hp photosmart 5510 e printer

Similar Questions

• Photosmart 5510 not printing and noises when toggled or asked to print?

  About 6 months ago, we purchased our printer HP Photosmart 5510 alongside our Touchsmart computer, and so far, both work fine.

  However, there are a few weeks at random, when I sent a document to print, the printer started making a very loud noise, sounding almost as if he was that something stuck in the back there. Only to make the noise stop, I cancelled the printing and has turned off, which again triggers intense noise. This back on once again, he made the same noise and, before moving on to the usual display a notice on the monitor of printer flashed by saying that the device had extinguished itself incorrectly.

  It lasts for a few weeks now, and after having scoured your Web site for all the details, I couldn't find anything on this issue. After detecting that other factors may have come into it, I watched some of your videos on how to fix etc. paper jams. After pulling some paper in the back, I thought the culprit of all this, the message on the monitor said he had a 'ink cartridge problem' or could not detect the paper, even if we just replaced the ink and I have to reload the paper. I watched the videos of these two problems troubleshooting and tried 20 seconds thing etc, but nothing worked.

  Really, I'm so frustrated and I would like a little help from a very kind person out there?

  

  Hey mollycat,

  It seems that there is a problem with the power of the printer mechanism paper.  If the unit was loud noises, then it might be a part out of alignment or a piece of paper caught in the unit.  However, you mentioned the continuation of the measures is stuck, remove the paper, and now the printer gives error ink system.

  I will provide documentation of troubleshooting below for the two issues, but if these steps don't erase the question then I would advise to contact HP Technical Support on this printer.  Is it is only 6 months old, then it would still be under warranty by the original manufacturer.

  An "Out of paper" message on the control panel and the all-in-one doesn't pick up paper

  An alphanumeric Code (example: ' 0 x 'r' C2...) ") or 'Ink system failure' Error Message is displayed on the front panel when printing

  To contact HP Technical Support: contact HP worldwide | HP

  Hope this helps,

  Jason

• Photosmart 5510 - cannot print with black just in

  I have a Photosmart HP 5510 e-All-in-one printer - B111a. I am running Mac OSX 10.8.5, running a Macbook pro mid 2012 15 inches. I am able to run Windows 8, but have not tried. I threw the magenta, cyan and yellow. I bought a new black toner cartridge. My printer does not print unless I have the magena, cyan and yellow installed. Is it possible to spend it?

  No, the cartridges must be present.  In addition, if the printer is allowed to sit for a long time with the cartridges removed the "plumbing" may become permanently blocked.

• Photosmart 5510: HP5510 prints less than 1/2 page black

  About 1/2 at the bottom of the page, the black ink seems to run-out. He continues in blue or red, but then runs

  Altogether.  It is the way that I expect to act if the cartridge vent was clogged, but they look clean.

  I tried the "Clean printhead" option in the Panel, and it usually prints the page test OK. But then, when I try to print a page of text, I get bad results.

  The cartridges were purchased at HP online September 29, 2014. They were opened just a couple of days

  I also tried a hard reset 30 after.

  For what it's worth, I also bought 3 color cartridges at the same time, but have not yet installed the.

  Okay, I think I solved the problem. I cut 1/2 on the label covering the squiggles of event and I noticed there is a blockage of the adhesive used to hold the label. You can see on the top of the second wiggle from the left.

  After removing the part of such label shown above, I was able to print an entire page of text that previously, I was unable to. I hope this helps some other users with this problem.

• Model Photosmart 5510, stopped printing regular apps.

  Connected to e-print center, which shows that the documents are pending.  How to print?   I saw the regular settings and everything seems to be in order.  How to solve the problem.  (The selected application is Universal Crossword)

  jlm1122,

  It seems that these jobs are stuck in the queue.

  I might try a reboot network and see if cela them gets the impression for you.

  The first thing you want to do is to unplug the power cord at the back of your router.

  Then do the same with your printer, either from the wall or the back of the printer.

  Wait 30 seconds and reconnect the router. Wait another 30 seconds and reconnect the printer.

  If the jobs do not print after that the printer starts up, then you want to cancel the jobs 'pending' in ePrintCenter and perform these same steps again.

  If you are still having problems with this after these steps, let me know and we can try something else.

• Printing with the photosmart 5510 and MAC 10.7.2 is a dream? and I don't even go to part scanning

  Wauw, buy a photosmart HP 5510 printer and you are very busy for Christmas together to print wireless?

  Unpack your photosmart 5510 and install?

  Well, it prints 1 page and then you get the message printer isn't ready if you want to print your next page.

  1st day, I try with my own knowledge.

  
  

  Updates

  Reset the router.

  Work with difficult IP put in the printer.

  Change the IP address via the Web interface.

  Change the settings of the router

  Try to reinstall the software which is not even possible that most all do the manual says that it is.

  Still 1 print and then nothing. Reset the printer or change the IP in the difficulty of the printer, labour, still 1 print or scan or 1 airprint but then nothing.

  (printed about 35 pages of BS as test)

  Day no. 2, new day of new towers

  Looking around the God thank you forum I'm not the only one who has this problem.

  A lot of people, same problem, some struggle for 6 months, contact support without success.

  Damm scan I even was going to this party and look at all the users having problems. Allow me to first impression please.

  And right now, it looks resolved advice and try to do the same. No results at all.

  Day still no 2, but I can't download now...

  Come on guys read it all, it seems that you are lucky, when it works. You must be a programmer if it works.

  My main question is;

  -Is this or Steve Job knew this?  This product is in its Apple store, HP uses the Apple logo.

  -Sell HP t - he produced cheap now and get the money back to test everything print and use the cartridges?

  -Are there hope or solution let this work smooth with what the box and ads tell?

  -J' just forgot a small no and someone give me the solution?

  -In a lot of wine in these days of Christmas?

  Hope someone can help me and get this Photosmart 5510 working (printing, scanning and airprinting it says on the box)

  Hi ShiomiL,

  A tried these last few months, a lot of time to get the HP works as it should work (especially the airprinting and scan) without any success.  We used with IP printing/scanning, which wasn't a problem, but does not give us the full possibility of the HP printer.

  Today I bought an apple Extreme airport, connect and a few seconds later all works perfect

  In the end, so it was the TL-WR741N (the latter replaced by apple airport) that give problems.

  I just wanted you to know and say thank you for the support you give.

• hp photosmart 5510 series: photosmart hp 5510 series files are not found

  Hello

  I use the Hp Photosmart 5510 series printer and is faced with a problem where I can not scan from the printer to the laptop. Before having this problem, I used to scan from the printer wireless without any problems, but after I changed my Internet brand and speed, the printer keeps saying "to ensure that the printer software is installed on your computer and this 'scan to computer' is activated via the printer software" even if I have already connected the printer again internet. I have the printer software on my laptop, but it does not work. When I try to click on scan of the computer, the computer used to say "files series hp photosmart 5510 are not found". I tried to change the IP address, but that didn't work either. So I don't know what to do now. Also, I tried to use the USB cable and it worked, who showed me on the printer, I can scan wirelessly or via USB. When I tried with the USB key attached to the laptop, wireless the wireless worked (as well as the USB port), but when I took off the USB cable, it did not work. Help, please

  Note:-J' formatted the laptop and operating system went from vista (original) to the Ultimate, which helped to improve the performance of the laptop. -What is has everything about the problem?

  Welcome to the HP community @Blizzerd,

  I wanted to answer your question to have the printer connect and work on your network wireless 'new '. I think that if you uninstall the printer and reinstall the printer software and continue through to set up the printer on your network, it should work for you.

  Here are the steps for you.

  1 uninstall the printer software, and then restart your PC.

  2. click on this link, select Windows 7 and follow all the steps to install and reconnect the printer: HP Photosmart 5510 and 7510 printers - setting upwards to a wireless network

  Test print and scan and let me know what happens! I hope that does the trick

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• Photosmart 5510 - scanning problem; Impossible to establish a session / unable to connect to the computer

  Photosmart 5510 was printing and scan OK, but now can not sweep.  Printing is OK.  Have reinstalled the drivers, reinstalled the software, rebooted Mac and printer.  Operating system OS X 10.6.8.  Received error message when reinstalling software "com.hp.dmf.DeviceConfiguration.ErrorDomain error-2002", but did not cause of reinstallation of software to fail.

  Have you tried everything I can think of... any suggestions?

  I did all that, but he also discovered that my macbook has a manually assigned IP address outside the DHCP range, router, so the printer/scanner perhaps could not see it on the network.  One or the other or both solved the problem... Thank you!

• HP photosmart 5510 won't print black

  I have a photosmart 5510 which do not print black. All other colors are OK. Have changed cartridge and went through all the steps on the site of diagnosis without success.

  I really need to turn it on. Any ideas gratefully received.

  See you soon.

  Here is a link that can help you with this problem. It can a be a print head.
  http://goo.GL/OTmPV

• How can I get my page back to my hp photosmart printers HP Printer Wizard 5510?

  How can I return my page Wizard HP printer for all-in-one printer, HP Photosmart 5510?  I used to have, but now all I get is a page that has only three choices: see what's printing, set the preferences and customize your printer.  I need the Printer Wizard page that has one of the following options: ePrint Setup, customize your printer, see what's printing, maintain your printer, set preferences, scan a Document or picture, manage scan to printer and printer Home Page.  Can you get it someone please let me know how I can return the Printer Wizard page?  Thank you, in advance!

  Connie7007

  Hi Connie,

  The simplest solution would be to reinstall the software of full functionality for the printer.

  The last phase of installation should fix your printer wizard.

  General instructions to install the printer software

  • Open downloads & drivers HP
  • Enter your printer model information
  • Select your printer in the list of the 'results '.

  OR

  • Open HP Photosmart 5510 e-All-in-One Printer - support B111a
  • Enter your operating system from the menu drop-down
  • Click NEXT and scroll down
  • Find the category driver - software product installation
  • Select the base driver, e-print, or a full features software
  • Save the *.exe installation package (s) on your computer

  The files will probably save in the "folder"downloads. "

  Next:

  • If it is available, you can download print and scan doctor and / or other programs of the category-utilities

  TIP:

  Install the utilities / tools first. bit installation packages are smaller in size

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  ·         On the bottom half of the main Web page for your printer, you can find some helpful videos to help with the installation of the printer software!

  ·         Scroll down the list of videos back until you find the video that best fits your situation.

  • If you use a USB connection: download and install the driver software before connecting a USB cable.
  • Ethernet: If the printer supports Ethernet, you can connect the printer to the network (and assign the printer an IP address for the router, if you wish).  Once the printer is connected to the network, make sure that the printer is turned on, and then install the printer software.
  • Once the initial installation is complete and functional, don't forget to check and install the relevant updates - check the category - updated

  There is valuable information about the Web site, including manuals, pages, solving problems, and SOLUTIONS to problems, How-to's and alerts for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• Photosmart 5510: Out of warranty 5510 won't print black

  My Photosmart 5510 off-warranty will not be printed in black and color blocks on the test page are weak and upholstered.  I have responded to customer cleaning tips with no improvement.  Not enough messages about the problem detail advise to proceed.  What to do next?

  Greetings @HLDLC,

• HP Photosmart 5510 'Printer offline' show

  To the right,.
  
  I started having a problem with my HP Photosmart 5510 - running on a Mac OS x 10.6.8 computer wirelessy.
  
  Until yesterday, I was able to print wireless towards her, even when he was asleep he wakes up and print.
  
  Now, however, I get a "Printer offline" message whenever I try to print what he's awake or not and I have to turn on the printer and on again before it prints.
  
  My printer HP utility can see the printer and it is connected to my network.
  
  Any help would be appreciated,
  Thank you
  Ronan

  I found this on the Apache site:

  "You unexpectedly see an Apache HTTP Server installation page when you visit a Web site. If you sent us mail because you have seen a page saying "it worked!" (or something similar indicating that Apache has been installed) on your screen or a Web site you have visited, please go back and READ the page. It must also specify what happens. The page is the equivalent of a demo or the Readme file from a Windows installation of the application; It is intended for the person who has installed the software and is supposed to show that the installation has been completed successfully. The problem you are experiencing has nothing to do with us, and we cannot help you. You must contact the webmaster of the site. If the site is www.foo.com, for example, try to send mail to . If it is www.toddsbeer.org, send an email to . And so on. »

  I think that there is something funny, with (probably your DNS of ISP) your router's DNS settings.  You can enter the configuration of the router and change the google DNS or OpenDNS DNS?

• This issue is still pending. My PhotoSmart 5510 continues to go offline during the generation of printed documents.

  I have a PhotoSmart 5510 and a Toshiba i7 Quad 4 laptop running Windows7 with a Trendnet Wireless router.

  My PhotoSmart 5510 disconnects when printing is generated.    All systems are go: online wirelessly connected wireless, does not not offline, set as the default printer, checkmark, etc..  Sometimes it will make an impression and disconnect and sometimes it will disconnect the first time and will not be printed.

  If I run the diagnostic utility I can usually get it online.  But the said diagnostic utility it is disconnected and the problem is not "resolved".

  It also has a problem with the USB.  If I've set up as a USB printer will crash the entire operating system and laptop computer will not restart unless the USB is disconnected or if the printer is turned off.  This does not happen with my laptop computer on the same Lexmark printer.

  obewan,

  This article should help to keep the Wi - Fi connection (including things like setting a static IP address for your printer to avoid the crash between you OS/router/printer):
  http://support.HP.com/us-en/document/c02817031

  Give the steps described a try and tell us if it helps.

  Good luck!

• Photosmart HP 5510 series: printer for wireless connection software installation CD

  Hi all

  I need help or advice about the case of the CD of my printer for the configuration of the wireless connection, which is HP photosmart 5510 series. I bought a new laptop, Hp Pavilion Gaming Notebook, which is 10 windows, and when I arrived to set up the configuration of the software printer on my laptop I discovered that it is only compatible for windows XP, Vista and 7, but not 10. I bought this printer about 5-7 years ago and I need to install its software on my computer for fast printing and scanning. So, my question is; "" Of where to install the software?" GOLD " What do I do about the Conference on disarmament, should I go for the customer service and ask for the latest CD or what?'.»» Need help ASAP please!

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/identify?q=HP+Photosmart+5510+series&tool=s-002#Z7_3054ICK0K8UDA0AQC11TA930O2

  Please select your printer and win 10 OS before you download and install the FULL features software.

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Hope that helps.

• Photosmart 5510 - wireless Mac - printer offline

  Hi there, I am trying to print from a Mac again photosmart 5510, wireless is connected, tested printing via an ipad - runs like a dream.  Unable to print message error "printer is off-line" laptop (Mac 10.7.2), the printer is not connected.  Printed with a cable but I can't via wifi. Have checked all troubleshooting tips, no luck.  advice is appreciated

  Download and install this: http://support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.