If I have "Everyone" grant access to an external hard drive, which means that everyone connected to my network?

Similar Questions

• How can I access my Iomega external hard drive? When I plug it in it shows under COMPUTER.

  How can I access my Iomega external hard drive?  When I plug it into my USB port it shows on your DESKTOP.  I try to back up files on my external hard drive, but I can't get even the external hard drive on my computer.  Thanks for help.

  Hi Larryxcvb,

  1. what happens when you try to access the driver? You receive messages or error codes?

  2. other USB devices (USB key, etc.) recognized and works very well without any problem?

  3 is not detected the external hard disk on other computers?

  You can check the following link and try to run the Fixit of material.

  Hardware devices not detected or does not

  You can also visit the following iomega support article and see if it helps.

  What should I do if my Iomega USB hard drive is not assigned a drive letter or is not detected in Windows 7, Vista or XP?

  Hope this information is useful.

• I'm trying to restore access to my external hard drive.

  I'm trying to restore access to my external hard drive. I want to support.

  

  Encryption key is not the kay of recovery?

  Sorry, I'm not an expert on encryption. Here are a few options:

  • Check out this link.
  • Start a new post with a descriptive subject line (for example "how to decipher... »). Be sure to include the name of the used encryption tool.

  Since I essentially answered your original question I would that mark you my answer as "response" to this topic.

• Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG.  The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the

  Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG.  The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the computer.  In the process of my Lightroom program and catalog related to these images have been lost.  When I re-associate these photos with my new installation of Lightroom and a new catalogue is there a way to retrieve the keywords or other changes or metadata catalogue Mountaga?  Is any of this information embedded with the imge DNG file or was it only in the cataloght lost on my failing hard drive? I re-import just as if it were new images with no prior treatment of Lightroom?

  By default, LR saves all changes in the catalog, and that applies to any type of file.

  Optionally, you can save changes to the file as well, for raw files owners, this will create a xmp file - for DNG that changes are going to be cooked in the file, without additional xmp file.

  But it does not default. Go to the catalog and parameters under the control of metadata automatically save changes to XMP.

  Unless you do this, the changes are saved only in the catalog.

  Hope this makes things clearer.

• I use a PC and I used LR3. I'm a newcomer to LR, so patient with me! My problem is related to the import function. I have a photo library on an external hard drive. I slowly imported previews of the photos selected from the library in

  I use a PC and I used LR3. I'm a newcomer to LR, so patient with me! My problem is related to the import function.

  I have a photo library on an external hard drive. I've slowly been import previews of the photos selected from the library in my catalog, adding them during the import process - well. But now, I hit a problem. Another folder in my library contains several subfolders, each containing a number of photos (a mixture of RAW steals (naves) and jpg). I was importing found in my catalog each Subfile in turn, using the Add function, usually of the jpgs only from each Subfile. It works fine, until I reached a particular Subfile. For some reason when I try to import from it and select the secondary file as a Source, only the RAW (NEF) images appear in the preview pane (sorry, forgot the correct term for it!). I know that jpg files are in this auxiliary file on the external hard drive, because when I view its content in Windows, they are all there. But try as I can (choose the file under source, select the folder parent as a source, try to copy or move them, instead of adding them), nothing seems to work. Since they do not appear in the preview pane, I can't import them. It does appear that this a Subfile where the problem exists, but I don't see anything that is different from the others (names of files under all use the same structure - yyyy-mm-dd_custom name, and pictures in all subfolders are adopting the same denomination structure too - yyyy-mm-dd_sequential number_custom name.) NAVE/JPG. So what I am doing wrong? Any ideas please.

  It is possible that the images in this particular subfolder were taken in your camera in RAW + JPEG.  If so, you will need to go to preferences under the general tab and make sure the box "processing JPEG files files next to raw as separate photos" is checked.

  

  However, assuming that this is the case, there is really no reason to import the JPEG file if you already have the RAW file.

• Clean install of windows 7, now I have no permission to copy on external hard drive.

  I have a HP media center 2005 office which originally had XP on it. I bought an upgrade Windows 7 years and installed and never had a problem. Two weeks ago I reformatted my computer to get rid of a redirect virus, and everything seems to work perfectly except for one thing: my C: drive and both of my external hard drives, K:, and M: require administrator privileges to copy/paste/modify anything.
  When I did a clean install it automatically gives me an admin account.

  My question is, what can I do to change the permissions and security settings, while I have a total control over EVERYTHING. I recently tried video file on my external drive and he told me that I needed permissions and click ok to try. But he did nothing.

  I want access to all of my files. Drive C and the two external. I noticed that the security options when I consult my files or directories where showing these accounts:

  SYSTEM
  Josh (Josh-PC\Josh)
  Administrators (Josh-PC\Administrators)
  Everyone

  and I was getting a SID that is long enough

  There are a lot of files, but one in particular that made me on this hunting witch was changing my user profile file in Firefox. I did a clean install and wanted to change the shortcut menu in firefox, but also a few other settings.
  This just happened to reside in C:/documents and settings /

  The recipe is the same as before: take ownership of the problem folder. It make recursive so that you don't need to treat each case separately.

• No access to an external hard drive

  So I plugged my external hard drive in my macbook to move some files on it but it says "the disk you inserted is not readable by this computer." I clicked on initialize and he said: the hard drive is uninitalised and Mont and partition are grayed out. I ran the option of first aid, but he only said: the operation completed successfully. I am aware of that my external hard drive works because it is blue is lit and I used it a few days ago and it worked fine. I also plugged into another usb key I have and it works perfectly.

  Is there anyway for me to access my files on the external hard drive? I really don't want to lose my photos and files!

  The external hard drive is a tough drive 320 freecom.

  the light means power can get to the case, not the drive past any integrity checking. If the drive is older it may break or it could have been failure, or requires 3rd party software to allow full access, if it is NTFS formatted for windows and you use it on a mac.

  If you do not backup your data may be missing. If you start the boot disk process, you have already started to remove the files and more you try using that drive less whatever it is (if any) can be recovered.

  Freecom offers guarantees of 3 years on their mechanical hard drives but offers no guarantee with recovery of lost data (no company only)

  http://www.Freecom.com/warranty

  If your player is longer than 3 years its not rare that its failure and should be replaced with a new unit.

  In the meantime, you can try a 3rd party solution such as Disk Warrior or rescue for Mac to see if something can be saved, but still no service company forensic or data will always claim that they can do it with any degree of certainty to recover your data.

• How to: access files on external hard drive

  Original title: external hard drive

  I have connected my external hard drive "My Book Essential" and my computer it recognized and has an icon under drivers and printers, but I can't find a way to open or to acess the files on it

  Hello

  1. what operating system do you use?
  2. were you able to access this external drive without any problem earlier?
  3. have you made changes on the computer before this problem?
  4. what exactly happens when you try to access this drive? If you receive an error message then, send the same return.

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
  Suggestions for a question on the help forums
  http://support.Microsoft.com/kb/555375

  The following article might be useful:
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Access to an external hard drive in XP

  I have an external hard drive that was working well until a few days ago. When I recently tried to access, the drive was visible in 'My Computer'. However, when I double-clicked to open it, I got a message saying "insert disk". I tried on Windows 7, which produced similar results, as well as on a Mac, which does not recognize.

  I wonder if the external hard disk enclosure must be replaced. Although it comes on when turned on, I hear not a running engine as I did in the past.

  Try to run, type: diskmgmt.msc

  ' In msc, L.click hard disk, go to actions, all, select 'make active "".

  close when thru. If its already set to this, try to connect to another

  port, xp will reinstall it on reboot.

• Access denied on external hard drive.

  I have an external drive, which works perfectly well. But I've just updated from vista to W7, and now I can not access the disk from that specific computer. I get access denied. On the properties, all users have full access. And the funny part is on my other computer, with the exact same OS, the drive works perfectly. So, I expect that there is a setting that I didn't know.
  Is there someone with good ideas on how to solve this problem?

  Hi I tried your instructions below to restore all my administrator permissions full on my external hard drive.

  1. click on Start , click all programs , and click Accessories .
  2. right click on command prompt , and then click run as administrator .
  3. in administrator: command prompt window.
  4. type
  takeown /F (external drive letter) and press ENTER.
  5 type
  CACLS (external drive letter) /G Administrator: F and press enter

  After that I followed these steps, my computer Windows 7 says that the drive is not accessible.  I plugged it to my old XP computer, and it also says "access denied."  I have a huge amount of important files there and I need to restore access, but I can't find an answer for how to cancel the steps I followed.  Please tell me how to reverse the steps I did your earlier suggestion.

• Cannot access files on external hard drive connected to Windows XP to Windows 7

  Original title: to access the shared files on an external drive using Win7

  I have created a shared folder on an external drive attached to my WinXP Home addition.  When I try to accIess to the shared folder on Win7 I see the folder but cannot access the files.  Yet when I create a shared folder on my XP I correctly read files.  Why can't access the shared folder on my external hard drive on my network

  Hello

  Do you get any error messages?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Error message when you try to access a network Windows XP computer: "you might not have permission to use this network resource".

  http://support.Microsoft.com/kb/913628

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/

  How to back up and restore the registry in Windows

  Method 2:

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  In addition, we can see:

  Windows 7 & HomeGroup: share with other Windows XP and Windows Vista operating systems

  
  

  http://www.Microsoft.com/download/en/details.aspx?ID=17168

  Hope this helps and keep us informed if you need help.

• Access to an external hard drive

  Hi, I hope someone can help me understand this cause I'm running out of things to check.  I'm under Fusion Version 3.1.1 on a Macbook Pro with OS X Version 10.6.4.  I have a computer virtual running Windows XP PRO SP2 Build 2600.  I'm trying to connect a USB hard drive (Western Digital My Book Mirror Edition) external on the virtual computer.  When I connect the external hard drive, the virtual machine is able to recognize the drive as a USB device and connects to him.  I am able to go through the file structure and to read the data in the virtual machine.  But when I try to write to the disk of the virtual machine, all I get is a message "error copying file or folder.  The window basically says "cannot copy XYZ: access denied."  Make sure that the disk is not full or write protected and that the file is not currently in use. "I made sure all the files I'm trying to copy are not open.  I also checked the write to the target folder permissions and it seems to be in writing.  The hard drive is formatted in NTFS and there are hundreds of GB free.  Thanks for your time!

  What you describe resembles Windows ownership / permission settings do not allow to write.  Did you check the ownership / permissions for the root of the drive down to the folder that you want to write? Is your current user explicitly listed on the Security tab, or at least a group of your username is a member with Scripture, or all permissions?

  I don't think it of a matter of the merger itself, seems to be more a question of windows.

• Reinstalled Vista access denied on external hard drive

  I reinstalled Vista and now I can't access my external hard drive.  I tried to do a right click on the drive and to allow access for all users on the Security tab with no luck.  Help, please

  Please see how appropriating a file or a folder in Windows XP , which also applies to Windows Vista and Windows 7. Boulder computer Maven
  Most Microsoft Valuable Professional

• "not granted write access" - saving to external hard drive

  I've spent hours tonight trying to find a solution to the issue of not being able to save photoshop files in an external HD.

  I use CS6, working on a mid-2010 pro macbook, trying to rescue a Samsung HD.

  Countless discussions of this issue, but he ends up saving a server, or fine thread pending discussions.

  So is there a solution or not? I can't believe that nobody has found a solution over the 4 years +, that this issue has been around!

  Thank you

  Hi winther,

  It seems that you don't have the appropriate permissions for the folder on the external drive.

  Please give permission to read & write in the destination folder.

  ~ UL

• Cannot access information on external hard drive in Garland

  I have two FireWire G-drive hard daisy chained and connected to my iMac. I am able to access the information for once, but after a while I can't access information from it anymore.

  For libraries of Final Cut Pro, it will say "Final Cut Pro cannot save the changes to the library."

  For iPhoto libraries, he will say it is "Impossible to write in the"[name of library]"library." Check that you are allowed to write to the directory of the library.

  When you try to move anything in the Finder, it will say "the operation cannot be completed because an unexpected error occurred (error code-50).

  So the temporary solution that worked so far is to stop the iMac, disconnect both drives, start the computer, and then connect again. This will cause growth to work again, but only for a time very short before send me mistakes once again.

  How can I fix?

  Thank you

  I hope you both of these backup discs because they failed to comply and when they do, you may lose all your data. Don't do anything until you know that the data is safe. Have you run disk utility to try to repair the disks?