Lenovo T410s and Mini Dock Plus Series 3 with 2 monitors DVI, white screen during the boot process

Similar Questions

• T420s + Mini Dock Plus Series 3 with USB 3.0 90W - USB 3.0 works as USB 2.0

  Greetings!

  I'm probably not the first person who cares, but I did not find the same topic in the forum.

  I have T420s Lenovo ThinkPad Mini Dock Plus Series 3 with USB 3.0 plugged 90W. The problem, I USB 3.0 port on the dock (blue) work in USB 2.0. The port of the laptop works very well. I check it by plugging Seagate drive HARD mobile - when the HARD drive is plugged into the port blue station dock Windows (7, 64-bit) complains "device can run faster", using the port laptop does not trigger the message.

  USB 3.0 is installed.

  BIOS version is 1.37.

  Drivers Intel Chipset are updated.

  Device Manager displays the connection as a chain of two "Generic USB Hub, if the HARD drive is connected to the laptop port its chain of" Renesas Electronics USB 3.0 blah - blah ".»

  Help, please! If this combination is not supported, please point to the corresponding link.

  Thank you!

  USB 3.0 port on the dock is not supported on the T420s, it is supported only on T430s and later versions.

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=ACCS-Guide

  It allows to find the document listed in the link.

  I have the T420s and T430s with this docking station.

• Audio input/output ports Thinkpad Mini Dock Plus Series 3 with inactive W520

  I have 3 laptops W520 and 3 Thinkpad Mini Dock Plus Series 3 docks. The audio 1/8 "output audio and MIC ports are not detected by Windows. In the sound settings, the high definition Audio Device is always disconnected. I read that there was a problem with background sound via ports audio on an earlier execution of these docks, but the production on these date are all 11/07 (after Lenovo solved the problem). Someone had a similar problem? The ports are inactive for the W520 by design?

  Solution:... drivers. Should have checked that first. I thought that our support office would have done that. I thought wrong.

• Triple monitors with Thinkpad Mini Dock Plus Series 3 T520

  Hello

  I have Lenovo T520 with home Mini Dock Plus Series 3 station.

  I would like to connect three monitors, that is, two dviports and thirdly, one is the T520 monitor.

  I updated my video driver for Interl (R) Graphics 3000 Driver.

  When I try to run the NVIDIA Graphicdriver, I got a message error "the graphics driver is not compatible with the graphics hardware. I tried to find a solution on Lenovo forum

  http://forums.Lenovo.com/T5/options-Accessories/mini-dock-plus-series-3-with-triple-monitors/TD-p/57...

  It says that I need to enable Optimus in the system.

  I can't understand what he found where I can activate Optimus?

  You guys have any suggestions as to how I can put it up using two DVI ports instead of use the vga?

  Kind regards

  Thank you all guys.

  While constantly looking for a solution to extend the number of monitor. I managed to find a solution. Today, I had "I - TEC USB 2.0 graphics video card" and he connected with one of the USB port. It works very well and I am also pleased with the video quality. I can separately used the third monitor. It is also possible to share the display between the second and the third screen.

  Concerning

• X 220 + mini Dock Plus Series 3 no = no eSATA

  Hello!

  Today, I tried to use the eSATA connection on my Mini Dock Plus Series 3 with my X 220 (4290-W1B). According to the users manual, it should work and that there should be an option to toggle the eSATA connection in BIOS-> Security-> access to the Port of IO. But isn't! The dock would be defective?

  Of course, it is, as stated in the manual user and by many users themselves.

  in any case: Solution:

  1. step: Activate HDD/Ultrabay option in BIOS

  2 step: Use a disk external DRIVE with separate power supply, as the eSATA on the dock connection is _not_ powered!

• ThinkPad Mini Dock Plus Series 3 vs. ThinkPad Mini Dock Series 3

  What is the difference between the "ThinkPad Mini Dock Series 3" and the "ThinkPad Mini Dock more Series 3"?

  Also, why are they not those available to the Canada, but when they already sell the 400s in the Canada?

  Thank you.

  Hi sgarrity and welcome to the Lenovo user community!

  A DVI port, a DisplayPort and an eSATA port:

  Overview of ThinkPad Mini Dock Series 3

  ThinkPad Mini Dock Plus Series 3 view all

  Have you tried the Lenovo Canada call on availability? Online shops often don't understand not everything that is available.

• W530 and Mini Docking Station - monitor not displaying at boot time

  I have a W530 (2441A 53) and I just the mini docking station for it (433835U). We are using PGP Desktop, then when I start my laptop, it prompts me for a PGP password. The monitor does not display it for me at all. I have to go to the laptop, open it and enter the password (well, actually, I think I can probably get on the keyboard that I use with the monitor, but I don't see what is happening, and the docking station is in an uncomfortable situation). Once I get the password, and the machine gets more in the boot process, and then the screen finally shows what happens, and it's very well after this point (well, not exactly - it is not about taking advantage of the resolution of my screen - but I am not concerned about it right now).

  Is there a setting I should do in the BIOS, Control Panel, etc., so that the monitor can function during startup?

  In the BIOS, set the graphic display to the detection of Optimus discreet and set to 'disabled '.

• I have InDesign CS5.5 for 2 systems - my laptop crashed and I now have a new with Windows 8.1.  I downloaded the correct version of InDesign, but when I enter my l series #, the message reades # is valid, but the software cannot be raised

  I have InDesign CS5.5 for 2 systems - my laptop crashed and I now have a new with Windows 8.1.  I downloaded the correct version of InDesign, but when I enter my l series #, the message reades # is valid, but the software cannot be found on the system.  It seems that the program PageMaker 7 which is not on the new computer.  How can I load my InDesign CS5.5 on the new computer laptop?

  If you purchased InDesign CS5.5 as an upgrade then it looks like it's showing that you need to provide information about the old version where you improved since he found nothing that qualifies.  You must only choose the old version and serial number.  (I don't know anything about InDesign, nor how it might relate to PageMaker).

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  Have you checked the settings > General > accessibility > greyscale > power off.

  If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

• Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

  Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

  Open a book, tap, tap of he two, disable auto-nuit theme.

  

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more

  My daughter's office got fried during the last storm, even though she had a surge protector.  Obviously the power company line was bad.  The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more.  When she tries to run a system restore it gets "extended attributes are incompatible."..: thank you for your help.  Debbie

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the scan tool (SFC) System File Checker and check if it helps.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.Microsoft.com/kb/929833

  Method 2:

  Try to clean boot, and then check to see if this helps you.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 3:

  Try the steps in the following Microsoft article and check if it helps.

  Problems installing and uninstalling programs on Windows computers:

  http://support.Microsoft.com/kb/2438651

  Hope the helps of information. Please post back and we do know.

• New X 220 supported two external monitors with the mini dock plus?

  Hello

  I need to buy a new laptop of Lenovo in emergency.

  But we must ensure that it supports dual display on two external monitors. (VGA)

  My question is:

  (1) we plan to buy with the mini dock more, she has two HDMI port.

  can it support two external monitors for Intel HD Graphics 3000?

  (we will close the covers when to use two external monitors)

  (2) can I use DVI to convert converter VGA to VGA to support two external monitors

  (3) what is the difference in weight to 220 X SATA HDD and SSD HDD?

  Please help to emergency!

  Rgds,
  Sun

  Hello

  Yes, it works.

  He must need a converter VGA (F) display port.

  Thank you.

  See you soon
  Sun

• Tecra A11 - 113 - white screen and the cursor of the mouse during the boot

  Hello

  My Toshiba Tecra A11-113 with win 7 32 bit boots with a mouse cursor and the visible white screen.
  I tried to start under different boot options. Mode, safemode, last repair job configuration
  and msdos command only... all these startup options give the same result.

  I also tried with win 7 32 bit dvd, but same result.

  I am able to access the C drive by booting with a linux key, so the data is visible.

  Can someone please give me a solution?

  Thank you

  What happens if you access the BIOS? Is menu visible on-screen BIOS?
  Turn on the unit F2 button and press.
  This should allow you to access the BIOS.

  If you will be able to access the BIOS and see everything as usual, then the screen is OK and I think there is a problem with your installation of Windows System.
  So boot from the Toshiba Recovery disk should help you solve this problem.

  You said that you already tried to boot from the Windows DVD disc is this Toshiba Recovery disk? In my opinion, you use this disk to restore the laptop to factory settings.