IGMP over a VPN connection.

Similar Questions

• Cannot change network over the VPN connection components

  Hi all

  I set up a VPN in windows XP Service Pack 3 with all latest updates.  When I display the properties of the VPN connection, there is a tab labeled "Networking".  When I click on the tab networking that I get an error message pop up that says: "Unable to allow the editing of networkingcomponents at the moment because they are being modified elsewhere."  I restarted and also tried to search and stop the services dealing with virtual private networks, etc. nothing works.

  Can someone help me troubleshoot or identify what prevents me to change my network layout tab?  There is virtually no information on the internet addressing it.

  Thanks in advance!

  Hi Amish_Robot,

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• VPN connection question

  In my workplace, there are two networks is the local LAN that connect other computers to the internet and the wireless network which my computer connect to and is directly to the internet, my question is that is it possible to connect to the LAN over the internet using the connection V P N if yes how? Please help me because whenever I want to read my emails, I have to put the UTP cable which will be sometimes annoying.
  Please indicate all the measures that are needed to establish the VPN connection.

  Ask it professionals about your place of work.  They know what is possible and what is not.

  Where I work, there is an available VPN that allows connections to the LAN from outside work.  If I use a laptop computer provided by the company, access the LAN just as if I'm at work.  If I use my PC, I get a link that allows me to access a limited number of resources, such as the email of the company.  I can, however, DRC to my desktop at work PC and can get access to the local network.

• I can't access my email works through outlook over a VPN. The signin VPN works ok, I can see my network co., but can not use outlook. 'Microsoft Exchange Server' reported an error (0 x 80040115)

  prospects for bt infinity

  I recently changed my home to infinity of BT broadband.  Now I can't access my email works through outlook over a VPN.  The signin VPN works ok, I can see my network co., but can not use outlook.   I get the following error at startup of outlook.

  Task 'Microsoft Exchange Server' reported an error (0 x 80040115): ' the connection to the Microsoft Exchange Server is unavailable.  Outlook must be online or connected to complete this action. »

  Anyone have any ideas?

  Allan M

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Kind regards

  Ramata Thakur

• Unable to connect to computers via Remote Desktop on the VPN connection.

  I have a Windows Server 2003 Active Directory network. Connect you to it remotely using an appliance, Sonicwall TZ170 VPN/Firewall DHCP pointing our internal DHCP server so we do not use the Sonicwall DHCP over VPN.

  The area has been recently rebuilt completely charge and the VPN connection was stronger than it has ever been when connecting to computers on our network for the first 2 weeks. In the last few days, however, people had problems connecting on our desktop computers. They can connect to some but not to others, and in the case of a person who needs in particular access to a computer, it can not connect to it all.

  I don't think it's a VPN issue but something to do with the DHCP/DNS/domain controller server. However, I am not able to locate the problem.

  In the past, this same thing was a problem before I took over. We had just a matter to the inconsistency of the connection until I thought I had solved the problem (however short-lived the fix was) with the refurbishment of the domain controller.

  Customers are a mix of Windows XP and Windows 7.

  Any ideas? I will provide all the information I can.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Please repost your question in the above Server Forums.

  Here is the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• The VPN client VPN connection behind other PIX PIX

  I have the following problem:

  I wanted to establish the VPN connection the client VPN to PIX on GPRS / 3G, but I didn t have a bit of luck with PIX IOS version 6.2 (2).

  So I upgraded PIX to 6.3 (4) to use NAT - T and VPN client to version 4.0.5

  I have configured PIX with NAT-T(isakmp nat-traversal 20), but I still had a chance, he would not go through the 1st phase. As soon as I took nat-traversal isakmp off he started working, and we can connect to our servers.

  Now, I want to connect to the VPN client behind PIX to our customer PIX network. VPN connection implements without problem, but we can not access the servers. If I configure NAT - T on the two PIX, or only on the customer PIX or only on our PIX, no VPN connection at all.

  If I have to connect VPN client behind PIX to the customer's network and you try to PING DNS server for example, on our PIX, I have following error:

  305006: failed to create of portmap for domestic 50 CBC protocol translation: dst outside:194.x.x.x 10.10.1.x

  194.x.x.x is our customer s address IP PIX

  I understand that somewhere access list is missing, but I can not understand.

  Of course, I can configure VPN site to site, but we have few customers and take us over their servers, so it'd just connect behind PIX VPN and client connection s server, instead of the first dial-in and then establish a VPN connection.

  Can you please help me?

  Thank you in advan

  The following is extracted from ASK THE DISCUSSION FORUM of EXPERTS with Glenn Fullage of Cisco.

  I've cut and pasted here for you to read, I think that the problem mentioned below:

  Question:

  Hi Glenn,.

  Following is possible?

  I have the vpn client on my PC, my LAN is protected by a pix. I can launch the vpn client to connect to remote pix. Authenticates the vpn client and the remote pix makes my PC with the assigned ip appropriate to its pool of ip address.

  The problem that I am facing is that I can not anything across the pix remote ping from my PC which is behind my pix. Can you please guide me what I have to do to make this work, if it is possible?

  My PC has a static ip address assigned with the default gateway appropriate pointing to my s pix inside interface.

  Thank you very much for any help provided in advance.

  Response from Glenn:

  First of all, make sure that the VPN connection works correctly when the remote PC is NOT behind a PIX. If that works fine, but then breaks when put behind a PIX, it is probably that the PIX is PAT, which usually breaks IPSec. Add the following command on your PIX VPN client is behind:

  fixup protocol esp-ike

  See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/df.htm#wp1067379 for more details.

  If it still has issues, you can turn on NAT - T on the remote PIX that ends the VPN, the client and the remote PIX must encapsulate then all IPSec in UDP packets that your PIX will be able to PA correctly. Add the following command on the remote PIX:

  ISAKMP nat-traversal

  See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/gl.htm#wp1027312 for more details.

  NAT - T is a standard for the encapsulation of the UDP packets inot IETF IPSec packets.

  ESP IPSec (Protocol that use your encrypted data packets) is an IP Protocol, it is located just above IP, rather than being a TCP or UDP protocol. For this reason, it has no TCP/UDP port number.

  A lot of features that make the translation of address of Port (PAT) rely on a single to PAT TCP/UDP source port number ' ing. Because all traffic is PAT would be at the same source address, must be certain uniqueness to each of its sessions, and most devices use the port number TCP/UDP source for this. Because IPSec doesn't have one, many features PAT fail to PAT it properly or at all, and the data transfer fails.

  NAT - T is enabled on both devices of the range, they will determine during the construction of the tunnel there is a PAT/NAT device between them, and if they detect that there is, they automatically encapsulate every IPSec packets in UDP packets with a port number of 4500. Because there is now a port number, PAT devices are able to PAT it correctly and the traffic goes normally.

  Hope that helps.

• Internet VPN connection disconnects

  Good afternoon

  I have the Cisco VPN Client and several established connections. When I connect to them I have connected either to the VPN, I can access the network and their teams. But I have a problem on one of the connections and is well connected to the VPN, connect you to servers and other things, but I block internet access to the computer. It is the only link that happens to me.

  The thing is that the internet really works, otherwise it would remain active VPN connection doesn't let me server.

  I noticed in the log and when I try to access that the internet does not connect and the journal starts a loop that reads:

  728 12:59:59.978 25/04/13 Sev = Info/5 IKE / 0 x 63000040

  DPD ACK from xxx.xxx.xxx.xxx, seq # receipt = 2818950532, seq # expected = 2818950532

  729 13:00:09.963 25/04/13 Sev = Info/6 IKE / 0 x 63000055

  Sent a keepalive on the IPSec Security Association

  730 13:00:10.463 25/04/13 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to xxx.xxx.xxx.xxx

  731 13:00:10.463 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment at xxx.xxx.xxx.xxx, our seq # = 2818950533

  732 13:00:10.503 25/04/13 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = xxx.xxx.xxx.xxx

  733 13:00:10.503 25/04/13 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

  734 13:00:10.503 25/04/13 Sev = Info/5 IKE / 0 x 63000040

  DPD ACK from xxx.xxx.xxx.xxx, seq # receipt = 2818950533, seq # expected = 2818950533

  735 13:00:19.977 25/04/13 Sev = Info/6 IKE / 0 x 63000055

  Sent a keepalive on the IPSec Security Association

  736 13:00:20.978 25/04/13 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to xxx.xxx.xxx.xxx

  737 13:00:20.978 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment at xxx.xxx.xxx.xxx, our seq # = 2818950534

  738 13:00:25.986 25/04/13 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to xxx.xxx.xxx.xxx

  739 13:00:25.986 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment at xxx.xxx.xxx.xxx, our seq # = 2818950535

  740 13:00:29.991 25/04/13 Sev = Info/6 IKE / 0 x 63000055

  Sent a keepalive on the IPSec Security Association

  ..............

  2422 14:20:31.267 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment a.yyy, our seq # = 2261259166

  2423 14:20:31.297 25/04/13 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = .yyy

  2424 14:20:31.297 25/04/13 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

  2425 14:20:31.297 25/04/13 Sev = Info/5 IKE / 0 x 63000040

  From DPD ACK.yyy, seq # receipt = 2261259166, seq # expected = 2261259166

  2426 14:20:41.782 25/04/13 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) a.yyy

  2427 14:20:41.782 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment a.yyy, our seq # = 2261259167

  2428 14:20:41.812 25/04/13 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = .yyy

  2429 14:20:41.812 25/04/13 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

  2430 14:20:41.812 25/04/13 Sev = Info/5 IKE / 0 x 63000040

  From DPD ACK.yyy, seq # receipt = 2261259167, seq # expected = 2261259167

  2431 14:20:52.299 25/04/13 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) a.yyy

  2432 14:20:52.299 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment a.yyy, our seq # = 2261259168

  2433 14:20:52.329 25/04/13 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = .yyy

  2434 14:20:52.329 25/04/13 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="" yyy.yyy.yyy.yyy="" isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

  2435 14:20:52.329 25/04/13 Sev = Info/5 IKE / 0 x 63000040

  From DPD ACK.yyy, seq # receipt = 2261259168, seq # expected = 2261259168

  2436 14:21:02.811 25/04/13 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) a.yyy

  2437 14:21:02.814 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment a.yyy, our seq # = 2261259169

  ..............

  4807 16:03:35.041 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment a.yyy, our seq # = 2261259640

  4808 16:03:35.071 25/04/13 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = .yyy

  4809 16:03:35.071 25/04/13 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

  4810 16:03:35.071 25/04/13 Sev = Info/5 IKE / 0 x 63000040

  From DPD ACK.yyy, seq # receipt = 2261259640, seq # expected = 2261259640

  4811 16:03:45.537 25/04/13 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) a.yyy

  4812 16:03:45.537 25/04/13 Sev = Info/6 IKE/0x6300003D

  Request DPD shipment a.yyy, our seq # = 2261259641

  4813 16:03:45.567 25/04/13 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = .yyy

  4814 16:03:45.567 25/04/13 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

  4815 16:03:45.567 25/04/13 Sev = Info/5 IKE / 0 x 63000040

  From DPD ACK.yyy, seq # receipt = 2261259641, seq # expected = 2261259641

  And forever... I tried to contact the technicians have the VPN server, but it is said that everything is correct and that it's something on my network.

  I have on my network I have no firewall between the two, or the router.

  When I log in, I get an Ip address, for example:

  IP: 192168118105

  Mask: 255.255.252.0

  Default gateway: 192.168.116.1.

  But I can't even ping the gateway! Also gives me a DNS set:

  -192.168.24.170

  -192.168.24.171

  But I get the DNS either!

  It also gives me as a primary WINS server

  -10.6.1.92

  And as a child:

  -10.168.100.92

  Anyway, the idea is to connect to the internet through the computer on which the VPN, the VPN, then remote desktop connection to connect through a test server. But then, when I connect to the cuts VPN had my office remotely via internet!

  I spoke with them several times since my network I see NOTHING unusual, indeed, none of the other connections gives me problems, just that.

  Another thing I noticed is that the status option-> statistics-> details of the itinerary, routes secured me give the IP 0.0.0.0 and other VPN connections give me some Ip address...

  I also checked the possibility of IPSec over UDP (NAT / PAT)...

  Any idea which could be at fault?

  Thanks in advance, Bye!

  Hi David,

  You mentioned "one other thing I noticed, is that the status option-> statistics-> details of the route, as Secured routes gives me the IP 0.0.0.0 and other VPN connections give me an IP... "This means that there is no split tunneling configured on the VPN server. "Details of the route section defines the destinations that you will be able to access the VPN and it is pushed by the VPN server.

  So, if you see 0.0.0.0 in the section above, all the traffic from your computer, on the VPN server, including internet traffic tunnel. Two possibilities:

  -C' is the expected flow, should work if the VPN server required the config to route internet traffic.

  "- If not and you use only the VPN to access to certain resources and the internet should still work locally, in this case end of VPN server config must be modified split tunnel configuration so that it instead of pushing ' 0.0.0.0 ' route sends a route as"x.x.x.x"where"x.x.x.x"is the resource behind the VPN tunnel. In this way, the internet works locally.

  Whatever it is, it's a matter of end of VPN server config.

  Simple explanation of the split tunneling:

  http://en.Wikipedia.org/wiki/Split_tunneling

  HTH.

  -

  Sourav

• CLIENT VPN connection OK &amp; PING OK but no INTERNET or LAN

  Hello

  After spending too much time to make it work on a router configured and cannot do work and using too much of your time, I decide to test my installation again on a fresh clean router.

  Why I do that before, it took me only 15 minutes to create this script (out of my mind), I know that you will do in 5 minutes or less, but I'm new to this world of CISCO.

  The installation program is to follow:

  TESTLAB:

  NAS (DIFFICULTY IP 192.168.0.100/24)-> C2691, F0 F0/1 (FIX IP (DHCP = IP OF THE ISP) 192.168.0.1/24)/0-> INTERNET-> COMPUTER (MAC BOOK PRO)

  With the bellows of script, when I connect a computer to the side LAN of ROUTER (F0/1), I get an IP address from the DHCP server, I am able to see everything on my LAN, go to the INTERNET, so this does not work well.

  On another network, I am able to do a VPN over the INTERNET connection at my home testlab, but:

  I can PING 192.168.0.1 (ROUTER) and 192.168.0.100 (SIN), but I do not have access to the INTERNET or to the NAS on my LAN TESTLAB.

  I'm sure what I lack only a single line in an ACL or IP ROUTE, but I have no idea.

  Thus, if one of you can give me some advice, you are welcome

  Here below, I give you the script and the JOURNAL when I'm logged in, I do not delete any information, you will be able to see the real IP, it's just a TESTLAB.

  Best regards

  Didier

  Router #sh run

  Building configuration...

  Current configuration: 2297 bytes

  !

  version 12.4

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  router host name

  !

  boot-start-marker

  boot system flash: c2691-adventerprisek9 - mz.124 - 5a .bin

  boot-end-marker

  !

  AAA new-model

  !

  AAA authentication login userauthen local

  AAA authorization groupauthor LAN

  !

  AAA - the id of the joint session

  !

  resources policy

  !

  IP cef

  !

  !

  No dhcp use connected vrf ip

  DHCP excluded-address IP 192.168.0.1

  !

  pool of dhcp IP LAN

  import all

  network 192.168.0.0 255.255.255.0

  !

  Fax fax-mail interface type

  0 username cisco password Cisco

  !

  crypto ISAKMP policy 3

  BA 3des

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group 3000client

  key cisco123

  DNS 8.8.8.8

  domain cisco.com

  pool ippool

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  !

  Crypto-map dynamic dynmap 10

  Set transform-set RIGHT

  !

  map clientmap client to authenticate crypto list userauthen

  card crypto clientmap isakmp authorization list groupauthor

  client configuration address map clientmap crypto answer

  10 ipsec-isakmp crypto map clientmap Dynamics dynmap

  !

  interface FastEthernet0/0

  DHCP IP address

  NAT outside IP

  IP virtual-reassembly

  automatic speed

  Half duplex

  clientmap card crypto

  !

  interface Serial0/0

  no ip address

  Shutdown

  !

  interface FastEthernet0/1

  the IP 192.168.0.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  automatic speed

  Half duplex

  !

  interface Serial1/0

  no ip address

  Shutdown

  series 0 restart delay

  No terminal-dce-enable-calendar

  !

  interface Serial1/1

  no ip address

  Shutdown

  series 0 restart delay

  No terminal-dce-enable-calendar

  !

  interface Serial1/2

  no ip address

  Shutdown

  series 0 restart delay

  No terminal-dce-enable-calendar

  !

  interface Serial1/3

  no ip address

  Shutdown

  series 0 restart delay

  No terminal-dce-enable-calendar

  !

  IP local pool ippool 14.1.1.100 14.1.1.200

  !

  IP http server

  no ip http secure server

  overload of IP nat inside source list NAT interface FastEthernet0/0

  !

  IP access-list standard NAT

  allow a

  !

  control plan

  !

  Dial-peer cor custom

  !

  Line con 0

  transportation out all

  Speed 115200

  line to 0

  transportation out all

  line vty 0 4

  transport of entry all

  transportation out all

  !

  end

  To CONNECT the VPN CLIENT:

  Cisco Systems VPN Client Version 4.9.01 (0100)

  Copyright (C) 1998-2006 Cisco Systems, Inc. All rights reserved.

  Type of client: Mac OS X

  Running: the Darwin 10.6.0 Darwin kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:XNU-1504.9.26~3/RELEASE_I386 i386

  1 08:04:22.991 27/01/2011 Sev = Info/4 CM / 0 x 43100002

  Start the login process

  2 08:04:22.992 27/01/2011 Sev = WARNING/2 CVPND / 0 x 83400011

  Send error - 28 package. ADR DST: 0x0AD337FF, ADR Src: 0x0AD33702 (DRVIFACE:1158).

  3 08:04:22.992 27/01/2011 Sev = WARNING/2 CVPND / 0 x 83400011

  Send error - 28 package. ADR DST: 0x0A2581FF, ADR Src: 0x0A258102 (DRVIFACE:1158).

  4 08:04:22.992 27/01/2011 Sev = Info/4 CM / 0 x 43100004

  Establish a connection using Ethernet

  5 08:04:22.992 27/01/2011 Sev = Info/4 CM / 0 x 43100024

  Attempt to connect with the server "81.83.202.36".

  6 08:04:22.992 27/01/2011 Sev = Info/4 CVPND / 0 x 43400019

  Separation of privileges: binding to the port: (500).

  7 08:04:22.992 27/01/2011 Sev = Info/4 CVPND / 0 x 43400019

  Separation of privileges: binding to the port: (4500).

  8 08:04:22.993 27/01/2011 Sev = Info/6 IKE/0x4300003B

  Attempts to establish a connection with 81.83.202.36.

  9 08:04:23.072 27/01/2011 Sev = Info/4 IKE / 0 x 43000013

  SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) at 81.83.202.36

  10 08:04:23.203 27/01/2011 Sev = Info/5 IKE/0x4300002F

  Received packet of ISAKMP: peer = 81.83.202.36

  11 08:04:23.204 27/01/2011 Sev = Info/4 IKE / 0 x 43000014

  RECEIVING< isakmp="" oak="" ag="" (sa,="" vid(unity),="" vid(dpd),="" vid(?),="" vid(xauth),="" vid(nat-t),="" ke,="" id,="" non,="" hash,="" nat-d,="" nat-d)="" from="">

  12 08:04:23.204 27/01/2011 Sev = Info/5 IKE / 0 x 43000001

  Peer is a compatible peer Cisco-Unity

  13 08:04:23.204 27/01/2011 Sev = Info/5 IKE / 0 x 43000001

  Peer supports the DPD

  14 08:04:23.204 27/01/2011 Sev = Info/5 IKE / 0 x 43000001

  Peer supports DWR and text DWR

  15 08:04:23.204 27/01/2011 Sev = Info/5 IKE / 0 x 43000001

  Peer supports XAUTH

  16 08:04:23.204 27/01/2011 Sev = Info/5 IKE / 0 x 43000001

  Peer supports NAT - T

  17 08:04:23.282 27/01/2011 Sev = Info/6 IKE / 0 x 43000001

  IOS Vendor ID successful construction

  18 08:04:23.282 27/01/2011 Sev = Info/4 IKE / 0 x 43000013

  SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) at 81.83.202.36

  19 08:04:23.282 27/01/2011 Sev = Info/4 IKE / 0 x 43000083

  IKE port in use - Local Port = 0x01F4, Remote Port = 0x01F4

  20 08:04:23.282 27/01/2011 Sev = Info/5 IKE / 0 x 43000072

  Automatic NAT detection status:

  Remote endpoint is NOT behind a NAT device

  This effect is NOT behind a NAT device

  21 08:04:23.282 27/01/2011 Sev = Info/4 CM/0x4310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  22 08:04:23.290 27/01/2011 Sev = Info/5 IKE/0x4300002F

  Received packet of ISAKMP: peer = 81.83.202.36

  23 08:04:23.290 27/01/2011 Sev = Info/4 IKE / 0 x 43000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">

  24 08:04:23.290 27/01/2011 Sev = Info/5 IKE / 0 x 43000045

  Answering MACHINE-LIFE notify has value of 86400 seconds

  25 08:04:23.290 27/01/2011 Sev = Info/5 IKE / 0 x 43000047

  This SA was already alive for 1 second, expiration of adjustment to 86399 seconds now

  26 08:04:23.294 27/01/2011 Sev = Info/5 IKE/0x4300002F

  Received packet of ISAKMP: peer = 81.83.202.36

  27 08:04:23.294 27/01/2011 Sev = Info/4 IKE / 0 x 43000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" del)="" from="">

  28 08:04:23.296 27/01/2011 Sev = Info/5 IKE/0x4300002F

  Received packet of ISAKMP: peer = 81.83.202.36

  29 08:04:23.296 27/01/2011 Sev = WARNING/2 IKE / 0 x 83000062

  Attempt to inbound connection from 81.83.202.36. Incoming connections are not allowed.

  30 08:04:23.298 27/01/2011 Sev = Info/5 IKE/0x4300002F

  Received packet of ISAKMP: peer = 81.83.202.36

  31 08:04:23.298 27/01/2011 Sev = Info/4 IKE / 0 x 43000014

  RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

  32 08:04:23.298 27/01/2011 Sev = Info/4 CM / 0 x 43100015

  Launch application xAuth

  33 08:04:23.416 27/01/2011 Sev = Info/4 IPSEC / 0 x 43700008

  IPSec driver started successfully

  34 08:04:23.416 27/01/2011 Sev = Info/4 IPSEC / 0 x 43700014

  Remove all keys

  35 08:04:23.416 27/01/2011 Sev = Info/6 IPSEC/0x4370002C

  Sent 29 packages, 0 were fragmented.

  36 08:04:27.320 27/01/2011 Sev = Info/4 CM / 0 x 43100017

  xAuth application returned

  37 08:04:27.320 27/01/2011 Sev = Info/4 IKE / 0 x 43000013

  SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to 81.83.202.36

  38 08:04:27.333 27/01/2011 Sev = Info/5 IKE/0x4300002F

  Received packet of ISAKMP: peer = 81.83.202.36

  39 08:04:27.333 27/01/2011 Sev = Info/4 IKE / 0 x 43000014

  RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

  40 08:04:27.333 27/01/2011 Sev = Info/4 IKE / 0 x 43000013

  SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to 81.83.202.36

  41 08:04:27.333 27/01/2011 Sev = Info/4 CM/0x4310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  42 08:04:27.334 27/01/2011 Sev = Info/4 IKE / 0 x 43000013

  SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to 81.83.202.36

  43 08:04:27.351 27/01/2011 Sev = Info/5 IKE/0x4300002F

  Received packet of ISAKMP: peer = 81.83.202.36

  44 08:04:27.351 27/01/2011 Sev = Info/4 IKE / 0 x 43000014

  RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

  45 08:04:27.351 27/01/2011 Sev = Info/5 IKE / 0 x 43000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 14.1.1.101

  46 08:04:27.351 27/01/2011 Sev = Info/5 IKE / 0 x 43000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 8.8.8.8

  47 08:04:27.351 27/01/2011 Sev = Info/5 IKE / 0 x 83000017

  MODE_CFG_REPLY: The attribute (INTERNAL_ADDRESS_EXPIRY) and the (134744072) value received is not supported

  48 08:04:27.351 27/01/2011 Sev = Info/5 IKE/0x4300000D

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000000

  49 08:04:27.351 27/01/2011 Sev = Info/5 IKE/0x4300000E

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = cisco.com

  50 08:04:27.351 27/01/2011 Sev = Info/5 IKE / 0 x 83000015

  MODE_CFG_REPLY: Attribute received no data MODECFG_UNITY_SPLITDNS_NAME

  51 08:04:27.351 27/01/2011 Sev = Info/4 CVPND / 0 x 43400018

  Separation of privileges: opening file: (/ etc/opt/cisco-vpnclient/Profiles/DRI.pcf).

  52 08:04:27.352 27/01/2011 Sev = Info/5 IKE/0x4300000E

  MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = software Cisco IOS, software 2600 (C2691-ADVENTERPRISEK9-M), Version 12.4(5a), VERSION of the SOFTWARE (fc3)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2006 by Cisco Systems, Inc.

  Last updated Sunday, January 14, 06 05:00 by alnguyen

  53 08:04:27.352 27/01/2011 Sev = Info/4 CM / 0 x 43100019

  Data in mode Config received

  54 08:04:27.353 27/01/2011 Sev = Info/4 IKE / 0 x 43000056

  Received a request from key driver: local IP = 81.83.203.94, GW IP = 81.83.202.36, Remote IP = 0.0.0.0

  55 08:04:27.353 27/01/2011 Sev = Info/4 IKE / 0 x 43000013

  SEND to > ISAKMP OAK QM * (HASH, SA, NO, ID, ID) to 81.83.202.36

  56 08:04:27.359 27/01/2011 Sev = Info/4 IPSEC / 0 x 43700014

  Remove all keys

  57 08:04:27.371 27/01/2011 Sev = Info/5 IKE/0x4300002F

  Received packet of ISAKMP: peer = 81.83.202.36

  58 08:04:27.371 27/01/2011 Sev = Info/4 IKE / 0 x 43000014

  RECEIVING< isakmp="" oak="" qm="" *(hash,="" sa,="" non,="" id,="" id,="" notify:status_resp_lifetime)="" from="">

  59 08:04:27.371 27/01/2011 Sev = Info/5 IKE / 0 x 43000045

  Answering MACHINE-LIFE notify has value of 3600 seconds

  60 08:04:27.371 27/01/2011 Sev = Info/5 IKE / 0 x 43000046

  Answering MACHINE-LIFE notification has the value 4608000 kb

  61 08:04:27.371 27/01/2011 Sev = Info/4 IKE / 0 x 43000013

  SEND to > ISAKMP OAK QM * (HASH) at 81.83.202.36

  62 08:04:27.371 27/01/2011 Sev = Info/5 IKE / 0 x 43000059

  IPsec Security Association of loading (MsgID = SPI OUTBOUND SPI INCOMING = 0x289044F5 0xA3A7DAF8 = 1DBA3942)

  63 08:04:27.372 27/01/2011 Sev = Info/5 IKE / 0 x 43000025

  OUTGOING ESP SPI support: 0xA3A7DAF8

  64 08:04:27.372 27/01/2011 Sev = Info/5 IKE / 0 x 43000026

  Charges INBOUND ESP SPI: 0x289044F5

  65 08:04:27.372 27/01/2011 Sev = Info/4 CM/0x4310001A

  A secure connection established

  66 08:04:27.372 27/01/2011 Sev = Info/4 CVPND/0x4340001E

  Separation of privileges: reduce the MTU on the main interface.

  67 08:04:27.373 27/01/2011 Sev = Info/4 CVPND/0x4340001B

  Separation of privileges: /etc/resolv.conf file backup.

  68 08:04:27.373 27/01/2011 Sev = Info/4 CVPND/0x4340001D

  Separation of privileges: chown (/ var/run/resolv.conf.vpnbackup, uid = 0 gid = 1).

  69 08:04:27.373 27/01/2011 Sev = Info/4 CVPND / 0 x 43400018

  Separation of privileges: opening file: (/ var/run/resolv.conf).

  70 08:04:27.377 27/01/2011 Sev = Info/4 CM/0x4310003B

  Look at address added to 81.83.203.94.  Current host name: d5153cb5e.access.telenet.be, current address (s): 81.83.203.94, 10.211.55.2, 10.37.129.2.

  71 08:04:27.860 27/01/2011 Sev = Info/4 IPSEC / 0 x 43700010

  Creates a new key structure

  72 08:04:27.860 27/01/2011 Sev = Info/4 IPSEC/0x4370000F

  Adding key with SPI = 0xf8daa7a3 in the list of keys

  73 08:04:27.860 27/01/2011 Sev = Info/4 IPSEC / 0 x 43700010

  Creates a new key structure

  74 08:04:27.860 27/01/2011 Sev = Info/4 IPSEC/0x4370000F

  Adding key with SPI = 0xf5449028 in the list of keys

  75 08:04:37.360 27/01/2011 Sev = Info/4 IKE / 0 x 43000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to 81.83.202.36

  76 08:04:37.360 27/01/2011 Sev = Info/6 IKE/0x4300003D

  Sending DPD request to 81.83.202.36, our seq # = 2293347010

  77 08:04:37.382 27/01/2011 Sev = Info/5 IKE/0x4300002F

  Received packet of ISAKMP: peer = 81.83.202.36

  78 08:04:37.382 27/01/2011 Sev = Info/4 IKE / 0 x 43000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

  79 08:04:37.382 27/01/2011 Sev = Info/5 IKE / 0 x 43000040

  DPD ACK from 81.83.202.36, seq # receipt = 2293347010, seq # expected = 2293347010

  80 08:04:47.859 27/01/2011 Sev = Info/4 IKE / 0 x 43000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to 81.83.202.36

  81 08:04:47.860 27/01/2011 Sev = Info/6 IKE/0x4300003D

  Sending DPD request to 81.83.202.36, our seq # = 2293347011

  82 08:04:47.867 27/01/2011 Sev = Info/5 IKE/0x4300002F

  Received packet of ISAKMP: peer = 81.83.202.36

  83 08:04:47.867 27/01/2011 Sev = Info/4 IKE / 0 x 43000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

  84 08:04:47.867 27/01/2011 Sev = Info/5 IKE / 0 x 43000040

  DPD ACK from 81.83.202.36, seq # receipt = 2293347011, seq # expected = 2293347011

  85 08:05:03.865 27/01/2011 Sev = Info/4 IKE / 0 x 43000013

  SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to 81.83.202.36

  86 08:05:03.865 27/01/2011 Sev = Info/6 IKE/0x4300003D

  Sending DPD request to 81.83.202.36, our seq # = 2293347012

  87 08:05:03.872 27/01/2011 Sev = Info/5 IKE/0x4300002F

  Received packet of ISAKMP: peer = 81.83.202.36

  88 08:05:03.872 27/01/2011 Sev = Info/4 IKE / 0 x 43000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

  89 08:05:03.872 27/01/2011 Sev = Info/5 IKE / 0 x 43000040

  DPD ACK from 81.83.202.36, seq # receipt = 2293347012, seq # expected = 2293347012

  You must configure split tunnel as well as the NAT ACL must refuse/free of traffic between the local network to IP Pool as follows:

  (1) create split tunnel ACL:

  access-list 150 permit ip 192.168.0.0 0.0.0.255 14.1.1.0 0.0.0.255

  ISAKMP crypto client configuration group 3000client

  ACL 150

  (2) you must configure an ACL extended for NAT:

  access-list 170 deny ip 192.168.0.0 0.0.0.255 14.1.1.0 0.0.0.255

  access-list 170 allow ip 192.168.0.0 0.0.0.255 any

  overload of IP nat inside source list 170 interface FastEthernet0/0

  no nat ip inside the source list NAT interface FastEthernet0/0 overload

  clear the ip nat trans *.

  Hope that solves this problem.

• Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall

  Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall, waiting for quick reply

  Hi cmscan,

  Thank you for using communities of Apple Support.

  I see that you add a VPN connection using IKEv2, but you do not have the remote ID. I know it's important to be able to set up a virtual private network, you can connect using your iPhone. I'm happy to help you with this.

  You must contact your system administrator to ensure that the settings that you must configure the VPN connection. Please see the iPhone user Guide for more information.

  Have a great day!

• VPN connection error - pppd limited

  Hi I think I have a problem with OX, the captain and the networks, I sail perfectly with the team but since update stops running the VPN, I tried the possibility to go to recovery mode to 'disable csrutil' then ' sudo chmod u + s / usr / sbin / pppd "but it does not work when you use Netextender or FortiClient." I have another Mac with Lion and works properly the only difference I notice in the file 'pppd' Captain makes me 'limited, compressed' and only 'compressed' Lion I put a photo and a newspaper of netextender:

  15/09/2016 10:15:59.271 [603 General info] NetExtender 8.1.788 for Mac OS X initialized

  15/09/2016 path of the bundle app NetExtender 10:15:59.299 [General info 603] = /Applications/NetExtender.app

  15/09/2016 createLogPanel() 10:16:01.045 [gui info 603]

  15/09/2016 10:16:01.730 [config info 603] loading saved profiles...

  15/09/2016 10:16:16.507 [connect info 603] user: "prueba".

  15/09/2016 10:16:16.507 [connect info 603] domain: "abcd.hos."

  15/09/2016 10:16:16.509 [connect info 603] Server: 'vpn.abcd.es:444 '.

  15/09/2016 10:16:16.581 [603 general notice] connection to vpn.abcd.es:444...

  15/09/2016 10:16:16.820 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:16.821 [General notice 603] retry...

  15/09/2016 10:16:16.822 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:16.823 [General error 603] authentication failed: connection failed. See the log for more details.

  15/09/2016 10:16:16.823 [General error 603] NetExtender connection failed.

  15/09/2016 10:16:16.823 [General notice 603] SSL VPN disconnect...

  15/09/2016 10:16:17.058 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:17.058 [General notice 603] retry...

  15/09/2016 10:16:17.060 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:17.061 [General error 603] disconnect command failed

  15/09/2016 10:16:17.063 [General notice 603] SSL VPN connection is completed.

  15/09/2016 10:16:17.063 [config info 603] loading saved profiles...

  15/09/2016 10:16:17.065 [gui info 603] connection failed. See the log for more details.

  

  I think that the problem is a network file or because I put the wrong password and I cannot detect this error. as I said the VPN working properly with another MAC using the same network.

  Help...

  You shouldn't be messing with the security features of the operating system.

  Problems may have to do with the network, or client software that you use.

  I start by making sure all the software are updated and then create a new entry, vpn, double control system that everything has been entered correctly.

  FWIW, I use the built-in features of VPN on El Capitan to connect to my University regularly and without problem.

  I'm not familiar with "Fortinet", and I suspect that you may need to be updated, or simply use the built-in VPN.

• Mac OS El Capitan cannot share a VPN connection that is type of IKEv2

  I have a few VPN connections, I share via Wi - Fi on my mobile device. Here's what I do:

  I have a Macbook Pro with Ethernet port, I have some work VPN connections (some type of IPSec, some IKEv2). First I plug the cable to the Ethernet port, then I start a VPN (settings-> network-> Connect) connection, finally, I share the VPN (settings-> sharing-> Internet sharing) via Wi - Fi connection so that my mobile device can connect and use the VPN connection.

  This work really well for me with IPSec VPN connections. But today, I tried to switch to an IKEv2 VPN connection, the VPN works well, but I can't share it on a mobile device via Wi - Fi, because I couldn't see the connection in the list "share your connection from" (Preferences-> sharing-> Internet sharing system)

  Are there any technical problem that IKEv2 cannot be shared? Or is there that all parameters must be made so that all VPN connections must appear in the list to share?

  evpn https://support.purevpn.com/IKEv2-Configuration-Guide-for-OS-x-El-Capitan-by-pur

• VPN connection: An unexpected error has occurred.

  I am suddenly unable to get my built-in VPN connection works on my iMac with OS X 10.11.5.  I get the VPN connection message: an unexpected error has occurred.  I have been using this VPN configuration to connect to work for several months with success.

  But last week (and I do not know if it had nothing to do with it), I went on vacation and used a free wi - fi setup of Tim Hortons.  I had a LOT of trouble getting the next login page, and I checked all playing with different settings of network without success.  When a change did not work, I put it to its original setting.  Finally, I learned to use Safari to access the free WiFi connection page of Tim.  Then once connected, everything was OK.

  But when I returned a week later and if necessary, to start my VPN connection to access the work, it wouldn't start.  I checked and recheck all my settings preferably of different network, but did not find those who were wrong.  I even deleted and re-entered my VPN service definition without solving the problem.

  Thinking that the problem could be the newly installed ISP of Bell equipment (we went from Rogers while I was away), I used my BlackBerry smartphone (issued by my employer) to create a wi - fi hotspot and accessed to the internet using this connection which completely ignored my home ISP equipment.  But still, I was unable to establish a VPN connection.

  I then tried my iPad VPN connection, and it worked!  Then, I defined a VPN service on the iMac to my wife and the iMac to my daughter and was able to successfully establish a VPN connection to my work very well, using exactly the same VPN configuration.  This led me to the conclusion, it was a problem on my iMac (and not with my new ISP or VPN system of my work that had none of the changes you made), but I still can't find what is "broken".  I run Onyx for my iMac OS X 10.11.5 and repaired permissions and clean the cache and all the rest she is doing to "solve" problems.  But the problem persisted.

  Is there a preference file corrupted somewhere (scan option is no longer on the current version of the Onyx for a reason any)?

  I still have a network setting wrong somewhere I need to go back to the system is correct value?

  Here is the attempt to VPN from the file system.log (with some hidden values in the case where they display my work VPN access):

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: received an order to start SystemUIServer [257]

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: changed to connecting status

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: phase 1 of the IPSec from.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: agreed to the takeover of vpn connection.

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: connection.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec Phase 1 started (initiated by me).

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: bind 1 (cannot assign requested address)

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: sendfromto failed

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: Phase 1 negotiation failed due to the error of sending. 94437eb7d5b1b6e8:0000000000000000

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: can not send packets

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IKE Packet: send failed. (Initiator, aggressive Mode 1 Message).

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: Controller IPSec: IKE FAILED. Phase 1, assert 0

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed by disconnecting

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec disconnection from the server 142.201.5.6

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec disconnection from the server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 3 times-

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed to offline, terminus right no

  Any help or insight would be more useful and appreciated... so that I can work from home again.

  Thank you

  Myron VanderLaan

  I finally found my VPN problem.

  There is a 'racoon' file that is generated when I connect to the VPN to my work site.

  I have created a modified version of this file so that my connection does not expire in 3600 seconds (changed in 24 hours).

  Apparently, there are some slightly different settings (such as certain IP addresses other than VPN IP of my work) in this file under our new ISP Bell from the former FAI Rogers.

  And if I connect to the WiFi Hotspot from my BlackBerry, it does not once again because these settings in the file are different again.  I must return the file generated instead of my modified file.

  Bad luck!

• Where is the setting to warn that "the information you entered must be sent over an unencrypted connection?

  Where is the setting to warn users to "information you entered must be sent over an unencrypted connection"?

  The settings for warning messages have been removed from the UI (Bug 513166).
  You must change preferences related security.warn_* directly on the topic: config page.
  
  Filter: security.warn

  You can check the security.warn_submit_insecure pref on the topic: config page.

  BTW: Firefox 10.0.3 ESR is not the last.

  • ESR 10.0.x Firefox: http://www.mozilla.org/en-US/firefox/organizations/all.html

• How to set the VPN connection in Windows 7 64 bit?

  Hello

  How can I set up a Vpn connection in Windows 7 x 64 bit.

  Thank you.

  Hello

  Go to the network control panel and Internet-network sharing Center.

  http://www.windows7hacker.com/index.php/2009/08/how-to-set-up-a-VPN-connection-in-Windows-7/

  Note that you need to know the login and the password to access the Internet :)

• Is it possible to get Win 7 auto start VPN connection?

  Hey all,.

  Is it possible to get Windows 7 auto start VPN connection? Or can you recommend a 3rd party VPN client application?

  Thank you

  Hello

  You can make a batch file exe or cmd and autostart. The command line should be like this:

  RASPHONE d * where is * a name of your VPN connection

  For example: your Vpn connection is called my VPN

  The command line will be:

  RASPHONE d my VPN