If I use a recovery disk I lose my documents

My computer hangs at startup. I tried running it on safe mode, but it crashes before it loads. I even tried recovery advanced to the last known good configuration and it crashed just after the windows open. My battery life is low, even though I am connected power supply. I removed the battery several times because of start-up problems. I have removed the battery and use only the power supply and still have the same problem.

I have a Toshiba for Windows Vista recovery disk, if I use it I still keep my documents. I do not have a backup and I can't back up now.

Hello

Using the Toshiba Recovery disk normally wipes the hard clean everything, including your data.

Here are the methods that you can try to recover your data.

Remove the hard drive > put in a USB hard drive case > plug it into another computer > try to read the data in this way.

And there's this way > download Knoppix > make a bootdisk with it > boot from it (as long as your hardware is OK > it will try to read information on your hard drive.)

http://Knoppix.NET/

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

It is a way to try to repair your existing installation:

Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

Here is the guide to repair Options using a Vista DVD from Microsoft.

If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

Unfortunately, you have to buy it.

Here is a link to it:

http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

See you soon.

Tags: Windows

Similar Questions

  • HP Pavilion p6290d: change to smaller capacity desktop hard drive using the recovery disks

    Currently my hard drive (750 GB) is having a problem. I have a spare hard drive (500 GB), I can replace the 750Go with the 500 GB hard drive using the recovery disks that I created when I got the pc?

    Hello:

    All I can say is that you have nothing to lose to give a try.

    500 GB could be sufficient to allow the recovery discs, you did to work.

  • Re: How to get Corel WinDVD without using the recovery disk?

    The update for Corel WinDVD was rather messy and because of this some owners laptop uninstalled to try to install the new software. Now, we ended up with the only possibility of an image recovery, which, in practice, means losing the software.

    Updates for the Bluetooth and wifi are also pretty messy.
    Is isn´t possible to get this software back without using the recovery disk?

    As you probably know recovery image installed on Toshiba laptops is a kind of software that includes the operating system, drivers, tools specific to Toshiba and utilities but also some additional software like antivirus or DVD player application.

    All drivers and Toshiba tools and utilities are available on the Toshiba download page, and if you want to install the version of the OS, you can download each of them.
    This additional software is not available for download. It's a kind of gift on the owner of the laptop because as the new owner, your machine must be ready to employment with full protection and opportunities to use multimedia content.

    If you don't like it, you can remove the system and use your own applications.

    Summary: this software cannot be downloaded separately and if you want to have it again, you must install original image of recovery designed for your machine.

    If you have any other questions do not hesitate to ask.

  • Question aboput using the recovery disk

    If I use the recovery disk, it will remove the Toshiba assist installed on my pc? I don't have the tools and disk utilities.

    Thank you

    Using the recovery disc disc HARD integer will be erased but it is applied to factory as from the date of purchase. This means that everything will be installed again (all drivers, tools, and utilities).

    The laptop will be as good as new. And of course Toshiba Assist is part of the recovery image and it will be there again.

    Good bye

  • How do you reinstall to factory settings using the recovery disk

    Hi, I created the set of recovery disks. Can you please guide me how to reinstall to factory settings using the recovery disk.
    Thank you

    Put the first disc in the CD/DVD drive.
    Turn on the device, press F12, choose ODD as device boot and boot from the CD/DVD drive containing the recovery disc.
    Follow the instructions on the screen.

  • How to recover files before using the recovery disk?

    Hello

    I have a Toshiba Equium and when I turn it on it loads the screen where you log does not appear, it has a black screen with a mouse, and I need to use the recovery disk to get back to normal, but I don't want to format the hard drive that I have a lot of files so it is anyway to recover the files?

    Hello

    In my opinion the easiest way is you remove the laptop HARD drive and put it in a box external HARD disk. Then, you can connect this external HARD disk to a different computer now and have access to the files on your HARD drive and you can perform a backup.

    An alternative you can boot from a Linux Live CD and back up your files on a different USB devices.

  • Satellite A300-1mz I use the recovery disks after an upgrade of the HARD drive?

    I'm upgrading the disk hard of my * toshiba a300-1mz *, but I am sure that I can use the * recovery disks * marked the first boots to the l.o. (vista)

    I expect your support...
    Thank you very much...

    Hello

    Yes, you can do it!
    If the HARD drive has been recognized by the BIOS, then you should boot from the recovery disk Toshiba in order to reinstall the operating system which has been pre-installed by Toshiba.

    Welcome them

  • Failed to retrieve the Satellite Pro L300 laptop using Toshiba Recovery Disk

    I have a Satellite Pro L300 Vista I'm trying recover using the recovery disk Toshiba official that the machine is not able to retrieve from the hard drive.

    The process gets as much as to start recovery utility and asking to select the language in the utility recovery which I emphasize English and then select next; It moves on the next screen, which is empty and then it just hangs.

    Any suggestions?

    You bought your laptop with the Vista version English?
    What language is marked before selecting English?

  • Satellite M300 - how to use the recovery disk

    Hello world

    I was wondering how to use the 2 recovery discs that I burned recently if I wanted to fix my USB ports (as seen in my Toshiba M300 - wire to USB ports)

    Any suggestions?

    Hello

    You can use the only recovery disk to reinstall the whole OS!
    This means that the use of the recovery disk will format the whole HARD drive and will set the laptop back to factory settings!

    If you want to use the recovery disk and then insert it into the ODD and the start-up of this disc.
    Then the installation of the OS should move forward and you should follow the instructions on the screen.

    All that s

  • Satellite U300 - how to use the recovery disk?

    I inserted the recovery disc 1 and then restarted my computer, but nothing happened.
    I really need to fix my cause cell it's time to review!

    Does anyone know how to use the recovery disk or affecting function press when the laptop starts to use the programmed recovery?

    Thank you!

    Hello!

    If you have inserted the recovery disc you must only start her everything that s!

    I m not sure but I think you can go into the advanced boot menu if you press F12. Alternative change you the boot priority in the BIOS. You can access BIOS by pressing F2.

    Good bye

  • Satellite A210 - cannot use the recovery disk - error 20-DATA-048F

    I'm going to use the cause of recovery partition does not work my windows, and whenever I do it, it comes up with an error "20-DATA-048F.

    How can I fix my computer!

    Any help would be greatly appreciated.

    Have you tried to format the HARD disk until you try to use the recovery disk?
    Sometimes, I read in the forum that this may solve the problems with the recovery disk and so you can take the Windows XP disc or another tool that is able to format the drive.

    But after that, you have the Toshiba recovery disc. You are not able to use the HARD drive recovery feature.

  • Satellite L350 won't start or recover using the recovery disks

    My L350 suffered a hard disk problem and wouldn't start. He attempted an ASR, but failed. I rebooted after the system recovery cd that I created when the laptop was bought first, but the recovery fails in image 5.

    Does anyone have advice?

    Have you used these recovery disks in the past?
    If the drives are OK I can imagine there is a problem with the HARD drive but I m not 100% sure about this.

  • Desktop HP pavilion s5-1540: using the recovery disk

    I have the recovery disc I made when I got this pc.

    Now, I need to use.  I started the pc with the disc, but nothing happened.

    Can I get advice on how to use the recovery disk?

    Note.  I'm not very computer savy.

    I sent my pc in for repair to a place of repair no HP (insurance).  They have installed a generic operating system but there is no program file.  I want my pc as it was when I got it.

    I can't get these disks to run.

    any help is much ajppreciated.

    Insert the recovery disk 1 in the drive, restart the PC, when you see the HP logo screen start to type F9 on the keyboard, this should load the Boot Manager, and then highlight (using up/down keys) internal CD-ROM drive cd/dvd and press ENTER, it will now boot from the recovery disc 1 and we hope to start the restore process.

    It is a long process not to disturb the tactile keys or pc, while he recovers, it will reboot several times on his own, you know when it is done when it asks you to set up the pc for first time use.

    Make sure that the recovery discs are clean before you start.

  • Cannot install SP3 as it crashes even after recovering the computer by using a recovery disk

    I recently had an accident requiring that I reboot using my restore disk that were made when I first came to this computer. Since the restart, I can't access the updates from Microsoft Updates program. No error message, tells me that I can not connect. After several attempts, I think that the problem lies in the validation of the Windows program I use. I tried manually to run the validation program and to download security patches I've saved previous accidents. I show that SP2 is underway. I have a standalone download SP3, that when I upload in the system, crashes and burns. Back to the same thing, restart using the recovery disk. I realize for XP ends next month and its time to upgrade. But I would like to have this machine in working condition to use for other tasks.

    Original title: update XP

    You are a candidate for this patch before installing SP3...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&DLC=en&softwareitem=PV-60484-2

    .. you are if your PC is a HP Pavilion and Presario, Media Center and has an AMD processor.

    To find out if you have an AMD processor...

    • Hold down the Windows (between Ctrl and Alt) key and press Pause break
    • Your processor type is shown in the computer: section (see below)

    You can do a restore of the system in safe mode to get rid of the SP3...

    http://support.Microsoft.com/kb/306084/en-GB

    .. .or do another cover.

    Tricky

  • I would like to recover my computer by using the recovery disks that I created. There is NO OPTION!

    I have a ' aspir ' 5750-6414

    I got a bad virus, but I did create recovery disk (4 or them)

    I would like to recover my computer by using the recovery IMAGE.

    The bootable disc, but it does not give me the option to use MY recovery disks. It gives only factury default of restore options.

    I tried to restore my computer to the image I created when the computer was new that had a lot of my program, including ms word for hour.

    Can anyone help?

    Thank you. That's why presence. The person who set up my computer a few years ago gave me these discs and I assumed it was a picture. My mistake.

Maybe you are looking for

  • Satellite A200 - 18 M - HD - DVD player faulty

    Hello One of my clients bought a laptop Toshiba Satellite A200 - 18 M. The HD-DVD player, works very well, but now is not ready any CD / dvd, including e Toshiba recovery DVD. The drive has become defective. How do I get this repaired / replaced? The

  • ATML 5.0 support

    Is there a plugin of data for ATML 5.0 DIAdem?  TestStand 2012 now generates ATML 5.0 default reports. I am aware of the ATML 2.0 data plugin, but I would like to take ATML 5.0.

  • ENVY27: Failed to create a system recovery

    My HP SW support prompted me to create a system recovery (after 10 months with the computer). I am trying to create a recovery on USB, but the accident of process in the creation of CD. CD Creator crashed in the files of the copy phase.

  • Web OS blackBerry Smartphones new 4.5 browser error

    Since upgrading my 8830 to the 4.5 new OS, when you try to connect to Wells Fargo and other financial websites, I get a message that the site does more support the latest version of the web browser. How can this be corrected? Is there a third brower

  • I get a few faxes fine, but others will say "Cannot be received because of an unexpected error."

    The call will respond by fax and then say 'cannot be received due to an error unexpectedly.' with an x inside a red circle.  Other faxes come in fine.  And sometimes a fax didn't come out and have the message "the remote fax machine was taking too lo