IE to load an Exe file

Similar Questions

• How to load an exe file in a secondary?

  I want to deploy an exe file containing a secondary on a system without the LabVIEW development environment. I want to load a different exe in the secondary.

  It missing me something quite basic, but how do I open a reference to the exe? I know how to open run and load a vi in a secondary but how I reference if it is an exe? Reference open vi says that's a unexpected file type.

  In order to avoid an argument,

  The VI includes 'compiled' objects that are updated every time that you run your VI.

  These compiled objects are equivalent for function calls in the execution of labview.

  This is not so different to the behaviour of the .net framework.

  Your basic functions such as +, -, x, /, can be compiled into microcode simple, which requires intelligence will be in the frame or the runtime

  So all is good, it depends on what angle you are looking at him.

• XP will not load some .exe files! and much more

  I accidentally deleting a file in the registry

  You can restore a snapshot of the registry by running a system restore point.

  the day you choose for the restore point will restore the registry in effect on that day.

• Failed to load the exe programs or internet explorer, none of my programs work

  Vista does not load the exe files and a window opens to select the program to start with, then internet explore will not work and is to expire.

  Please run Doug Knox fix .exe (which is not a file .exe so you can run it) and then carefully swipe to the malware.

  http://www.dougknox.com/XP/file_assoc.htm
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  MS - MVP - Elephant Boy computers - don't panic!

• When I run the exe file, it should load the niscope_32.dll why?

  Hello:

  I used scope in my program functions,

  and then I did it in the exe file and the installation file,

  but when I make them to another computer,

  To load the niscope_32.dll, what should I do?

  Hi ylongwu,

  You will need to install the driver OR-Scope on the deployment computer so that the code you can call the driver. You can download the driver from our Web site at drivers and updates the link below by searching our driver OR-Scope and choosing the appropriate version. I also recommend that you include the NOR-Scope driver as an extra Installer for your executable. In the setup of window construction there is a category called additional installers where you can choose the drivers and execution engines to install with your executable file. I've included a screenshot to show what it will look like for LabVIEW 8.x.

  Drivers and updates
  http://Joule.NI.com/nidu/CDs/fn/p/lang/en

  

• I can not load disc Solutions Canon or Turbo Tax DVD. Can't see the exe files.

  Records show but no exe file.  I was able to load another DVD, and he showed an exe file.

  It works fine in xp.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• CC .exe file is not loading. [Please help!]

  Hello

  I tried to download a trial of Adobe CC, but for some reason any, whenever I try to run the downloaded .exe file, it just never came up. I don't get the wheel of continuous loading, I get a different problem. It will not open same. I tried several ways to solve this problem, I even tried the cleaning tool and it didn't work. Please help me out here.

  PROBLEM SOLVED-

  I deleted a file that includes aspects inside and now the .exe file runs correctly. Thanks for the help!

• I have a subscription to adobe for the cc 5.5 and rebuilt my computer to the low load the .exe and the second file. I have windows and after clicking on the .exe has nothing happened?

  I have a subscription to adobe for the cc 5.5 and rebuilt my computer to the low load the .exe and the second file. I have windows and after clicking on the .exe has nothing happened?

  If you have downloaded from here: Download CS5.5 products, please see the instructions to extract the files and install your product.

  Alternatively, you can download it here:

  http://prodesigntools.com/Adobe-CS5-5-direct-download-links.html

  Guinot

• Re: load "TSL633A_TO03.exe" device tergiet. What and how do I do?

  I want to update my Satellite!
  To don't know what it means to "Read me":

  III. load 'TSL633A_TO03.exe' or 'TSL633P_TO03.exe' device tergiet.

  What is "tergiet unit?

  I assume that you are writing about update firmware for the optical disc drive. I don't know what model of laptop you have exactly and which read me file that you mean exactly, but if the optical disk drive works well, and if you do not have a firmware update problems should not be made.

  The target device must be your laptop, but what else?

• Subvis call go dynamically within an exe file (avoiding the error 1003)

  Hello

  I use an architecture where the main program (compiled into an exe) can be supplied with a user-'plugins', which are collections of screw types inside a folder named especially compared to the exe. They can be called in the exe via 'open reference vi' provided by the corresponding strict vi types and corresponding relative paths.

  I want to avoid having to include one of the plugins in some way in the application builder, because users must be able to create own plugins that the request is totally ignore during the generation.

  In principle, this approach works rather well, since these plugins are not extremely complex, but sometimes, I get an error 1003 when loading a plugin.

  I have read many old posts on this error in this particular situation, mainly using versions of LV 7 or 8 (I use 2012). It was suggested to build a source distribution for each plugin, including everything that is used from vi.lib, instr.lib and user.lib. Indeed, it helped in my particular case - however, it bloats the plugin 'distribution' (which consists originally only a couple of the screws of the user) extremely and complicates the development user side.

  Now some good plugins run from in the exe without having to build a distribution source for them (they still use many vi.lib live) while others don't, and I have no idea why...

  These plugins are wrappers for hardware drivers that allow to control any hardware instrument within the main application via a certain API. So, in a particular case, a plugin that produces the error 1003 uses VISA series features (everything inside... \vi.lib\Instr\_visa.llb) and one without error doesn't (yet he uses several features of... \vi.lib\Utility\...).

  I can solve VISA problems in a simple way by including (only) the VISA-vis opportunity (and typedefs) inside the plugin folder and explicitly link to them (i.e. replace the VISA-vis of vi.lib with those copied to the folder of the plugin - I guess that's also what the source distribution).

  However, I'm confused why certain plugins with work of related vi.lib while others screws produce an error 1003 unless these special screws are explicitly distributed and connected with them...

  Oh and just for completeness: all plugins are working fine if the callee in the development system, the problem occurs only if called from an exe file.

  Novgorod wrote:

  However, I'm confused why certain plugins with work of related vi.lib while others screws produce an error 1003 unless these special screws are explicitly distributed and connected with them...

  Oh and just for completeness: all plugins are working fine if the callee in the development system, the problem occurs only if called from an exe file.

  Do plug-ins that work depend on the screw in vi.lib who are already part of your executable file because the main program uses these same screws?

  All the screws that your plugin needs must be available, if applicable can mean to be already loaded into memory (for the main of the application or another plugin), or can be found on the disk and load.  An executable includes all the screws of vi.lib - it includes only those he uses (and the screws that are marked always 'include' in the build specification).  I suspect that the plugins that work only dependent vi.lib screws which are also used by the main executable file.

• Programmatically move EXE file to RT-target and change the INI to start the EXE when restarting. Then the target restart RT.

  I'm trying to:

  1. download the rtexe on the target in real time
  2. download the file or - rt.ini of the RT target on the local disk
  3. change the RTApp.StartupApplication path to POINT to newly downloaded rtexe
  4. download the ini file edited to target RT
  5 reset
  6. the new rtexe should start to run

  When manually deploy the application of RT through the Project Explorer and manually restart the target RT works very well.

  However if I follow the steps above using the attached VI, to restart it does not start the EXE and loses the connection with the RT.

  When I try to reconnect, he said:

  "Errors were detected in the log of the target when connecting to the target:

  LabVIEW: (Hex 0x63B) target the RT has not enough memory to load the startup application. »

  Now why is there enough memory when the EXE is deployed through the Project Explorer, but not enough when the EXE file is moved manually?

  If there is an easier process or to achieve this goal, please suggest.

  Thank you

  Problem solved.  Problem was never in the INI file.

  Apparently using FTP "FTP Store Multiple.vi" used to move the file EXE to the rt to intimidate target must change the file somehow. Instead I just use the FTP "Put several files.vi" and everything works fine.

• Is there an easy way to group the labview run the engine with an exe file?

  I have a LV exe file I want to run on different computers in our lab test at different times. I know one way to do is to download the runtime engine and instrument drivers I need. My question is can I somehow package the file exe, engine performance and drivers so that they could easily be loaded on any PC with windows 7.

  Thank you.

  In the project window, click with the right button on "Peculiarities of building" and select new > Installer.

• blue screen after Ko 2840149, error - "STOP: c0000218 {Registry hive failure} the registry cannot load the hive (file): \systemroot\system32\config\SOFTWARE.

  After I installed security KB2840149 on a 2008 VM w/exchange server that is running on the machine of Hyper-v server 2008 I'm dead in the water w / E-mail down hard.  The virtual computer is in a reboot cycle bluescreening before I can get anywhere.  Tried the last well known - no effect.  Safe mode - so bluescreens.

  BlueScreen info:
  STOP: c0000218 {Registry hive failure}
  The registry cannot load the hive (file):
  \systemroot\system32\config\SOFTWARE
  or its log or alternation.
  It is damaged, missing, or not accessible in writing
  I saw that it was a patch of replacement for a patch that crashed a lot of PCs.  Since there is no history on this patch, I wanted to check in a see what is the best way to fix this on a virtual machine?

  Being not so deep on VM, I wasn't sure if there was a better way. But I just put the virtual machine to load 2008 iso and then made the standard repair for registry problems off the coast of the article below.

  Of http:

  If the Windows registry is slightly or moderately damaged, you may be able to restart the computer in safe mode and use system restore to restore the registry from the computer to the last known good configuration. However, if the Windows registry is seriously damaged, all types of logon will be prevented. Trying to connect to Windows causes the system fails, then restart. In this case, you will need to boot the system into the recovery instead of Windows Console. Once in the Recovery Console, you can use the Startup Repair tool. Startup Repair tool automates common diagnostic and repair of the installations of Windows tasks starts longer.

  (a) start your Windows Vista or Windows Server 2008 DVD
  (b) on the first Setup screen click Next
  (c) in the lower left corner of the screen, choose "repair your computer".
  (d) on the System Recovery Options screen, select your Windows installation and then click Next
  (e) click on "Command prompt".
  (f) go to X:\sources\recovery > startrep.exe
  (g) this will take some time but will look at any registry related issues.

• I am trying to reset windows xp back to the original settings, but miss me the winnt32.exe file. Where can I go to get the download

  I don't have a winnt32.exe in the i386 folder. My computer behaves very strange sometimes. It drags, freezes and load things on that I do not click.

  You can download SP3 from HERECOMPUTER. Save it to your desktop. Use an extraction of files such as WnRar software to extract the service pack 3 you downloaded to extract the files in the C drive. Once the files have been extracted, click Start > run and paste the command below > click Ok. This should install the recovery console.

  C:\\i386\winnt32.exe cmdcons

  In addition, the i386 folder will contain the winnt32.exe file you requested.

• Liquid USB Express driver file has a setup.exe file!

  Downloaded usb driver files and it isn't a setup.exe file.

  A query of Acer brought the answer:

  "I understand your concern. However, as your query seems to be software related, unfortunately we do not have expertise for software issues because we are technicians of equipment. I ask you to contact Acer on 0906 706 8000 - UK premium support (calls cost € 00.50 per minute). This Department is well-trained in software and skills to solve your query. »

  Seriously!

  They provide incomplete files, then want me to sort load!

  Any ideas?

  If there is usually no setup.exe, you must point Windows to the folder where you extracted the files from the archive (ZIP) that you downloaded, and it will install automatically. Follow these instructions: http://acer--uk.custhelp.com/app/answers/detail/a_id/14352 and you should be fine.