Icon audio SigmaTel (blue square) does not.

Similar Questions

• Windows 8 blue tooth does not connect devices

  Hi, Windows 8 blue tooth does not connect devices

  1 - Adding devices is interrupted and the phone always appears offline.
  2 and in the bluetooth icon (bottom right of the screen) the option 'allow a device to connect' is never on/available.

  I tried with multiple devices and they are all perfectly between them, has never worked with the computer! Who have already tried with the (uninstalled) disabled antivirus and it worked too!

  Hope you will reply soon

  Best regards

  JPCR

  Hi JPCR,

  It seems that Samsung has not yet released the compatible Bluetooth drivers for Windows 8. So, you can try to install the drivers in compatibility mode and check out. Here is the link where you can download the drivers for Windows 7.

  http://www.Samsung.com/us/support/owners/product/NP300E5A-A01UB

  Follow the steps to install in compatibility mode:

  a. right click on the driver installation file and select Properties and then tap or click on the compatibility tab.

  b. check the box run this program in compatibility modof e.

  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.

  Reference:

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Let us know the results.

• Samsung Blue Ray does not connect to internet, but being of other devices.

  I used this Blue Ray Samsung drive with this router for over a year without problems. A few days ago I set up parental controls, by downloading the Netgear Genie app on my PC from Windows desktop, on the router, and now Blue Ray does not connect to the internet. However it connects to the router fine. I have 2 phones Andoriod, 1 tablet of Andoriod, a WII Game Console and your Windows desktop that all connect to the router and the internet very well. I tried shut down the drive several times over 2 days and has been turned off at night twice. I deleted and re - establish the creation of a Wi - Fi connection on the player. I even updated the router. and off the Parental control. all this without any success. The DNS and IP are obtained automatically by the player. Any ideas?

  Hi bldroge,

  Here's how you reset the router.

  http://KB.NETGEAR.com/app/answers/detail/A_ID/9665/related/1

• iPhone 6 Apple Watch and BlueAnt q3 does not connect at the same time.

  IiPhone 6 + Apple Watch and BlueAnt q3 does not connect at the same time

  My Apple Watch and Blueant Q3 connect at the same time. You try to connect the Q3 and the watch to the iPhone, or you try to connect the Q3 of the watch?

• In Vista when I hover over the battery icon, it shows plugged in, does not support

  When I hover over the battery icon, it shows plugged in, does not support.  Why my battery not charging?

  Hi Retha_T,

  1. What is the brand and model of your laptop?

  2. when the problem started?

  3. did you of recent changes to the computer?

  You can read the following article and check if it helps to solve the problem:

  Solve battery problems

  Hope this information is useful.

• When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not.

  Black screen in Windows Media Center during the TV

  When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not. Any fix for it?

  TV works on the other program I have and has been workign on MC last week, but now I don't?

  Some success with this issue (its OK, but BLACK) video for live/recorded TV

  ' 1) ' disabled ' tuner card (Ati HD 650 PCIe) TV [via right click] in the Device Manager
  (2) restart Win7 64-bit
  (3) Win7 located & reinstalled the drivers
  (4) VOILA!   Real video and audio live & recorded TV

  BTW - before above fix in Device Manager:
  Notice anything in his video & Game Controllers
  'Properties' reported 'this device is functioning.
  "Update drivers" reported "... software driver...»
  ... and no updates of WMC anywhere in sight

  Go figure!

• I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  Also, I went to the link propertie

  I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  I also went on the link properties itself, but without success in starting.  How to launch the new version?

  Thank you, toinimj59.  I did this part and the installation is complete (there is apparently not earlier--included an acceptance of the general terms and conditions...)

  Solution 1: Disconnect from the desktop creative cloud app and reconnect

  1. Disconnect from and to, the app Office creative Cloud click here for instructions to return in
  2. Launch of Lightroom.

• Help! OUTPUT AUDIO BACK DECISION-MAKING DOES not!

  Hi, I have a problem with my AUDIO OUTPUT device. I use a M2N68 AM PLUS Asus MBord, all sounds drivers are updated and works OK. but my problem is that I don't hear anything from the speaker. Notification of speaker level icon is bouncing up and down and detect sound but not the speaker output. Another thing is that my DECISION-MAKING of OUTPUT AUDIO BACK not detect plugged or disconnected devices. My realtek on that HD Audio Manager of PANELS of OUTPUT REAR are blurred and only the FAÇADE are active that does not work as well. I hope someone can help. Thank you!

  Hello

  1. If it works well before?

  2 did you change on your computer before this problem?

  3. you receive an error message?

  You can try these steps and see if it works very well.

  Step 1

  I would like to you can check if the rear speakers are disabled and the volume level is fine.  To do this, follow the steps below.

  1. Click on start.
  2. Click on Control Panel and click on sound.
  3. Playback tab, click speakers and click Properties.
  4. Click the levels tab and check if the back entrance is set to mute and uncheck the box.
  5. Select the level to 100% and check if the speaker rear works fine.

  Also, you can try disabling the improvements and check if it helps.

  To turn off the improvements:

  1. access Control Panel

  2. click on its

  3. Select the play tab

  4. Select entry speakers/headphones

  5. click on Properties

  6. Select the tab improvements

  7. disable all improvements

  Step 2

  Try to perform a system restore and see if it works very well

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Step 3

  If the steps above don't you may need to contact the manufacturer of the computer to verify that the equipment works very well and has to be replaced or the motherboard

  It may be useful

  Concerning

• Satellite M100: Icon battery bar of tasks does not display time remaining

  Hello

  I have a Toshiba Satellite M100. It has windows XP Home, with no changes made (this is how it was preinstalled). I noticed that when I go over the battey icon only other percentages are displayed, not the rest of the time. I have a friend with a laptop L100 (which is quite similar to mine as material) which shows the remaining time in hours and minutes. You have any ideea, what should I do, I really want to know the time not a few percent.

  Thank you in advance.

  The same situation here! I noticed that the status of time does not appear on all models of laptops. I put t know why it is only a restriction of the power saver version.

  In my opinion, it is not so important, because I believe that the specified time is not realistic. This always depends on the use of the laptop.

  Good bye

• Satellite A200 - lack of icon DVD and DVD burner does not.

  Hello

  I have a problem with my laptop Satellite A200 series. DVD/RW icon disappeared from my folder on the computer. I looked into the system folder and it says:-

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I've been on the Microsoft Web site and who said to delete the driver and them click on check for changes on the hardware and it should find the new driver, but it still does not work...

  Any ideas?

  Hello

  Maybe this will help.

  [ME KLICK | http://aps2.toshiba-tro.de/kb0/TSB7801XL0000R01.htm]

• F1503 - led blue monitor does not power available. Unable to turn

  Hello

  I had my f1503 monitor into storage for a while and it finally worked its use. Properly connected all power and PC connections and changed the tension but no blue led light work and impossible to turn on the monitor. Checked the power adapter - green led on the power and 12,33 volts transformer showed at the end of the output of the power supply monitor.  The monitor plug was inserted into the grip. Help, please?

  That the monitor has a fuse that needs to be replaced?

  Hello Bruce123456,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems when your flat screen HP Pavilion f1503 monitor does not come. The problem you describe seems to be a physical problem, and I think it would be better if you contact HP Support for service options.

  I want to thank you for display on the HP Forums. Have a great day!

• I have Outlook Express e-mail Icon stick on opening and does not end is there too much mail, how can I fix it?

  When you click the icon to open my Outlook Express icon (envelope) sticks on the screen of the monitor and does not open. Is there a way to get into the program to remove at least half or the whole of all the e-mail. It was not opening now for several days if I'm afraid it's risk of stuck with e-mail. I have been looking for a job online and get a ton of e-mail. I can get through the control panel and I think I saw the problem, but I don't know how to remove it. Help!

  I welcome suggestions. Rosemary

  Folders.dbx is probably damaged.

  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  The path to the message will be very similar to this:

  C:\Documents and Settings\Your User of utilisateur\Local Settings\Application Data\Identities\ {long string of letters & numbers} \Microsoft\Outlook Express

  With OE closed, find the Folders.dbx file and delete it.  Another will be created automatically when you open OE.

  Note these possible side effects:

  When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. However, understand that you will lose the mail directory structure and message rules will probably have to be edited.

• Blu Ray does not work after upgrade to Windows 7 64-bit

  Hope someone can help with this problem. I found a lot of forum and users with similar problems but I can't solve this problem.

  I bought this HP Pavilion DV7-1055EA about 3 years ago the drive blu - ray one of the points of sale, it was loaded with Vista 32 bit. After making this computer has 4 GB of RAM instead of 3, I did a clean install of windows 7 64-bit. After which my Blu Ray player stopped working.

  When inserting a CD/DVD, the drive works fine and everything is as usual, however when insert a Blu Ray disc windows does not recognize the drive IE "drive is empty".

  Different things, I tried to set the inclusion of the problem, reflashing the BIOS, install the latest firmware, re - install the game media, installed PowerDVD but without any change in the symptoms.

  Can someone help with this problem? Well, I'm stuck on this one like blu ray readers are not my strong point in computers. Maybe HP (in their wisdom) printed a digital brand on the device which prevents him from being compatible with more recent versions of windows? I talked to HP however my warranty has expired I do not pay £15 for a fool to tell me to come back for win vista (which is the worst OS known to man kind) or that there is no solution available. Help, please?

  Hello

  After writing this last post, so I decided to download Nero Info Tool to look at information from drive etc.

  The program asked if I could put in a disc to test the speed of running, so I thought... what the hell I'll put in a blu - ray disc and see what happens.

  Next thing I know that running speed test took place then everything suddenly the blu ray kicks in life and he was here... smooth as the more calm waters, known for the kind of man... my blu ray film.

  Reboot the machine and now the blu - ray player works fine. Any idea on what just happened?

• No audio audio on computer. Fix Center indicates the problem, my audio doesn't work does not sound and manufacturer-both required

  I have an acer CPU. I might delete something that caused audio does not run correctly, but not sound. Speakers are plugged.

  Install the audio for the brand device drivers and the computer audio device model you have.

  (Without device drivers, the operating system has no idea how to talk to the audio device * and * vice versa.)  We can speak English, the other Swahili.  If no member of the House can translate, then you get just a lot of weird looks.)

• Model presents itself as a blue square and not a notebook with a large e on my desk

  Hello there, hope you can help me.

  My models appear as a blue square with a white square inside rather than appear as a blank page with a big e when I see it on my desktop

  Inside my HTML editor my model displays correctly with the white page with the big E

  Just had my pc upgraded and reformatted.

  I need to know if there is a setting somewhere that will fix this problem

  Hello

  1. what the extension to these files?
  2 have you installed the necessary software to open these files?
  3. what happens when you try to open these files?

  This behavior occurs generally when you don't have installated in the application required to open the files.  In addition, this may happen by corrupt icon cache. To solve the problem, please rebuild the icon cache.
  a. click the Start button, and then click computer.
  b. in the toolbar, click on organize, then choose folder and Search Options.
  c. click on the view tab, check to select the hidden files and folders option, and click OK.
  d. then, enter the following directory:
   
  %USERPROFILE%\AppData\Local
   
  e. find the IconCache.db file and rename it to IconCache.db.old.
  f. close the window and restart the computer.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.