If I use the master password to access the sites, all my passwords are encrypted?

Similar Questions

• I'm using firefox 5.0 & I use a master password. Whenever I open firefox, it asks the password. It happened not in previous versions. Is there a way to stop popping up everytime, rather than turn off the password

  I'm using firefox 5.0 & I use a master password. Whenever I open firefox, it asks the password. It didn't happen in the previous versions of firefox. I don't want to disable my master password. Is there a way to stop what is happening each time? Is this a bug in the new version.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• I used a master password for years. Today, I noticed that it had been authorized. What could cause this?

  I used a master password for years. I also use Sync. Today, I wanted to watch one of my saved passwords. When I went to do this, I noticed that Firefox was no longer is configured to use a master password. I'm afraid I can have been hacked, or that something is is past (recent update Firefox?) which caused the use of the master password will be disabled.

  I have not yet checked my other computers synced to see if their master password has been disabled.

  I have re-enabled the functionality of password on this computer.

  On this particular computer, I had a long-standing issue date where Firefox ' help > about Firefox "still says I need to"restart to update. This means that I can't use "help > about Firefox ' to check and install the latest version. I need to download Firefox manually and update by running the installation program.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.

  You can also remove active - update.xml, or even updates.xml (this will clear the update history).

  • http://KB.mozillazine.org/Updates_reported_when_running_newest_version
  • http://KB.mozillazine.org/Software_Update (Update works not properly)

  C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
  (%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
  

  C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
  

• I dropped my phone from a height accidentally and now its completely broken and destroyed I can't access anything and all my photos are on it and the battery decreases very quickly please how to unlock my password without touching my screen its broken

  I dropped my iPhone 4S height accidentally and now its completely broken and destroyed I can't access anything and all my photos are on it and the battery decreases very quickly please how to unlock my password without touching my screen its broken and I can't touch I have all my studies on this subject two years ago and I still need the documents please someone help Please I need my pictures and documents

  Hello

  You must make an appointment at apple store in for breach of warranty replacement.

  You pay part of the cost of using iCloud upward when you configure new iphone.

  Even apple ID.

  See you soon

  Brian

• How someone is using the site Adobe Stock?

  When the Dollar Photo Club was bought by Adobe, customers had to migrate / do change.  Dollar Club Photo stock site was easy to use.  I don't know how to use the site of Adobe Stock.  I have 50 + purchased credits and a monthly plan, but are not yet able to upload a single image.  There's no place to get help, no one to ask questions.  It is not a user-friendly site of stock.

  [moved from the living room forum to specific forum - mod]

  Hi, Rosemary,

  I apologize for the inconvenience.

  Please see Stock FAQ: How can I learn Adobe Stock?

  I hope that helps!

  Kind regards

  Sheena

• Use the same script in different areas?

  Is it possible to use the same script in different areas?

  I had several scripts that will validate and modify the entries in the user on different areas. Since they do exactly the same thing, is it not possible to just get out the 'real' on a field script and refer to other fields to this script?

  Of course - we have a fragment of 'commonScriptObjects.xdp' that we all have

  our common methods of javascript in.  Then we add to the form and hide it.

  then use the following reference to point to the script object:

  GET A HANDLE TO THE SCRIPT OBJECT

  var commonScript =

  xfa.resolveNode ("commonScriptObjectsFrag.fragmentScript");

  CALL A JAVASCRIPT METHOD IN THE SCRIPT OBJECT

  commonScript.setupSearch ();

  Here's something else you can do to validate our mandatory fields.  We spend in

  the real to validate field and the name of the field as a text string:

  If (! commonScript.validateRequired (mainContentSubform.customerName,)

  False return 'Customer'));

  and the validateRequired method, which is in our commonScriptObject xdp

  file, looks like this:

  validate required fields

  function validateRequired (oField, fieldName) {}

  Console.println ("enter validateRequired");

  var commonScript =

  xfa.resolveNode ("commonScriptObjectsFrag.fragmentScript");

  If (commonScript.isNullValue (oField.rawValue))

  {

  xfa.host.messageBox ("Please fill out the '" + fieldName +)

  ("' field.", "Error", 3);

  xfa.host.setFocus (oField);

  Returns false;

  }

  Returns true;

  }

  Hope that helps,

  Elaine

  ocen12 [email protected]>

  29/07/2009 09:26

  Please respond to the

  [email protected]

  TO

  Amal [email protected]Schmitz >

  CC

  Object

  Use the same script in different areas?

  Is it possible to use the same script in different areas?

  I had several scripts that will validate and modify the entries in the user on

  different areas. Since they all do exactly the same thing, is not

  possible to just get out the 'real' on a field script and refer to the

  other areas of this script?

• Passwords are encrypted

  (1) are encrypted passwords when being saved in Firefox?
  (2) for the selection master password existing passwords are encrypted or just those registered after activation?

  All passwords that are stored in a profile are encrypted in the local when profile a master password.
  If a site uses encryption, then connecting to a site the password is encrypted. (https)

• The function of master password automatically enter other sites usernames and passwords when you access these sites, or that they are always manually?

  Master password enter usernames and passwords automatically, or should the user still manually enter this info?

  Yes, after you set a master password, you will be asked to enter when Firefox needs to access your stored passwords. It will "unlock" the usernames and passwords you have saved and Firefox will automatically added automatically in for you when you navigate from site to site.

  When you are finished using the web, you can exit Firefox to "lock" your usernames and passwords.

• I enter username and password to connect to a Web site, use the site, and then logoff. When I opened the site again, the username and password are alread filled in,

  The only way to prevent that I found so far is to close Firefox. When I opened to the top, go to the website, the user name and password are empty. It didn't happen with previous versions of Firefox.

  You can set the Boolean signon.autofillForms false pref on the topic: config page.

  • http://KB.mozillazine.org/signon.autofillForms
  • http://KB.mozillazine.org/about:config

  This can also be caused by cookies that are not removed correctly when you disconnected.

• Routing between sites that use the site to site VPN

  I'm running 7.2 (1) two 515 who have a VPN site-to-site set up a bit as follows:

  subnets of the main site - router main site - PIX1___Public IP's___PIX2 - remote site

  The main site router: CAT6506 with engine SUP1A

  Subnets listed in motor SUP:

  SUB1 VLAN

  IP address 180.x.1.x.255.254.0

  VLAN SUB2

  IP address 180.x.2.x.255.254.0

  VLAN SUB3

  IP address 180.x.3.x.255.254.0

  VLAN SUB4

  IP address 180.x.4.x.255.255.240

  PIX1 is the subnet SUB4 (180.20.4.2)

  Remote site subnet: 192.168.1.0/24

  Route the engine by default Overtime toward another router that reached the internet via another public IP subnet.

  Any host on SUB4 can reach any host on the remote site as long as the SUB4 host default gateway is the inside int PIX1 (180.20.4.2).

  No matter what SUB4 host that uses the 180.20.4.1 address (router) default gateway cannot communicate with a remote host, but can communicate with any host from any subnet of the main site.

  All remote hosts can communicate with any host on SUB4, regardless of the gateway of the SUB4 host address.

  All remote hosts can communicate with the router on SUB4 main site, but can not reach one of the other interfaces subnet configured on the router.

  I've added a static route on the SUP engine:

  router IP 192.168.1.0 255.255.255.0 180.20.4.2

  That did not help.

  The uses of motor SUP EIGRP to learn other subnets main site reached through routers, so I added the remote subnet to that:

  Router eigrp 10

  redistribute static

  network 180.20.0.0

  network 192.168.1.0

  No Auto-resume

  No log-neighbor-changes to eigrp

  No chance, no more.

  I can't help thinking that I'm missing something very basic.

  Any help is really appreciated

  Hello

  PLS, find the changes that must be made and checked.

  PIX remotely:

  1. you only need a default route and that you can route your subnets via inside as they are outside, so remove these statements

  2.i see Access-group configured to be applied to the external interface for traffic coming from the outside, make sure that all required subnets are allowed.

  3. in the access list for the corresponding traffic to cryptomap, I see that one included subnet, pls have all included traffic that must be encrypted (as sub1, sub2..)

  Main PIX:

  1. in the access list for the corresponding traffic to cryptomap, I see that one included subnet, pls have all included traffic that must be encrypted (as sub1, sub2..)

  2. is there an 'access-group outside_access_in' access list present in the pix the corresponding traffic - check - the pls

  3. by nat (inside) 0 access-list inside_nat0_outbound, include all your inside subnets that must have access to the remote subnet

  L3 switch:

  1.I see a default route pointing to your router 3640, so pls add a static route to your remote subnet pointing to Pix

  IP route 192.168.1.0 255.255.255.0 x.x.22.2

  2. pls check in your L3 switch, wheter the appropriate subnets sub1, sub2 are learned properly via the conifugred Eigrp VLAN respective

  for example .sub2 and sub3 learning with leap following 8.2, sub 5 via 30.3

  Pls try to understand the topology and make configuration changes and let us know the results

  concerning

  k VB

• How to use the Site FrontPage Import Wizard (Macromedia/Adobe)

  I would like to import a FrontPage Web site in Dreamweaver 5.5.

  I put a lot of work in the PS web design and hate having to re-create in Dreamweaver (also, I'm a newbie to DW!). The site of the FP is not published and exists only on the hard drive of my computer.

  I read an ad on the FP Site from Macromedia Import Wizard. It was posted a year ago by Catherine Munro (http://forums.adobe.com/community/dreamweaver/dreamweaver_general?view=overview), who was using DW 5 - import FrontPage 2000 (also my version of FP). She had no problem.

  But when I download and install the FP Site Wizard, it does exactly as it should until it gets to the last step #8 in Help file Assistant (file:///C:/Documents%20and%20Settings/Owner/Application%20Data/Adobe/Dreamweaver%20CS5.5 en_US/Configuration/ExtensionsHelp/Macromedia/FPMigrationKit/fpmigrationkit02.html):

  7	Click OK to leave Dreamweaver and restart the application.
  8	Choose Site > open Site and select any FrontPage of the site from the submenu.

  Once the DW restarts, when I click on the Site, there no option to open the Site (in gray or other) and I can't find any site FP has been imported into DW. I went through the process several times, but no luck at all.

  Can anyone help?

  Thank you very much!

  None of you don't think that what follows is worth trying: open each page prepared with FP in, for example, Firefox, and then save each full page under "Web Page." Open each of these pages in DW, and then start making the necessary changes?

  You don't need this extra step.  PS and DW are HTML editors.  If you edit an HTML page in the public Service, you can change it in DW.   The only difference is that DW does not support FP exclusive gadgets.

  Open DW.  Access to websites > Manage Site > new.  Say DW where your FP site files are located on your hard drive.

  Example: C: / / yoursite /.

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

• Cannot download plug in for windows media player. Have used the site to download and it says it worked, but the plug-in does not appear on my list of plug-ins.

  I tried to hear an appeal of a Web conference. Received a message, necessary plug windows media. Check my plug ins, no windows media. Reading about firefox support tutorial. Clicked on download. Had a window that requires repair or change. Tried to fix it and then change. Need better guidance on how to finish download. Download the message passed, but after firefox closing and re-opening, no still no plug-in for windows media in the list of plug-ins. Go to site and could not hear Conference.
  Reading support forum. Message while using about: config. Tried, typed in on: config in Start menu, but do not see anything that looked like I could change for real like message said.
  solved by opening internet explore and go to the website and listen to the conference call on windows media player. There was a message saying: If you want to enable media player click here. Not so heard Conference.
  Tried using chrome. You have to listen to the Conference yesterday. Today, he had the same message you need to plug in when I tried to follow the instructions in connect, it was just as confusing and useless like firefox. Most is that I tried to make any statement in the suggestions forum for firefox and can not get the windown media connect to appear in my list of plug-ins and can not hear calls for conference on firefox.
  Chrome said that they worked on connect available to the chrome store.
  I agree with the comments that I was able to go to web sites and to hear the calls before firefox did an update that removed my windows media plug. The fix simple download, two from windows, does not, apparently because firefox cannot find the fix. This isn't for lack of user, and it seems that windows attempted to provide a fix, and firefox does not recognize.
  Bottom line, it is easier to use another browser, that trying to get windows connect multimedia player installed on firefox. What is a browser, if you can not hear an appeal on the Web site the browser will take you to? Please make it easy install windows media branch on firefox. Thank you..

  If you get the screen to change/repair, it means that the Setup program has detected that you have already installed the plugin.

  Do you not see the file here:

  C:\Program Files (x86)\Mozilla Firefox\Plugins
  

  Its file name is: np - mswmp.dll

  If the file is missing, I suggest to delete and then reinstall the plugin.

  Edit: By removing and then reinstalling I mean using the delete button under the modification and repair buttons in the Setup program, and then run Setup to reinstall.

  For your questions, you can either (1) open the your profile page (drop-down menu of your username along the edge very top of the page) or (2) open the "sort and filter" section the questions above and click on the link 'My Contributions' (https://support.mozilla.org/en-US/questions?filter=my-contributions).

• Pavilion g6-2306el: life of the battery and using the laptop all day

  Hello

  I tend to use the laptop for work almost all day. If this is the case, she recommends simply detach the battery, instead of always keep at full load (since it has plugged all the time)? Thank you.

  Modern laptop PC battery is smart. You don't do any damage in the battery while the laptop is running on current alternative. To some people say otherwise and there may be a very slight advantage in terms of reduction of charge cycles that are saved on the battery by deleting, but for me, the hassle of constantly take the battery now outweighs the very small gains.

• How to send by fax the laptop using the network all-in-one printer

  I have an all in one printer with network connections in my office, how can I send faxes from my laptop

  Your all-in-one printer supports this feature?  Check its manual to see if it does.  Just because it is connected to the network and contains a fax equipment does not necessarily mean you can send a document to him and use the fax to send to someone else.

  'Surace' wrote in the new message: * e-mail address is removed from the privacy... *

  I have an all in one printer with network connections in my office, how can I send faxes from my laptop

• Detail.html BC Open Platform WebApp file do not use the site template

  My WebApp I created using the open platform BC does not render the file detail.html correctly on the front-end server that he refuses to use the my site page template.

  The side admin of things work perfectly.

  On the front side, my page that makes the "catalogue" fine works and uses the page template, however, when I click on one points (which opens the detail.html) file the result makes all {tag_} entries on the page but it has no model of all.

  The full path to the file I want to talk to is/layout/WebApps/< my web application > detail.html

  I checked that the "Web App Options menu" put the 'Default Template' correctly to my site template, but it does not seem to use it.

  What I am doing wrong?

  I found the answer.

  I forgot to add the attribute template on webapp point itself.

  I add to the app Web, but not WebApp points.