If Windows Movie Maker video publishing gets crushed half size

Similar Questions

• Windows Movie Maker cannot publish the movie to the specified location

  From: patiotaiza

  Message: I have a 5-minute project and trying to publish it on my PC I get the following message:

  "Windows Movie Maker cannot publish the movie to the specified location. Verify that the original source files used in your movie are still available, that the publishing location is still available, that there is enough available disk space, and then try again. »

  I have enough space available in my PC (8 GB on the left), search for the missing files and they are all OK, tried several different locations, editing... and it still doesn't work. I'm sad, can someone help me please?

  Thank you!

  De : John Inzer

  You may have some incompatibility issues with your source files. Take a look at the following articles:

  Movie Maker 2 - problem solving - "cannot record a movie.

  http://tinyurl.com/yjvztz

  or

  http://www.Papajohn.org/mm2-issues-CantSaveMovie.html

  Type of file with Movie Maker compatibility

  http://tinyurl.com/v8tee

  or...

  http://www.myvideoproblems.com/tutorials/MovieMaker/File_type_compatibility.htm

  What file type should I use in Movie Maker?

  http://tinyurl.com/6n66g3

  or...

  http://www.myvideoproblems.com/tutorials/MovieMaker/WhichFileTypeInMovieMaker.htm

  John Inzer

  MS Digital Media MVP

  View

  This isn't a technical support

  I'm a volunteer

  Solutions that work for

  me I work for you

  Proceed at your own risk

  Another response of the community of Windows Vista discussion groups

• Adding several Photos by overlay to a Windows Movie Maker video

  Hello

  I'm working on a film project.  I followed Litton_B

  Tips on how to add several layers of photo for a

  Windows Movie Maker video Live while keeping

  the sound of music. (The pictures with the words of the songs)

  I've been able to add photos and remove the video

  portion as I went along, as he instructed.  I then save it.

  He looked and sounded a lot. However, every time that

  I'll be back in Windows Movie Maker Live to work on

  my project, the audio (music) part of this portion of overlay

  my video is silent.  I tried this three times and I

  the same result.  Do you have any suggestions?  My email

  the address is * address email is removed from the privacy *.

  Thank you.

  M rich

  I have

  Try windows media encoder 9 series, its utilities always run microsoft downloads, but is not the encoder.

  Use a search engine web for her, once running, the encoder can convert audio and video, more recording.

  Use the microsoft update to download catalog.

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=Windows%20media%20encoder

  In addition, movie maker is to v2.6

  In addition, look for these kb927544 KB2117917-french kb929182 updates

• Problems with Windows Movie Maker: video/Audio, cut and cutting

  I recently did some videos, but there was this thing really annoying happening in the middle of the video. Okay, let's say I put together all the clips in Windows Movie Maker for my taste, and it's how I wanted it to be. I saw it and then suddenly in the middle of the video the sound shuts down or freezes the clip or it will just empty. I have not been able to solve and so I can't do more videos without him just hide or cut.

  Please help, I need to make a video for a deadline but nothing I try suddenly freezes or cuts in a specific clip. How is what is happening and what can I do to stop it. I've accidentally done something or it just freezes.

  Thanks, I need all the help I can get!

  I use Windows Vista. And this has only been produced recently, that my previous videos have been very well.

  Well well... once again, without success. The same thing happens, it freezes in the middle of the clip. I get the FLV file by orbit actually, but I don't know who is a hoarder of corrupted file. What should I do?

  ==============================================
  Don't know what to tell you... apparently the original .flv video clip is damaged.

  The following free download includes a utility to convert .flv, but to this
  point that I am not convinced that you will have success.

  Pazera Video converters Suite 1.2
  http://www.Pazera-software.com/products/vcsuite/
  (click on the blue Download button not the Red)

  FWIW... the name of the file that you download is:
  Experience of digital media of John Inzer - MS - MVP - 'Pazera_Video_Converters_Suite.zip '.

• Windows Movie maker can publish no film because of "missing" files

  When I publish the movie says he can't because the files are missing. Howere there are no files with the Red X that would indicate a file is missing. All files seem to be taken into account. Any suggestions on how to find the file Windows Movie Maker believes Miss? \

  It's very frustrating, as is the level of «support "of Microsoft.»

  When I publish the movie says he can't because the files are missing. Howere there are no files with the Red X that would indicate a file is missing. All files seem to be taken into account. Any suggestions on how to find the file Windows Movie Maker believes Miss? \

  It's very frustrating, as is the level of «support "of Microsoft.»

  =============================
  This problem could be related to the source of the files that
  are not fully compatible with Movie Maker. And
  This could indicate that the project is too large and
  complex.

  Might be worth trying to convert your source
  before you import into .wmv format video
  Movie Maker.

  If you want to try the conversion... What follows
  Freeware can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  all the boxes on the last screen)

  The following article deals with a similar problem
  with the previous version of Movie maker 2.

  Movie Maker 2 - problem solving-
  "Can't save a movie."
  http://www.Papajohn.org/mm2-issues-CantSaveMovie.html

• I am trying to create a movie with Windows Movie Maker to publish on Youtube.

  When I publish the movie with the .wmv extension, the film is only about half the screen upper and the lower half is green.  When I choose the .avi format, the file is too large to upload to Youtube(508MB). What should I do?  Thank you.

  The info... copied on the net... may be worth a visit:

  =====

  The Green problem bar setting in Windows Movie Maker
  http://www.bernzilla.com/item.php?id=884

  When I tried to follow the directions, I was unable to find XVid on my
  computer.  So I googled XVid and then (I think) the 2nd entrance to
  Download XVid.  After I downloaded it, I could follow the directions
  bernzilla and when I published a video - Voila! no green bar!

  After thick film Green line is published
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=105025

  =====

  Just a thought... but if you can publish to the .avi format
  with success... then, you can try convert from .avi to the
  .wmv format.

  There are to many converters available on the net...
  the following links are some examples.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (6) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

• Windows Movie Maker-video editing is displayed with a green hue down

  AFTER SAVE AND VIEW THE EDITED VIDEO, THE VIDEO SHOWS TWO IMAGES. WE TOP THE FILM AND THE LOWER PRESENT A GREEN TINT.
  Why is that every time I have save a file film and after that I edited, the film that I saved is displayed is divided into 2.   It happens every time when I run the edited wmv. The upper part is the movie edited and on the background a green tint. I have urged all the features that make it like that. (I'm using Windows Vista) Help, please.

  Why is that every time I have save a file film and after that I edited, the film that I saved is displayed is divided into 2.   It happens every time when I run the edited wmv. The upper part is the movie edited and on the background a green tint. I have urged all the features that make it like that. (I'm using Windows Vista) Help, please.

  =========================================
  No guarantee, but it might be interesting to try to publish your
  project in DV - AVI format to a folder on your hard drive and
  then import the file .avi in DVD Maker to create a DVD.

  (The following items should help explain how to save under)
  DV - AVI)

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista-
  Quality profiles / editions
  http://www.Papajohn.org/Vista-publishing.html

  And... the info... copied on the net... may be useful:

  =====

  The Green problem bar setting in Windows Movie Maker
  http://www.bernzilla.com/item.php?id=884

  When I tried to follow the directions, I was unable to find XVid on my
  computer.  So I googled XVid and then (I think) the 2nd entrance to
  Download XVid.  After I downloaded it, I could follow the directions
  bernzilla and when I published a video - Voila! no green bar!

  After thick film Green line is published
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=105025

  =====

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• In windows movie maker, failed to get the narration and music to play at the same time

  Hello
  I have followed the instructions to the T, but cannot get the narration and music to play at the same time.

  Hi Anataia,

  You are unable to play the music and narration at the same time, you can adjust the audio levels to determine which audio will play louder than the other in your movie.

  The audio settings by default in Windows Movie Maker is for the audio portion of imported video and any narration or music that you add to play at an equal level, but you can change that setting if it does not give you the balance that you want. To adjust the audio levels, follow these steps:

  1. Click on Tools, then the Audio levels.
  2. Do one of the following:
     • To increase the level of audio on the Audio track that is part of a video clip, drag the slider toward Audio from video.
     • To increase the level of audio that is located on the audio / music, drag the slider to Audio / Music.
  3. Click close.

  http://Windows.Microsoft.com/en-us/Windows-Vista/adjusting-audio-in-Windows-Movie-Maker-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-narration-to-your-movie

  Hope this has been helpful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to import an avi windows movie maker video

  I have a Nikon Coolpix L22 and it supports .avi files, and when I tried to import it into windows movie maker, it wouldn't support it

  It may be worth trying to convert the .wmv file
  format before you import into Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Windows Movie Maker problems Publishing a half green screen

  Everytime I try to publish a movie from Windows Movie Maker finshed product comes out with the bottom half of the greenery of the photo and only half scrambled upward.  Very frustrated.  Tried with MP3 music and not at all.  Nothing helps.

  I have no idea what a codec is and had to install Xvid.  But it worked great and was very very easy!  Thank you!  Happy Days!
  Corinne

  ================================
  You are welcome.

  Thanks for the update.

  John Inzer - MS - MVP - digital media experience

• black flashes appear on the outside in finite windows movie maker video

  All of a sudden when I save my movies in windows movie maker... I keep seeing these black flashes to playback. I've used these same clips and not had any problems so I don't think this is the clip. What is the problem?

  I did the 2 just system restore thing give it a shot, and it worked. now, I got 14 windows updates waitng 2b installed on my computer and I fear 2 install them because perhaps in the fact that there was something that screwed it all upwards. is there a way 4 me 2 find out what as the updates r b4, I install them just in case?

• When my Windows movie maker video loading, it will load only 11 seconds of a video of 5 minutes.

  I'm doing a video.  The video is Mpeg-2.  It's a little more than 5 minutes.  I tried several times to load the video but whenever he played only 11 seconds.  Whenever I play the video through windows media player, it will play the entire video.  Help, please!

  I'm doing a video.  The video is Mpeg-2.  It's a little more than 5 minutes.  I tried several times to load the video but whenever he played only 11 seconds.  Whenever I play the video through windows media player, it will play the entire video.  Help, please!

  ==================================
  Movie Maker has problems of compatibility with the MPEG files...
  It may be interesting to try to convert the file to the. WMV
  format before you import into Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker ceases to meet impossible to publish the movie

  Windows Movie Maker stop - impossible to publish the movie

  Windows Movie Maker gel

  I can't publish my movie in windows movie maker - fully he gets to 76% and never completely complete edition (I tried several times, but continues to be the same thing). Everything that happens, is the estimated time for the film to be finished being published continues to increase, but nothing ever happens to the status. I think it has something to do with when I [Preview] play a movie in windows movie maker that I have edited, to halfway through the movie, the movie freezes and won't play any more, although I have yet to play clips. Can anyone has any ideas on how I fix? Thanks ():

  I can't publish my movie in windows movie maker - fully he gets to 76% and never completely complete edition (I tried several times, but continues to be the same thing). Everything that happens, is the estimated time for the film to be finished being published continues to increase, but nothing ever happens to the status. I think it has something to do with when I [Preview] play a movie in windows movie maker that I have edited, to halfway through the movie, the movie freezes and won't play any more, although I have yet to play clips. Can anyone has any ideas on how I fix? Thanks ():

  =============================================
  I guess you have a problem with incompatible
  files sources... the most reliable formats to use are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wmv, wav

  The following articles may be useful:

  Type of file with Movie Maker compatibility
  http://www.myvideoproblems.com/tutorials/MovieMaker/File_type_compatibility.htm

  What file type should I use in Movie Maker?
  http://www.myvideoproblems.com/tutorials/MovieMaker/WhichFileTypeInMovieMaker.htm

  John Inzer - MS - MVP - digital media experience

• My Windows Movie Maker won't let me publish my movie... Help!

  I tried to publish my movie I did on Windows Movie Maker to my computer, but about 65% in edition, it stops and says:

  "Windows Movie Maker cannot publish the movie to the specified location.  Check that the payor source in your movie files are always available, that the publishing location is still available, that there is enough available disk space, and then try again. »

  As far as I know, all mentioned in the post is fine (I checked all original source files, I tried different locations of publication, and I know that there is enough disk space, because the video is only about 2 and a half minutes), but I always get the message when it reaches 65%.  I have looked through many forums on Windows Movie Maker does not, but none of them does not seem to answer my question.

  Help, please!

  I tried to publish my movie I did on Windows Movie Maker to my computer, but about 65% in edition, it stops and says:

  "Windows Movie Maker cannot publish the movie to the specified location.  Check that the payor source in your movie files are always available, that the publishing location is still available, that there is enough available disk space, and then try again. »

  As far as I know, all mentioned in the post is fine (I checked all original source files, I tried different locations of publication, and I know that there is enough disk space, because the video is only about 2 and a half minutes), but I always get the message when it reaches 65%.  I have looked through many forums on Windows Movie Maker does not, but none of them does not seem to answer my question.

  Help, please!

  =============================
  Just some thoughts...

  This happens usually when the source files are
  not totally compatible and also may be linked
  transitions.

  In Movie Maker, you could try to go into tools.
  Options / Compatibility tab and disable all
  the filters.

  Also you can try to convert your source files
  to different formats.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  And you can try to remove the transitions.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker cannot complete publish movie

  Everytime I try to publish my movie in Windows movie maker in ANY type of format or quality or size or anything I get this message.

  Windows Movie Maker cannot publish the movie to the specified location. Check the original source files used in your movie are still available, that the publishing location is still available, that there is enough available disk space, and then try again.

  It's all the source files are still in use, and I don't have any changed or moved to new locations since I imported in WMM.

  The publish location is my office then yes its still there.

  I have more than 170 GB left on my C drive, and this video is only about 600 MB in the best format possible.

  So I try and try again and I can't seem to post in any size, any quality or any place on my computer.

  Help, please.

  Hello Rann601,

  Thanks for posting on the Microsoft answers Forum.

  From another forum:http://www.windowsmoviemakers.net/Forums/ShowPost.aspx?PostID=196593#196593
  This seemed to help others.

  Please visit the following Web to download the latest version of Xvidand see if that will help solve your problem for your error: Movie Maker cannot publish the movie to the specified location. Check the original source files used in your movie are still available, that the publishing location is still available, that there is enough available disk space, and then try again.

  http://www.XviD.org/downloads.15.0.html

  If please post again and let us know if this patch has solved your problem.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.