Similar Questions

• Satellite L300D has decided to go a sort of boot loop

  My laptop decided to go sort of boot loop where it load and displays Toshiba screen, you can press F2 (for BIOS) or F12 (for the boot sequence) then shows a screen saying "Windows is loading files...". "with a progress bar and once who reached 100%, it restarts. Its kind of like the operating system does not recognize the HD. You can not press F8 to boot into safe mode or anything.

  Its a L300D Satellite from Toshiba with Vista

  I replaced the hard drive about a year on the computer and reinstalled vista OS with recovery disks and its been working very well. Ive tried reinstalling several times, ive also tried another hard drive and the same results with it also. I took the disc out and put it in a cage of external hard drive and can see everything ok. So I don't think it's a problem with the disk that initially, I thought it was.

  Ive also tried to format the drive (via the external hard drive cage) and resettlement, repair of vista, which dates back to the last know good configuration etc, but I just get the same results. I also downloaded and tried all the options with recovery of neosmart disk. And I can browse the hard drive at the command prompt ok, which lead me to think of the boot partition has been corrupted somehow. I thought the full format would be cured it but no luck. It comes down to the boot loop.

  So I'm running out of things to try.
  Any suggestions would be appreciated.

  Hey Buddy,

  Which disk you used exactly?
  Have you tested the Toshiba Recovery disk?

  If Yes, and the same problem exist, it appears to be a malfunction of the equipment. So, I would contact an authorized assistance service provider.

• Iconia W3-810 cannot boot from the recovery disc

  Hi, I have a 32 GB Iconia W3-810.  The original recovery disk was lost.

  I made a Bootable DVD of 8.1 and also Win 8.1 bootable USB key.  These two have been tested on another laptop, and both can start this laptop to the installation environment.

  I also followed the guide to enter the BIOS of the Acer Tablet settings and change the boot order and change remove secure boot option.

  Unfortunately the unit keeps trying to start in Windows 8.1 - one who is full of viruses and should be flattened and start over.

  Help, please...

  Many of these cables power the Tablet via the splitter, but do not provide power at the side of the data cable from the side power (I don't think I explained that well). They are designed to power your device on the motor side while allowing access to data on the other side. If connected:

  Tablet- + - power
  
              |
  
              |
  
             DVD

  The Tablet receives power supply and Tablet provides the voltage and sends and receives data from DVD, but power does not give voltage on DVD. This means that the DVD does not necessarily receive the budget power that he needs.

  If you can, try the DVD connected to a powered hub. Turn upwards and actually to work are two different things, and tablets offer far less than the maximum power on their USB ports.

• Boot Loop iPhone 5 c problem

  So that's how iphone got a uppdate iTunes, but after she got into a boot loop.

  The phone can be switched on using the on/off switch, but it can be disabled by using only the power on + combo home buton!

  Powers on but right phone at the apple logo, it stay there for 3 seconds then the apple logo fades to grey (like an LCD) broken then there restarts... and that on and so on... until the battery is empty.

  The phone goes into DFU mode, itunes acknowledged, but after itunes launch the iphone in dfu mode, itunes says "waiting for iphone", the phone restarts, but instead to continue the restore procedure, it penetrates into the same loop and after 10 minutes, itunes gives error.

  The phone is out of warranty, and I want to record just because it seems perfect, no sign of use!

  Oh and another thing, I tried to put another apple original battery (I hade a new brand in hand 6!) did not work...

  So guys I came to you for your review. Be free to say what you think that will fix this poor iphone!

  I was about to say to make an appointment at the genius bar. They would try to restore it for you free of charge...

  Then I saw your mention of trying to put a new battery in there... If you have physically opened the phone upwards, it is technically unbearable and completely untouchable by Apple. I couldn't hurt to consider anyway and see if they can get it to restore, but you can kiss all hopes for a farewell to replace security exit.

• iMac 27 stuck boot loop

  my 27-in. Imac is stuck in a boot loop.  It goes to the start screen, I see the Apple logo and progress bar, then the screen has a line go overboard and it restarts. Attached picture to show you the screen, any help would be great. Thank you!

  Try to start in safe mode, try safe mode if your Mac does not commissioning - Apple Support

• Carillon of boot loop - start 2011 MBP will not start.

  I have a start 2011 15 "MBPro8, 2

  Quad Core Intel Core i7

  2.30 GHz

  Boot ROM version: MBP81.88Z.0047.B2A.1506082204

  Intel HD Graphics 3000 VRAM:512 MB

  AMD Radeon HD 6750M VRAM:1 GB

  8 GB of RAM 1333 MHz DIMM0

  It will not start.  Trying to start the machine, it enters a loop-

  1. startup chime

  2. grey screen with Apple

  3. the small wheel starts to turn under the Apple

  4. the screen goes black

  ... and the cycle starts over.

  The computer does not start in Mode safe.  In an attempt to safe mode the loop above has the addition:

  3. a progress bar is displayed but does not progress.

  I have reset the PRAM

  It will start up in target Mode, so I was able to recover data

  In target Mode, I was able to run first aid utility on the drive.  This has not fixed the problem.

  I can hold down the Option key and see Macintosh HD and the recovery Partition.  If I try to boot from the recovery partition, I get the same loop.

  I can start in the Test of online material, which revealed no material problems

  I can boot in Verbose mode and it always happens in the same place

  Execution fsck_hfs (version 226.1.1 of hfs)

  BootCacheControl: cannot open /var/db/BootCache.playlist: 2 no such file or directory

  ' ' It would be possible for me to insert the "var/db/BootCache.playlist" file using target disk mode?

  Other thoughts?

  Check Google for this error, it seems to be common.

  Apparently the startup configuration file is corrupted. These 2 articles can be useful:

  http://www.Hackintosh.computer/?p=67

  https://www.iFixit.com/answers/view/192201/unable+to+open+-var-db-BootCache.play list % 3A + 2

• iPhone 5 stuck in boot loop

  Hey everybody, I recently encountered a problem where I replaced one of my friend 5 iPhone battery and when I plugged it in to charge that he was stuck in a boot loop cycle. The Apple logo appear and disappear over and over again and never start.  I then read a lot of forums where people have had the same problem and tried a lot of things.  I even tried to put several other types of accumulators in the farm of origin, including, and none of them would allow the phone to initialize.

  I solved this problem by putting the iPhone in recovery mode where then iTunes could recognize.  I then did the update (not recovery) that was available, because do not get rid of all the data on the phone.

  I got a weird error that doesn't seem the case on internet "iTunes unable to connect to the iPhone. The value is missing.

  

  But the update worked!  Then I later discovered that my friend tried to update his phone when he died (battery was flakey, so why I replaced it).

  So if someone has ever an update failed and an iPhone stuck in a boot loop, just put in recovery mode and update the firmware from iTunes.

• Satellite L50 - A - 1 6: "boot loop" at power on

  Hello world.

  I have a Satellite L50 - A - 1 6 (just bought). I changed the HARD drive partitions in order to better utilize the space. Then I tried to create the recovery from the preinstalled recovery partition disk (However this was not changed!), but it did not work. It was posted this message: "the recovery partition was not found.

  So I tried to restore factory settings (as explained in the guide, press '0' at the beginning upward).
  After that, my laptop computer goes into "boot loop", and it continues to go in the boot loop every time I turn it on. The boot loop here is summerized: + logo (leading to innovation) toshiba-> error message (.. .has been detected a problem... etc etc)-> black screen-> logo toshiba (leading to innovation)-> ecc. ECC. +

  The only possible operations are:
  -to power the laptop off (by turn off by pressing the key)
  -to access Bios (by pressing the F2 key)
  but later, the laptop comes back still in boot loop.

  I also tried to set up an order of boot device for the use of tools like "live recovery cd" or similar (also USB)... but nothing... He always goes in the city "boot loop".

  Any suggestion to have the correct start of my laptop?

  Thanks in advance.

  Hello

  >. I changed the HARD drive partitions in order to better utilize the space. Then I tried to create the recovery from the preinstalled recovery partition disk (However this was not changed!), but it did not work. It was posted this message: "the recovery partition was not found.

  This does not surprise me. You have changed the partition table, and therefore the partitions of HARD drive will be more found.

  > So I tried to restore factory settings (as explained in the guide, press '0' at the beginning upward). After that, my laptop computer goes into "boot loop", and it continues to go in the boot loop every time I turn it on. The boot loop is summerized here: logo (leading to innovation) toshiba-> error message (.. .has been detected a problem... etc etc)-> black screen-> logo toshiba (leading to innovation)-> ecc. ECC.

  This does not work for the reason that I mentioned above. The disk HARD recovery isn't possible now!

  I recommend you to use stop force switch:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

• Iomega IX4 - 200 d - Boot Loop

  Hello.

  Hello.

  We currently have an Iomega IX4 - 200 d that is stuck on a loop of Boot Logo Iomega.

  I have posted a youtube video showing the issue in order to provide a better explanation.

  https://www.YouTube.com/watch?v=aGLS5HfHPLM

  The unit worked perfectly well and all the sudden we noticed that we had any access to the content.

  At the time that I arrived at the unit, it's this way.

  Content have already been recovered using a machine linux, and now the 4 HARD drives have been tested and are 100% functional.

  We tried a few methods found on internet, HARD drive partitions were removed and all, but we just can't get the device to work.

  Any help is welcome.

  Best regards
  Paulo brine.

  OK, I managed to fix my Iomega IX4 - 200 d, not supported by Lenovo, but in any case, for those who seek to challenge their units, you can find all the necessary files and instructions here:

  https://www.dropbox.com/sh/f3eq457tgw6nfnd/AADNpvcxRYwKqoOC0mTlC978a?DL=0

  Best regards

  Paulo brine.

• IX2 - DL does not start after the firmware update and now in boot loop contant with double red lights

  I just applied the update to the latest firmware 4.1.208.33789 for my IX2 - DL and it took an extremely long time to reboot - flashing white light for 20 min on the right.

  Shooting and by unplugging power did the same result.

  I hold the reset button hardware pin and now he's in a boot loop throw up double red lights and then attempt to restart with flashing blue white and strong.

  Help! don't know what to do next.

  Hello steveappcity,

  I recommend a support incident, opening the only way I can support an imager is if she is officially released:
  https://Lenovo-na-en.custhelp.com/app/ask/

• Re: Satellite L650/07C-boot-loop after memory upgrade

  I have a Toshiba Satellite L650 / 07C - PSK1JA-07C017.
  To get a little more life out of it, I've updated yesterday with a SSD and 8 GB memory.

  The SSDS works perfectly and I have installed OS and all the drivers and software.
  However, the memory causes a boot loops. I returned to the standard 2 x 2 GB memory at the moment.

  With the new memory installed, the computer startup-loops. When you try to start Windows, the computer will appear at the stage of loading Windows (the boot animation) and then restarts.
  I tried to start with the recovery discs, and it arrives at the stage of loading of Windows Setup, and then restarts.
  She will continue trying to start, then by restarting (then repeat), until I turn it off.

  The memory I installed is Corsair CMSO8GX3M2A1333C9 (2 x 4 GB):
  http://www.Corsair.com/cmso8gx3m2a1333c9.html

  For me, it looks like the same specifications that the modules of memory Kingston 4 GB listed on the Toshiba site as being compatible with my laptop:
  http://www.MyToshiba.com.au/products/Accessories/memory/KTT-S3B/4G/accessories

  I found the specs of memory recommended here:
  http://www.LASystems.be/PDF/Kingston/246787/KTT-S3B4G.PDF

  If I go into the BIOS, I see that the memory is detected as 8192KB. The Toshiba site says that this laptop is expandable to 8 GB.

  Is there something I'm missing?
  Is there another step I need to perform when upgrading their memory?
  I don't know why it won't boot with the new memory modules in that I put.

  Thanks for any help you can offer.

  I assume you have the Australian model is not easy to find info on the hardware upgrade. What I can say is that model European uses DDR3 1066 MHz memory modules and 4 GB of RAM compatible a part PA3677U-1M4G number.

  It must be exact model described by microcens.
  I recommend you use the tested and compatible memory modules.

• PowerMac G5 leopard in a boot loop

  Help! My G5 is stuck in a loop of start due a sorta app problem

  My PowerMac G5 is stuck in a boot loop because first my mac worked great until I launch TextEdit and he and all the other apps I opened after that always sit bouncing saying does not and I can't leave them so I tried Logout and it expired, saying he cannot leave TextEdit so my common sense knew Shutdown doesn't work so I forced shutdown and now It just WONT BOOT! Help, please!

  Garret

  Hi Garret,

  Could be many things, we should start with this...

  «Try disk utility»

  1 insert the Mac OS X installation disc, and then restart the computer by pressing the C.

  2 when your computer has finished booting from the disc, choose disk utility from the menu of the installer at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)

  * Important: Do not click on continue in the first screen of the installer. If you do, you must restart from the disc to access disc utilitaire.*

  3. click the first aid tab.

  4. Select your Mac OS X volume.

  5. click on the ERD, (not repair permissions). Disk utility verifies and repairs the disk. »

  http://docs.info.Apple.com/article.html?artnum=106214

  Then try a safe boot, (now shift key at startup), run disk utility in Applications > utilities, then highlight your reader, click on repair permissions, restart when done.

  (Secure boot can remain on the gray radian for a long time, let go, he tries to repair the hard drive & clear the caches)

  If by chance you do not have your installation Disc, try at least to the part starting secure from.

• T620 WES8 Image Capture failure/Boot Loop

  -t620 Quad Core

  -WES8 x 64

  -13WWDTBM602 #SABA #DABA

  -BIOS: L40 v2.05

  ------------------

  Tried an initial capture before making changes.  First capture failed quickly with a network card driver error - I've updated HPDM 4.6 SP1 and was able to continue beyond this error.

  Any following capture attempts result in a loop to initialize uneding.  The workstation creates a new boot option, "winpe [EMS ENABLED]", which he defines as a default value, which continually, it loads and restarts.  I have run this process for more than an hour before canceling the task.  All subsequent attempts create a new boot option or additional "winpe" with the same behavior.  I've updated the BIOS at this stage no change.

  I also found that I am unable to the hell UWF until the administrator is to go to the taskbar or the HP unified write filtering via the control panel Configuration.  The lock is green and indicates the GUI of Configuration UWF UWF is activated but the new shortcuts office and downloads are left in place after the reboot.  Event viewer shows "event ID 1007:"unified write filter is not disabled, code 196608 output. "  The system does not have the specified path.  "I also tried to disable UWF using HPDM but received 14007032, write error filter.

  Write research through the Configuration of the filter, I found that there is NO file/folder exclusion, considering that the TC I just shot of the multiple box including bootstat.dat and agent_persist.dat.

  So... do I have a lemon here or what?  I have an another t620 that I confirmed I can disable UWF without any problems but I have not tried image but as I am a little worried about the boot loop and create the same problems that I saw with the original.  I'd be more comfortable if I could find a factory image HP download, but there is none available on the drivers & software page.  Can somene HP direct me to a factory WES8 x 64 image?

  Thank you

  ZP.

  We have completely uninstalled HDPM and reinstalled 4.6 with a new database and imagery with success the t610 older.  Then we have updated to 4.6 SP1 and we were able to successfully image the t620.

• Windows 7 HP boot loop

  I am running Windows 7 on a HP laptop and recently, I encountered a big problem. I clicked on the option "restart now" my updates after installation, let my computer it is the thing and went to bed. When I woke up I found it on the screen that says "cannot start Windows. So I ran the restore and he turned back, and then the update message come ask new restart now. I did it again, assuming error just randomly and my computer got stuck in a boot loop failed. I reformatted my hard drive and reinstalled Windows 7 and I thought everything was good, but now I find that things have returned to the way they are and now I'm back in the loop of bad starts. The signing of the problem is the following:
  Problem event name: StarupRepairOffline
  Signature of the problem 01: 6.1.7600.16385
  Signature of the problem 02: 6.1.7600.16385
  Signature of the problem 03: unknown
  Signature of the 04:21200948 problem
  Signature of the problem 05: AutoFailover
  Signature of problem 06:2

  Signature of the problem 07: BadPatch
  OS version: 6.1.7600.2.0.0.2561
  Locale ID: 1033

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MS - MVP - Elephant Boy computers - don't panic!

• Windows 10 for Iconia W1-810

  Hello everyone,

  I was wondering how can I get the update of Windows 10 for my Iconia W1-810.

  I got the update for my desktop pc via the icon in the taskbar, but who never appeared on the tablet.

  After checking, I all day, even the last 1.06 bios, so I don't know what the problem is.

  According to the list of stretchy tablets from Acer, mine is on the list. No matter what stage, what should I do?

  Thanks in advance for any response,

  See you soon

  I've updated mine: just download the media on Microsoft Official website (http://windows.microsoft.com/it-it/windows-10/media-creation-tool-install ) tool, run it, and then choose "upgrade this PC now."