ICPPX 4.05 and/or call Mgr 4.13 multiple LDAP servers for redundancy
We run IPCCX 4.05 to high availability (active / standby) and Call Manager 4.13 Pub/Sub. In this configuration, we use LDAP for authentication AD instead of the directory of DC (not my choice... things you inherit in life).
The call of Bishop and/or the servers IPCCX can be setup to point to multiple LDAP servers for redundancy?
CAN CM 4.13 and/or IPCCX 4.05 LDAPS support (as I have said, things you inherit)?
Our sysadmin team won our main server to the DC, and with him all functins LDAP search broke. Needless to say they will be put in place of LDAP or LDAPS on our main and backup DC in the near future.
Any information/suggestions/recommendatinos are appreciated.
Thank you
-Scott
Hello
This IS possible.
If the CRS web interface admin (/ appadmin) is available:
1. open a session
2. go to the system > LDAP information
3 type the FQDN / IP addresses (I recommend the latter) for LDAP servers, separated by commas (for example, I have something like in our laboratory: "ldapserver.domain.as, 10.1.1.1" - works like charm)
4. a window will appear asking if the LDAP information must be created or you just want to add another LDAP server (~ configuration already there). Choose wisely :-)
5. restart the server. No, restart the CRS engine is not enough.
If the CRS web administration interface is not available (~ as you said Mr. Sysadmin won DC backend), the there is a chance to get rid of this guy ;-) Anyway, there is always a chance that you can make it work. Of course, the LDAP server must already contain the appropriate configuration.
1. connect to the CRS Server using rdesktop/VNC
2. look for this file: C:\Program Files\wfavvid\properties\directory.properties it's just a plain text file. Look for this CCNIniFile=c:\\winnt\\system32\\ccn\\ccndir.ini
In fact, it can be something else too, this is the default path.
3. this file contains the information that we are looking for: LDAPURL 'ldap://10.1.1.1:389, ldap://10.1.1.2:389' and other important things like passwords and base DN
Change it according to your needs. :-)
4. restart the server.
Good luck.
G.
Tags: Cisco Support
Similar Questions
-
Can't do out calls and incoming calls go straight to voicemail
Cannot do out calls and incoming calls are directed to voicemail
See If you can not connect to a cellular or cell - data Apple Support Network.
TT2
-
I have FaceTime disabled through restrictions on my daughter's phone. However, she is still able to make and receive calls FaceTime. If it is limited, how this phenomenon is happening and is there a way to prevent it from happening in the future?
How do you know that she can always use Facetime?
Could she learned/guessed the password restriction?
-
After installing OS 7 (from 6 OS) on a machine Intel, Photoshop CS and CS2 will not open. I get the message that the Power PC programs are more supported. Why is this happening? Thank you.
The message is clear (if you know what Power PC means, in other words). All G5 and many ancient used Mac made by Motorola and IBM called PowerPC processors. More recent that all Mac G5s use Intel processors.
You talk to any OS, Mac, Windows, Linux, etc, the application that you are using must be written and compiled for the CPU and operating system, or it won't work.
Your copy of Photoshop were written for older Mac using PowerPC applications and does not not on any Mac running Lion 10.7.x or later version. They ran under Snow Leopard 10.6.x because it was the last version of Mac OS X to include Rosetta, which is an emulator PowerPC that allowed these older apps to function, even though the Mac has an Intel processor.
Your have several options.
(1) buy a new version of Photoshop that runs natively under Leo.
2) back to Snow Leopard.
(3) purchase Server Snow Leopard from Apple ($20) and that run in a virtual machine as the free VirtualBox, VMware or Parallels. You can then run your PPC software in the virtual machine. It means that you were running an OS within an operating system and need a good amount of RAM installed to support the two well enough for your Mac is not slow to a crawl.
-
A pop-up message indicating my iPad may have been infected by the virus of Zeus and to call a 1 877 No. TV. give Code _ for help in the removal of malware. Has been warned to restart no device. What is a legitimate threat or a scam?
And such a warning will be a scam.
Phony 'technical support' / 'ransomware' popups and web pages
-
Portege M400: Is it possible to receive and make calls with the SIM card
Is it possible to receive and make calls with the card SIM module in the Portege M400?
I know that you can send and receive sms messeges, which, according to me, the software is not all good because you can't hold much, and you can't send to ems or mms.
But there may be other software here?
Hello
What software do you mean exactly?
As far as I know that the MobiLink was preinstalled on some units Portege M400.
This software supports these features:
Send and receive SMS, composition and read TEXT messages in several languages, compose and send to multiple recipients, the mobile contacts address book support, Rich edit for the launch of URL and Email using embedded addresses.As you can see that you can not use this software to make calls!
And unfortunately other software does not know me :(With regard to the MobiLink Communications Software Suite;
The details can be verified here:
http://www.novatelwireless.com/products/solutions/MobiLink.htmlGreetings
-
Sometimes I don't get and the vibrations or sounds for the text and incoming calls
Hello
I have phone 6
Sometimes I'm not vibrations and sounds for the text and incoming calls
I went to all the sound settings
Thank you
Is there a moon icon in the top right?
-
My 5s with 9.2.1 update sometimes drop the incoming call, participating in the function of the icon and the call are lost due to inoperative service. Does anyone know how to fix this?
Try a forced reboot of the phone. You won't lose any data when you do this.
To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.
-
I have a problem in my iPhone 5 s while I call someone when on-call time at 1 hour of the call is disconnected and say call failed can help you me in this problem.
What iOS version you are running. I've heard of it, but I heard no talk for a long time... You can update to iOS.
-
False ASCII control characters values in Variables and the call stack in CVI2013?
Hello
I think that there is an error in the window "Variables and stack calls" If you want to find your variables in ASCII format.
(0-31) control characters are not displayed correctly. They are offset by 2.
For example:
Character in decimal format is 10 (LF), but when you're chancing to ASCII it is projection \012.
The same with 13 (CR). This character is \015 as ASCII.
I think that it was no problem in CVI2012.
Best regards
Gunther
I do not use CVI2013 Yes so I can't answer about this specific product, but the code you are showing are the octal equivalent of the specified decimal value: it is possible that control characters (or generally the natually those non-printable) is replaced by their octal equivalent to the chain.
-
Problem with the window "Variables and stack calls ': Options / interpret as
Hello NO,.
I found a way to run the JIT-debugger LabWindows/CVI on ICB itself...
This is the procedure:
- I put a breakpoint, run the code, and the breakpoint, I opened the window "Variables and stack calls" by right clicking on a variable and selecting 'Display Variable View.
- Any variable shown, I right click and choose Options / interpret as
You're right, I could now reproduce as well. It seems as if the presence of a function pointer, if set or not, causes interpret as shatter the debugger. The ADE does not seem to be affected, but you will probably have to restart your debugging session when this happens.
I created the bug report 425151.
I really appreciate the time spent in this narrowing for me. Thank you!
Luis
-
the names of players on scrabble in facebook recently failed and now called "anonymous".
the names of players on scrabble in facebook recently failed and now called "anonymous".
Hello
This question would be better suited in the face book forum. You can pour into your queries to
www.forums.Developers.Facebook.comKind regards
Clement Kumar.Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.
-
The so-called PC Ultra Speed guard offering itwself for me. It is a product of Windows Explorer and if so, is it free?
Joan,
Please go through the following:
http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
http://www.Microsoft.com/security/PC-security/spyware-WhatIs.aspx
-
phone calls in vista?
In Windows 3.1, I had the ability to send and receive calls by using a modem, it is possible to do it on Vista? If yes how?
The game, February 16, 2012 21:46:49 + 0000, metalfare wrote:
In Windows 3.1, I had the ability to send and receive calls by using a modem, it is possible to do it on Vista? If yes how?
This isn't a problem of version of Windows. Must see with what software
you are running. Yes, if you use a program that has this feature, you
can do.
Ken Blake, Microsoft MVP -
Unable to wait 30 seconds and then call the TCL Script as Action?
Hello and good afternoon all!
I was browsing through different threads and did some research and I am unable to get my applet to wait 30 seconds and then call a script TCL to a succession of 'action '. Here is the Basic script I am trying to run:
Event Manager applet track-loopback1
Event track 10 down state
command action 1.0 cli 'enable '.
Action 1.1, «config t» cli command
Action 1.3 cli command "event manager applet-counting backwards.
action 1.4 cli command 'event timer countdown 30 '.
action 1.5 cli command "action 1.0 wait 30.
Action 1.6 cli command "end".
Action 1.7 cli command "tclsh Loopback1 - Notification.tcl.The goal of this applet is simply wait interface Loopback1 go down, and then launch the applet "-Countdown ' which waits 60 seconds before calling end my TCL script. The pattern of ' countdown time 30 "and the" action 1.0 wait 30 "is my (lack of?". :-)) understand that after counting 30 I need to a trial of the action - but I'm not 100% clear on this? Ironically, he does, in fact, call the TCL script, it does not wait 30 seconds. My current workaround is to simply throw a statement "after 30000' in the TCL script, but I'm really curious to know why it does not work as expected (well, as I expected to work anyway!). Any help would be GREATLY appreciated. Thank you very much!
See you soon,.
Travis
See my response to https://supportforums.cisco.com/discussion/13009231/eem-applet-wont-fire... . What you do not work, so you should not call tclsh to EEM anyway.
Maybe you are looking for
-
DVD drive does not burn/erase RS - Satellite P100-347
Hello I bought a Toshiba Satellite p100-347 PSPA6E laptop computer. It has a DVD burner with model number: HL-DT-ST DVDRAM GMA-4082N (firmware pt06). It has capabilities to burn any DVD (please see example using dvdino: http://tinyurl.com/2hbpqv). Ho
-
My phone died last night, and as I plugged it to load, it came with the signal telling me to plug my charger for my phone. I tried to charge my phone about 4 other chargers that are in my house, it's real Apple Chargers, Chargers of Tesco and one of
-
Wireless card not found after installing win7
Hello I reformatted my Dell Vostro 360 desktop all-in-one computer last night and then I tried to install all the drivers. Initially when I inserted the disc, any driver is checked which means that they have detected the material. Then I tried to ins
-
When the Surface has a direct purchase for HBO Go app?
When the Surface has a direct purchase for HBO Go app? Original title: HBO Go
-
Upgrade to Windows 8.0 Windows 8.1
My upgrade to 8.1 up to 50% install and it starts to install all over again from 0%. Its a cycle without end I tried all of the suggestions posted on the Internet without success. I need to increase to 8.1 before I can upgrade to Windows 10. Can some