computer not found when scanning printer form on a computer

Similar Questions

• Receive the error message"MFC-7860DW LAN is not found" when scanning

  Original title: printer all-in-one Brother MFC-7860DW after Windows update problem

  Shortly after that I installed an update through Windows for my Brother multifunction printer, I could not scan documents to my printer wireless to my Toshiba laptop.  I got an error message saying "MFC-7860DW LAN is not found."  Yet the wireless connection between the printer and the router is fine, and I can print from my computer very well also.  I did this for a long time so I have something had happened recently.  The update was allegedly from brother.  I spoke with the brother support and they gave me a way to scan the computer using Windows Fax & scan, but I really need to be able to make it from the printer itself.

  I have reset the PC to a restore point before that I did the update of Windows, and I uninstalled and reinstalled the software of the printer 3 times, including the connection with the wireless system, all without effect.  When I check the Brother Installation Diagnostics file, it shows that the scanner driver has no installation and connection.  All the other drivers installed correctly.

  Any ideas how to install my scanner driver?  Thank you!

  Try Ronald ron's response

  Altho, reg cleaner ccleaner can erase valid entries reg sometimes. So, I don't know if I would use that

• Get a Bluetooth device message"driver is not found when you connect Bluetooth

  original title: Bluetooth connectivity problems

  Hello

  I own both a T-900 of Fujitsu (64-bit Windows 7) and a HTC Rezound and have been using bluetooth to transfer files between them until a few days ago. Out of nowhere, bluetooth does not work anymore and now shows that "Bluetooth device" driver is not found. I tried to uninstall and reinstall it from many different sites, try different, but for some reason bluetooth packages some do not fix the problem of Bluetooth device. My computer can not find other bluetooth devices, and my phone does not recognize my computer as a bluetooth, even with the two device are detectable. If someone had a similar problem or knows how to fix Bluetooth device? Any help is greatly appreciated!

  Hi autumnv92,

  Were there any changes made to the computer before the question?
   
  Check out the following and check:
  Method 1:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2:
  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device
  http://support.Microsoft.com/kb/2654568

   
  Method 3:
  See the following steps:
  1. turn on your bluetooth device
  2. right-click the icon for the device in the system status bar
  3. choose / click on "show bluetooth devices.
  4. There will be a list of devices you never associate (like your phone, another laptop, etc.).
  5. simply remove from the list.
  And the warning like "(pilote de périphérique Bluetooth périphérique est introuvable) will not show up again."
   
  Method 4:
  Bluetooth devices do not work correctly on a computer that is running Windows 7

  http://support.Microsoft.com/kb/980396

  
   
  Also check these links for more information:
    
  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

   
  Hope this information helps.

• Tab Counter 1.9.3 says not found when apllication downloaded sound

  Tab Counter 1.9.3 said apllication not found when its downloaded, it is there in the downloads but open and work habit

  Well Yes, it works great now thanks a lot

• Error code: 800ccc0d, the server is not found, when I try to connect to servers using Windows Live Mail 2011 news

  Original title: 800ccc0d ERROR FIX

  Hi people, I am getting an error ("the server is not found") when trying to connect to my news server. Œuvres mail (hotmail) ok, but I can't connect to one of my two news servers I use (teranews and broadstripe). I've included the error code I have in the title above. I use Windows Live Mail 2011.

  Anyone has any ideas for patches?

  Hi kb3jlc,

  If this problem occurs only with Windows Live mail, you can post the question in the Windows Live community:

  http://windowslivehelp.com/product.aspx?ProductID=15

  Hope this information is useful.

• Hello! I get the message "File not found" when I try to access my photos

  Hello! I get the message "File not found" when I try to access my photos in lightroom, and I can't find my photos! I had cleaned up my Mac and deleted by mistake in a different location and now only a gray peak appears in LR, along cable message, file not found. I had saved the raw disk backup files, but it won't let me import into lightroom. (Alright will appear in the import box, but it won't let me even click on it to add. Help!

  In the grid, right-click on an image of 'missing', select 'go to the folder in the library.

  If the folder view does not resemble what you show Finder, right-click on a folder and select 'Show the parent' '; repeat if necessary.

  This will show you where LR thinks that the file was originally.

  You can try to put the images where they were, or place them go elsewhere and 'move' the file in LR.

• Serial number is valid, but qualify product not found when I install the product very

  Serial number is valid, but qualify product not found when I install the product very CS5, development of applications from an upgrade of the disk swap

  installed trial, then what serial application and such can not find I just took CS4 and added this series and CS5 installed, weird, but I'll take

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Why I get 'profile not found', when I log on my computer?

  When I connect to my computer windows xp sp3 support office and a massage appear (profile not found). The I clik OK and go to work.

  Check this box:

  http://support.Microsoft.com/kb/947242

  Create a new see user account n

• Error 404 - NOT FOUND when you run a form in the form of 11 g

  Hi all
  
  I had this problem when I run the forms using internet explore.
  
  I'm working on forms 11g using weblogic 10.3 for the deployment of web forms.
  
  Error 404 - not found
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.5 404 not found
  Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
  
  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
  
  Can someone tell me where it went wrong.
  
  Thank you

  Let's start by clearing up some confusion.

  PORTS
  --------------
  Version 11.1.1.x here are how the common ports are defined by default:

  1 HTTP Server - 8888
  2 WLS_FORMS - 9001
  3 WLS_REPORTS - 9002
  4 WLS Admin Server - 7001

  So, if you understand how ports work in general, you should see that there are two ways to run a form. You can go through the HTTP server or directly call the WLS_FORMS. This means that both of the following might work, although one would be a direct path and the other is route the request through the HTTP server:

• http://ie1fdtfc5zl1s:9001/forms/frmservlet? config = frmdemo
  
• http://ie1fdtfc5zl1s:8888/forms/frmservlet? config = frmdemo

  Port 7001, will always be the port of the default server for the classic domain administrator. By default, the only thing that you can do from here is EM or WLS Console access.

  As for the question of the AMT, by default, the generator and the runtime will wait to find tnsnames.ora in hospitality \config Instance so be sure you add the correct entries to the correct file.

  You can hardcode a path to the file you want to use by setting TNS_ADMIN in default.env (e.g. TNS_ADMIN = C:\Oracle\mytnsdirectory). This will only apply to execution of forms and not the manufacturer.

  Also, here is something that is often a source of confusion for many people... just because you started your form in the constructor does not mean that the form running has nothing to do with the manufacturer at this time. In other words, when you click RunForm button in the constructor all that you do is pass a url in a browser. The browser and the form do not use the constructor parameters except that can be passed in the URL (e.g. name of user and password). Running of all forms are considered to be 'runtime '. This means that all information environment to an active form configuration must be defined in default.env. The manufacturer, on the other hand will be based on the system variable, the Windows registry (or shell if under Unix).

• McAfee file is not found when I try to start the services stopped in the Computer Management Console.

  McAfee services ceased.  When I go to Services and try to start I get an error 2, "the file is not found."  I look in the programs and the file seems to be there.  I believe that the services were stopped due to Game Booster (which has stopped some services when you are playing a game).  I had turned on Game Booster, then I shut down the system without return - turn off Game Booster I believe that some of my services won.

  Uninstall mcafee in any case, his despair. Or uninstall it then reinstall it

• Error: 'name of specified path was not found"when importing images

  Original title: ERROR TRYING to IMPORT IMAGES

  When you try to import disc images of scan of my phone, I get message specified path name is not found.  I have not had any problems with this before.  Help, please!

  Hi DBALSLEY,

  ¯ How import you the photos in the card?

  ¯ You can view photos from the SD card?

  Few things to try:

  1. unplug the card and plug it in again. Then try to copy the pictures.

  2. If you tried to transfer images using import to Windows, try to transfer normally and vice versa.

  How can I get pictures from my camera to my computer?

  View and transfer files to and from a memory card

  For more help, please post in this forum: http://forums.sandisk.com/

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get "PAGE not FOUND" when you try to download the drivers for my Laserjet 1320N

  I am trying to download a driver for the HP Laserjet 1320N printer

  The link to my driver download page is here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 18...

  But when I go here and click DOWNLOAD all I get the following error

  > > > > > > > > > > > > >

  This web page is not found.

  No web page was found for the web address:ftp://ftp.hp.com/pub/softlib/software10/COL9747/lj-27308-6/lj1320pcl6win2kxp2003vista.exe

  < < < < < < < < < < < <

  I tried it throughout the day. My internet connection is fine.

  Any help greatly appreciate

  Thank you

  esuerpgood

  SPOT ON!

  

• File not found when you try to call a dll on LabVIEW Real Time machine

  I have a dll called "DLLRTTEST" that I wrote, and claim successfully on my host.  Now, I try to call this dll from a vi that is on my computer in real time.  Currently, I get a message 'error 7 occurred at the crux of library DLLRTTEST.vi. call function' when running

  In the attached screenshot, I try to ensure that the vi that I am running is indeed on the system in real time.  I then use a 'check if file or folder Exists.vi' to confirm that the dll that I'm about to call exists on the system in real time as well.  However, I always get an error "error 7 file not found" from the node call library feature.

  Any help is appreciated.

  Thanks again for all the responses.  As I said earlier, I had already met and solved the problem identified in the link provided by Nathand.  I had to go down to Visual Studio 2008 to go beyond this particular error, after which the app of auditor of the dll in real-time reported my dll needs to run successfully.

  I just got the phone with Jack in charge NEITHER well, and it turns out that I simply had to compile my dll in release mode.  Decommissioning of VS 2008 I got the correct version of dll (msvcr90.dll), but since I am compiling in debug mode, I found myself using msvcr90d.dll (d for debug) who doesn't have my computer in real time.

• How to fix a message on PC WIN XP SP3 "Path was not found" when you try to access a server?

  I have three PCs running Windows XP, SP3.  Two of them are in need of you connecting to a server (2003).  We only use the server as a print server.  There is a HP all-in-one printer connected to the server.

  Everything worked fine until this week when the PC non-server, and server computers could no longer access the internet or sign on the server to activate the printer.  The PC on which I write ths investigation has access to the Internet, but not on the server or printer.

  When I try to sign the server as admin using a remote connection, I get a message "path not found".  When I go to my network places, I do not see the server, nor can I access a virtual drive that is set up on the server for storing shared files.

  I am NOT literate same server; I took the direction with basic knowledge of more 2 years ago.

  Can someone help me solve this issue?  Any help would be greatly appreciated!

  Sandi

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads