Identify the obscure LabVIEW method
Hi all
I update a LabVIEW project that was written in 3.x and I came across a LabVIEW method that I've never seen before and I can't understand what he's doing.
Any ideas?
m3rl3n wrote:
Hi all
I update a LabVIEW project that was written in 3.x and I came across a LabVIEW method that I've never seen before and I can't understand what he's doing.
Any ideas?
What 'method' are you talking about? I don't see any.
For this image, it is enough to click No Subvi and select "enable access to the database.
Tags: NI Software
Similar Questions
-
Identify the official gcc (or supported) version for a given version of Labview
As far as I know, there is no web page OR identify the official (or at least, taken in charge) gcc / g ++ version for a LabVIEW given output.
By "official version", I mean one that is binary compatible with LabVIEW executable file (i.e. the binary).
NOR must provide this information (as well as The Mathworks for Matlab). Here, here's a tip for vs information:
1. the cd in your install directory local labview (i.e. the binary labview where)
2. type the following command: strings. / labview | grep GLIBCXX
3. identify the GLIBCXX version (i.e. stdlibc ++) highest in the resulting list (say GLIBCXX_3.4.9 for LabVIEW 13)
4. open your favorite web browser and visit the gcc ABI policy and guidelines page
5. search for GLIBCXX identified in step 3 (which is GLIBCXX_3.4.9 in our case)
6. you should find something like: GCC 4.2.0: GLIBCXX_3.4.9
7 pray have the corresponding version of gcc (i.e. 4.2.0 here) installed on your host computer or, at least, to have the corresponding manual available for your platform
8. If step 7 fails, be prepared either: recompile the gcc version required, upgrade your operating system, or update your copy of LabVIEW
Hello
It depends on the operating system you are using:
http://zone.NI.com/reference/en-XX/help/371361G-01/lvhowto/compiling_cin_source/
For Linux of LabVIEW, you have a list of libstdc ++ supported:
http://digital.NI.com/public.nsf/allkb/4596349739E988088625761C005B197E
LabVIEW windows, is Microsoft Visual C++:
http://www.NI.com/white-paper/3056/en/
http://digital.NI.com/public.nsf/allkb/6229347C7982CC81862576E30076A4AE?OpenDocument
If you are using GCC reaaly, there are different workaround solution, withour support:
http://forums.NI.com/T5/LabVIEW/creating-a-DLL-including-Manager-support-in-MinGW-GCC/TD-p/633123
Best regards
-
How to identify the App created planing method
Hello
Can someone say how do we identify the method which has been built in an existing planning application (Version 9.3)? (EPMA or classic)Hello
A quick test is to log in as an administrator planning, go to administration > dimensions > if you cannot change a member then it is EPMA, if you can that's classic.
Or connect to the EPMA, check if you see if you can see the application of planning for the application.See you soon
John
http://John-Goodwin.blogspot.com/ -
Method to identify the user isuing ALTER SYSTEM
Hi all
We have a database of test in which APPS (a power user) access is given to all developers. We had kept TIMED_STATISTIC to false in this case, so that the load is reduced to the minimum. From these last days, we change this value at the level of the system, and we are unable to identify the person.
Is there a way I can write a database trigger to capture this specific ALTER SYSTEM event? Any help in this regard is highly appreciated.
Kind regards
LucetteLucette wrote:
Hi Keita,
My mistake, I do not pay attention on behalf of the author. Forgive me for my doubts; they may be stupid - I'm not a DBA, but I'm a preparer SQL.If I use audit_sys_operations - he will capture all ALTER SYSTEM orders by any user. Then narrow it down us to the test user by issuing ALTER AUDIT test SYSTEM. Please correct me if I'm wrong.
In my PB, there are at least 300 developers work at the moment - is possible to limit this information to a specific event to ALTER SYSTEM? In addition, we are in a WINDOWs environment. If cron does not work. It would be much better if I could device a method to write the details of the session incriminated at a table.
Do you think below would work?
create or replace TRIGGER UNI. USYSTEM_B_ALTER_SYS_AUDIT_TRIG
FRONT
CREATE OR CHANGE OR DROP OR TRUNCATE
ON THE SYSTEM. SCHEMA
declare
......Kind regards
LucettePublished by: lollipop on October 12, 2009 12:18
You don't need to set the parameter audit_sys_operations . What you need is that one specific user to AUDIT
-
How to identify the hardware CAN connected to the PC
Hello
Is it possible to identify the devices CAN to your PC via the USB port, I am able to see the name of material CAN logged in the Device Manager list. Even I want to read using LabVIEW.
Regars
Visuman
Use of the vi in the zip file.
And the "Devcon.exe" will show you the list of devices.
With this list, you can sort the channel search on the EIB devices.
-
Identify the orientation of the device
How we can identify the direction of the blackberry device. (landscape or Potrait)
Hello
Take a look at the net.rim.device.api.system.Display, getOrientation method class.
Kind regards
Jochen
-
Identify the image click with canvas
Hello
I have a method of painting in which I created a bitmap using the graphics.drawBitmap method. Now my question is if we can identify the click on this bitmap... Is there a way to do it?... If so, how?
You can capture this by substituting cursorClick.
-
How to identify the icon in the system tray
I have an icon in my system tray that does not display what it is with the mouse pointer. Click left or right shows nothing.
Double click does nothing.
How can I identify the program behind this icon?
Hello
What looks like the icon?
Check startup programs to see if you can identify what it is responsible.
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlAutoruns - free - see what programs are configured so that it starts automatically when your
system boots and you log in. Autoruns is also the full list of registry and files
locations where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
=========================================================He could stand in a previously removed program.
Other methods to simply remove the icons.
How to reset and clean the old Windows 7 Notification area icons
http://www.SevenForums.com/tutorials/13102-notification-area-icons-reset.htmlRemoval of the old icons of Notification in Windows 7
http://www.gHacks.NET/2010/02/09/remove-old-notification-icons-in-Windows-7/How to customize claire XP and icons of Notifications (system tray) in Windows 7/Vista
http://www.Winhelponline.com/blog/clear-customize-notifications-tray-items-Windows-7-Vista-XP/I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Identify the field updated or deleted in the Contacts.
Hi all
I have a question.
I write PIMListListener for contacts.
is it possible to identify the updted or remove fields in contacts using pimlements of PIMListListener?
Thanks in advance.
Sorry for my English.
As far as I know, there are no specific listener that will tell you what specific item field has been updated. You must write your own logic to him.
Will implementation of PIMListListene, you know what PIMItem has been added, deleted, or updated. In the case of update, this listening port will also give you the old PIMItem object to the new object PIMItem.
itemRemoved (PointPIMItem )
itemUpdated (PIMItem oldItem, PIMItem newItem)
You can get the value of fields using object PIMItem methods and compare those values for the required information updattion. It's your own logic.
If someone can suggest a better approach, please go ahead.
~ Brigitte
-
Printer prints not; Unable to identify the problem of troubleshooting
I have a HP OfficeJet 6500 (OS is Windows 7) on a wireless network that do not print. . Ran the Printing Troubleshooter, but it has been unable to identify the problem.
Hello
1. when it changes on the computer prior to this question?
2. do you get an error message when you try to print?
3. If so, what is the exact error code/message you get?
Perform the following methods and check:
Method 1: Run the fixit from following link and:
Problems printing and printing errors
Automatically diagnose and repair when you cannot print or for problems setting up a printer, connecting to a network printer and related errors.
http://support.Microsoft.com/mats/printing_problems/
Method 2:
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Let us know if it helps.
-
How to identify the source file and edit reports in Oracle Sales R12.1.3
We use R12.1.3 with Database 11g.
I would like to know - how to change the report.
--------------------------------------------------------------------
For example if I want to edit a report in the module INVENTORY existing any report.
- After the name of the report identify the concurrent program
- The program contributing to identify the name of the executable file
- In the executable file name identify the
- Method of execution: Oracle report
- Running file: name of the source file for the report
- Take backup and edit the report and replace the report in the TOP >
But in the sales module (it is not form based Oracle - I think it is developed on OAF)
I would like to know how to identify and modify the report.
According to standard - module sales Oracle provides three report and according to our Advisor to use these three reports, we need to install BI
So we must find the solution through internal developments
Hello
Set the option to profile ' FND: Diagnostics ' to 'Yes' at the level of the user and you will be able to get 'on this Page' link at the bottom of the page.
Kind regards
Zahid
-
identify the State of a new line created in VO before committing
Hello world
I use jdev 11.1.1.7.0
Is it possible to identify the State of a new line created in VO before committing (I mean that we can realize that this line is new without use of isDirty())
Habib
Concerning
Ashish Awasthi blogged about this earlier. I have used this method in all my projects since I found it, and it works fine.
http://www.awasthiashish.com/2014/04/performing-partial-rollback-undo.html
This code is the interesting part for your need:
public Integer getRowStatusTrans() {}
/ * Here the rank is variable reference in the collection, this expression returns an int value if it is
2 change
0-new
1 - unmodified
initialized-1-
*/
entityState bytes = this.getEntity (0) .getEntityState ();
return new Integer (entityState);
}
-
To identify the address IP of BMC in ESXi console
Hello
Is there a command to esxcli to identify the address IP of BMC of the node started ESXI?
In the Linux machine, 'ipmitool lan print' will list the of the BMC IP address assigned to the node...
any ideas?
Unfortunately it seems not exist a standard esxcli of builtin command to query the IP Address of management controller.
But you can query local shell ESXi CIM providers and get IP address like this:
# enum_instances OMC_IPMIIPProtocolEndpoint root/cimv2 | grep IPv4Address
IPv4Address = 10.2.1.17
You can do also makes a request of information the remote host CIM, for example like this:
$ curl - sk https://myesxihost.local:5989 / cimom -x POST root user.
H ' content-type: application/xml; charset = "utf-8" '.
H ' CIMMethod: ' EnumerateInstances------.
H ' CIMOperation: MethodCall'.
H ' CIMProtocolVersion: 1.0 '.
H ' CIMObject: root/cimv2 '.
-data '
' | grep-A1 IPv4AddressEnter password for user "root": Home
10.2.1.17 These are generic methods of CIM which should work with any standard IPMI device and don't require any special drivers/extensions by a hardware vendor.
-
How do to identify the documents called "models of library" using the RESTful API?
How do to identify the documents called "models of library" using the RESTful API? Furthermore, what constitutes a document to be a "model of library"? I see nothing in the libraryDocuments RESTful documentation that describes this type of document, such as presented on the tab 'Manage' my developer account. Please see the screenshot below. There is a model of Document named "[DEMO ONLY] Test model" listed under "Library Templates" and I try to figure out which classifies that document to be included this way and how does produce a similar announcement by using the RESTful API.
Thank you!
Hello
You can connect to access library models using the REST API, use 'GET /libraryDocuments' allowing to recover documents in library for a user. Models are created in the account of EchoSign, which later are accessible via the REST method mentioned above.
Jat
-
Changing the content ID method
Hi all
What about the content ID of the content whether active documents/web or etc.
During export/import content, is there a way to change the content ID to something else batch and no severance of the relationship with the Site that use web/content or other assets?
for example. Initial content for content ID is ABC_XXXX01 XYZ_XXXX01where ABC and XYZ view the prefix and the XXXX01 is to refer to the sequence number
Or what is the common/practice method to change the content for an entire site id?
Thank youOr what is the common/practice method to change the content for an entire site id?
In general, archive them is option one here - you should be able to define export/import content items and to define the logic of transformation as part of it.
I don't know everything, if it maintains the link also to WCM objects. For example,.
-you have a static list, referring to a piece of content, which now has a new ID, or
-you have a region assigned to a content element, now with a new code.It should be relatively easy to identify.
UCM 11 g since, I think, PS3, also contains an export/import feature a Web site. So, you could also try this one.
Maybe you are looking for
-
2 newspaper obits duplicate 2 times
When I go to the local obits nytimes.com and portlandpressherald.com, two sites repeat local obits. o/s win7 home premium. 4 GB ram processor intel core 3 cpu. just started today.
-
TCP ports not working does not - App installed on C: (Mac OS)
Three of us are scratching our heads... Background: the server machine, we install on is a build of image provided by a clients outsource partner, so we don't know all the background of the build. An application that has been installed on the partiti
-
What are the causes of repetative corrupted user profiles?
Previously, I had only 2 active user accounts. Mine (admin) and that of another user (standard). The two profiles damaged in June - fixed finally. After that, I added another admin account and a guest account. 4 days ago, all profiles, but the co
-
Did a clean install of Vista - cannot depend on an advocate, I am missing the updates?
I did a clean install of Vista and thought that I did it correctly... but 1. I can not turn on Windows Defender. It seems to hang and then I get the 0x800705b4 error message and that the delay expired. 2. While diagnosing the original problem that fi
-
Curve B Smartphones to blackBerry 8520
Hi just new to the site I was looking to see if anyone else had a flaw here b curve 8520 it which will not send or receive texts or send or receive calls got the full signal and the internet works I'm on work net orange and who can't seem to find the