Problem with the window "Variables and stack calls ': Options / interpret as

Similar Questions

• Problems with the windows firewall and security

  I have a laptop running under 7 and windows firewall are not available.  I get error x 80070424.  (Windows Firewall cannot access some of your settings)  Most of the posts I read tell me to go to control panel services and start the service of security.  I'd do it except the security service was not FOUND.  Searching for information on how to restore this function is useless.  I really need to solve this problem.  I run malwarebytes on the system and removed a lot of bad things, run Norton power Eraser and it removed another bho, but I can't solve this problem.  Help, please.

  Thank you

  Bob

  Hello Bob,

  Please keep us updated on the status of the issue.

  I suggest you try the steps in this Microsoft support article and check if it helps.

  Windows Update Error 80070002
  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-Error-80070002#1TC=Windows-7

  Windows Update error 800f0826
  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-800f0826#1TC=Windows-7

  I hope this information helps.

  Thank you

• Disabled the HTTPS option in Hotmail and problems with the Windows Firewall, Microsoft Security Essentials and Windows updates.

  Original title: Windows Live Hotmail only opens a new window links e-mail composition!

  I recently put my Windows Live Hotmail account to my default e-mail client in Internet Explorer 8 on my Windows XP SP3 System. Unfortunately, whenever I click on a link to e-mail on a Web page to open a new message, Hotmail tells me, "Sorry, there seems to be a problem with Hotmail right now", and a new/compose message window does not open. I disabled the HTTPS option in Hotmail, which fixed the problem. However, when I went to do a manual update of Windows, I am nailed with a Trojan horse! Apparently, the Windows Firewall and Microsoft Security Essentials have been affected by turning off HTTPS in Hotmail! It's 2012, and it's terribly disappointing that Microsoft only has not ironed out all the imperfections in these services now. If anyone can give me a solution (in simple terms), I would appreciate it!

  Thank you

  Ryan

  Hi Ryan,

  1. you receive messages or error codes when you access Windows updates?

  2. what happens exactly with the Windows Firewall and Microsoft Security Essentials?

  About the update of Windows, the Windows Firewall and Microsoft Security Essentials issues, you may try to launch the FixIt and see if it helps:

  Method 1:

  Resolve security issues to protect and secure Windows automatically

  The problem with Microsoft Windows Update is not working

  Method 2:

  You can also refer to article and perform a full scan on your computer by using the Microsoft Safety Scanner.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  On the Windows Live Hotmail account, you can publish your request in instances of Windows Live to get help:

  http://answers.Microsoft.com/en-us/windowslive

• Problems with the Windows and Windows Update problem of Installation of KB2416472 component.

  Original title: I use SFC. EXE

  Error detected

  How can I fix this, or I have to re - install window again.

  CSI 0000015a [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  The same with 0000015c detail above.

  00000309 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:35:51, CSI Info 0000030b [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:35:51, CSI Info 0000030 c [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "

  00000367 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:38:13, Info CSI 00000369 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-10-08 12:38:13, CSI Info 0000036 [SR] a the item is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
  2010-10-08 12:38:13, CSI Info 0000036 c [SR] full repair

  Having a problem with the Update window for

  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2416472)

  I followed the recommendation, that nothing has changed.

  Download size: 4.7 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow a malicious user to compromise your Windows system that is running the Microsoft .NET Framework and gain access to information. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.

  Thank you

  Hello

  Problems with the Windows Sidebar?

  It seems that the problem is related to the Windows Sidebar. Remove all third-party sidebar gadgets if

  Follow these steps and check if it helps.

  Logon as administrator-

  a. If the sidebar is running - make a right click on the sidebar near the lower clock icon right in and out

  b. Click Start - Type "CMD" in the search box - find top - right click it and run as administrator.

  c. replace C:\Program Files\Windows Sidebar by copying and pasting this command->

  CD C:\Program Files\Windows Sidebar
   
  d. press enter (this is assuming that your sidebar is on C:, otherwise use the letter of the drive is on)

  Guest should be--> C:\Program Files\Windows Sidebar >

  e. then copy and paste each of them following their tour to enter

  regsvr32-u sbdrop.dll

  regsvr32-u wlsrvc.dll

  regsvr32 atl.dll

  regsvr32 sbdrop.dll

  regsvr32 wlsrvc.dll

  Sidebar should now work.

  Also if you scan SFC does not fix a corrupted system file, you can follow the steps from the link below.

  Look under "'If the System File Checker tool can not repair a file, proceed as follows :" "

  As with regard to the installation of KB2416472, to install this hotfix, you must have Windows Installer 3.1 or a later version installed on the computer. To get the latest version of Windows Installer, see the following Microsoft Web site.

  Windows install 4.5 Redistributable
  For maore information, see: http://support.microsoft.com/kb/2416472

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Anyone know if there is a problem with the "Windows Update" site? Since May 11, 2010...

  Anyone know if there is a problem with the "Windows Update" site? As of May 11, 2010 I could not access it for 2 days now.  I get an error report indicating that he has a "problem with the site '... Not sure if it's my computer or the site itself. I just need to check updates and download them. I would be grateful for any feedback...  Thank you!
  ~ Jenifer

  It is without a doubt.  There were a few patches published today, and I was able to update all my machines successfully.  This looks more like a virus problem.  Have you run a virus scan recently?  Many times, if you are infected the virus will prevent you to access Windows Update.

  You can also use Microsoft Fix It to reset the Windows Update components: http://support.microsoft.com/kb/971058.  This could also be your problem.

  Let me know how it goes,

  Barbara

• Have a problem with the Windows XP where he did not finish the boot.

  Have a problem with the Windows XP where he did not finish the boot. Ran remote console and @ the c: > guest tried to run chkdsk/r/p and received the error message "invaild drive. I put the drive in the argument?

  Hello Tmagic,

  Thank you for your message.  The correct format is below:
  chkdsk volume: (switches, e.g./r/p)
  
  
  example: chkdsk c: /r /p
  
  
  If these results find but cannot fix all the mistakes, you can also check with the manufacturer of your drive and possibly download a utility that will check the errors and repairs.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Message 'there is a problem with the Windows Installer package

  I have Vista 64-bit Service pack 2

  On my computer HP ProtectSmart Hard Drive Protection has stopped working... .it shows such as the disabled and 'activate' is grey.

  I went to HP to download the new version.  It downloaded, but then to install I got the following message:

  "There is a problem with the Windows Installer Package.  A program run as part of the Setup did not finish as expected.  Contact your supplier of staff or the package of support ".

  How can I fix?

  Please help pleas...

  Thank you

  "C:\Windows\system32\msiexec.exe'-I 'C:\Users\David Candy\AppData\Local\Temp\IPDT_Install.msi '.

  Is the command line to install a particular product. Use the Task Manager to find your command line.

  Then change to add logging.

  "C:\Windows\system32\msiexec.exe" - working '% userprofile%\desktop\install.log'-I 'C:\Users\David Candy\AppData\Local\Temp\IPDT_Install.msi '.

  FixIt

  Microsoft has a range of automatic programs to solve common problems. To see Windows Installer problems

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  
  --

• Everyone has a problem with the Windows Explorer permanently closing?

  * Original title: Windows Explorer

  Everyone knows about a problem with the Windows Explorer (not Internet Explorer) without interruption closing? It is not fair on 1 computer, I have 2 desktops and 2 laptops, and it does on 4 of them. They are all running Windows 7, (1 to the publishing house, 1A Ultimate and 2 Professional).  I can right click on something, even on the desktop, and most of the time, I get a message that Windows Explorer has stopped and the ability to close or wait for it to respond. I have normally not 30 minutes or more to wait so that he could respond and if I close it, then it does nothing. I've done all updates are recommended for all my computers, I did the defragmentation, disk check, etc and it still continues. I need help, please. I am so sick and tired of what I am about to go to a Mac and I don't like Mac computers, but said there is much less of a problem.

  You have loaded all 3rd party "Add-ons" in common to all PC? For example (this is an old post Vista but gives the general idea) - http://answers.microsoft.com/en-us/windows/forum/windows_vista-desktop/windows-explorer-crashes-on-right-click/719385e6-fff5-498d-807c-103bf0344f44?page=1&tm=1423414000974 and see Ramesh respond.

  If not, is there clues in the log of events (errors) in common on all computers where the crash?

• Error1722 problem with the windows package install.

  I try to install the Cisco VPN software and I get error 1722.  Says that there is a problem with the windows package install.  How can I fix it?

  This is a general error and often a problem with the installation program itself, not Windows.

  Download the installer for the latest version taken support your version of Windows (32-bit / 64-bit),

  and give him another chance.

  If problem persistst, redirect your question to the Forum of Cisco's Support of TechNet.

  They will be able to help you the best.

  https://supportforums.Cisco.com/

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• Problems with the windows troubleshooting utility. Error code: 0 x 80070002

  Original title:

  Problems with the windows troubleshooting tool

  Whenever I run the Troubleshooting Guide for things like a problem of wireless network I get this error

  An error occurred during troubleshooting:
  An unexpected error has occurred. The Troubleshooting Wizard can not continue.
  Identifier of the package: PeformanceDiagnostic
  Path: No Local package
  Error code: 0 x 80070002
  Source: engine
  User: SCOTTSLAPTOP\Scott
  Background: high

  Hello

  1. the problem occurs with all the troubleshooters you trying to run?
  2. why you try to run the troubleshooter?

  3. Since when are you facing this problem?

  Note:
  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an inplace upgrade.

  You can try to do an inplace upgrade and check if this gives a probable solution.
  Check the following link to see how to perform an inplace upgrade.
  http://support.Microsoft.com/kb/2255099

  I hope this helps.

• How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

  How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

  It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

  Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

• Equium L10: Problem with the main battery and battery RTC

  Hello

  I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

  Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

  About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

  The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

  Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

  Concerning

  Brave0

  Hi Brave0,

  The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

  Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

  With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

  Kind regards

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Photoshop has been giving me the warning:

  Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

  No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

  Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).