Identifying computer not not Kodak ESP 5210 printer wireless

Similar Questions

• Wi Fi problem with Kodak ESP 5210 printer

  I have a laptop Toshiba L650 - 12 p which is connected to the internet via wi - fi to netgear DG834G router.

  I recently bought a Kodak ESP 5210 all in one wireless printer.

  I followed the installation instructions and can confirm that the printer is connected to the router via a Wi - fi but my laptop cannot print on it (message reads error printer not responding) the printer is not listed under network devices.

  However if I connect my laptop to the router with an ethernet cable, I am able to print.

  This suggests to me that the printer is connected and working properly and the printer is correctly installed but only setting to laptop (possibly windows 7) blocking the wi - fi connection?

  I hope that you are able to help me.

  Alan

  For Windows Vista:

  (On the computer you are trying to print from)

  Go to the control panel

  Click Windows Security Center

  In the left column, click on Windows Firewall

  In the box on the right, click on change settings

  Click on continue button

  Go to the Exceptions tab

  Click Add a program

  Go to your printers program

  Find it and click OK

  Out of everything you have open by pressing OK or close, and try to print

  Worked for me in any case

• When I print from my computer to a Kodak ESP C315 printer it shows only a blank page

  The winding progress bar shows no progress and the printer produces a blank page

  Hello Ian_856,

  It worked before?  If so, what has changed?

  Let's start by download the latest drivers and software from Kodak and see if that helps.

  When you install the drivers, it is important to perform the following actions:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver.

  4 reinstall the printer.

  Several references to printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• Can not find the driver of scan to PRINTER ALL-IN-ONE KODAK ESP 5210

  Can not find the driver of scan to PRINTER ALL-IN-ONE KODAK ESP 5210. Device Manager says last driver is installed.

  Moved from feedback

  Original title: scan driver

  Hello Timmy,

  Please take a look at the following link for the driver\firmware for your printer.

  KODAK ESP 5210 All-in-One Printer Firmware - WINDOWS operating systems

  If this is not enough, you may have contact with Kodak support for the same. Thank you.

• MSXML6_x86 will not install updateing KODAK ESP 7 printer

  I'm running windows XP (sp3) installed when you try to update my kodak ESP 7 printer with Version 7.6, it comes out of the old software, then stalls when it comes of retries MSXML6_x86.msi will not work and cancel cancel just to uninstall everything so you end up with no printer. but I can't install the old printer from the disk that came with it. but this is the 3.1 version then I'm left with the old renovation AIO Center. Kodak online support does know how to fix this problem either.

  First things first...

  Assuming that your problem has not been resolved (or your question has not been answered to your satisfaction), please uncheck my previous answer as the ANSWER and score than the other answers as RESPONSE unless & until your problems have been solved (or you decide to post in another forum instead). Please do this now, before answering this post, to avoid any confusion. Thank you.

  

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  REPOSTING: Only one 1 antivirus should be installed & loading at startup.

  Note: Component Registry Cleaner in CCleaner invite you to save the changes you want to make backups. If you have never done so, there is no backups.

  ACTIONS:

  1 restore all backups in the centre of Advanced SystemCare relief, and then restart your computer.

  2 uninstall McAfee Security Center or Advanced SystemCare with Antivirus & restart again.

  3. in your very next answer, confirm that you have completed above #1 & tell me what application you have uninstalled in #2.

  The list also numbers KB 12 updates that you installed when you run manual checking of updates. Don't forget, all updates will be listed in Add/Remove programs.

  PS: Please hold off on the attempt to upgrade your printing software for now. Speaking of which, have you tried to install the upgrade manually or is the upgrade offered through Windows Update?

• I try to install the Kodak ESP C310 printer, but it is said that a firewall is not blocking the installation. Can you help me?

  I try to install the Kodak ESP C310 printer, but it is said that a firewall is not blocking the installation. Can you help me? I use windows XP. I tried port 5353 and this is what allows to Hello.

  You can check this article, but it's about Firefox itself do not have access.

  http://KB.mozillazine.org/firewalls

  Could you give the exact wording and punctuation of the message and try Googling yourself - when google you do not without importance and punctuation, words of group who are always together as original in quotation marks or hyphens message that google will look for these words together in that order.

• Why can't I connect MY Kodak ESP 5 printer to MY computer?

  Why can't I connect MY Kodak ESP 5 printer to MY computer?

  Why can't I connect MY Kodak ESP 5 printer to MY computer?

  Hello

  The first step will contact Kodak to search for the latest drivers and ask about any known issues installing this printer for the version of Windows you have installed.

  Kodak - Support Home Page:

  http://support.en.kodak.com/app/home/src/gosupport/selected/true

  Find answers: Kodak products

  http://support.en.kodak.com/app/answers/list/session/L3RpbWUvMTM2NDY2ODYyMy9zaWQvdnVDUU50bWw%3D%2Fselected%2Ftrue/selected/true

  Concerning

• Kodak ESP 9250 printer troubleshooting

  I use an inspiron 1525 laptop and an Ethernet connection. I recently bought a Kodak all in one printer and the origin of my printer was printing; However, later, I keep getting a message that the printer is not responding. I saw the main menu and he said that my printer has no link; so, I unplugged and replugged and still can't understand the problem... My model is the Kodak ESP 9250, who does not have the option of maintenance service at home... can I do to retrieve my connection?

  Hi Sharletta,

  ·         What is the service pack installed on your computer?

  Try the methods and check the results below:

  Method 1:

  Run the troubleshooter from the link below: printing problems and printing errors:http://support.microsoft.com/mats/printing_problems/en-us

  Method 2:

  Check if there are any drivers listed in the printer server properties and delete the same.

  You can use the command to remove drivers below. Follow these steps:

  a. click on start

  b. click command prompt

  c. right-click on the option of cmd.exe and select run as administrator

  d. type: printui/s/T2

  e. opens the printer server properties page

  f. click on the port tab and remove port

  Once the printer driver is deleted, then you can check the link below to install the printer drivers.

  Link: How to download and install the latest printer driver from your printer manufacturer's Web site:http://support.microsoft.com/gp/pc_print_introduction

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I recentley bought a kodak esp c310 printer - is this compatible for windows xp

  where can I find a list of the printers compatible windows xp

  Download and install: Home Center software to print all in one KODAK (including drivers)

  Then download and install: KODAK ESP C310 firmware of the all-in-one - printer WINDOWS operating systems

• Windows 7 won't print on Windows XP Kodak ESP 3250 printer.

  I am able to access all files on the Windows XP desktop from my Windows 7 laptop.  However, I can't print.  The printer indicates in my devices on my Windows 7 computer. It shows installed.  The 'shared' selection is checked on both computers.  I installed the software for Windows XP desktop and I installed the software for Windows 7 on my laptop.  I reinstalled the software several times, pilots and etc.  I rebooted the computer and disconnected and reconnected the printer.  I am still unable to print from my Windows 7 laptop after working on this all day.  Help, please!

  Has exactly the same problem, re-installed drivers CD, then the drivers windows 7, has been pulling out my hair!

  SOLUTION:

  Found by chance, I was going through all the parameters, one by one, change, so I try to print!

  It seemed to work, I don't know why...

  It is an idiots guide, step by step:

  Access devices and printers ,

  Right-click on the Kodak ESP3200 series (printer icon)

  Select the printer properties

  Now choose the Advanced tab d

  Click on the "printer... processor .  button

  You should see two choices of the processor of the printer - "KODAK EASYSHARE " and "winprint ".

  Choose winprint , and then choose the type of default RAW data

  Oh , I don't know why it works, it has simply.

• I have a Kodak ESP 3250 printer and guard appearing the following message "the user interface file is not found (Code: 101-8200)"

  Tried the solutions suggested in the windows click here for more information, but does not. The programs seem to work but cannot get rid of the message. Thank you.

  Windows 7 operating system

  Hi Michael,

  1. don't you make changes to the computer before this problem?

  2. What are all the steps you have done?

  3. when exactly you get this message?

  Follow these methods.

  Method 1.

  Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  Follow the link given to open the Hardware Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  We can refer to this article and check if that helps.

  Error: "the UI file is missing" (code 101-8200): http://support.en.kodak.ca/app/answers/detail/a_id/31863/selected/true

  Let us know if you need help with this question, we will be happy to offer you our help.

• Kodak ESP 9250 printer will not connect... .and printing...

  Originally installed as wireless; order this week.  Now what?

  Hi HelenLedgerwood,

  1. have you done any hardware changes or software on your computer before this problem?

  2. you receive any code or an error message when you try to print?

  You can follow this link & check if the problem persists.

  Printer in Windows problems

  Hope the helps of information.
  Please post back and we do know.

• Kodak ESP 3200 printer stops spool error and will not print. Tried many times from print print spooler. Following other instructions as starting all over. Nothing seems to work. Help

  Spooler subsystem App stopped working

  Event problem APPCRASH

  application name spoolsv.exe

  6.0.6002.18294

  exception code c0000374

  exception code c0000374

  This means that the heap corruption took place.

  Try installing the latest for your Kodak printer driver.

  If this doesn't fix it, please download this reg from my SkyDrive file:

  http://CID-128fc518635be2dc.Office.live.com/self.aspx/.public/Ms%20Foren/registry/LocalDumps.reg

  and double click on the file to import.

  When an application crashes, Windows Error Reporting Service [1] creates a dmp under C:\Localdumps. Please download the dump (zip it first) to your public Skydrive folder [2] and post the link here. I take a look at the discharge with the debugger, maybe that I can see the cause.

  André

  [1] http://msdn.microsoft.com/en-us/library/bb787181%28VS.85%29.aspx
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [2]

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• computer not found when scanning printer form on a computer

  Hello

  I have a HP Photosmart 5520 all-in-one printer. I have 2 operating systems on my computer: OS X 10.9 Mavericks and Windows 7. The printer is connected to my router wireless. The printer works correctly under Windows 7, but in the Mavericks, I can't scanner from the scanner to the computer (it is said: machine not found). What can I do if the Analyzer detects my computer?

  Problem solved by the installation of HP - inkjet ink-SW-OSX - Mavericks_v12.34.42.dmg

• Error code 101-5096 when trying to install a Kodak ESP 5250 printer software

  Could not load the software provided with the printer and also unable to download the program from the Kodak site as well. Any help with this would be greatly appreciated.

  Hi DarylToole,
   
  -You are able to install other applications without any problem?
   
  Try the steps listed in the article below and check if it helps fix the problem:
   

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer