view as a purchase. his name is included, but it has version 7. We have updated the phone on itunes and its not updated it to ios8 one had success with this?

  Thank you

  Hello evechoccy!

  Thanks for reaching out on the share of the family option does not arise with the iPhone of your son 4.

  The reason for this is the iPhone 4 can only go to iOS 7 and sharing of the family did not become an option until iOS 8 and later versions. You can see the family sharing requirements here: family shares - Apple Support

  Kind regards.

• confused on the sharing of the family

  I was watching the apple music and sharing family came. I know that my family has all different apple ID and I was wondering because some of us do have a credit card for this that we can simply use our gift cards without having to ask the main person for permission, because we have our own apple ID. For example: whenever someone wants to get and app or film it will go to the main person with the credit card permission even if people have their own gift cards and apple ID?

  Read here about the sharing of the family:

  http://www.Apple.com/icloud/family-sharing/

• ITunes game works with the sharing of the family?

  My wife and I have separated Apple ID, but we have enabled sharing of family.  I was wondering if I activate iTunes game, applies to the two Apple ID through the sharing of the family?  Or could it be that I have to buy iTunes game for two Apple IDs?

  Hello

  Family sharing does not work with iTunes game.

  Jim

• A web page like facebook can be hidden from the family safe?

  a web page like facebook can be hidden from the family safe

  Moved from feedback

  Original title: family secure

  Hello!

  What do you mean by parental control can be hidden?
  Is it hidden in the activity reports? Or able to access Facebook, where it is blocked?
  If both Yes, which is not possible.
  Thank you!

• Can't see the apps in the sharing of the family

  Hi all:

  My daughter got her first iPhone yesterday! It's a 5 s, iOS running (for the moment) 8.3. In anticipation of this gift, a few months ago I put in place the family sharing with her. At the time where she could use it only on his MacBook, Yosemite, running, but it worked: she could access all my purchased music (dating from the opening of the iTunes Store), and we could see my apps, even if she had no reason to download.

  So yesterday we were squared away with AT & T, and she went into the application App Store on the phone. We go to updates > purchases and we can see my account, under his own... but when we choose it the app shows no apps in the list: that there are no applications available. It doesn't have the same issue when using the app Store in iTunes: all my purchases are there, as expected. It's just the apps.

  I though maybe this apps worked differently, only purchased apps after you set up the family sharing were available, but I don't think this is the case and in all cases family sharing was implemented a few months ago, and I got apps since then.

  Any ideas what might be happening?

  Thank you!

  Goodness, I had posted just that, and all of a sudden, there were all my apps! So who sets: just post something here, and that's all it takes!

  So, uh, whatever!

• Best way to set up multiple iPhones within the family?

  We have 3 iPhones in our family, and we always use the same Apple ID for all three devices.  I understand there was recently some changes to ios, and this strategy may not be the best way to have things to put in place now.  I started seeing a strange behavior between phones, with calls/texts appear on the phones of other people.  Doing some research, it seems that perhaps we should all have separate Apple ID and then go the family share the road, so I was hoping someone could explain clearly how can I do to set this up.

  Right now I have my ID Apple we use for purchases, and it seems that we use an old account @me.com for our iCloud account... which I suppose is what has allowed us to share calendars, see all our devices to find my iPhone, etc.  My ID Apple is not the same as the address of the iCloud account.

  I work in it and myself usually as a guy... pretty strong goal, I will admit that all these Apple and iCloud IDs confuse me... so any help is appreciated.  My main goals here are:

  • Be able to see the locations of all the people of my family
  • Have no other phone calls/texts/etc
  • To share and be aware of purchasing iTunes on all devices
  • I have set up, Music Match on my Apple ID (I think...), so I don't want to lose this functionality across all devices
  • Share a family calendar that we do today (and I hope not to lose what is currently implemented)

  Thanks in advance!

  Add to this... I just looked at the option icloud on my phone and it shows my address @me.com as a principal and an address of @icloud.com as a verified.  My apple account is my gmail address, and my wife and daughter use their gmail as their primary e-mail accounts.

  So I was wondering if I should put in place of the apple for each of them using ID addresses gmail... then we would all have an identifier associated with our gmail addresses apple.  If this is the case, how to set up the account icloud?  I can leave it like that, or should I set up with my gmail account, as my apple ID?

• deploy programmatically variable shared within the standalone version of RT (cRIO-9014)

  Hello

  I have a question about here to use variables shared single process within the standalone version of RT for the cRIO-9014

  I simplified my request of LV (LV2010) in two to test the use of shared variables.  See the attached file.

  (1) only run on the host PC: testHost
  (2) only works on the cRIO-9014: testRTcRIO

  for both, I packed stand-alone executable and source distribution.

  for testHost,.
  (a). I copied \builds\testcRIO\Host to d:/or-rt/xmlrpcFEU source Distribution...
  (b) I run... \builds\testcRIO\Host.exe
  (c) xmlrpcFEUlog - host.txt is generated.

  for testRTcRIO,.
  (a) .d FileZilla to connect to the target of RT on network, I copied... \builds\testcRIO\Source Distribution\c\ni - rt\xmlrpcFEU

  to/or-rt/xmlrpcFEU on the target of RT
  (b) I copied also... \builds\testcRIO\Real-Time Application\c\ni - rt\startup to/or-rt/startup on the target of RT
  (c) Max, I restarted the cRIO-9014.
  (d) xmlrpcFEUlog - RT.txt is generated.

  We see that the shared variable does not work inside the RT target. but worked well on PC. the deployment programmatically method does not work.  any suggestion?

  Another thing is:
  can I use telnet for the RT 9014 target and start the RT app directly? What is the command inside the terminal telnet RT?

  Currently, I can telnet into the cRIO-9014, but, what I can do with it?

  ================
  220-national Instruments FTP
  220 service Ready

  530 journal please with USER and PASS
  USER
  331 user name okay, need password
  PASS
  230 user logged
  Help
  211 - USER PASS ACCT STRU TYPE
  211-MODE CWD XCWD PWD XPWD
  211 CDUP XCUP PASV, RETR, REST
  211-PORT LIST NLST QUIT SYSTEM
  211 STAT HELP NOOP STOR, APPE
  211 STOU HELLO MKD XMKD RMD
  211 XRMD DELE, RNFR TRAVEL SIZE
  211 MDTM
  ===========================

  Concerning

  Xiaofeng

  
  

• How can a member of the family without an account standard security for the family... I have windows 7

  I use to have security for the family, but it has just stopped working.  I need for a family member who does not have a standard account.  I downloaded Essentials.

  Hi jaguar1234,

  The latest version of the parental control now uses the standard user accounts (logon Windows) as a child in the safety of the family. If you need to know about adding a user to the Windows login with standard privileges, please see this link.

  Once you have finished creating a standard user account and that you want to manage under parental control, then follow these steps:

  1. run the parental control on a Windows account with administrator privileges. If this is your first time running the parental control, you need to sign in using your Microsoft Account.

  2. after login, select the standard Windows account that you want to monitor as a child by checking the box to the right of the name of the account, and then click Next after.

  3 on the right, you will see members parental control with a list of drop down option. Click the menu drop-down, and then select Add standard account name.

  4. click on record. Wait until the installation is done.

  5. Once done, you should see the name of the account under Windows monitored accounts. To manage the account and setup of filters and restrictions, to connect on https://familysafety.microsoft.com, look for the child account name, and then click change settings.

  If you are having trouble configuring your parental control, do not hesitate to reply to this post.

  Thank you.

• File/folder sharing for the same group

  My desktop (Windows 7) and laptop (Windows Vista) are connected by a router. Both are belongs to the WORKING group. This is no problem for the printer share.

  I can see the icon from my desktop to my laptop but there is nothing (no file or folder) to the inside. Even if I change both to the homegroup, it's the same thing. I have to do some settings on files or folders to facilitate the sharing of files/folders?

  This is the case if the two computers (connected by a router) to join homegroup, they can share files of data or records no more automatically setting?

  Indeed, Yes, that is what should be a home group.

• Can I programmatically change the active group on a Hypertrend in DSC?

  I would like to know how to change the active group of a hypertrend program in Labview DSC.  I saw a link that says it can be done at Lookout.  But in the module DSC, the active group is read-only.

  I know a hard way to do it.  I could save the settings of hypertrend as xmlSettings in a temporary file.  The active group is one of the parameters.  I could then change the group active in this file text to point to the new group, and then reload the settings.  But this isn't a clean way of dong it.

  Anyone know if there is an easy way?

  I found a way to do it but not very clean.  I don't know why there is no function to change the current group.

  Here's how I did it.

  

• Why can I not see the Accessories group in Windows 7

  I can't see the Accessories group on my computer laptop girls. It runs Windows 7. I can see the Group on my laptop. Help appreciated

  See the following topics:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/accessories-option-is-missing-from-the-all/ec831a56-495e-4888-b70e-cae64470b553

• Photos app says "iCloud-storage is full" even after the upgrade

  I already had the plan of 50 GB on iCloud and I needed save lots of pictures and so left my Mac on all night with the Photos app open. In the morning, I received an email on my iCloud being full storage. I checked the Photos app and the same message showed here.

  I then upgraded to 200 GB plan and now have about 148 GB free. This improvement reflects on my iPhone and Mac:

  

  But this upgrade does not appear in the Photos app. I tried to restart the application, restart my Mac - nothing works. I can still see the old message in pictures preferences:

  

  Any ideas why this happens?

  Have you tried restarting your Mac