If clause with condition of property element
HelloI'm new to the world of the oracle. I would like to know if we can do something like below in oracle.
We can define if condition in timer in VB as below.
Private Sub Timer1_Timer () - timer with interval 1000
If Text1. BackColor = red then
Text1. BackColor = white
otherwise if Text1. BackColor = white then
Text1. BackColor = Red
end if
End Sub
HW convert this to oracle as it should use the set_property function to change the item property in oracle. hope someone can answer...
Hello
Try the following code in the trigger WHEN-CLOCK-arrival at EXPIRATION .
IF GET_ITEM_PROPERTY('.', BACKGROUND_COLOR) = 'r255g0b0' THEN -- RED
SET_ITEM_PROPERTY('.', BACKGROUND_COLOR, 'r0g255b00'); -- GREEN
ELSE
SET_ITEM_PROPERTY('.', BACKGROUND_COLOR, 'r255G0B0');
END IF;
Kind regards
Manu.
If my response or response from another person was helpful, please mark accordingly
Tags: Oracle Development
Similar Questions
-
When the clause with conditions
Hi all
I have a report that must be filtered according to user input in a field of text and drop-down list.
The goal is to let the user enter either an exact value (based on the AutoComplete feature) or use the wildcard character %
It is where comes the menu drop down. If they choose value1, AutoComplete, the exact value is used and the where clause would look like something below,
If they choose value2, then where should deal with using the same function and % s. something like:select col1, col2, col3 from table where :P1_FILTER in (select distinct col2 from another_table)
How can I take care of this in 1 where clause? I'm kind of stuck trying to figure out.select col1, col2, col3 from table where :P1_FILTER like (select distinct col2 from another_table)
Thanks for any help.
-ChrisTry this:
select col1, col2, col3 from table where ( :P1_FILTER in (select distinct col2 from another_table) AND :P1_LOV =1 ) OR ( :P1_FILTER like (select distinct col2 from another_table) AND :P1_LOV =2 )
I hope this helps!
Sam -
Problem with the Value property node (MacOS)
Insofar that I tested it, the nodes of property Value (and value (signalling)) do not work under MacOS: value property is a Boolean value, the value (signaling) as a cluster (width, height).
Even with the Boolean controls, the node does not work.
Not such a problem in LV 8.6.
Am I missing something? Is that some 'of use' ? Or just a bug?
This looks like some sort of problem of indexing with the nodes property as somesort of corrupted installation. What happens if you just delete the property node and recreate him?
I filed a digital control and looked at the context menu of the list of the nodes property. Below value and value (signs) are Visible (which would be a Boolean value) and Xcontrol, that when you bring through the submenus, the first choice is container bounds, a cluster of Width and Height. If these 2 types of data which are located 2 below in the list match those you found.
What happens if you take another node in property a few elements upwards or downwards in the context menu? Fact is happen for other properties, and if so, are thereany properties who agree?
Here's what look like my property for a digital nodes and I draggged the box up and down to show the natural order of the nodes property. Notice that I have script installed, so there are a few other nodes property (and the blue box at the top) you may not have.
PS. Verify you the signature. Kudos button is now moved to the left since the update of the forum.
-
Query SQL Report with condition (multiple settings) at the point of the apex?
Hi all
I have a small problem and cannot find a solution.
I need to create reports based on a query, SQL or I.R. Nothing hard here.
I need to add the WHERE clause dynamically with javascript to an element of the Apex.
Even once is not very difficult. I set the agenda of the Summit, put my query like this "SELECT * FROM MYTAB WHERE COL1 =: P1_SEARCH" then I call the page by setting the P1_SEARCH value. For example, COL1 is rowid. It works very well.
But here's my problem. Consider that P1_SEARCH contains several ROWID, and I don't know the number of these values,
(no I don't create a large number of items and create a query with so much GOLD!), I would sotheming like "SELECT * FROM MYTAB WHERE ROWID IN (: P1_SEARCH) with something like: ROWID1, ROWID2 in P1_SEARCH."
I also tried: 'ROWID1, ROWID2' and 'ROWID1', 'ROWID2 '.
but I can't get anything else than the mistake of filter. It works with a value, but as soon as there are two values or more, it seems that the Apex is unable to read the string.
How can I do it please?
Thanks for your help.
Maxmnoscars wrote:
But here's my problem. Consider that P1_SEARCH contains several ROWID, and I don't know the number of these values,
(no I don't create a large number of items and create a query with so much GOLD!), I would sotheming like "SELECT * FROM MYTAB WHERE ROWID IN (: P1_SEARCH) with something like: ROWID1, ROWID2 in P1_SEARCH."I also tried: 'ROWID1, ROWID2' and 'ROWID1', 'ROWID2 '.
but I can't get anything else than the mistake of filter. It works with a value, but as soon as there are two values or more, it seems that the Apex is unable to read the string.For a standard report, see + {message identifier: = 9609120} +.
For an IR - and improve safety by avoiding the risk of SQL Injection, use a collection containing the values in a column instead of a CSV list:
{code}
SELECT * FROM MYTAB WHERE ROWID IN (SELECT c001 FROM apex_collections WHERE collection_name = "P1_SEARCH")
{code}
(Please close duplicate threads spawned by your original question.) -
Conversion with conditional text in table
I take the first steps in converting unstructured structure image. A single document is fairly clean except for one question: my structure breaks around conditional text in tables. (The tables have a their own, but the conditional text questions f3ew seems to make the problem worse) I don't know how it should be treated. Structure tags are displayed in the view below.
And here's the view of the Structure:
Is this something that can be implemented with a qualifier, and if so, how? In addition, in the mapping of conversion table, is there any dependency order, as well, on which appears the conditional text element?
Martine
As Michael says, a conversion table does not convert the structure conditions. In a structured document, we apply, removes, shows and hides the conditions in the same way as is done on an informal document. The only difference is that you can select entire items and treat them with conditions.
In a sense, FrameMaker treats conditions like processing instructions. If you need to export a document structured in XML and view it with a browser or a text editor, you can find instructions for treatment that punctuate the beaches of conditional text.
So, once again as Michael, the text says conditional is not breaking your structure. It is superimposed on the structure.
Van
-
Where to write the condition in the design of workflows with conditional step?
HelloAgain, I wish BP and workflow with contitional design stage.
I had designed BP and workflow.
As directed by the user for Udesigner guide, I had added trigger before the condition step.
But I do not understand where to set the Condition to test?
If I need to write the condition in triggering elemt itsel... How to proceed?
for example, I want to write the condition as cost of Tota > = 100000, it must follow a path and if fails to another path.
The conditions of triggers are specified in the workflow settings. After you have created a new configuration, open it and click on the settings tab. You will see a tree structure of the workflow with conditional branches. Click a conditional branch to set the parameters for the trigger for this route condition.
-
Hi all
Is there a possible way to cross the join with condition?
I want something like this:
Table A: custid, accu_id, sum
CustID, accu_id unique =
CustomerID amount accu_id
10 25 400
10 35 447
10 29 420
20 30 510
30 35 472
.
.
.
Table b: accu_id, description
accu_id description
shoes 25
Book 29
30 computer
pen 35
Note: in table A, it is a mismatch of the accu_id values that do not use. Please, take into account this.
I want to see all the columns in the TABLE B for each custid in A. TABLE (something like cross join but with ONE article.) The following query does not work.
Select * from a right join B on A.accu_id = B.accu_id;
10-25
10-29
10-30
10-35
20-25
20-29
20-30
20-35
30 25
30 29
30 30
30-35
What should I do for this?
Thanks in advance
Use partition outer join:
with a (too)
Select double union all 10 custid, accu_id 25, amount 400
Select 10,35,447 from all the double union
Select 10,29,420 from all the double union
Select 20,30,510 from all the double union
Select double 30,35,472
),
b like)
Select accu_id 25, "shoe" description of all the double union
Select 29, 'book' from dual union all
Select 30, 'computer' from dual union all
Select 35, 'pen' from dual
)
Select a.custid,
a.accu_id,
a.amount,
b.
a
by (a.custid) partition
right join
b
On a.accu_id = b.accu_id
order of a.custid,
a.accu_id
/
AMOUNT ACCU_ID CUSTID DESCRIPT
---------- ---------- ---------- --------
10 25 400 shoe
10 29 420 book
10 35 447 pen
10 computer
20 30 510 computer
shoe 20
book 20
20 pen
30 35 472 pen
30 shoe
30 bookAMOUNT ACCU_ID CUSTID DESCRIPT
---------- ---------- ---------- --------
30 computer12 selected lines.
SQL >
SY.
-
I work with a third-party provider that adds agricultural markets that will update every 10 minutes on my site of muse. I'm a designer by trade, and they are the html code. They have problems with my original design elements being pushed around when they add the js include. They recommend at this time that I use another program like Wordpress, but I won't do that, because a large part of the site is designed and just add the markets. Here is the link to the site. At this point, the home page is the question. I can also provide a screen shot of how markets are supposed to look like
This part does not seem too difficult.
I bet they are now trying to "knit" their share of data right in your Muse- generated page, and they tell you that your code is terrible (and their smells like daisies). The usual clash...
But it might be easier for you (and many others) if they offer their content as a separate page of small, so you can incorporate it as an iframe tag in an HTML object in Muse. No matter what code for permission to host the iframe, could be inserted as a simple script in Panel of Options of Page of Muse.
-
I bought 13 elements upgrade, but it would not install XP. Now, I want to install it on my other computer with Windows 8.1 & Elements 7, but I can't find a download site in my account more. What should I do?
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC | XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 10, 11, 12, 13. 9,8,7
- Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Download and installation to Prodesigntools help links are located on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".
-
Reactive layouts: publish multiple Sites with conditional Builds and which connect
I hope that someone can provide a simple solution to publish problems I've had with adapted presentations when you try to publish several sites with conditional builds. Essentially, I want to be able to have an index page that links to one of the two variants of the published sites that I called 'General' and 'specific '. When I click on the 'general' link I want to not open the site which was published with a conditional for all these subjects compilation labeled as 'general' and when I click on the 'link' want it to open the site which was published using a conditional version for 'specific '.
Here are the steps I took to create sites and can't seem to get to bind correctly:
Table of contents, topic Creation and tagging content
- Creates a Table of contents.
- Added 2 topics in the Table of contents. The first topic, I called "general" and the second issue I called, 'specific '.
- I then click with the right button on the "general" and selected subject Tag to build conditional apply. From there, I've created a new tag called "General".
- I repeated this process to create the specific tag, but do a right-click on the 'specific' theme and the creation of a new tag called "specific".
Layouts reactive and edited the sites based on the conditional tags
- Created sensitive presentation using the standard layout and content generated without any conditional builds.
- Duplicated sensitive put in page and gave him the content of 'general' then it is generated using the conditional, "General" version If the finished publication published content has shown that the 'general' subject, as expected.
- I then repeated the same process for the specific content and content using the version parole, generated 'specific '. When over content published showed that the subject marked as 'specific' as expected.
Added an Index page to the table of contents
- Created a new topic to serve as the launch page.
- Added a 'general' hyperlink called for the launch of the general "theme found in the general publishes from the resource manager.
- Added a hyperlink called 'specific' to the launch of the general "theme found in the specific issues from the resource manager.
- I then republish the sensitive standard layout site.
From this point, it gets stuck and won't open properly published Web sites. I don't know why it won't launch hyperlinks correctly. Is there something I'm missing? Let me know if you do not want to see my files. I will be gladly their.
OK, thanks a lot for the capture screen. They help more than you realize.
So here's one of the biggest mistakes I think that you have done so far. You use the resource manager to link to published results. If it is technically possible to do, I'm pretty sure Adobe never planned for it to be used this way.
It may help to think in terms of creation of food products. I have long considered as RoboHelp to be very much like working in my kitchen. All consumables (heading text in the headings, images, HTML pages, etc.) are just as raw ingredients. (Eggs, milk, flour, etc.). The places of storage (hard drive) it's like the pantry and the fridge. And RoboHelp provides facilities to easily combine ingredients to create the different recipes.
This next bit will be somewhat exaggerated, but bear with me. Maybe you have one or more neighbors and all you want to share some common "ingredients". If you set the things where each of you have access to a wine cellar and a shared refrigerator. Maybe you do a Dutch sauce killer. You create it and place in the refrigerator, then your other participants have access through the common "fridge". This is exactly what the resource manager is intended to help.
Now assume that you create something like cookies chocolate chip and you keep in the refrigerator. Well, that's fine, but you don't want to use cookies to chocolate chip already baked in a recipe that might call for cookie dough. But that's what happens when you take an exit and place in a place intended for raw ingredients. And you will see the strange behavior. Prepare for these cookies chemically changes them so that cookies already are significantly different from the dough used to create them. Similarly, you don't want to take one or more output files and reuse in a project source.
So in your case, you run an index file and that fires events to produce the output. All should be well. But when you click on the links to open topics, topics are intended to show up more in the right panel. Think of the picture of how works of image on a TV. The moment that link you to something intended to fill the screen, he is forced into this smaller area on the right. If you end up with what you see in the last picture.
I suggest the following steps.
First, REMOVE your resource manager exits.
REMOVE all links that can point here.
Output records where people will consume copy your projects. (The web server)
Then figure either the parent (.. /.. / somefolder/somefile.htm) path to other systems or the absolute path (http://www.whatever.com) and to link the projects in this way.
Sorry, but without seeing the installation of first hand, it is difficult to say what should be these paths.
I hope this was helpful... Rick
-
Hello
I need to generate a summary table with conditions. Here are the details:
create the table tb_class (classId number (5), studentNum number (5));
create table tb_grade (classId number (5), gradeNum number (5)):
insert into table values tb_class (101, 100);
insert into table values (201, 102) tb_class;
insert into table values (102, 103) tb_class;
insert into table values tb_grade (101, 1);
insert into table values (102, 1) tb_grade;
insert into table values (201, 2) tb_gradfe;
I would like to get the total number of students registed in a specific shade with a SQL, the result is expected as follows:
GradeNum studentNumRegistered studentNumNonRegisted
1 203 102
2 102 203
Is that what you are looking for?
WITH subsum AS (SELECT tb_grade.gradenum, SUM(tb_class.studentnum) AS students FROM tb_class JOIN tb_grade ON tb_grade.classid = tb_class.classid GROUP BY tb_grade.gradenum) SELECT subsum.gradenum, SUM(subsum.students) AS studentnumregistered, SUM(subsum1.students) AS studentnumnonregistered FROM subsum JOIN subsum subsum1 ON subsum1.gradenum != subsum.gradenum GROUP BY subsum.gradenum;
-
How to avoid duplicates on a column with condition
Hi all
I need some advice here. At work, we have an Oracle APEX application that allow the user to add new records with the decision of the increment automatic number based on the year and the group name.
Said that if they add the first record, group name AA, for 2012, they get the decision number AA 1 2013 as their record casein displayed page of the report.
The second record of AA in 2013 will be AA 2 2013.
If we add about 20 records, it will be AA 20 2013.
The first record for 2014 will be AA 1 2014.
However, recently, we get a claim of the user on two files of the same name of group have the same number of the decision.
When I looked in the history table and find that the time gap between 2 record is about 0.1 seconds.
In addition, we have the correspondence table which allows the user admin update the sequence number start with the restraint that it must be greater than the maximum number of the current name of the current year.
This boot sequence number and the name of the group is stored together in a table.
And in some other case, the user can add a decision duplicate for related record number. (this is a new feature)
The current logic of the procedure to add the new record on the application are
_Get max record table with selected group name (decision_number) and the current year.
_INSERT in the folder table the new record came with the decision to number + 1
_ update sequence number of the number of the decision just added.
So instead of utitlising the process of editing the built-in automatic table of the APEX, I write a procedure that combine all three processes.
I have run some loop for continually perform this procedure, and it seems that it can generate autotically new decision unique number with time about 0.1 second difference.
However, when I increase the number of entry to 200 and let two users run 100 each.
If the time gap is about 0.01 second, double decision numbers are displayed.
What can I do to prevent duplicate?
I can't just apply a unique constraint here for three columns with condition because it can be duplicated in some special conditions. I don't know much about the use of lock and its impact.
This is the content of my procedure
create or replace
PROCEDURE add_new_case)
-ID just use the trigger
p_case_title IN varchar2,
p_year IN varchar2,
p_group_name IN VARCHAR2,
-decisionnumber here
p_case_file_number IN VARCHAR2,
-active
p_user in VARCHAR2
)
AS
NUMBER default_value;
caseCount NUMBER;
seqNumber NUMBER;
previousDecisionNumber NUMBER;
BEGIN
-execution immediate q '[alter session set nls_date_format = "dd/mm/yyyy"]';
SELECT count (*)
IN caseCount
OF CASE_RECORD
WHERE GROUP_ABBR = p_group_name
AND to_number (to_char (create_date, "yyyy")) = to_number (to_char (date_utils.get_current_date, "yyyy"));
SELECT max (decision_number)
IN previousDecisionNumber
OF CASE_RECORD
WHERE GROUP_ABBR = p_group_name
AND to_number (to_char (create_date, "yyyy")) = to_number (to_char (date_utils.get_current_date, "yyyy"));
IF p_group_name IS NULL
THEN seqNumber: = 0;
ON THE OTHER
SELECT Seq_number INTO seqNumber FROM GROUP_LOOKUP WHERE ABBREVIATION = p_group_name;
END IF;
IF caseCount > 0 THEN
default_value: largest = (seqNumber, previousdecisionnumber) + 1;
ON THE OTHER
default_value: = 1;
END IF;
INSERT INTO CASE_RECORD (case_title, decision_year, GROUP_ABBR, decision_number, case_file_number, active_yn, created_by, create_date)
VALUES (p_case_title, p_year, p_group_name, default_value, p_case_file_number, 'Y', p_user, sysdate);
-Need to update the sequence here also
UPDATE GROUP_LOOKUP
SET SEQ_NUMBER = default_value
WHERE the ABBREVIATION = p_group_name;
COMMIT;
EXCEPTION
WHILE OTHERS THEN
Logger.Error (p_message_text = > SQLERRM)
, p_message_code = > SQLCODE
, p_stack_trace = > dbms_utility.format_error_backtrace
);
LIFT;
END;
Many thanks in advance,
Ann
It's easier to solve for the case, while p_group_name is not null. In this case, you update a GROUP_LOOKUP line, so that you can select to update this line at the beginning, to prevent cases of two for the same group added at the same time. To do this, change the selection of GROUP_LOOKUP to:
SELECT Seq_number INTO seqNumber FROM GROUP_LOOKUP WHERE ABBREVIATION = p_group_name for an updated VERSION OF the SEQ_NUMBER;
and move this to be the first thing that did the procedure - before it has CASE_RECORD lines.
In the case when p_group_name is set to null, you have some object to be locked. I think the best you can do is to lock the entire table GROUP_LOOKUP:
the table lock in exclusive mode GROUP_LOOKUP wait 100;
The '100 expectation' means that he will wait until 100 seconds before giving up and trigger an error. in practice, that is expected to only wait a moment.
Exclusive mode allows others to read, but not to update the table.
UPDATES and the LOCK of the TABLE will be updates of other sessions wait for this transaction to validate. Queries from other sessions are not affected.
The locks are released when you commit or roll back.
-
XMLTable to extract columns with conditional path does not
Hello
I am on 11.2.0.3 and I need to extract columns on a section of XML with conditions on, but I get "ORA-00907: lack the right parenthesis", so I think that the way I go about it is not supported or that I have somehow the wrong syntax or something.
This is a very simplified what I'm trying to do (there could be several different entries in the < sets1 > and < sets2 > sections and they might be in different orders, is not as if I can always choose the first or the last):
with sample_data as (select 1 id, xmltype('<root> <sets1> <set1><set_name>name1</set_name><set_val>val1</set_val></set1> <set1><set_name>name2</set_name><set_val>val2</set_val></set1> </sets1> <sets2> <set2><set_name>name3</set_name><set_val>val3</set_val></set2> <set2><set_name>name4</set_name><set_val>val4</set_val></set2> </sets2> </root>') xml_doc from dual) select * from sample_data sd, xmltable('<root>' passing sd.xml_doc columns col1 varchar2(10) path 'sets1/set1[set_name=''name1'']/set_val', col2 varchar2(10) path 'sets1/set1[set_name=''name2'']/set_val', col3 varchar2(10) path 'sets2/set2[set_name=''name4'']/set_val') x;
What I'm trying to get:
COL1 COL2 COL3 ---- ---- ---- val1 val2 val4
I know that I could separate the < set1 > and < set2 > nodes in their own xmltypes xmltable on it and then join them and make the necessary pivoting, etc., but when I try to start that against only 1000 lines, db do not love and ended my session! Therefore, I'm looking for a more elegant way to do it.
Is there a way to do this in a XMLTABLE? Pointers are very welcome!
It solves your problem of sample request and you get the output that show you.
with sample_data as (select 1 id, xmltype('
name1 val1 name2 val2 name3 val3 name4 val4 As you can see, I've marked the lines that I've changed. The error you saw came to use two single quotes in the COLUMN XPath instead to use double quotes. Then I changed the XPath expression in the XMLTable brackets as well.
I'm confused on what the columns you really want overall, in terms of how you know which values you want, or did you mean that you want something random sets1 and sets2.
You store the XML file in a column of XMLType SECUREFILE BINARY, right? It seems that you made previous visits, but just double check.
-
ORA-00907: lack the right parenthesis when using Group by clause with xmlagg
I have the following query and I am getting ORA-00907 error when I use the clause with the xmlagg function group.
If I remove the clause xmlagg and the group by clause, the query works well and not give me the result.select xmlelement("Mitigation", xmlelement("m_szMethodName",tm.DisplayName), xmlelement("SubstanceInterferenceProtocolList", (select xmlagg(xmlelement("MitigationProtocol", xmlelement("m_szMethodName",tm.DisplayName), xmlelement("m_szInterferenceProtocolName",tmp.protocol_name), xmlelement("m_szInterferenceSubstance",tmp.intf_mtrl_prod_code), xmlelement("m_ProtocolParameters", xmlelement("m_szProtocolName",tmp.protocol_name), xmlelement("m_Consumables", xmlelement("Consumable", xmlelement("m_szConsumId", xrl.rgnt_pack_name), xmlelement("m_szProductCode",xrl.pack_prod_code), xmlelement("m_nVolume",tmp.fluid_vol), xmlelement("m_szProtocolStep",xps.protocol_step_name))), xmlelement("m_ProtParamList", xmlagg( xmlelement("ParameterValues", xmlelement("m_szProtocolName",tmp.protocol_name), xmlelement("m_Time",xpsd.parameter_ntime_value)) group by tmp.ccd_test_id,tmp.intf_mtrl_prod_code) ))) order by tmp.ccd_test_id, tmp.intf_mtrl_prod_code, xps.protocol_step_intprotocolstep ) from XPR_tdef_mitigation_protocol tmp, xp_reagentlist xrl, xpr_protocol_settings xps, xpr_protocol_settings_default xpsd where tmp.ccd_test_id = tm.ccd_test_id and tmp.ccd_test_id = xrl.ccd_test_id and tmp.pack_prod_code = xrl.pack_prod_code and tmp.intf_type = 1 and xps.protocol_name = xpsd.protocol_name and xps.protocol_step_name = xpsd.protocol_step_name and xps.ps_action_parameterlist = xpsd.ps_action_parameterlist and xps.protocol_name = tmp.PROTOCOL_NAME ))) from XPtoXPRTdef_defn_mapping tm where tm.DisplayName = 'SYPH'
But in this code XML, the output format is incorrect for my application.
Could someone help out here?Now my problem is that this unique coating is more than 32767 characters and utl_file can write 32767 bytes per line.
Someone deal with this?Serialize the output as CLOB and DBMS_XSLPROCESSOR.clob2file procedure used to write to a file:
DECLARE xml_output CLOB; BEGIN SELECT XMLElement("Department", XMLAgg( XMLElement("Employee",e.job_id||' '||e.last_name) ORDER BY e.last_name ) ).getClobVal() AS "Dept_list" INTO xml_output FROM hr.employees e WHERE e.department_id = 30 OR e.department_id = 40; DBMS_XSLPROCESSOR.clob2file(xml_output, 'XML_DIR', 'test.xml'); END; /
-
Calculation of the sum with condition
Hello
I start with BI publisher, and I want to take a NAP with condition.
My report output XLS, I haves columns, named ACCOUNT_TYPE and TREE_NODE and MOENTARY_AMOUNT_03 that are my PS query fields
I want to sum only when a condition is true.
<? xdofx:If ACCOUNT_TYPE = 'R' AND TREE_NOD = 'TEST' then
Sum (MONETARY_AMOUNT_03)
end if? >
This does not,
could you help me?
thaks!You should do this:
Maybe you are looking for
-
I just downloaded and installed Thunderbird on a new computer Windows 8. I get the message in the title when I press the Get Mail button
-
HelloI use a VI and a USB-6211 to read in a txt file and this file as an analog waveform of voltage output and at the same time send a meter synchronized with this analog waveform. At the start of the VI, I have several errors: First of all :-200077o
-
Why my printer keep things that I have printed in the past, when I print something again. It prints the new and old
-
Change the permissions of file on the mass in Windows 7
I have about 500 files in a directory that I want to delete but I get a warning "you need permission to administrators to make changes to this file. To remove a single folder, I need to click with the right button on the file/properties/security/edit
-
How can I make McAfee allow inbound connections?
Hi I have a minecraft server and I use a program called LogMeInHamachi to allow my cousin to connect to my server. But McAfee is blocking him fall signal to it. I did a test where I have already sent a computer LAN to another world but this computer